Address Area

I would like to fill an address area with the same information that has already been entered as "sold to" when the "Yes" button is selected for "is the ship to the same as the sold to"?

You will have to write some custom JavaScript for this to be done.
I would look at using a check box for selecting this action.

Similar Messages

I can send email but not receive on my iphone 3GS. Emails to my .me address are OK but not emails to the address hosted by Network Solutions. NS have checked my settings twice. I am using IMAP. Is this a problem with iCloud?

I use IMAP email hosted by Network Solutions for my main email address. I can send and receive this OK in my Mac Mail on my MAC book and also on webmail. However my iphone doesn't receive these emails but it can send. I have checked settings on my iphone twice with Network Solutions but no luck. Emails addressed to my .me address are received OK. I have a suspicion this problem started when I signed up to icloud.
my ISP is BTconnect
Any ideas?

Useful suggestions. In fact I had already deleted and re-entered the account details a few days ago without apparent success. The error message was along the lines of "cannot access the server".
Anyway about an hour after your message, my emails started coming through after a 6 month gap! - makes me think someone at Network Solutions monitors these discussions.
Many thanks

My folders in my email accounts are not on my phone? Only with one email address are they.

My folders in my email accounts are not on my phone? Only with one email address are they. Any reason why?

Care to share which OS, email client & versions you are using?
iOS is for mobile devices.

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

IP addresses are going to be changed for SharePoint farm servers(App, WFE, DB)

Hello,
We had multiple SharePoint Farms, and we would like to changes the IP address of all the servers in farm(because of changing the Datacenter). will I get any issues, if, how can I take it forward. Need suggestions.
Thank You
NARLA

As Vivek says it won't break anything, as long as you fix DNS.
SharePoint checks the database server by server name or alias, which both use the computer name, so no IP addresses are directly used there.
So these should be the steps:
1. Change your DNS records to point to the new IP address for all Web Applications
2. Change the IP addresses for the SQL Server and SharePoint
3. Check IIS on your SharePoint Server(s) to see if the new IP address is correctly configured for all Web Applications on all the servers in your farm.
4. Test everything :)
Happy SharePointing!
Nico Martens
SharePoint/Office365/Azure Consultant

I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent.

I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent. When sending an email, Mail apparently works for a while but does'nt sent anything. I repeated sending the mail with the same result and 2 or more mails in the draft folder. Yesterday I discovered that the mail had been sent 4 times!. Now I have the same problem: the mail has not been sent, it appears in the draft folder, I try to delete it but the mail remains in the draft folder. This happens after updating to Mac OS X 10.7.2 and migrating to iCloud.
I have MacBook 2 Ghz Intel Core 2 Duo, 4 Mb ram memory, Mac OS X Lion (10.7.2).

If those music are greyed out in iTunes on your laptop, are you able to play the music? If you cannot, it means that you probably deleted the mp3 file or moved it to another location where iTunes can no longer find. If they are greyed out on iTunes and cannot play them, I would just right click and delete it. Then re-sync with your iPad.

I downloaded Lion and now 3 of my mail addresses are offline and I cannot access or send messages. Any ideas?

I downloaded Lion and now 3 of my mail addresses are offline and I cannot access or send messages. Any ideas?

If it's because you were using Office 2004, the eight year old version of Office that was written when Intel processors were not used in Macs, then there will be no fix. Lion dropped support for PowerPC applications, as has been widely reported since Lion's release last August.
You can upgrade Office 2004 to Office 2008 or Office 2011. You can use iWorks 2009 that can open Microsoft files. You can use a number of free applications that are also capable of working with Microsoft documents. You can go back to Snow Leopard, if you have a backup. Or, if you have an external drive or room to add a partition to your current drive, you can install Snow Leopard on it.
Search these forums for more information. If this is your issue, it's been posted and answered several times a day since August 2011.

I get "there are non ASCII characters in the local part of the recipient's address" when trying to send emails as BCC. email addresses are all good!

I used to send out christmas greetings from my biz to groups of 20 customers, in BCC format. all addresses are good, but the emails don't get sent now because of the supposed ASCII problem.

