Address Book Application is gone!

Yesterday I was working throughout the day uploading some film files to my iDisk. I got the spinning beachball twice and had to force a restart once. In the evening when I was about finished, I wanted to do something in Address Book. I noticed a big question mark covering the AB icon in the Dock. When I clicked on it it went PUFF! I have done a search, but I can't find the application anywhere. All the data seems to be there; I can get addresses through the widget or use them in Mail. I do see the following: AddressBook.pkg under MacBook HD>Library>Recipts>AddressBook.pkg. When I click on that it seems to want to load the program, but then it can't complete it.
What is the easiest way to re-install the AddressBook application?
Thanks for the help.

No Kätchen, that is just the receipt, not an installer. Leave receipts alone, you need them.
Now, AddressBook is a "custom install" on 10.4
-mj
[email protected]

Similar Messages

  • My Address Book application is GONE - question mark on it on taskbar

    Hi. I'm a relatively new Mac user. My Address Book app is gone completely from my Applications folder and it has a question mark on it when I click on the icon in the taskbar. All of my contacts appear to be intact in Mail - they show up when I type addresses in emails, and I can still see the photos I assigned to contacts when these contacts send me email. But the app itself is gone from the Applications folder and I can't seem to find it no matter where I search. I've searched for Address Book under every user profile on this machine.
    I should note that I have 4-year-old daughter who uses this mac on occasion and who seems to have a special gift for the sorts of mouse-clicks and command-typing that evaporate or otherwise misfile important applications.
    How do I reinstall just Address Book? It seems to be the only App missing. The Leopard disk seemed to be suggesting that a complete reinstall would be necessary which seems a bit much for just the one app.

    You can use a program called "Pacifist" to install individual applications from the Leopard DVD (Available here: http://www.charlessoft.com/)

  • Address Book Application Dissapeared!

    I dont know what happened but I just went to open my Address Book from my dock and I got the question mark so I went to the apps folder, no Address Book! I did a spotlight search, and it found the Address Book Widget which I ran, and it had my contacts in it and my mail is still pulling from there, but what the **** happened to the Address Book Application?? I had this happen once before with the Preview program, just up and dissapeared on me.
    I do not sync to mac mail, and nothing out of the ordinary. Was there yesterday, gone today. Any thoughts?

    Well, applications don’t just disappear by themselves. If they keep disappearing from /Applications/ in your case, it has to be because someone removes them from there...
    Anyway, you may reinstall Address Book as described in the second part of the following article:
    Custom installs in Mac OS X 10.4
    Note that Address Book may appear grayed out in the installer, but will be checked if you check Applications there, and will be installed if Address Book has been removed from the /Applications/ folder.
    If the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Address Book back in sync with the rest of the system:
    About the Mac OS X 10.4.8 Combo Update
    Mac OS X 10.4.8 Combo Update for PPC
    Mac OS X 10.4.8 Combo Update for Intel
    You may also want to read the following articles for guidelines on how to properly install system updates:
    Troubleshooting installation and software updates
    Installing software updates
    Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

  • POP3 Mail & Address Book contacts have gone!

    I recently did some housekeeping on my Mum's iBook G4 (OSX 10.4.10), part of which was purchasing and installing SpamSieve into Mail. This all went fine. Today she said all the mail in her POP3 inbox had gone, she couldn't send/receive and all her address book contacts had gone (Except hers and Apples).
    I've got the iBook now and have noticed that her account type in Mail has somehow changed to a .Mac account (did I somehow do this, or did she???). This is obviously the root of the problem as the
    email address now has '@mac.com' appended to the end and the incoming mail server is now 'mail.mac.com' and the outgoing is 'smtp.mac.com:heremailaddress' which is all wrong. I'm unable to change the account type back to POP or the incoming mail server from 'mail.mac.com' (it's greyed out) back to what it was.
    I have now created a second account with the correct POP settings and have received in all unread email, but the read email messages have gone. I am unable to send as the new correct pop account is only offered the incorrect outgoing server ('smtp.mac.com:heremailaddress').
    Having read several post on this forum, I feel the Mail/Address Book issues are connected and that maybe the application(s) database(s) have been corrupted. I've tried the Address Book remedy at http://discussions.apple.com/thread.jspa?messageID=5248351&#5248351 but this does nothing. The 'user'>Library>Mail folder shows the two accounts as two separate folders. The recently recreated account folder has the new unread messages in the 'INBOX.mbox folder, but the older account folder (which now has 'MAC-' added to the front of its name) only has 'info.plist' in a 'INBOX.imapmbox' folder!
    I don't believe any back-ups are available. Can anyone help me restore her old unread mail, and possibly her address book contacts?
    I've also just noticed that SpamSieve does not launch as it should when I launch Mail, even though It was purchased and the scripts installed correctly.

