Address book Error 331
I've added my old sim card addresses with no problem. After 2 days, whenever I press my trackball, my pearl locks up, and I can not move the trackball. The only think that works is to shut off the phone by pressing the red "end" key. Have looked all over for this code or issue in every support area, but to no avail. All help is appreciated.
Thanks
Dave
Welcome to the Frums!
See if this link helps you any
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11238&sliceId=2&docTy...
Nurse-Berry
Follow NurseBerry08 on Twitter
Similar Messages
-
"Your server is not configured properly or your search query has exceeded the limit. Please check server configuration." is shown when I click on the address book tab. Is this a known issue and patchable?
There is no error in the directory server log and UWC log.
All mail and calendar servers point to a directory server proxy which then talks to a single instance of directory server. The AM manager is also running on the directory server proxy host. Would this cause problem?
ThanksHi,
When I first clicked on the "Address Book" tab, it
still points to the directory proxy
ldap://proxy.domain.com:389/piPStoreOwner=user,o=domai
n,o=PiServerDb. I notice an error in the access log
of the directory proxy. It reads
<date time> - OPERATION - INFO - conn=18673 op=33
SEARCH RESPONSE err=12 msg="The Server is not
configured to pass through control
1.2.840.113556.1.4.473" nentries=0 etime=0Suggest you ask on the directory server forum. I don't personally deal with directory proxy to any large extent. What I can tell you is that the OID appears to relate to:
supportedControl: 1.2.840.113556.1.4.473 <--- LDAP Server Sort result control (Server side sorting)
I change the defaultserver.ldaphost in
/var/opt/SUNWuwc/WEB-INF/config/corp-dir/db_config.pro
perties and
/var/opt/SUNWuwc/WEB-INF/config/corp-dir/db_config.pro
perties to point to the directory server directly. I
restart the web server, the container for UWC after
that.
Everything seems to work fine except in the UWC log,
psRoot is still pointing to
ldap://proxy.domain.com:<proxy
port>/piPStoreOwner=<user>,o=<domain>,o=PiServerDb.
How can I correct this?Manually, you need to delete the users psRoot attribute using ldapmodify/commadmin or alike. The psRoot attribute will be recreated when you next connect to UWC and click on the addressbook tab. Remember that these settings are for the default values, if settings already exist they aren't over-written.
Regards,
Shane -
OWA 2010 address book error retrieving free/busy information
Hi All
I get the following error when viewing a contacts free/busy information in the OWA 2010 address book.
Outlook 2010 clients cannot view contacts free/busy information either. There's a "not connected" error on the client.
This issue started after a service pack or update was applied. Which one I don't know as it was done by another admin.
Has anyone seen this error before or does anyone know what this error is pointing to?
Many Thanks
Roger
Request
Url:
https://remote.mydomain.com:443/owa/ev.owa?oeh=1&ns=ReadADOrgPerson&ev=LID
User: Test User
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Test User7cc
SMTP Address: [email protected]
OWA version: 14.3.210.2
Mailbox server: SBS.mydomain.local
Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance of an object.
Call stack
System.Diagnostics.SharedPerformanceCounter.GetCategoryData()
System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
System.Diagnostics.PerformanceCounter.Initialize()
System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Microsoft.Exchange.InfoWorker.Common.Availability.Query`1.ExecuteWithPerformanceMeasurement()
Microsoft.Exchange.InfoWorker.Common.Availability.ThreadContext.<>c__DisplayClass6`1.b__5()
Microsoft.Exchange.InfoWorker.Common.Availability.ThreadContext.Set(String label, ThreadCounter threadCounter, ClientContext clientContext, RequestLogger requestLogger, ExecuteDelegate executeDelegate)
Microsoft.Exchange.InfoWorker.Common.Availability.ThreadContext.Set[T](String label, ThreadCounter threadCounter, ClientContext clientContext, RequestLogger requestLogger, ExecuteDelegate`1 executeDelegate)
Microsoft.Exchange.InfoWorker.Common.Availability.Query`1.Execute()
Microsoft.Exchange.Clients.Owa.Core.Utilities.ExecuteAvailabilityQuery(OwaContext owaContext, AvailabilityQuery query, Boolean expectFreeBusyResults, Boolean expectMergedFreeBusyResults, AvailabilityQueryResult& result)
Microsoft.Exchange.Clients.Owa.Premium.ReadADOrgPerson.GetFreeBusy(OwaContext owaContext, String recipientPrimarySmtpAddress, ExDateTime startDate, ExDateTime endDate, HttpContext httpContext, String& allDayFreeBusy, String& workingHoursFreeBusy, String&
oofMessage)
Microsoft.Exchange.Clients.Owa.Premium.ReadADOrgPersonEventHandler.RenderFreeBusyData(String smtpAddress, ExDateTime startDate, ExDateTime endDate, Boolean renderOof)
Microsoft.Exchange.Clients.Owa.Premium.ReadADOrgPersonEventHandler.LoadInitialData()Free/busy data and the offline address book are two separate services.
