Addon Status Failed
I have created a small addon in SAP B1 2005 SP01 and register the addon using ard and exe and SAP run my addon and it work fine but in addon manager I get my addon status failed. I have also tried B1DE for creating addon installer but the error still persists.
Please help
Hi Parag,
Yes this is a problem, for sort out this problem, when you are creating installer for your addon you can open the CustomInstallerClass.vb under customerLibrary in your installer project.
and do this change
actual code:
#If Version = "2005" Then
'' Call B1 EndInstallEx, succeeded true
ret = EndInstallEx(targetDir, True)
If (ret <> 0) Then
MsgBox("Error at EndInstallEx(True) call at the end of the AddOn installation: " + targetDir)
End If
#Else
'' Call B1 EndInstall (no parameters)
ret = EndInstall()
If (ret <> 0) Then
MsgBox("Error at EndInstallEx() call at the end of the AddOn installation")
End If
#End If
change it to :
#If Version = "2005" Then
'' Call B1 EndInstallEx, succeeded true
ret = EndInstallEx(targetDir, True)
If (ret <> -1) Then
MsgBox("Error at EndInstallEx(True) call at the end of the AddOn installation: " + targetDir)
End If
#Else
'' Call B1 EndInstall (no parameters)
ret = EndInstall()
If (ret <> 0) Then
MsgBox("Error at EndInstallEx() call at the end of the AddOn installation")
End If
#End If
you have to compare ret to '-1' instead of '0'
after done that change again rebuild your solution, its working fine.
Similar Messages
-
Hi,
I am using OIM 9.1.0.2
When I install the AD connector from Deployment Manager -->Install Connector, It shows the error
DOBJ.XML_IMPORT_ERROR
Unknown tag OBJ_OFFLINED recieved.
Step 2 : Connector Installation
ActiveDirectory 9.1.1.7.0 Installation Status : Failed
Configuration of Connector Libraries
X Import of Connector XML Files (Using Deployment Manager)
X Compilation of Adapter Definitions
Click Retry to retry the installation after correcting the errors.
What needs to be done for this ?
Regards
PraveenWith the introduction of oim 9.1.0.2, the Offline-Line Provisioning attribute was added to the Resource Object. You are trying to import the connector into an environment that is out of date. The solution to this is to open up the XML file, and cut out the XML tag within your resource object for OBJ_OFFLINED and then it should work. But the next issue you are going to run into is most likely the connector version is not supported in your version so it might not work.
-Kevin -
Powerbook G4 HD SMART Status: Failing
My powerbook G4 (1.5GHZ, 1GB RAM, OS 10.3.9)recently runs very slowly, sometimes freezed up during power off process. I checked the activity monitor to see none program hogging the cpu and memory, There are about 37GB free space on the hard drive. Checked the Disk Utility and saw the SMART status: Failing in red letters. Can anyone tell me if that is the sign the HD is going to die soon? If I used the install CDs to reinstall very thing, it will fix the problem or not? Or I just need a new HD? Luckly I was able to backup everything on my Mac to my desktop. Thx
Welcome to the Apple discussions.
That means that it's time to replace the hard drive, as it will fail shortly due to a hardware failure. If you want more detail on what is failing, install Smart Utility from Volitans.
New hard drives are cheap ... good source is Newegg.com, as they have many user reviews, good prices, good service. I've bought drives from them for years, and can recommend them. You'll want a parallel ATA interface 2.5" hard drive. Can't use a serial ATA (SATA) interface hard drive. -
Httpd service does not start- shows status FAILED
Hi,
I have just installed ORACLE ENTERPRISE LINUX UPDATE 5,
now, my issue is when i give the following command , it shows status FAILED.
# service httpd start
starting httpd: [FAILED].
can anybody help me out.
regards,
CharanSeems like your system is not configured correctly.
Are you using the correct user (the same that is the owner of the HTTP software)?
Is there already another process running on the port?
What is the output in the Apache logfiles?
cu
Andreas -
OS 10.5.8 on a 1.8 GHz Power PC G5. Installed Western Digital WD1002FAEX as a second internal hard drive. I also installd the jumper needed to slow HD down for this computer. Initialized and formated the HD was able to back up a large iPhoto file and am still able to acceass the file from the new HD. Now Disk Utility is reporting a fatal hardware error-S.M.A.R.T. status failing. Is there hope?
Is that on your first drive or the new one???