    Didn’t you make a backup prior to the housekeeping?
    I don’t know why would Spotlight find contacts that are gone from Address Book (if that’s what you mean), but as far as Mail goes, under some circumstances (e.g. lack of available disk space, filesystem corruption, repeated crashes), Mail may discard the current ~/Library/Preferences/com.apple.mail.plist preferences file and create a new one. This file is where all the account settings are stored. As a result, all the non-.Mac account settings (but not the messages themselves) are lost. If you had a .Mac account, its settings would appear to have been preserved because Mail would set up that account automatically using the System Preferences > .Mac settings.
    What’s the capacity and space available on the startup disk? Take a look at the comments about disk space in the following article, in case they apply to you:
    Problems from insufficient RAM and free hard disk space
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what’s it all about?
    After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), quit Mail if it’s running, and make a backup copy of the ~/Library/Mail folder, e.g. by dragging it to the Desktop while holding the Option (Alt) key down, just in case something else goes wrong while trying to solve the problem. This is where all your mail is stored.
    You have three options now:
    (1) Restore ~/Library/Preferences/com.apple.mail.plist from a backup if you have one. Mail shouldn’t be running while you do this.
    (2) Set up your mail accounts again (you may want to quit Mail and trash the new com.apple.mail.plist first to start over). If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done. You’ll also have to re-configure most of your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
    (3) Mail may have renamed the old preferences file to com.apple.mail.plist.saved. If that’s the case, you may try trashing the new com.apple.mail.plist and renaming the old com.apple.mail.plist.saved back to com.apple.mail.plist. Again, be sure Mail isn’t running while doing this. Given the circumstances, there exists the possibility that com.apple.mail.plist.saved became corrupt, but that often is not the case and the settings can usually be restored by just renaming the file back to com.apple.mail.plist.
    As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

  • How can I export Outlook 2007 contacts to Leopard Address Book application?

    Hi,
    I just bought a MAC and I want to get rid of my PC, but first i want to export my CONTACTS from my Windows MS Outlook 2007 and import them in Leopard Address Book application.
    Any way I can do that ?
    Many thanks !

    I don't know if doing it with single vcards is the way you want to have it. This can be a quite big task when having many contacts.
    In Outlook You can export them as text file. You got to +File - Import and Export+. In the assistent you choose "Export to file". Then you choose "comma seperated (Windows)" In the next step you mark your Contacts folder. Then you choose where you want to save your output file. (I mountet my Documents folder on the mac and saved it there). Finish this assistent.
    Now on the mac you open AdressBook. +File - Import - text+ file and choose then your .csv file. Now in the AdressBook a import window opens where you can set all the fields matching to where Outlook stored the information. But basicly it should work without doing there something. Then you can import all Your Outlook contacts in one run.
    Hope this helps You!

  • MacBook Address Book Application Does Not Run

    MacBook OSX 10.5.8 - Address Book application will not run - it shows up in Applications Folder but will not run - either double click or command File - Open.  I have reinstalled the Address Book application with the original installation disk, which indicated the application was installed, still will not run.  Rebooted, reinstalled again - same result -- the Applications Folder shows the file size as 1.4 Mb - updated today - the installation disk showed approx. 53 Mb was being installed - not sure if the Application Directory is only showing a command file or what - also ran the hardware diagnostic and found no problems.  Software update shows current software is up to date.
    Haven't used Address Book so do not know if it ever worked.  Need it now to sync with IPhone 4.  Any Ideas?

    rjackjr,
    After reinstalling an Apple application from the installation disk, it is also necessary to reinstall the latest Combo Update for the installed system. In your case that would be Mac OS X 10.5.8 Combo Update.
    Try that and see what happens with your Address Book application.