Free/busy uses Exchange Web Services (EWS). The offline address book uses a different web service connecting to the OAB virtual directory.
Are you using SBS? SBS does some things differently so I recommend that you post this in the SBS Forum:
http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
IR ADV-4025 Fax Address Book Error
Hello, my office has been experiencing a strange issue with the IR ADV-4025. When navigating the Print Preferences > Edit Address Book the following error is displayed:
"Could not operate the address book because an error occured."
We are using the latest ADV 4025 (FAX) drivers on all our Win7 x64 machines. Oddly, this problem seems to be spreading. Originally, it was only affecting 1 computer but now there are 4 having this issue.
Any suggestions?
Thanks.Hi ccjames!
Thanks for posting in the Canon Forum! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area. -
SquirrelMail LDAP address book error
Hello all - over the weekend I upgraded my OD Master/LDAP server and my Mail server (two separate boxes) to v10.5.5 of OS X server, and now my users are reporting that they can no longer use our LDAP-integrated address book in SquirrelMail... I tried it myself just now and get this:
"Error initializing LDAP server password.myserver.com: [ServerName] Protocol error"
I didn't change the search base I had been using before (dc=password,dc=myserver,dc=com) on either the LDAP server or the Mail server, so I don't know what has happened here... I re-ran and checked the SquirrelMail config (conf.pl) and even removed the previous LDAP server entry and re-added the server, and tried changing the 'use Javascript' search (with both HTML and Java) but am still getting the same error.
I don't see anything pop up in the logs on either machine when I try to run the address book feature in squirrel mail and get that error.
Can anyone help me troubleshoot this?
Thank you
BCWhee! I just figured this one out for us!
I had updated our SquirrelMail per the http://osx.topicdesk.com tutorial and couldn't get this to work.
What I finally was able to figure out was that I needed the right entries and not modify my slapd files on the directory master.
From terminal:
cd /usr/share/squirrelmail/config
./conf.pl
Pick option 6
Pick option 1
You type in "l" to list your entries, and you may want to delete what's there by putting in "- #" where # is the number of the entry from the list.
Press + to add a new entry
For Hostname: odmaster.stanwood.wednet.edu (replace with yours)
For Base DN: cn=Users,dc=odmaster,dc=stanwood,dc=wednet,dc=edu (replace the dc's with your info, keep Users, important part!!).
For Port: 389
The rest you can generally fill in except for when you get to protocol, that should be "3"
Hit "d" for done, "S" to save, "Q" to quit and then try out your settings!
Good luck!!
Oh and this did work for us even tho we are using SSL for TLS support for the clients on our directory master. It also only pulls up people with eMail addresses in the directory record, not all of our thousands of students who also happen to be in there. -
Personal Address Book Error !
hi
i have added the ip phone service personal address book,subcribered the service for the phone,and i can see the service from the phone when i press the services button.But when i search the entry in the PAB ,it shows the message "Error:-7ffbc5c2:User(none)was unable to be validated(14910)",what's wrong with it?
thanksHi
It sounds like you've subscribed the service but haven't either defined the correct parameters, or set the parameters for the user you are subscribing.
As you create the service in CCMAdmin, you need to defined userid, pin and prefix parameters as defined in this document:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800b2eba.shtml
Then each user has to either use ccmuser to set their password and userid when they subscribe, or you need to do it for them individually from ccmadmin.
