Address Book - Adding a field to address

Bento has highlighted a particular need to add extra field/s in Address Book. Many UK addresses need town/District to be added and as separate fields for sorting. e.g.
Wharf Road, Gnosall, Stafford, Staffs. is a common configuration. Joining Gnosall with Stafford may be acceptable for an address label but quite the opposite for sorting i.e. All Gnosall or All Stafford.
Why are UK left with such an inadequate arrangement by Bento and Address Book? The products are otherwise superb in the way they work with each other.
Is someone at Apple looking at this?

You can give Apple OS X Feedback.
I don't think Bento is an Apple product.
AK

Similar Messages

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
               p.full_name_lfmi name,
                p.BIRTH_DATE, p.GENDER Sex,
                Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
                a.academic_period TERM,
                CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
                             ELSE ' '
                END AS Program,
                a.COLLEGE, a.degree, a.major, ' ' rule,
                a.STUDENT_POPULATION,a.STUDENT_LEVEL,    a.application_status Status, a.application_status_date app_sts_dte,
                ad.decision_date1 Last_Dec_Date,
                ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
                /* Deposit Date uses the last term entered in :p_term parameter string */
                (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid)   AS "DEPOSIT DATE",
                ph.phone as PHONE,
                CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
                 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
                            ELSE ' '
                            END
                END AS FIRST_CONTACT,
                DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
                goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
           MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
           MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
        AND a.curriculum_priority = 1
        AND a.person_uid = ps.person_uid
       AND a.person_uid = ad.person_Uid(+)
       AND a.person_uid = goremal_pidm(+)
       AND a.person_uid = adr.pidm(+)
       AND a.person_uid = ph.pidm(+)
       AND ph.rnum(+) = 1
       AND a.person_uid = c.person_uid(+)
       AND a.academic_period = c.academic_period(+)
&Where_Clause
       /*    TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
        AND NOT(p.id_number = '00000000'   OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
       AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
       AND a.academic_period = ad.academic_period(+)
        AND a.application_number = ad.application_number(+)
        AND a.degree <> 'ND'    /*   AND a.college <> 'LW'                         -- Does not need non-degree and law students    */
       &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

Adding form fields breaks tag structure

I have been teaching workshops at my university on creating accessible PDF forms from MS Word. I am very familiar with PDF accessibility. For the most part, the process of field recognition, marking up tables, writing tooltips, manipulating the tag tree, etc., all goes smoothly. I have noticed something that is creating a lot more work for our people, however.
After adding forms to the tagged PDF using recognition and the Tools > Forms > Add New Field tool, we adjust the field tab order and add tooltips. Once all of that is in place and we are ready to fine tune, we click the Tools > Accessibility > Add Form Fields to Tags button. Adding Form Fields to Tags does not work consistently if you edit the tag structure manually while in the Forms creation process. You can do some tag remediation prior to entering the Forms tool, but if you edit the tag structure while in Forms, the Adding Form Fields to Tags often does nothing -- this is certainly a bug in Acrobat X but it is not hard to work around.
The larger problem is that after we click Add Form Fields to Tags button, the tag structure reveals itself to be very much distorted and extreme amounts of tag structure remediation is required. Here are three screen shots that illustrate the point.
This first image shows the on-screen appearance.
Below is the expanded tags tree, prior to adding fields to the tag structure:
The tag structure is clean and elegant. If I were to publish this, no remediation would be necessary.
And here is the tag structure after adding form fields:
What has happened is Acrobat has grabbed recognized form fields and other elements in the document and has jammed them into the tag structure. Other things are affected as well. For example, headings in the page have extra, redundant textruns in them.
This has radically negatively affected the tag structure, requiring the author to do lots of remediation.
Any recommendations? solutions? similar experiences?
It seems obvious to me that this is a flaw in Acrobat that needs to be addressed, if accessibility is a goal. Or perhaps I'm doing something wrong??