Only experience I had with SMART warning was that in less than 48 hrs it was dead for good. -
Addon has failed to connect to the DI API. Service Not found
Hi
I've upgraded database B1 8.8 SP0 PL11 to B1 8.8 SP0 PL15.
Addon was complied on B1 8.8. SP0 PL11 envrionment.
I've error message when I started addon.
Addon_Name addon has failed to connect to the DI API.
Error Details:
Service not found.
DI API was uninstalled and re installed.
And I deleted SM_OBS_DLL directory.
But I can not resolve this issue.
Please help me,
JoanneHi Joanne,
I had exactly the same problem with patch 15 after an upgrade from 8.8 patch 13. The SBO client didn't automatically update so I had to use Add/Remove programs to remove the old client and DI API and then the new client install failed from the B1_SHR folder with a 1158 error (no description).
What I did to correct it was install the DI API from the <servername>\B1_SHR\B1DIAPI folder and then run the client install afterwards. This time the client install worked fine and I can run addons that use the DI API. I think there was some registry entry issues, maybe with the upgrader or the client installer.
Kind Regards,
Owen -
How to create workflow-status = failed with ContentService?
Hi!
For test-purpose I need a workflow with the status "failed". How can I create one?
greetings
VerenaHi Robert
May this help
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/eddef503944dc6bbe8d81a2cec44e8/frameset.htm">Customising UWL tabs</a>
Check the <a href="https://help.sap.com/javadocs/NW04S/current/uw/index.html">UWL API</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm">Using UWL</a>
http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/ad68c125ae496f8c04a25090bd2e3c/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3e/09df7f284f4fb9b50aaedf80652f4c/frameset.htmhttp://help.sap.com/saphelp_nw2004s/helpdata/en/36/dd4ad73c86412e81e9ce66eeb147e7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
Thanks
Swathi -
Could not send notification 65569 (status 'FAILED')
Customize Workflow runs with 2006 error - only happen in the morning
We have created a customize workflow which works a bit funny here:
When we first run the workflow in the morning, it ends up with this error:
Activity Buyer Notifications
Result Mail
Error Name WFMLRSND_FAILED
Error Message 2006: Could not send notification 65569 (status 'FAILED') to 'CONTRACT SERVICES'.
Error Stack WF_MAIL.GetDocContent(PO_DETAILS_BUYER)
Then, thinking of some problem might happend to the workflow mailer, we run the standard workflow, e.g. PO Approval. It runs successfully and send out the notification email. So, we then run the customise workflow again, and this time it works, no error has been generated as above.
The funny thing is, this had happened more than a week, where every morning I have to somehow run a standard workflow (normally I just create a new PO and send for approval), and got my customize workflow run successfully.
Can someone highlight what's going wrong here?
Is that some setup or soemthing that contribute to this problem?
Thanks,
PatriciaThe notifications are defined in the workflow but they do use a document type attribute (we send a table of data "Job", "Job Name", "Amounts").
We have changed the database packages a lot and that created many problems afterwards so we minimized when we make those changes and we restart everything (database, IAS Server) afterwards.
Here is the email to SYSADMIN:
=========================================================
Subject: Error in Workflow DUNAPIN2/20060323123955x30741282 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
From
To SYSADMIN
Sent 03-APR-06
Due
Notification ID 41121
An Error occurred in the following Workflow.
Item Type = DUNAPIN2
Item Key = 20060323123955x30741282
User Key =20060323123955x30741282
Error Name = WFMLRSND_FAILED
Error Message = 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
Error Stack = &ERROR_STACK
Activity Id = 52557
Activity Label = GET_GENERAL_LEDGER_APPROVAL:NTF_V2_AR_DEPT_OFF_MGR
Result Code = #MAIL
Notification Id = 41119
Assigned User = KKEMPER
Workflow monitor
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
How do you want to Continue?
How do you want to continue?: Abort Resolved Retry Request information
=========================================================
Any help would be greatly appreciated.
Jim -
Sql Server 2008 R2 setup status failed
Hi guys, plz help me when i install Sql2008 i get this error.... plx help me if you have solution...
Thanks in Advance...