Please rate helpful posts...
Aaron -
Hi,
We have Exchange 2013 running in our network, and are using Outlook 2013 on all PCs. We added some users several weeks ago, and they are not showing up in the Address Book. When we try to download the Address Book in Outlook, we receive the error 0x8004010F
: The operation failed. An object cannot be found.
Please let me know how I can start to troubleshoot this.
Regards,
ChrisHi
There is a multiple reason to receive an error 0x8004010f, it is just a generic MAPI error.
Let’s check all settings are configured the way it is supposed to be: -
1. Make sure the authentication setting is set up properly by using this command: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *Auth* -AutoSize
2. Check URL’S are configured properly: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *url* -AutoSize
3. Check the location of OAB: -
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
4. Now find out the location of the database on which the Arbitration mailbox resides: -
Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like “*OAB*”} | ft Name, Servername, Database
Get-MailboxDatabaseCopyStatus MGUxxx
5. It is also important to ensure all database has the OAB set up properly for this use CMDLET: -
Get-MailboxDatabase | Ft Name, *book*
6. If one or more database does not have OAB setup, then use CMDLET to set OAB for it: -
Get-Mailboxdatabase | Set-MailboxDatabase -OfflineAddressBook “Default Offline Address Book”
7. If the issue is affecting only one or specific set of users, then check they have an OAB specified on their account: -
Get-Mailbox abc.xyz | fl Name, OfflineAddressBook,Database
Please correct me if the information that I am having is wrong.
Reply awaited.
Thanks and regards
Ashish@S
Ashish@V -
Communication express address book error
Hi Shane,
My communication express display this error message when i search name > 1000 record.
"Your server is not configured properly or your search query has exceeded the limit, Please check server configuration"
Can i disable this settting or is there any parameter for me to turn ?
Cheer
UBDubd wrote:
My communication express display this error message when i search name > 1000 record.
"Your server is not configured properly or your search query has exceeded the limit, Please check server configuration"
Can i disable this settting or is there any parameter for me to turn ?This error could be due to a restriction at the Directory Server end or due to a restriction at the UWC/CE end.
Check the directory server access logs to see if there is an error returned for the search.
Also confirm that the lookthru_limit setting in <uwc_deploy_base>/WEB-INF/config/corp-dir/db_config.properties is more then 1000.
Regards,
Shane. -
Address book Sync with Lion Server
Hello,
I have set up a Mac Mini with Lion Server and have OD users (no local user on the server). When I login "locally" (using the OD user account), I have my full environment, everything seems to work ok. Also the sync from my iPhone seems to work (only some calendar errors, sync doesn't come up with address book errors). But, as I now have noted, there is not really a sync of the address book. I have an old version of my address book on the server.
How do I properly set up that:
- my iPhone syncs with my OD user's address book only
whereas
- central address book is kept on the OD server as well (without any sync)?
Or did I get something wrong regarding the concept of running an address book on the Lion server ... maybe it's not possible to sync the iPhone to an OD user's address book?
Best regards,
Olaf.Have you tried rebuilding the accounts in SystemPrefs>Mail, Contacts and Calendars?
Are the machines bound to the directory?
Try setting it up in a fresh account on the broken Mac.
Try setting it up on a different Mac.
Hope this helps,
Brian -
How do I reinstall Address Book
I want to reinstall the Address Book app. I am having major problems with it. Went through all discussions and could not find solutions.
Address Book is empty.
I cannot import any archived file.
I cannot connect to iCloud. It won't add the account
I cannot create a new entry. File > New card does nothing
Here is what I tried :
Reboot
Check and repair permissions
Reinstalled Lion
No change.
But when I start whith another account, it works...
I do not see any other solution than reinstalling. But is it possible? How do I do it?Here it is. What appears in Console when I open Address Book. And I try to add a new entry. And I try to add an account. I did not delete anything. I Hope it is not too long...