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Today the website addressed in my browser window changed so that the site's home addresses are in black and the rest of the address are in grey. How do I change it back?

Today the website addressed in my browser window changed so that the site's home addresses are in black and the rest of the address are in grey. How do I change it back?

Just go to iCloud on your iPad. Click on delete account - this will delete the account on your iPad only. You will be given to keep the addresses and calendar or delete the data.
Then you create your new account on you iPad by entering your apple id.

Table name which contains the email addresses maintained in address area of SCOT

HI,
I would like to know the table name which contains the email addresses maintained in address area of SCOT.
I know how to see through SCOT, but I want to see as a list through SAP table.
I am not able to see email list through SXNODE AND SXADDRTYPE tables.
Thanks,
Nagaraju Ravuri

Hi Nagaraju,
You may use ADR6 table and field SMTP to get email address of respective users.
Regards,
Deepak Kori

Manually provided DNS server addresses are higher priority than DHCP's

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
With the recent revelation of DNS server security issues, many have expressed a desire to use DNS servers they know to be secure rather than the servers specified by their routers via DHCP, which often are those of a particular ISP.
When you manually enter a DNS server address in Mac OS X Leopard's Network preference pane, the manually entered address(es) appear below any DHCP-provided addresses (which are shown in grey as they are unchangeable), leading one to assume that DHCP-provided addresses always have priority over any a user may specify.
However, a check of the /etc/resolv.conf file generated by Mac OS X shows that in fact user-provided DNS addresses will supercede any provided by DHCP.
As an example, if your router promotes itself as a DHCP server, its IP address, say "192.168.0.253," will appear, greyed out, in the Network->Advanced->DNS preferences pane.
If you then add, say, OpenDNS' addresses of "208.67.222.222" and "208.67.220.220," the preferences window will show:
192.168.0.253 (greyed out)
208.67.222.222
208.67.220.220
But the generated /etc/resolv.conf will show the order Mac OS X will actually reference the servers is:
nameserver 208.67.222.222
nameserver 208.67.220.220
nameserver 192.168.0.253
While this is non-intuitive, given how the addresses are displayed in the preference pane, it is exactly the way a user would hope things would work - allowing one to specify DNS servers to be used in lieu of any a router provides, especially handy if the router propagates the address of a DNS server that is having issues, that is untrusted or is simply overloaded or offline.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

That's very good to KNOW.
I figured it as such as I have some manual entries for the office and I don't use profiles, so it stays there when I go home.
I notice a slow-down when office DNS entries are used at home -as one would suspect.
I do like KNOWING that it's the case though - thanks for the info!
Scott

I am trying to subscribe so that I can convert PDF to word. Get so far but only options for address are in USA, I live in England

I am trying to subscribe so that I can convert PDF to word. Get so far but only options for address are in USA, I live in England

Hi golfgerald,
I'm sorry that you're having trouble subscribing. Please take a look in the lower-left corner of the Adobe.com website. Do you see "United Kingdom" listed as the region? If not, please click Change Region, and then choose United Kingdom.
Did that do the trick?
Best,
Sara

SMTP Address area *

I am using NW 46C, WEBAS 620 SP20 XI30
In SCOT system has 2 nodes under INT
IMAIL
SMTP
IMAIL we are using for xml messages and SAPconnect mail, which is working fine..., SMTP for CCMS alerts configuration purpose
The problem is when I Goto SMTP in Address area typed "" then in IMAIL will overwrite and there is no "" in IMAIL present
in other words, only one time I can put "*" either IMAIL or SMTP if SMTP configured IMAIL does't work ....
I am also sending screen shot for that please help me very Urgent
http://www.flickr.com/photos/25222280@N03/2485927205/sizes/o/
Your response really appriciated
Thanks in Advanced
and futher tell me please Am I doing right configuration for SMTP ?