Hi Daver1111,
Nope. No answer and nothing from Adobe.
I know something is going really really wrong, too: We have a product called CommonLook. It's an enterprise-level PDF accessibility remediation tool. It works well in fixing most structural problems in PDF through a relatively easy to use interface--you just drag textruns and elements around. It also has some tools that automate cleanup for accessibility.
I have no problem using this tool 99% of the time, but when I use it on forms I have made in Acrobat, the CommonLook plugin hangs when I try to save the PDF. It identifies a "structural error" in the PDF and crashes, leaving the PDF unchanged.
You can change the PDF in Acrobat by spending time moving around and creating new elements and deleting extra textruns and such, but, wow, what a royal pain in the *** that is!
Since no one is from Adobe is responding, I'm going to file a bug report.
Cheers,
ken

Form Validation using Javascript error when adding extra fields

Hi,
I have a form (with a few fields which require validation) which works just fine. I have added extra fields to the form and require them to validate too. My problem is that they are not showing via the behaviours/validation box and I can't figure out how to sort it! They are contained within the form element. I have tried to delate the original validation and start again but to no avail.
Please can someone help me?
Code below.
Many thanks
function MM_validateForm() { //v4.0
var i,p,q,nm,test,num,min,max,errors='',args=MM_validateForm.arguments;
for (i=0; i<(args.length-2); i+=3) { test=args[i+2]; val=MM_findObj(args[i]);
    if (val) { nm=val.name; if ((val=val.value)!="") {
      if (test.indexOf('isEmail')!=-1) { p=val.indexOf('@');
        if (p<1 || p==(val.length-1)) errors+='- '+nm+' must contain an e-mail address.\n';
      } else if (test!='R') { num = parseFloat(val);
        if (isNaN(val)) errors+='- '+nm+' must contain a number.\n';
        if (test.indexOf('inRange') != -1) { p=test.indexOf(':');
          min=test.substring(8,p); max=test.substring(p+1);
          if (num<min || max<num) errors+='- '+nm+' must contain a number between '+min+' and '+max+'.\n';
    } } } else if (test.charAt(0) == 'R') errors += '- '+nm+' is required.\n'; }
} if (errors) alert('The following error(s) occurred:\n'+errors);
document.MM_returnValue = (errors == '');
//-->
<form action="contact_us.asp" method="post" name="contact" target="_parent" class="contentText" id="contact">
      <table width="100%" border="0" cellspacing="5" cellpadding="0">
        <tr>
          <td width="54%" class="subHeader">Full Name* </td>
          <td width="46%" class="subHeader"><input name="FullName" type="text" id="FullName" /></td>
        </tr>
        <tr>
          <td class="subHeader">Company Name </td>
          <td class="subHeader"><input name="CompanyName" type="text" id="CompanyName" /></td>
        </tr>
        <tr>
          <td class="subHeader">Address</td>
          <td class="subHeader"><input name="Address1" type="text" id="Address1" /></td>
        </tr>
        <tr>
          <td class="subHeader"> </td>
          <td class="subHeader"><input name="Address2" type="text" id="Address2" /></td>
        </tr>
        <tr>
          <td class="subHeader"> </td>
          <td class="subHeader"><input name="Address3" type="text" id="Address3" /></td>
        </tr>
        <tr>
          <td class="subHeader">Postcode</td>
          <td class="subHeader"><input name="Postcode" type="text" id="Postcode" /></td>
        </tr>
        <tr>
          <td class="subHeader">Telephone Number* </td>
          <td class="subHeader"><input name="Telephone" type="text" id="Telephone" /></td>
        </tr>
        <tr>
          <td class="subHeader">Mobile Number </td>
          <td class="subHeader"><input name="Mobile" type="text" id="Mobile" /></td>
        </tr>
        <tr>
          <td height="25" class="subHeader">Email Address* </td>
          <td class="subHeader"><input name="Email" type="text" id="Email" /></td>
        </tr>
        <tr>
          <td height="30" class="subHeader">Status*</td>
          <td class="subHeader"><select name="StatusClass" id="StatusClass">
            <option selected="selected">Please Choose</option>
            <option>Architect</option>
            <option>Interior Designer</option>
            <option>Private Client</option>
            <option>Student</option>
            <option>Trade Enquiry</option>
          </select>          </td>
        </tr>
        <tr>
          <td height="23" class="subHeader">Project*</td>
          <td class="subHeader"><select name="Project" size="1" id="Project">
            <option selected="selected">Please Choose</option>
            <option>Planning Stages</option>
            <option>New Build</option>
            <option>Refurbishment</option>
            <option>Barn Conversion</option>
            <option>No project - information only</option>
          </select>          </td>
        </tr>
        <tr>
          <td height="37" class="subHeader">How did you hear about us?*</td>
          <td class="subHeader"><select name="CameFrom" size="1" id="CameFrom">
            <option selected="selected">Please Choose</option>
            <option>Web Search</option>
            <option>Grand Designs</option>
            <option>Living Etc</option>
            <option>Home Building & Renovation</option>
            <option>Architect</option>
            <option>Friend/Family</option>
            <option>Magazine/Editorial</option>
            <option>Newspaper Article</option>
            <option>Trade Show/Exhibition</option>
            <option>Other</option>
          </select></td>
        </tr>
        <tr>
          <td height="24" class="subHeader">Brochure Request </td>
          <td class="subHeader"><input name="Brochure" type="checkbox" id="Brochure" value="checkbox" /></td>
        </tr>
        <tr>
          <td class="subHeader">Message</td>
          <td class="subHeader"><span class="style4">
            <textarea name="Message" id="Message"></textarea>
          </span></td>
        </tr>
        <tr>
          <td class="subHeader"> </td>
          <td class="subHeader"><input name="Submit" type="submit" value="Submit" /></td>
        </tr>
        <tr>
          <td colspan="2" class="subHeader"><em>* Required fields</em></td>
        </tr>
      </table>
      </form>