12-07-25 10:37:20,400 Address Book: -[ABAddressBook sharedAddressBook] Can't ABACQUIRE_FILE_LOCK /SourceCache/AddressBook/AddressBook-1090/Framework/AddressBook/ABAddressBook.m :4048
12-07-25 10:37:31,010 Address Book: Error creating source folder ~/Library/Application Support/AddressBook: Error Domain=NSCocoaErrorDomain Code=4 "Le fichier « AddressBook » n’existe pas." UserInfo=0x7f86c50b52a0 {NSFilePath=/Users/yvestasse/Library/Application Support/AddressBook, NSUnderlyingError=0x7f86c50e9f60 "L’opération n’a pas pu s’achever. No such file or directory"}
12-07-25 10:37:42,779 Address Book: An uncaught exception was raised
12-07-25 10:37:42,780 Address Book: +entityForName: could not locate an NSManagedObjectModel for entity name 'ABCDContact'
12-07-25 10:37:42,783 Address Book: (
0 CoreFoundation 0x00007fff95661f56 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8fbfdd5e objc_exception_throw + 43
2 CoreData 0x00007fff95c41cb9 +[NSEntityDescription entityForName:inManagedObjectContext:] + 153
3 CoreData 0x00007fff95c80091 +[NSEntityDescription insertNewObjectForEntityForName:inManagedObjectContext:] + 33
4 AddressBook 0x00007fff9323c14e -[ABCreatePersonCommand createPerson] + 61
5 AddressBook 0x00007fff9323508e -[ABBookWindowController addPerson:] + 216
6 CoreFoundation 0x00007fff9565170d -[NSObject performSelector:withObject:] + 61
7 AppKit 0x00007fff97071f7e -[NSApplication sendAction:to:from:] + 139
8 AppKit 0x00007fff9715ebfb -[NSMenuItem _corePerformAction] + 399
9 AppKit 0x00007fff9715e932 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 125
10 AppKit 0x00007fff973fddd4 -[NSMenu _internalPerformActionForItemAtIndex:] + 38
11 AppKit 0x00007fff9728ca91 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 138
12 AppKit 0x00007fff970d8e0b NSSLMMenuEventHandler + 339
13 HIToolbox 0x00007fff98621448 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1263
14 HIToolbox 0x00007fff98620a54 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 446
15 HIToolbox 0x00007fff986378f3 SendEventToEventTarget + 76
16 HIToolbox 0x00007fff9867d99d _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 398
17 HIToolbox 0x00007fff98765035 SendMenuCommandWithContextAndModifiers + 56
18 HIToolbox 0x00007fff987ac7a9 SendMenuItemSelectedEvent + 253
19 HIToolbox 0x00007fff98676a6b _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 101
20 HIToolbox 0x00007fff9866e1b1 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 600
21 HIToolbox 0x00007fff9866d77a _HandleMenuSelection2 + 580
22 AppKit 0x00007fff96fd988a _NSHandleCarbonMenuEvent + 250
23 AppKit 0x00007fff96f6f381 _DPSNextEvent + 2019
24 AppKit 0x00007fff96f6e735 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
25 AppKit 0x00007fff96f6b071 -[NSApplication run] + 470
26 AppKit 0x00007fff971e7244 NSApplicationMain + 867
27 Address Book 0x00000001014850dc Address Book + 8412
12-07-25 10:37:57,152 Address Book: Invalid parameter not satisfying 'addressBook != nil'
12-07-25 10:37:57,229 Address Book: (
0 CoreFoundation 0x00007fff95661f56 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8fbfdd5e objc_exception_throw + 43
2 CoreFoundation 0x00007fff95661d8a +[NSException raise:format:arguments:] + 106
3 CoreFoundation 0x00007fff95661d14 +[NSException raise:format:] + 116
4 AddressBook 0x00007fff93097e73 -[ABRecord setAddressBook:] + 69
