Address Cleanse Fault Code

Hi,
I'm using US Regulatory address cleanse transform to clean our addresses.
Some address has return FAULT_CODE
like E412, E420, E421 etc
and STATUS_CODE : SA0000, etc
Does anyone know what these code means or if there is a look up table for this.
I've look at documentations and search the web/forum but not able to find anything.
Any help would be greatly appreciated.
Thank you,

Henry,
There are also custom functions which translate status codes into their descriptive form in an appended column.  I use "CF_AddressStatusCodeDescriptionEN" frequently.
I believe that you can get a copy of this custom function if you download the BOBJ Data Services data quality blueprints from SAP Data Services Blueprints
Enjoy

Similar Messages

  • DataServices Global Address Cleansing code 3010 issue

    Hello,
    During the address cleansing we're getting "3010 . Locality, region, and postcode are valid. Unable to match primary name to directory." I don't understand what this means since the address is valid.
    Appreciate your insight
    Cheers
    Tansu

    Hi Tansu,
    Please check this KB Article[1589996|https://service.sap.com/sap/support/notes/1589996].
    Let me know if it helps.
    Thanks,
    George
    Edited by: George Ruan on Oct 6, 2011 2:34 AM

  • DataServices Global Address Cleansing code 3010

    Hello,
    During the address cleansing  we're getting "3010 . Locality, region, and postcode are valid. Unable to match primary name to directory." I don't understand what this means, since the address is valid.
    Appreciate your insight
    Cheers
    PS: Is this the right forum to post a DataServices question?
    Tansu

    Hi Tansu,
    Please check this KB Article[1589996|https://service.sap.com/sap/support/notes/1589996].
    Let me know if it helps.
    Thanks,
    George
    Edited by: George Ruan on Oct 6, 2011 2:34 AM

  • DQXI USA Regulatory Address Cleanse - Multiline Address Parse Drops Lines

    I'm trying to standardize an address (using DQXI USA Regulatory Address Cleanse) that contain address and building/room data. The standardization process seems to drop important pieces of the address that are needed for delivery.
    Input Data
    FirstName: Joe
    LastName: Smith
    Address: One University Boulevard
    AddressExt: Allison Hall 206-B
    City: Somewheresville
    State: MN
    Zip: 55558
    Cleanser Input Mapping
    Address -> MultiLine1
    AddressExt -> MultiLine2
    City -> Locality1
    State -> Region1
    Zip - > PostCode1
    Output
    best_delivery_primary_secondary_address: 1 UNIVERSITY BLVD
    No other standardized output field has the complete address.
    Obviously, this is missing the necessary "Allison Hall 206-B" information.
    Tried These Things
    Varying the cleanser's standardization options
    Mapping the input Address columns to Address_Line (which yields Allison Hall 206-B as the best_delivery_primary_secondary_address )
    Adding additional cleaner component output fields to try to access additional address data ( Extra1, Extra2, Extraneous_Secondary_Address_Data, Address_Line_Remainder1 ) and the data seems to be blank for the most part.
    Working with the global address cleanse, but will little luck other than passing through uncleansed address data.
    Questions
    Is there any way to get the address to be cleansed/standardized and maintain the valuable address data?
    Perhaps will I have to stitch multiple cleansers together to get both th USA-only fault-code along with some more flexibility in the global address cleanse?
    Another more reliable approach (like concatenating the address data and treating all as Multiline input data?

    I'm actually using the best output fields, I think the projects came defaulted to the best settings and I haven't changed them.  I did disable ELOT, DPV, RDI and LACSLINK as I don't need any of those features, but that's about all I've changed in the project..  The project is failing attemping to unregister the USA reg Address CleanseCass_UsaRegAddressCleanse_Transform.
    >
    Ryan Champlin wrote:
    > I'm guessing that you are using the "Stadardized" output fields rather than the "Best" output fields?  If you use the "Best" fields I think you'll be fine.
    >
    > Could you let me know if you got this working or if this works and we can go from there.
    >
    > Thanks,
    > Ryan

  • Address Cleanse Question

    Hello,
    I am cleansing some usa and germany address data using the global address cleanse transform with usa and emea engine turned on.
    Some data have only the street but missing postal and city. After it went through the transform, the global address cleanse outputs the PRIMARY_NAME1 as empty field for the USA data but it is able to output the PRIMARY_NAME1 with the street name for the germany records
    Am i missing any options or is this how it works??