whoops..... forgot to post this line of code which was a bit further down the page...
"MM_validateForm('name','','R','number','','RisNum');return document.MM_returnValue">

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Adding new field to data source -can not see them

Experts,
I have added 4 fields to the data source 0FI_AA_11 .
I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
Please advice me how can i see them in RSA6.

Hi Manoj,
Have a look, similar post:
Re: not able to see new fields in datasource
Hope it Helps
Srini

Added new field to ALV but not displaying the ouput

Hi guys,
I'm adding one more column to be displayed on an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE eina-matnr,
extwg LIKE mara-extw,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
maktx LIKE makt-maktx,
lifnr LIKE eina-lifnr,
wglif LIKE eina-wglif,
<span style="color:red">idnlf like eina-idnlf,          " <----
new field</span>
name1 LIKE lfa1-name1,
profl LIKE mara-profl,
END OF itab.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = sy-cprog
      i_internal_tabname     = 'ITAB'
      i_client_never_display = ''
      i_inclname             = sy-cprog
     i_bypassing_buffer     = 'X'
    CHANGING
      ct_fieldcat            = t_cat
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
I've added in a new field inside the ITAB internal table, but it wouldn't appear in the t_cat, only all the old fields will appear. What have i done wrong?

Hi
Facing similar kind of issue.. added one field to the existing internal table. This is not getting populted by the field catalog merge FM. Tried with the suggested solution also of running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in..
But the newly added field is not getting populated. Any suggestions would be of great help.
Regards,
sridevi S

Adding new field to Remote Cube

Hello,
We have an existing remote cube that we are trying to add a new field to in 7.0. I've already added the field to the datasource, unhidden it, and tested it in RSA3. Now i'm trying to bring it into BW and add it to the remote cube. I right clicked on the source system under the data target and chose Replicate Metadata however the new field does not show up anywhere. What am i doing wrong? Does a remote cube work differently? How do i get my new field over from R3?
Regards,
TMS

That's the problem. The R3 field does not show up in the datasource in BW so it can be moved over to the transfer structure. As you know when you replicate metadata, the new datasource fields appear and can be mapped into the transfer structure. That is not the case for this remote cube. The new field is not there.