5 AddressBook 0x00007fff930cabd2 -[ABRecord initSpecialRecordWithUniqueId:addressBook:] + 145
6 AddressBook 0x00007fff9315104e -[ABSpecialGroup initWithUniqueId:addressBook:] + 94
7 AddressBook 0x00007fff93150fa2 -[ABSpecialGroup initWithAddressBook:] + 23
8 AddressBook 0x00007fff93107ed2 -[ABAllGroup initWithRemoteLocation:addressBook:] + 50
9 AddressBook 0x00007fff931078ba +[ABAllGroup allGroupForRemoteLocation:] + 172
10 AddressBook 0x00007fff9310780c +[ABAllGroup allGroup] + 32
11 LocalPreferences 0x000000010186a559 sortACEs + 729
12 Foundation 0x00007fff95f26b27 _NSGetCharValueWithMethod + 70
13 Foundation 0x00007fff95ee138e _NSGetUsingKeyValueGetter + 108
14 Foundation 0x00007fff95ee1315 -[NSObject(NSKeyValueCoding) valueForKey:] + 392
15 Foundation 0x00007fff95f00da2 -[NSObject(NSKeyValueCoding) valueForKeyPath:] + 348
16 AppKit 0x00007fff96f959ae -[NSBinder _valueForKeyPath:ofObject:mode:raisesForNotApplicableKeys:] + 654
17 AppKit 0x00007fff96f95698 -[NSBinder valueForBinding:resolveMarkersToPlaceholders:] + 171
18 AppKit 0x00007fff97350b55 -[NSEditableBinder enabledState] + 75
19 AppKit 0x00007fff97350906 -[NSEditableBinder _enabledStateWithMode:] + 41
20 AppKit 0x00007fff9716fdee -[NSEditableBinder _setStatesImmediatelyInObject:mode:triggerRedisplay:] + 391
21 AppKit 0x00007fff9716fc60 -[NSEditableBinder _observeValueForKeyPath:ofObject:context:] + 123
22 AppKit 0x00007fff96f87643 -[NSObject(NSKeyValueBindingCreation) bind:toObject:withKeyPath:options:] + 591
23 AppKit 0x00007fff96f80959 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1079
24 AppKit 0x00007fff96f76f73 loadNib + 322
25 AppKit 0x00007fff96f76470 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 217
26 AppKit 0x00007fff97117580 -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 150
27 LocalSource 0x0000000101598f62 LocalSource + 8034
28 Address Book 0x00000001014894ae Address Book + 25774
29 Foundation 0x00007fff95f0478e NSKeyValueNotifyObserver + 387
30 Foundation 0x00007fff95efe7b3 -[NSObject(NSKeyValueObservingPrivate) _notifyObserversForKeyPath:change:] + 756
31 AppKit 0x00007fff96f82ce3 -[NSController _notifyObserversForKeyPath:change:] + 206
32 AppKit 0x00007fff971ed50d -[NSArrayController didChangeValuesForArrangedKeys:objectKeys:indexKeys:] + 76
33 AppKit 0x00007fff971ed17c -[NSArrayController _selectObjectsAtIndexesNoCopy:avoidsEmptySelection:sendObserverNotifications:fo rceUpdate:] + 589
34 AppKit 0x00007fff9722fe7f -[NSArrayController _selectObjectsAtIndexes:avoidsEmptySelection:sendObserverNotifications:forceUpd ate:] + 83
35 AppKit 0x00007fff9722fe27 -[NSArrayController setSelectionIndexes:] + 27
36 Foundation 0x00007fff95ef8ca6 _NSSetUsingKeyValueSetter + 62
37 Foundation 0x00007fff95ef87d9 -[NSObject(NSKeyValueCoding) setValue:forKey:] + 400
38 Foundation 0x00007fff95f2aade -[NSObject(NSKeyValueCoding) setValue:forKeyPath:] + 349
39 AppKit 0x00007fff97241f43 -[NSBinder _setValue:forKeyPath:ofObject:mode:validateImmediately:raisesForNotApplicableKe ys:error:] + 243
40 AppKit 0x00007fff97241ab2 -[NSBinder setValue:forBinding:error:] + 260
41 AppKit 0x00007fff97506786 -[NSTableBinder tableView:didChangeToSelectedRowIndexes:] + 136
42 AppKit 0x00007fff97625292 -[_NSBindingAdaptor tableView:didChangeToSelectedRowIndexes:] + 153
43 AppKit 0x00007fff970d8459 -[NSTableView _sendSelectionChangedNotificationForRows:columns:] + 139