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052377
Exit facility code: 1212
Exit error code: 1639
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-03-14 18:21:32
End time: 2014-03-14 18:30:00
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: NIRMAL-PC
Machine processor count: 8
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United Kingdom)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: E:\Software _2\Software _2\SQL2008\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: NIRMAL-PC\sdfg
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2008
INSTANCENAME: SQL2008
ISSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NIRMAL-PC\sdfg
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_as_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\SystemConfigurationCheck_Report.htmHello,
Please try to uninstall SQL Server using YoyoYu suggestions on the following thread:
http://social.msdn.microsoft.com/Forums/en/sqlexpress/thread/4d6158a1-b601-428c-aad4-a1716e76de1a
When finish, re-install SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SMART status failing on a WD Scorpio Black WD3200BEKT 320GB 7200 RPM
I just recently purchased a Western Digital Scorpio Black WD3200BEKT 320GB 7200 RPM drive to put in my 1st Gen MacBook Pro. Ever since installing the drive, I've had random beach balls happen usually when there is a fair amount of disk I/O.
Thinking the drive was bad, I sent it back and got another one. I am still seeing the same frequent beach balls requiring a hard restart to get the system to be responsive again.
Checking the System Profiler, I see that the drive is failing SMART status. I also checked the kernel logs and am getting I/O errors on the drive at the point when the system beach balls.
I am pretty certain it isn't the drive. I'm at a loss for what to try next. Is this drive not compatible with my SATA interface. Any suggestions or comments?
Below are some of my pertinent machine information from System Profiler:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version (system): 1.2f10
Sudden Motion Sensor:
State: Enabled
Below is the Serial-ATA information from the System Profiler:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD3200BEKT-60F3T1:
Capacity: 298.09 GB
Model: WDC WD3200BEKT-60F3T1
Revision: 12.01A12
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
Volumes:
Macintosh HD:
Capacity: 297.77 GB
Available: 153.19 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
I also ran this to check the current speed of the SATA interface since the drive is a SATA II drive with a 3.0gb/s burst.
$ sudo ioreg -l | grep 'Interconnect"="SATA"'
| | | | "Protocol Characteristics" = {"Physical Interconnect"="SATA","Physical Interconnect Location"="Internal/External"}
| | | | "Protocol Characteristics" = {"Physical Interconnect"="SATA","AHCI Port Number"=0,"Physical Interconnect Location"="Internal","Port Speed"="1.5 Gigabit$
| | | | "Protocol Characteristics" = {"Physical Interconnect"="SATA","Physical Interconnect Location"="Internal"}
The above shows that the interface is running at 1.5gb/s SATA I which is what I excepted on this system.
Thanks!
DustinSounds like you have things well sorted out.
Despite that fact that you have had two consecutive HDDs with defects does not, necessarily, mean that all of those drive are defective. However, you are fortunate that you were able to get you money back. Seagate makes good drives, as does WD, and hopefully you have paid your dues and you will have no more incidents.
Do post back should you run into stuff and need to bounce ideas off someone else.
Good luck.
cornelius
I will certainly report back on my luck with Seagate.
You are correct that the failure of two consecutive drives does not mean the whole line is faulty. The drive I was replacing in the MacBook Pro was actually a Western Digital Scopio as well (just not a Blue or Black) and it has performed flawlessly. It's the drive I have reinstalled twice now while I waited for the replacement drive to be shipped.
Another interesting anecdote is that I searched the NewEgg customer comments for reports of SMART errors on the Western Digital Scorpio Black drive I had ordered and sure enough, there were quite a few postings where people had tried multiple times to get a good drive.
It's just one of those things that you start to question, especially with older hardware like I am using (1st Gen MacBook Pro) that maybe backwards compatible quirks between SATA 1 and SATA 2 are the real problem not the drive itself. I'm still not 100% convinced that the drives were the true culprit. Hard to say for sure.
Not to mention all the troubles I've been reading about with 3rd party drives and the recent 1.7 EFI update which has caused similar errors as to what I was seeing with these drives. The first drive I had didn't throw any SMART errors, or at least I didn't notice them.
I'm gonna order the Seagate Momentus 7200.4 ST9320423AS 320GB 7200 RPM 2.5" SATA 3.0Gb/s and see what happens. I'll report back my findings in another thread so that people who search for the Seagate drive will have a more related thread to read.
Dustin -
Addon 9000000X failed with exception; Event type X
Hi SDK experts,
We had a problem with occurrence intermittent, something that we identified with relation on wait of response of event.
The problem is:
My addon need to submit XML files to some webservices. In some cases this files will be send on batches, what causes the response time to events on addon is to much large.
In this cases, when the response time is much large, the B1 overthrow the addon.