    Hi,
    Thanks for the reply.
    I meant that both usa and germany address has only street and country information and without other information.
    And of cos without sufficient information, global address cleanse would not be able to correct it.
    The difference i am having is that, after global address cleanse, the PRIMARY_NAME1 field of the output field of the germany record is filled up as what we gave for the input However, the PRIMARY_NAME1 field of the output field of the USA record is blank.
    Both records are of status info code 2000 (Unable to identify locality, region, and/or postcode information on input. )
    So the question is that, if the USA engine is not able to cleanse the data, would it map the input street field onto the output PRIMARY_NAME1 field? Or would it give a blank PRIMARY_NAME1 field?

  • Address cleanse output to be in English instead of German.

    During address cleansing, region names in the addresses being processed by BODS are coming in their local country language names. For example one german region name output is coming as "Nordrhein-Westfalen" instead of the English description "Nrth Rhine Westfalia".
    I have set the script code to Latin and Output Country Language to English in the address cleanse transform. But still I am getting the same output.
    Also I am using the German Address pack for the address cleanse transform mentioned above.
    Any pointers to solve the issue mentioned above would be greatly be appreciated.
    Thanks.

    The LATIN script code tells the address engine to use the Latin character set used by English and the Western European languages.  The OUTPUT_COUNTY_LANGUAGE option applies to the country field only.  If you want to post the regions in English you can use a lookup table or search/replace table to convert.

  • blank values using Global Address Cleanse Transform

    Hi,
    We are trying to cleanse Global Addresses using Global Address cleanse transform. (with USA and Global Engines). We are passing Locality, Region and Postal code as multiline items. In the output some of the records are not getting populated. For these records if we keep USA as defult country then the fields are getting populated. The problem is we cannot take USA as defult country because it has global addresses and for other countries also it is filling USA as country name. Why is it that without giving USA as default country the fields are not getting populated for some records?
    Below are some of the sample addresses.
    1)     10 INDUSTR. HWY MS6     LESTER     PA     19029
    2)     PO BOX_22964     JACKSON     MS     39225
    3)     306 EASTMAN     GREENWOOD     MS     38930
    4)     3844 W NORTHSIDE DR     JACKSON     MS     39209
    5)     259 W QIANJIANG RD     ZHEJIANG     CN     31440
    Can you please suggest a way to fill the countries for these addresses? Any inputs on this will be appreciated.
    regards,
    Madhavi

    Hi,
    As Lance indicates, you set up your address cleanse (for US I would suggest using the URAC transform) and map in your input fields as normal.  In the output, you will select to output postcode2 along with all the other standardized fields you want posted in the output.
    Note:  If an address is assignable using the CASS rules established by the USPS to the USPS referential data, the postcode2 will be populated.  In cases where it is not assignable, the postcode2 can be empty or the input postcode2 data could be preserved based on a user's settings.
    Thanks,
    Paula

  • Global Address Cleanse Transform - (Japanese To English conversion)

    Hi All,
    Is there way I can provide the input to Global Address Cleanse  Transaformation (Japan Engine) in uniocde (Japanese - KANA ) and get the output in english like provide input LOCALITY1 as 高島市 but get the output in english like  "Takashima City".
    Thanks,
    Amit

    Data Services XI 12.1 Technical Manuals, Designer Guide, Data Quality, Page. 555:
    Caution:
    The USA Regulatory Address Cleanse Transform does not accept Unicode
    data. If an input record has characters outside the Latin1 code page
    (character value is greater than 255), the USA Regulatory Address Cleanse
    transform will not process that data. Instead, the input record is sent to the
    corresponding standardized output field without any processing. No other
    output fields (component, for example) will be populated for that record. If
    your Unicode database has valid U.S. addresses from the Latin1 character
    set, this transform processes as usual.
    Best regards,
    Niels

  • 4.0 webservice does not work when Address Cleanse is used

    Hello,
    For my real time web service, I am unable to add any address cleansing transforms and make it work. The web service works fine as long as I do not add any address cleanse transform.
    As soon as I add any address cleanse transform and try to start the service,  the real time services list icon would turn yellow for more than 10 mins with the status stuck as "Service Starting"
    The code in designer complies fine. The address cleanse transform works fine with batch jobs. Web services without address cleanse transforms work fine. Am not sure what the problem might be.
    It'd be great if you could give some pointers on how to resolve it.
    Thanks for looking.
    Regards
    T.