44 AppKit 0x00007fff970aef5a -[NSTableView _enableSelectionPostingAndPost] + 425
45 AppKit 0x00007fff970a5425 -[NSTableView _tileAndRedisplayAll] + 358
46 AppKit 0x00007fff970a9b10 -[NSTableView viewDidMoveToWindow] + 78
47 AppKit 0x00007fff97080a55 -[NSView _setWindow:] + 2618
48 AppKit 0x00007fff970826eb -[NSControl _setWindow:] + 94
49 AppKit 0x00007fff96faeac8 __NSViewRecursionHelper + 25
50 CoreFoundation 0x00007fff955efcb4 CFArrayApplyFunction + 68
51 AppKit 0x00007fff97080a3e -[NSView _setWindow:] + 2595
52 AppKit 0x00007fff96faeac8 __NSViewRecursionHelper + 25
53 CoreFoundation 0x00007fff955efcb4 CFArrayApplyFunction + 68
54 AppKit 0x00007fff97080a3e -[NSView _setWindow:] + 2595
55 AppKit 0x00007fff970870bc -[NSScrollView _setWindow:] + 225
56 AppKit 0x00007fff96faeac8 __NSViewRecursionHelper + 25
57 CoreFoundation 0x00007fff955efcb4 CFArrayApplyFunction + 68
58 AppKit 0x00007fff97080a3e -[NSView _setWindow:] + 2595
59 AppKit 0x00007fff96faeac8 __NSViewRecursionHelper + 25
60 CoreFoundation 0x00007fff955efcb4 CFArrayApplyFunction + 68
61 AppKit 0x00007fff97080a3e -[NSView _setWindow:] + 2595
62 AppKit 0x00007fff9707ec6d -[NSView addSubview:] + 405
63 AppKit 0x00007fff9724adfe -[NSBox setContentView:] + 74
64 AppKit 0x00007fff974715ce -[NSPreferences _selectModuleOwner:] + 2557
65 CoreFoundation 0x00007fff9565170d -[NSObject performSelector:withObject:] + 61
66 AppKit 0x00007fff975bd1bc -[NSToolbarButton sendAction:to:] + 82
67 AppKit 0x00007fff975bd20a -[NSToolbarButton sendAction] + 68
68 AppKit 0x00007fff9710fa4f -[NSToolbarItemViewer mouseDown:] + 4995
69 AppKit 0x00007fff9703b348 -[NSWindow sendEvent:] + 6306
70 AppKit 0x00007fff96fd4a55 -[NSApplication sendEvent:] + 5593
71 AppKit 0x00007fff96f6b0c6 -[NSApplication run] + 555
72 AppKit 0x00007fff971e7244 NSApplicationMain + 867
73 Address Book 0x00000001014850dc Address Book + 8412
12-07-25 10:38:13,514 Address Book: Error creating source folder ~/Library/Application Support/AddressBook: Error Domain=NSCocoaErrorDomain Code=4 "Le fichier « AddressBook » n’existe pas." UserInfo=0x7f86c512a0c0 {NSFilePath=/Users/yvestasse/Library/Application Support/AddressBook, NSUnderlyingError=0x7f86c510b670 "L’opération n’a pas pu s’achever. No such file or directory"} -
Cannot place image on contact in Address Book
Hello,
When trying to place an image by either dragging and dropping, editing and double clicking on the image placeholder the image does not stay.
I have opened console and found the following when trying to drop an image (it can be any image, jpg, gif, png of any size)
28/09/11 6:49:52.640 AM Address Book: Error deleting large image: Error Domain=NSCocoaErrorDomain Code=513 "“10DB0044-275C-49E1-9070-C7E7A9715E8F-e2acd380.tiff” couldn’t be moved because you don’t have permission to access “Images”." UserInfo=0x7f90deaf4580 {NSUserStringVariant=(
Move
), NSDestinationFilePath=/Users/rachealleeb/Library/Application Support/AddressBook/Images/10DB0044-275C-49E1-9070-C7E7A9715E8F.jpeg, NSFilePath=/Users/rachealleeb/Library/Caches/com.apple.AddressBook/10DB0044-275 C-49E1-9070-C7E7A9715E8F-e2acd380.tiff, NSUnderlyingError=0x7f90e230bdb0 "The operation couldn’t be completed. Permission denied"}
I have repaired disk permissions but it has made no difference and I am an administrator of the computer
Please helpI worked it out.