In compiled mode the message is not shown. This evidence was achieved on debug time.
The error message is "Addon 90000002 failed with exception; Event type 6"
The paleative solution was implement a thread to release the event. But threads on addons can be a problem.
What the opinions?
We need a solutions. Our addon is a market product for process accounting and fiscal.
regards.
Daniel WeissmannHi,
You may check this thread first:
Addon Crashes
Thanks,
Gordon -
Error- Update Bdoc status failed- R3AD_Accounting
Hi ,
We are trying to replicate service order from CRM to r/3, after saving a service order in SMW01 it shows error "No r/3 upload"
In SMQ2 there is a queue R3AD_Accounting with status SYSFAIL stuck with the error message "Update BDoc status failed - BDoc not found"
In R3AC1 the object Accounting does not have any entries for tables or initial flow context.
Please let me know where we can maintain the entries for this Adapter object-Accounting.
Regards
PrathibaTry releasing the queue, might be a temporary problem.
If not, check out the lockings in transactions sm13 (or sm12: I'm not sure).
Michael. -
AddOn Installation Failed On Terminal Server
Hello All,
I have created a addon in SAP B1 2007 B and when i am trying to installed the addon on the Windows 2008 Terminal Server
so that the client can log on to the AddOn through terminal server .But the addon is not getting installed and throwing an
error " AddOn Installation Failed " and "Failed to Initialised the AddOn".
Thanks & Regards
AmitAmit,
Are you logged on as Administrator on the Terminal Server and are you installing the add-on? Windows Server 2008 is supported as of 2007B PL09. Are you at least at this PL level?
Eddy -
Percent Complete: 100; Status: Failed
Hello,
I just upgraded machines and so had to reinstall my Pro apps including Compressor 3.0.3. Now when I use Motion 3.0.2 -> File -> Export Using Compressor and then launch the Compressor jobs they each fail. When I look at the Status from the Batch Monitor it says, "Percent Complete 100; Status: Failed" and the corresponding log entry is:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<services></services>
The motion file was copied over for rendering properly but there is no resulting movie file. This is true across multiple shots. What might have caused this from a fresh install of Pro apps on the new iMac (10.5.2)?
Thanks.I've found that I can get a movie file with an uncompressed 10-bit option but not 8 bit also. Why would this be? (The initial compression that keeps failing is H.264.)
-
ITunes Diagnostic - IPOD status failed
My iTunes is no longer recognising my Ipod (60Gb photo), with the Diagnostic check showing that the Ipod Connection status failed. I have tried EVERY hint, tip, advise and rumour to get my Ipod working again, but it is still a $500 paper weight.
My Ipod is not recognised on iTunes.
My Ipod does show up on Windows as drive e:, but I can't access it. When I click on the Ipod icon, it comes up with an i/o error.
Any advise please before I thrown this thing into the bin.
Thanks,
Ipod 60GB Windows XP"Press and hold the Menu and Play/Pause button for about 10 seconds."
This is not how you force disk mode.
First, hold the MENU and SELECT (Center) buttons until you see the Apple logo to reset the iPod. Then, while the apple logo is displayed, hold the Play/Pause and SELECT buttons.
This should enter the iPod into disk mode.
I'm not sure where you're going with this Disk Mode recommendation, but I guess I would recommend trying to restore it from this stage.
Maybe you are looking for
-
My daughter downloaded the new safari update on her iMac and now it won't open without new os update
We downloaded the new safari update on my daughter's iMac and one it won't open without the new os. How do we go back to the previous safari? Thanks!
-
Console does not display when X exits (Formerly X hard locks on exit)
Interesting problem, I think: Going from the X server to the console, I only get a black screen, and my monitor seems to think nothing is there - it seems like X won't give up control of the screen. Now, I've narrowed this down to a problem with the
-
Side-chain filter does what exactly?
I'm sure this must be covered somewhere, but I can't find specifics in the manual or previous posts here. Which signal does the side-chain filter in LP8's compressor affect--the side chain signal (i.e., compression only occurs when certain frequencie
-
Proxy setting for Internet Explorer
Recently purchased new CPU with Windows 8.1. I am not able to access Explorer. I get an error message about proxy settings. How do I change this?
-
New/Modified login items not saving
Within the System Preferences > Users & Groups > Login Items (for Admin user).... I am trying to add an application to open upon login. However when I add it (both with the Lock unlocked or locked)... and then reboot it doesn't save. I set the new lo