    Hi Vidya,
    Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
    Regards,
    Hilary

  • Data Services - Address Cleanse

    Hi,
    What dir files do I need to have to be able to run the global address cleanse for the UK?
    I have the following files in my reference_data folder
    ga_region_gen.dir
    ga_country.dir
    I am guessing I need
    ga_loc12_gen.dir,
    ga_loc12_gen_nogit.dir,
    ga_loc34_gen.dir
    Is this correct?  Currently when I run the address cleanse I am getting an INFO CODE of 1030 which is country ID not found.  I have set the country to be United Kingdom as a constant in the options.
    Thanks

    Clark,
    you either need to download one of the following additional Address Directories
    - Address Directory - All-World
    - Address Directory - United Kingdom
    for Data Services XI 3.x from the SMP. To have access to them you need a Annual Subscription to the Directories.
    Niels

  • USA and Canade Engines in Global Address Cleanse

    Hi All, My client has license for All world directories. We deployed all world directories on BODS 4.0 application. I can see ga_all_world_gen" and "ga_country" directories but not any other. When I use Global address engine then it works fine for other countries data. But when I use Canada engine then I got error that cancity.dir is missing. When I use USA engine then I get error for some other directories missing.
    Do we need separate license to use Canada or USA engines? Can I cleanse USA and canada addresses using Global Address engine?
    Thanks,

    hi,
    I am not sure about the licenses issue.
    If you are using Global Address Cleanse, usa and canada addresses can also be cleansed but only country, city and postal code. Street level can be cleanse if you have the country specified address directories.

  • Canada Address Cleanse Logic

    Hello,
    Is there anyone here familiar with the Canada Address Cleanse transform/dictionary. I am trying to cleanse a few badly formed addresses and can't seem to.
    For example if I have a valid postal code but no city and province, I would assume I would get at least this information back. I have tried running the same information through the global suggestion list transform. I actually get city back but not province.
    It seems very strange to me that it would not solve this simple look-up, or am I expecting too much logic from these cleansing transforms.
    Bill

    Paul,
    Thanks again for responding to one of my questions. I did come to that conclusion about the engine after running a bunch of different tests. Also I did begin to hard code the FSA map into a query transform.
    I must say I am surprised that there is no post code reverse look-ups. I have worked with the data direct from Canada Post before and we were able to implement this logic in other applications, programmatically of course.
    Is it mentioned anywhere in some documentation what look-ups each postal engine does perform?

  • DQ Address Cleanse reference

    Hi all,
    I'm looking for a document that lists all of the available DQ Address Cleanse reference files and the countries supported by each reference file.
    I need this info because I have to submit it to a client before they decide what they need to purchase.
    I've searched the SAP marketplace (logged in with my partner account) but can't find the relevent docs.
    It may be in there somewhere, so could just be my ignorance.
    Any advice much appreciated.
    Thanks,

    James,
    Address Cleanse reference file names are not published, as the names can change.  Why does your customer need to know the reference file names when all they need to do is look at a list of supported countries?  Such a list should be available in the sales area of SMP.
    The SAP BusinessObjects Data Seervices Technical Manual contains a similar list.  Search for Country ISO codes and assignment engines.
    Paul

  • Input Field Layout - Documementation For Various Address Cleanse Engine

    Hi All,
    Where I can get a documentation for input field layout for various address cleanse engine available in Global Address Cleanse transformation:
    1. Australia
    2. Canada
    3. EMEA
    4. Global Address
    5. Japan
    6.USA
    Thnaks,
    Amit

    Hi,
    Thanks for the reply.
    I meant that both usa and germany address has only street and country information and without other information.
    And of cos without sufficient information, global address cleanse would not be able to correct it.
    The difference i am having is that, after global address cleanse, the PRIMARY_NAME1 field of the output field of the germany record is filled up as what we gave for the input However, the PRIMARY_NAME1 field of the output field of the USA record is blank.
    Both records are of status info code 2000 (Unable to identify locality, region, and/or postcode information on input. )
    So the question is that, if the USA engine is not able to cleanse the data, would it map the input street field onto the output PRIMARY_NAME1 field? Or would it give a blank PRIMARY_NAME1 field?

  • Output Language in Global Address Cleansing

    Hi,
    How can the DQ Global Address Transform be restricted to give all the out put field values in English text?
    Even though the input text is in English, DQ transform gives the address field in Non English characters as its a Hungarian address.
    Is there a way to force it to give in English only?
    Many thanks,

    Global Address Cleanse Transform - Enterprise Information Management - SCN Wiki
    Go to this URL

Maybe you are looking for