Adding new field to Customer master sales data area sales tab

Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.

Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps.

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

SRM 7.0 -Adding Custom fields in Contract Item screen at particular positn

Hi,
We have a requirement to add new custom fields in the Contract Item screen at required position, in Left and right side container.
We have tried the following methods but have not been able to achieve the same. Kindly help!
1) Added new field in Context through enhancemnt in the Details screen View of Contract , Binded the field to the field in structure INCL_EEW_PD_ITEM_CSF_CTR and add the field to teh Layout - Using this method, The field is not saved to the table.
2) Added the field to meta data table /SAPSRM/V_MDF_IC - This is positionng the field on teh right container at the bottom. We want to position it on left side.
Kindly help to understand where we are going wrong.
Thanks in advance,
Regards
Prasuna.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Adding Summary Fields

Good Morning Everyone,
We would like to add summary Fields.
1)
Double click on the Data Model icon on the Object Navigator
Click on the Summary Column tool on the Data Model Editor's left hand toolbar
Double Click on CS_1
and so on
2)use SUM at Report Wizard :
After researches, we founded Creating summary / formula columns in data model does not show them in paper layout. We learnt the report wizard, and choose to display the summary / formula column in one of the steps.
Following Report Wizard and will see SUM option;
http://nycapex.webs.com/apps/photos/photo?photoid=95360469
We have hard time in both ways.
If you have experience in Adding Summary Fields, please share with us.
Thank in advance,
NY
Edited by: New Yorker on Aug 17, 2010 7:44 AM

Your screen shot shows that you have nothing selected as a summary. So, there is nothing to display in the layout. What is your exact problem? The available fields don't look like you can SUM them, so the option is not available.
we founded Creating summary / formula columns in data model does not show them in paper layoutIf you add them later on, you can manually add them in the layout.
Edited by: InoL on Aug 18, 2010 1:53 PM

Error while adding user fields to user table using vb6.0

Hi,
I am adding a user tables using vb6.0 using DIAPI.
I am able to add the user table successfully.
I am getting the following error when i am adding the fields to the table.
"The metadata object for this object cannot be updated, since it's ref count is bigger than 0."
My code is as follows:
    oUserFieldsMD.TableName = TABLE_NAME_ITEM_LOCN
    oUserFieldsMD.Name = vTableFields(0, lCount)
    oUserFieldsMD.Description = vTableFields(1, lCount)
    oUserFieldsMD.Type = vTableFields(2, lCount)
    oUserFieldsMD.EditSize = CLng(vTableFields(3,lCount))
    lRetCode = oUserFieldsMD.Add
This error does not come up when i try to add the field to my table using the vb sample provided by SAP.
Your help will me much appreciated.
Thanks.

Hi Satish,
The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
e.g
Dim pUTables As SAPbobsCOM.UserTablesMD
'Do your stuff
Set pUTables = Nothing
Dim pUFields As SAPbobsCOM.UserFieldsMD
'Do your stuff
Set pUFields = Nothing

Adding a field to infotype 554 with PM01

I was adding this field to infotype 0554 via PM01 and while I was generating the objects I got this error.
Structure HCMT_BSP_PA_US_R0554 does not exist
Message no. PG361
Diagnosis
The structure HCMT_BSP_PA_US_R0554 does not exist in the Dictionary.
Procedure
Please create the structure before executing any further actions.
Any ideas how to solve this?
Thanks,

yes it is public sector.
I went to PE03 and found molga 10 assigned to US.
not sure how to check for PMI

Address Book - Adding a field to address

Similar Messages

Maybe you are looking for