  • I just purchased a new to me ibook g4 I have all the disks but the cd does not seem to read them properly. I wanted to re install everythMost everything works anyway except my address book application , help how do I reinstall

    I just purchased a new to me ibook g4. I have all the disks but they do not seem to work properly. When I restart holding the C key they just spit out of the drive. I wanted to reset everything back to factory and start over but no go. Most everything works anyway except my address book application. It seems to be missing. How can I download and reinstall a new address book App. Thanks, John

    iBook G4/1.33 12-Inch (Mid-2005 - Op)
    1.33 GHz PowerPC 7447a (G4)
    Intro Date:
    July 26, 2005
    Disc Date:
    May 16, 2006
    Order No:
    M9846LL/A
    Model No:
    A1133 (EMC N/A)
    Subfamily:
    iBook G4 - Mid-2005
    Model ID:
    PowerBook6,7
    Std. RAM:
    512 MB
    Std. VRAM:
    32 MB
    Std. HD:
    40 GB (4200 RPM)
    Std. Optical:
    8X "Combo Drive"
    Complete iBook G4/1.33 12-Inch (Mid-2005 - Op) Specs
    The problem with accessing the content of the disks is the CD Drive does not seem to access them. It also has a heck of a time ejecting them. Other disks seem to read. The unit came with imovie disks and I can use them. The disks look perfectly good no scratches but they just don't work, I was hoping I could just get a online copy of the address book to replace the one that seems to be missing. Or find it somewhere on my drive. Have no clue where to look though. 

  • I've lost my address book application. How do I get it back?

    My address book application has disappeared. Can I download it somewhere?

    Insert your installer DVD, open the Optional Installs folder, double-click on the Optional Installs package.  You can select Address Book for installation.  You will have to re-run the 10.5.8 Combo Updater if the version of OS X on the installer DVD is not 10.5.8.

  • My address book icon is gone from the screen on my black...

    my address book icon is gone from the screen on my blackberry pearl..please help me recover. Thanks

    Make selective backup
    save only data that you need to be saved.
    After that on the device go to Options - Security Options - General Settings
    Hit the menu button and select "Wipe handheld"
    It will wipe the device memory.
    After that restore the saved information to the device.

  • Importing Netscape's address book into Apple's Address Book application

    I want to import my email Netscape email address book into Apple's Address Book application. So I open the Address Book application and select import from the pull down menu. That brings up three choices, vCards, LDIF and Text. I previously had saved my Netscape address book as a pdf file. So I selected, Text. A window appeared from which I was to select where I wanted to get the file from. I made selections until I got to where my pdf file was and selected it. But I got the following error message.
    The file you selected does not appear to be a valid comma separated values (csv) file nor a valid tab delimited file, please choose another file.
    So I tried again and this time I selected LDIF, but when the file in my Netscape Users Profile that would appear to be my address book came up, it was “greyed out” and I could not select it. The file had the name “abook.mab”. It is not an LDIF file. There are no LDIF files in my profile.
    So I tried selecting vCards, but I got the exact same results as above. The file that looks like it is my address book, is grayed out and cannot be selected.
    So I went into Netscape to see if I could export my address book into Apple’s Address Book. I chose export from the Netscape menu and a window opened asking me to select where I wanted to export the file to. But when I got to Apple’s Address Book application, it was greyed out and could not be selected. The same thing happened when I tried to select Apple’s Mail program.
    I have about three hundred email addresses in my Netscape address book. If these addresses have to be manually entered into Apple's Address Book, I will not make the switch to Apple's Mail program.

    Netscape's Address Book window does not have that option. The Export option is under the Tools menu, but does not give you any options in the Tools menu. Once you select Export, the Export Address Book window opens. This window does have a format option where you can select either LDIF, Comma Separated or Tab Delimited. But it doesn't matter which of those I select, Apple's Address Book and Mail applications are not available for selection.

  • How do I re-install my address book application?

    While trying to import my contacts from my Hotmail account, I melted my Address Book application and had to send it to the trash. How do I re-install it? Can I re-install it? Do I have to re-install the whole operating system? Please help, I'm trying to learn how to use my mac!!