The Images folder within: /Users/rachealleeb/Library/Application Support/AddressBook/ had no access. Gave myself Read write. all is good. -
Hi!
When I try to access GW address book by calling
DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or even
DIGWMessage::Send, I'm getting messagebox with title "Address Book Error"
and message: "The 'MAPI Session Handle' of the Novell GroupWise 'Object
Request Broker' could not be accesses. The address book cannot run (error:
status: 0x80004005)."
I'm using .NET and I only get this error when I create a console
application. With windows application everything goes fine.
I've tried reinstalling GW client, running fixmapi utility, installing
different versions of MAPI CDO, but still got this problem.
Any ideas?In the Application object.
>>> On Monday, July 26, 2010 at 4:16 PM,
shutchinson<[email protected]> wrote:
> Where would we set this?
>
> Thanks!
>
> Scott
>
> Preston Stephenson;1755943 Wrote:
>> Do you need to use the MAPI address book providers?
>> Can you use MultiLogin and set MultiLoginAddressBookSupport = TRUE?
>>
>> Preston
>>
>> >>> On Tuesday, November 11, 2008 at 4:22 AM, Vladimir
>> Iofik<[email protected]>
>> wrote:
>> > Hi!
>> > When I try to access GW address book by calling
>> > DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or
>> even
>>
>> > DIGWMessage::Send, I'm getting messagebox with title "Address Book
>> Error"
>>
>> > and message: "The 'MAPI Session Handle' of the Novell GroupWise
>> 'Object
>> > Request Broker' could not be accesses. The address book cannot run
>> (error:
>>
>> > status: 0x80004005)."
>> > I'm using .NET and I only get this error when I create a console
>> > application. With windows application everything goes fine.
>> > I've tried reinstalling GW client, running fixmapi utility,
>> installing
>> > different versions of MAPI CDO, but still got this problem.
>> >
>> > Any ideas? -
I am running MS Word 2011, latest Mac OS, and trying to use the Mail Merge option with the Apple Address Book as the data source.
However whenever I select the Apple Address Book as the data source, I get the error "Word was unable to open the data source".
Anybody got any idea why?
Thanks for your helpI am guessing you could have solved this little problem already but perhaps someone else may benefit:
I struggled with the same problem - not being able to use Mac Address Book (i.e. Contacts) with Word 2013 for mac mail-merge (on Mountain Lion and, now, on Mavericks) - with the exact same error message reported by Klausngigtoas above .
So I read lots of techie stuff on forums which passed a nice few hours but didn't help. Finally, with slumped, defeated expression, I gave up.
But I just now (such is life) I accidentally stumbled upon the simple solution:
1. Enter System Preferences and click Security & Privacy.
2. Select the Privacy tab and then on Contacts on the left hand panel.
3. In the right hand panel ("Allow the apps below to access your contacts") just tick the Contacts box.
4. And Voilà! - at least it worked for me - hope it does for you. -
Address Book, Spotlight ERRORS!
Hello members and outside viewers,
These are software related issues, but I think of might be Mac Pro specific. I migrated everything from a G5 some time ago, but these issues occured in the near past.
First: My Address Book behaves very strange.
After startup, the window freezes. Only if I minimize and click again, works OK. I began used to it, BUT
Since yesterday, Addresses gone, disappeared from every entry.
Under Preferences » Address Format is uneditable, it has "Item3" in it, unclickable drop down menu.
Under Preferences »Template » Add Field several options are grey: "Phone", "Email", "Related Names", "Instant Messaging", "Address".
Please can you help me! I deleted both plist files from Preferences folder and deleted the whole folder under Application Support/AddressBook, also reinstalled Address Book from Leopard DVD, but nothing helped so far.
