Address Book Version 4.1 (687) can not add new contact Leopard OSX 10.5

Well, I have tried to add a contact using Mail, or using Address Book.
No-Go.
The "New Card" under File->New Card is even grayed out. I have over 16 Gigs of space available, so it is not a space issue on the hard drive.
I do use and sync with i-Phone, could that be an issue?

What happened when you tried to revert to backup on the Tiger machines? The data structures used by Leopard Address Book are completely different from those used by Tiger.
You should be able to get the notes transferred in vCards - make sure that you have the option set in Leopard Address Book's vCard preferences.
AK

Similar Messages

  • Address book file (.mab) is in profile but when i view address book, nothing shows and i can not enter new addresses.

    aftrer the last update my addrerss book is not visable. if i create a new address book i can add names and addresses to it but my old address book, which is in the same folder does not open.

    Hello Bob.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • Can not add new contact to the phone, screen gives no place to type in name

    In the past had no issued adding a new contact to iPhone 5s, now when that screen is opened there is no possibility to type names phone number etc.
    How do I fix this?

        Let's get your contacts updated, Scoop29! May I ask what software version are you running? Check through Settings>General>About. Are you given any " " or Edit option for existing contacts? I am eager to get to the bottom of this!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Hello, i'm using Iphone 5, with ios 7  . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac.  What can i do ?

    Hello, i'm using Iphone 5, with ios 7  . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac.  What can i do ?

    Hello, i'm using Iphone 5, with ios 7  . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac.  What can i do ?

  • I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    Set up iCloud
    Set up iCloud (2)

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • How can i add new contacts to the adress book? iOS5

    i've just upgrade to iOS 5 and i notice that i can't add new contacts to my adress book beacuse there is no + button

    I've solve the problem, you just have to sync your contacts with iCloud, that solve my problem i hope it helps you

  • Can not add new program unit in form

    We have a form developed using developer 6i in which we can not add new program units. If new program unit is added and form is saved and closed then after opening the form again, newly added program unit can not be seen in object navigator as well as it can not be found using search. Such form fails to compile as the calls for new program unit exists but the program unit is lost. The problem persists even if another copy of form is made using Save As option.
    What could be the reason of this problem?
    Thanks

    Hmmm... I have never had the problem. Two forms I have been working on lately are 1808 KB and 1424 KB. This is their compiled-and-saved size. Their "cleaned up" size is 792 KB and 604 KB.
    <p>Do you know about the semicolon - semicolon replacement trick for reducing fmb size? Read this thread:
    <br>    Re: FMB size shrinks dramatically
    <br>And a related thread:
        Re: Why does this happen - find ';', replace with ';'?
    <p>I sure wish Forms had a Preferences setting labelled:     Remove compiled code when saving.

  • HT204406 i can not add new music to my itunes to put on my iphone how do i do that

    can not add new music to my itunes to put on my iphone how do i do that

    please i waiting for your help...i waiting

  • Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

    I can't add new contacts after upgrading from Snow Leopard to Mountain last week.  I do not use iCloud.  Any suggestions?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

  • Can not add more contacts on address book

    Hello
    i have a blackberry curve 8520.
    at the momment i have 288 contacts but i can not add more. I go to menu, address book, new contact, the window give me the options, i add the information (name, phone, email, etc) and when i want to save the contact it do not save
    i tried to reboot removing the battery for a minute and restart but still with the same problem.
    Also i figured out that when y sync my bb with the desktop manager, the address book is not sync it says (Adress book not installed) that is why i can not swipe the contacts to reinstall the info because i have no back up of the address book
    Please i need some help with this issues
    thanks
    Solved!
    Go to Solution.

    While there is no hard limit on how many contacts you can have in your device, there is a soft limit in that you can only have as many as your device memory can handle. Check your available memory to see if you have any remaining space. If not, then consider cleaning out/uninstalling some things you do not need in order to increase available memory for more contacts.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

  • Can not add new printer

    I reset my printer list on my mother's MacBook and tried to add a new printer. There are no printers to add in the Add Printer list. I ran Repair Disk Permissions and still I can not add any printers through the System Preferences>Print & Fax. Why are there no printers to select?

    Try reinstalling the printer drivers (software) that came with the printer or go to the printer manufacture web site and download the drivers there.

  • Can't add new Contact

    After I clean installed my Macbook last week with Maverick, I sync my old file with TIme Machine, and I had to reinstall the whole system due to a problem with permission in a system wide range ! After that, everything look clean, but I just realised, that I can't add any new contact, all my old contact still there, but there's nothing I can do to add new contact !

    Take a look here: Can't add or edit contacts

  • Address book disappear, Application Support folder can not be opened

    My address book disappear from my MacPro, I know it is in the User Library-Application Support folder, but when I try to open that folder, it has a red tag on the folder and it said I have no Authority to open that folder, I am the only one using this machine, never have this problem.  And it will not allow me to restore the address book from Time Machine back to this folder.  What's wrong? I think I need to figure out why it wont let me open the Application Support folder, could anyone help? thanks. 
    One Symptom:  when I run the address book App, and try to import  address file, the Menu bar- File-the Import dialog was greyed-out and can not be used.

    Could you please check the Sharing &permissions of these two folders (command +I). Check to see if you have "Read&Write access to these folders. It should be your user name with read&write privileges.
         You will have to open the lock on the bottom right and it will request the admin password. Should your name not be there, select it by clicking on the plus sign on the bottom right and selecting your user name. Select Read&Write privilege and under the gear wheel beside the plus and minus signs,Make sure you apply to enclosed items.
          It sounds like you somehow got them buggered. Rebuilding the permission table should of cleared up the problem. This could be a case of booting with your install DVD and rebuilding permissions from there.
                                                            Food for thought.
    Next time you even think of modifying anything in you user library, Duplicate the whole folder and then you have a reference to go by. Just make sure that it is deleted after you are finished. This should be a standard step when troubleshooting. Changing something.....make a copy.

  • Can't add new Contact in address book

    I am trying to add a new contact in the address book by using the + sign at the bottom of the list of names, and it just switches to the next contact. It does NOT create a NEW contact. Is there a limit of contacts for the address book that I am not aware of ?
    Thanks in advance

    Have you tried adding a contact from the file menu?
    hpr3

Maybe you are looking for

  • Can't connect to wifi in hotels in Ireland with iPhone 5

    Can't connect to wifi in hotels in Ireland with my iPhone 5. My iPad 3 works fine. When I enter the wifi password for the network I always get the error message "Incorrect password for XYZ". No problem with iPad 3.

  • Payment history made against  PO(Purchase Order)

    Does anyone know of a BAPI or standard SAP FM that will provide me with a list of payments made against an Purchase Order . Deepak

  • Checking the initiality of the fields while creating  entries for a table

    While creating entries using table maintenance generator(TMG) i need to check the initiality of the fields.Are there any such events? I know i can go and change in the screen by making it mandatory or by writing a module in the PAI of the screen of t

  • Double print in one line,when convert spool to PDF

    Dear Expert: I have a problem to solve when convert spool to PDF,there is one line will double imaged. The form is created by smartforms. I have tryed many ways,retype the text or start a new line,all didn't works. So could any one tell me how to sol

  • Strange name of generated XML table

    Hi, I have registered schema and I got XMLType table with name like: "mainElem514_TAB". I know that I can use annotation to change the name. Is it possible to generate the table(without annotation) with name mainElem514_TAB ? I mean without "". regar