    G'day.. and welcome to the forums.
    I cannot imagine any circumstance where importing data would require that you delete the Address Book application!
    Have you emptied your trash? If not, move it back to your Applications folder.
    If not, the simplest path (least technical) path could be an Archive and Install, preserving users.
    Otherwise (if you are confident), install [Pacifist|http://www.charlessoft.com> and grab your Leopard install DVD. You should then be able to locate the Address Book in one of the installation packages - and you will be able to install it directly.
    You will then need to download the combo update to your operating system level (e.g 10.5.4), and install any Address Book updates that apply to that as well.
    I hope this helps.

  • How do I download a new address book application?

    My son deleted Address Book and now he wants its back. A software restore did not put the address book back. How do I find a way to download a new copy of the application Address Book? (He also deleted Mail app but I transferred mine over to his computer but that did not work for address book. I am running Tiger and he panther) I will strangle my son soon. Help. He should not delete applications willy nilly..not to mention they are really useful. Help.
    Ella

    Hello Ella.
    If you are running Tiger and your son is running Panther, I'm not sure how the Tiger Mail.app version is working with Panther. If it is working, it probably won't be for long. Your son needs the Panther version of Mail and Address Book which are not available as a download.
    You need to use an application called Pacifist with the Panther install package which allows for installing individual applications from the Panther install discs without re-installing the entire OS.
    You can download Pacifist at the following link.
    http://www.versiontracker.com/dyn/moreinfo/macosx/12743
    If your son is currently running 10.3.9 and the Panther install package includes an earlier version, after re-installing the Panther Mail.app and Address Book using Pacifist, you need to download the 10.3.9 Combo Update and re-install 10.3.9 to get the re-installed Mail.app and Address Book applications to the current version as of 10.3.9.
    You can download the 10.3.9 Combo Update here.
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html

  • How to add Custom Address Book Application?

    I need add my custom address book application, so I has reading docs and wikis about convergence customization but no see clear how to.
    I take a dojo tutorial for change event from addres book buttons but may be are not the best practice.
    Somebody know information source for solve this please.
    Thanks.

    JCV_ wrote:
    I need add my custom address book application, so I has reading docs and wikis about convergence customization but no see clear how to.The "YahooABSPlugin" code in the c11n_sample directory may provides some guidance.
    If this still doesn't help then you could contact Sun to get help from Sun Professional Services. Writing a custom Convergence application is far from trivial.
    Regards,
    Shane.

  • How to re-install address book application

    I deleted "address book" application carelessly, how to re-install the program? please tell me.

    Hi,
    have a look at Pacifist http://www.charlessoft.com/
    It should do the trick.
    Regards
    Stefan

  • No link to the Address Book application from Address Book Widget?

    Before I could click the little red button, but with the new (10.4.4) widget, is there a way to launch the Address Book application?
    1.5 GHz PowerBook G4   Mac OS X (10.4.4)  

    I don't think there is a way to launch the Address Book app with the new 10.4.4 widget like we could before. I noticed that right away and went to the Mac OS X Feedback page to report it. If it bugs you as much as it bugs me you should report it too.
    Here's the link just to make it easy:
    http://www.apple.com/macosx/feedback/
    I like the new design ("front end") of the 10.4.4 Address Book widget, but I immediately missed the handy red button. I hope we see that feature reintroduced in the next update.

Maybe you are looking for

  • Error creating Crystal Report using Stored Proc Universe

    Hi, I have created a stored procedure Universe, using the new feature available in XI R3. This connects to an Oracle database, executing a PL/SQL procedure returning ref cursor. I have created a WebI report using this Universe, which works fine and f

  • Error while running clustersetup.exe

    Hi, Can somebody please help me on installing Oracle9i RAC. I have 2 nodes ( Dell poweredge 6300 with Windows 2003 Advance server ). I have already configured public and private ip. Also, i am able to ping private and public ips from both the nodes.

  • What do I need to use thies speakers

    I got a pair of speakers on the side of the road marked free. they are box'd and obviusly for home theature after taking the back off of one and looking at the speakers they googling them i came to the conculsion they are extreamly old each box has t

  • How to use external CSS for standard items ?

    Hi, I would like to use my external CSS style-sheet for the standard items I add to my portal page. I build an UI template with a CSS-link to my css style-sheet, and I used this UI template for my portal page. But it seems that items cannot use this

  • Why all pictures don't show up in the drop zones?

    If I import, for example, 4 pictures in a theme that has three drop zones, only one or two pictures will show up when the loop plays and not in the order I have arranged them in the drop zones. Is there a way to sequence through all 4 pictures in eac