Second thing: when I invoke Spotlight, and start typing after 2-3 seconds, it quits and also Dock unusable, restarts automatically. Spotlight is useless, it behaves every time like this. Spotlight in Finder windows are OK, system-wide menubar has this error. Also, it was suddenly gone wrong like Address Book. Can I think of some virus?
P.S. (off topic), might helpful to share: very frustating, that registering to Discussions took me over an hour.
With Safari 4.03 the "Name" and "AppleID" are blank fields on "Create New User Account", therefore impossible to proceed. ( Error: invalid AppleID. Please login with a different AppleID )
With Firefox you can actually see them, but "?" instead of accounted letters.
After changing My Info, I finally realised that Apple ID should be complete e-mail address.
That means my "visionfresh" account is totally different from "[email protected]" (or me.com, whatever..)
Not to mention that I created a new Apple ID, that was also not working.
Bottom line: my "[email protected]" account is working also in Safari after editing my Name (replace accented characters), but I could not proceed with the nickname "visionfresh", I chose "matyashuszar".{quote:title=Console.App shows this when starting Address Book}
2009.09.03. 18:45:48 Mail[228] SyncServices[ISyncSessionDriver]: Caught top level exception: I/O error for database at /Users/matyashuszar/Library/Mail/AvailableFeeds. SQLite error code:1, 'SQL logic error or missing database' Stack trace: (0x91ffcfeb 0x966c4e3b 0x92071f1a 0x920713f8 0x9206d18b 0x920a2e40 0x92097c2d 0x920977da 0x92077001 0x38767c 0x38758d 0x38751a 0x92061302 0x920a7260 0x920a6ad4 0x920a67ff 0x920633c8 0x92062f99 0x92061ea0 0x387303 0x38748e 0x1627da55 0x94ddd1e8 0x94dc923d 0x94e632cb 0x904d1dfd 0x904d19a4 0x95d56155 0x95d56012)
2009.09.03. 18:51:27 Address Book[6144] -[ABAddressBook setDefaultCountryCode:] called with unknown country code 'us'
2009.09.03. 18:51:27 Address Book[6144] NSScanner: nil string argument
2009.09.03. 18:51:27 Address Book[6144] * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
{quote}
Please help what to to do! -
"Error while printing" error in Address Book
When I attempt to print a list of address book contacts in Address Book.app (both as a PDF or to a printer), I receive an error message simply stating "Error while printing." I've repaired my permissions and tried deleting the preferences for Address Book. How can I fix this and print out the list?
After discovering that my problem was more general (affecting the whole system, and not just Address Book), I looked in the Printer forum here in the discussions and referred to this one:
http://discussions.apple.com/thread.jspa?messageID=1264657�
I attempted to do as one user suggested and replace the 'libConverter.dylib' file. It did not work, and I returned the original 'libConverter.dylib' file to its folder. Magically, printing works now. Seems like it just needed to reset itself.
Maybe you are looking for
-
Trying to create a condition on a BW Universe
Hi experts, I'm trying to create a condition on a BW-Query Universe just like below: <EXPRESSION> IIF([0HALFYEAR1].[LEVEL01].[[20HALFYEAR1]].[Value] = 1 , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7] , [Measures].[DA
-
Why are my video edits not being saved on Photoshop CS6?
Why are my video edits not being saved on Photoshop CS6? I made a TON of edits in a video group, then duplicated that group into another file... and all my edits are gone. I spent hours working on this, so please let me know what the hell happened an
-
How to view greeting card in mail, non-animated?
In Windows everyday I got a greeting card from my 97 year old sister. She still sends them to my Imac and I can hear the music, but no picture. It is not an internet card, it is just a simple Hallmark program. Seems like this brand new iMac should op
-
How do I delete album artwork that came w/ a brand new ipod =no music on it
I recently purchased a new ipod Classic (80 gig) at a nationwide electronics store. The first time I turned it on it had an album cover of Manu Chao on the Main Menu. There is no music on the ipod yet the album cover is there. The store's corporate o
-
How do I add a folder of bookmarks from my "downloads" folder to the bookmarks directory?
I am trying to move a large number of bookmarks from my old computer to my new one, but can't seem to load them "en mass" to my bookmarks directory. Thanks for any help.