Hi,
Sending Emails Using XI Mail Adapter
Tryied now..
http://www.riyaz.net/blog/index.php/2008/02/23/xipi-sending-emails-using-xi-mail-adapter/
In this article we shall discuss the configuration of SAP XI Mail Adapter on the receiver side. The receiver mail adapter resides on the J2EE stack and converts the XI messages into emails and transfers them to email server or in simple words sends them as emails to intended recipient(s).
The adapter supports SMTP as well as IMPA4 protocol. Message protocol provides two options, namely XIALL and XIPAYLOAD. In the former entire SOAP message is sent as an attachment in mail along with the payload while in the latter only the message payload is sent.
Configuring the Receiver Mail Adapter
Lets say you want to send incoming XML message as an email. The mail adapter provides two options one using the mail package and one without using mail package. When you do not use mail package you have to provide the email header details (like To and From addresses, Subject line etc) in the adapter itself. There is no restriction on the XML message format or namespace. However, when you use mail package, you have to adhere to a specific format of the source XML.
The figure above on the left shows a typical message structure that should be used while configuring receiver mail adapter with mail package. The Message Type must be named as Mail and it must be present under the Namespace http://sap.com/xi/XI/Mail/30. Your message is bound to fail in adapter engine if this is not adhered to. This helps you to dynamically set email parameters like sender, receiver mail subject etc.
The URL of the mail server should be specified as shown below depending on whether you use SMTP or IMAP4.
smtp://EmailServer or imap://EmailServer/UserInbox
If your server required User Authentication, you can specify the same while configuring the adapter. If you want to request a delivery receipt, check the Send Delivery Status Notification checkbox. The delivery receipt is delivered to the email address specified in the To field. base64 content encoding is possible. The figure on the right shows a typical configuration of the receiver mail adapter.
As with any other J2EE adapter, you can enhance the adapter further using the adapter modules which can be specified in the module tab of the communication channel.
Thanks,
Satya Kumar

How to remove address area in the New window opened using getURL()?

Hello everyone,
I am trying to open a NEW window from Flash and I am using
the following code to do so.
getURL("javascript:window.open('
http://www.MyDomain.com/demo/','Demo',
'width='+((screen.width*3)/4)+', height=' + ((screen.height*3)/4) +
', top=' + ((screen.height*1)/16) + ',
left='+((screen.width*1)/16)+' , fullscreen, toolbar=no,
scrollbars=yes, resizable=yes, menubar=no, status=no,
directories=no, location=no'), void(0)");
This line of code opens a NEW window but I still have web
address area available in the new window. Can someone be kind
enough to tell me how I can remove the web address area on the top
of the window?
Thank you very much and have a great day.

Thanks for answering Frank, goLink may be linked to a method of backbean?
That what we need is to generate jobId through a method and immediately after deployment of the report on another page.
Already tried to goLink component but unfortunately does not have the property to execute a method Action.

HT5621 I am English & live in France. My account details & Billing Address are both registered in France. I wish to purchase books in English but when I log in to iTunes to make such a purchase I am automatically diverted to the French web site

I am english & live in France. My account & Billing Address are both registered in France. I wish to purchase Books in English. However whenever I access the UK iTunes website to make a purchase I am automatically diverted to the French web site. The selection of books in English on that site is very limited. Can I set up a separate account to make purchases of English books in addition to my existing account?

You can only buy content from your own country's iTunes store - to be able to buy from, for example, the UK store you will need to be here in the UK and have a UK billing address on your account.
If there are particular ibooks that you would like to be able to buy then you can try requesting that they be added to the French store, but unless the publisher's agree to it then Apple won't be able to sell them there : http://www.apple.com/feedback/itunes.html
Do you have access to other ebook apps/stores in the French store e.g. Kindle app for Amazon, Nook, Kobo - you might be able to get English-language versions of ebooks from them.

Domicile and billing address are Thailand. I want to buy a book in Ibooks Switzerland. However this does not work. Because my Apple ID applies to Ibooks Thai only.

Domicile and billing address are Thailand. I want to buy a book in Ibooks Switzerland. However this does not work. Because my Apple ID applies to Ibooks Thai only.

The best fix for your problem is to try getting your books from some other store which also has a free ereader app, such as Kindle, Nook, Kobo, GoogleBooks, Sony.

Address Area

Similar Messages

Maybe you are looking for