Address DFF segments are not required.

Hi,
In Address DFF, State and County segments are defined mandatory. But in SSHR they are not displayed as required fields?
How can i make them required using personalizations? or Do i need to customize to make them required?
Any Pointers?

Is it a seeded page or custom one? If it is a seeded page, you can log a tar and follow. Just to be sure of this behavior, also try to create a test page with the same DFF and check the outcome. Ideally, it should show the * sign.
--Shiv

Similar Messages

T/F: iPhone users are not required to pay $15/month extra for Good Technology

I have a personal Droid RAZR M. You may wonder why I am posting in the iPhone forum but you are about to find out.
I have access to corporate e-mail via Good Technology. When I got this service set up at the same time I acquired the phone, I was required to upgrade from a $30/month 2GB plan to a $45/month 2GB plan just to have this access ("needed for access to company servers"). That was a surprise but I got over it. However, since then, I have come to learn the following:
1. It appears that other than VZW, no other carriers are charging users extra for access to Good Technology.
2. Based on a colleague's information from a Good Technology support engineer and a office mate who is using a VZW iPhone, VZW iPhone users are *not* *required* to move to an Enterprise plan aren't paying an extra $15/month. If one searches the Internet, I am not the only one asking about this.
If you are using a Verizon Wireless iPhone and have Good Technology on your phone, would you let me know if were *required* to upgrade your data plan and pay extra just for using Good Technology?
Thanks,
Techvet

I need to check some information at work about this, since they have some guidance on how their employees can connect to their corporate email with android and iphone devices.

Mapping Error: Mappings are not required for this Integrator

Hi,
when I created my upload integrator with the Desktop Integrator Manager (12.1.2) I am not able to attach a mapping to it. I get the following error:
Mapping Error: Mappings are not required for this Integrator because the ability to download information has not been enabled.
Does anyone know what I've missed?
cheers
Jeroen

Hi ,
Without creating the content if you are trying to do mapping this error will come.
Solution:
Create the content and then do mapping..
Regards,
Sreekanth.S
Edited by: user12045904 on Dec 9, 2010 10:55 PM

How do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?

how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.

You can enable / disable this option in System Preferences:
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks

HTTP and RFC Adapter are not Required Sender

Hi All,
I have one dought....
Why Plain HTTP and RFC Adapter are not Required Sender Communication Channel and Sender Agreements...
I Know this two Adapter are in ABAP Stack....
Please clarify my dought...
Regards

Idoc Adapters do NOT require Sender Communication Channel.
The Sender System identifies itself at the Integration Server, with the fields SNDPOR and Client of the Control Record.
Sender Communication channels are used for communication betweeen the Application System and the Integration Server.
In the case of Idocs, all idocs are tranferred to the Integration Server pipeline and NOT to the regular EDI/IDOC interface.
The RECEVIER DETERMINATION is based on the values in the Control Record.
If you are doing ALE, then you have to maintain the idoc types which are NOT to be transferred to the Integration server by executing report IDX_SELECT_IDOCTYP_WITHOUT_IS.
By maintaining the Idoc Types using this report, only these idoc types are sent to the regular EDI/IDOC interface.

Which packages are not required?

Hi Friends,
Initially, I was trying to install arch by just installing base and then going ahead, but was unable to get X. Then, I installed base+X11+X11 libs+ X11 something (dont remember..) and after a lot of trouble, finally got XFCE installed and running (though still problems with fontsand have posted another query in desktop environment section). I have noticed that in doing so, I have installed a lot of things that are not required for my system, like xf86-input-bla bla and xf86-vide-bla bla, I know that only a few of them are required, but i'm afraid of uninstalling anything given that could break the system.
So, is there a way to determine which packages are being used by my system and which are required so that I can free up some space and make my box more slim.
Please post your opinions. Thanks in advance.
Ravi S Ghosh

FUBAR wrote:
[22:30:01|foo@bar:~] $ pacman -Q --help
usage: pacman {-Q --query} [options] [package]
options:
-e, --orphans list all packages that were explicitly installed
and are not required by any other packages
o_O
There are two notions of "orphan". As it is meant in the orphan script, a package is an orphan iff it is not needed in a working system. This is an intrinsically vague target, which can be focussed only through a partial heuristics.
In the sense of the -Qe pacman option, an app is an orphan iff it is not a dependency of another package. In this sense, many vital apps -- explicitly installed -- in a system are orphans.
However, it is true that pacman -Qe allows to have a list of the top-level apps (the stuff you know what it is, without the libraries etc.). If you identify in the list of pacman orphans the apps you do not need and then remove them with 'pacman -Rsc', you clean your system pretty well.
However, you should be careful, many problems can be foreseen when you do not know what it is the package you are removing.

How to Show All Packages, That are not required by any other package

I need a way to see al the installed packages thar are not required by any other package
Thanks in advance ...

You probably want pacman -Qt or pacman -Qdt
Check out man pacman.

Profitability Segments are not created for Invoices

Hi Guru's
Can any one help on this ?
"Invoice Documents Profitability Segments are not created" can you please suggest me?
Thanks,
Aakash

Hi Aakash,
I think you are trying to integrate FICA with CO-PA and then getting the error.
The posting of a contract accounts A/R & A/P document in CO-PA is dependent on-
(a) Activation of the operating concern in the SPRO node Controlling → Profitability Analysis →
Structures → Define Operating Concern → Maintain Characteristics
and
(b) CO short account assignment of the contract in the SPRO Node Financial Accounting → Contract
Accounts Receivable and Payable → Basic Functions → Posting and Documents → Documents
→ Define Account Assignments for Automatic Postings → Store CO Short Account Assignments
for IS-U Contracts.
In here, the system only carries out the posting if the Profitability Segment Assigned selected in CO
account assignment.
Hope it helps...
Thanks,
Amlan

ROLLBACK segments are not deallocated

Hi,
on 8i, Win 2003 the Roll back tablespace is not deallocated and enlarge since it is in Autoextend.
1-How can we see which query or application occupies RollBack segment ?
2-How to see why it is not deallocated ?
Many thanks before.

1 You need to look at v$transaction. V$session points to v$transaction by means of the column taddr.
2 extents of rollback segments are not allocated ever, by design. Deallocating an extent is costly, also it increases the chance you run into ora-1555.
IIRC 8i is desupported for quite some time, and not certified on Win2003.
Sybrand Bakker
Senior Oracle DBA

BDOC and Segment are not valid

Hi All,
We are facing an issue in the BDOC creation, We have a created a query BDOC (Mobile Application Modifiable ) in the CRM System, Activated it. Generated the Metadata in the Client console. We have used the same bdoc and segment for the document generation.
However In the Mobile client when the document is generated we are getting an error "BDOC and Segment are not valid" please let us know.

Hello
Could you please apply the notes 1161839 and 1164220 which has fixes for that issue.
After applying the fixes, register the dll Genservicewrapper.dll present in
<<Drive>>:\Program Files\Microsoft Visual Studio 8\Common7\IDE
After that, register UGM.dll preesnt in %mobilerootdir%\Bin.net folder.
Now open MAS and sync the BDOCs.
Best Regards
Shankar

I have 2 email addresses but they are not showing in the left hand column in TB, how do I rectify this problem?

I am hoping to transfer from Outlook Express to TB. On installing TB and importing from OE the 2 email address I have do not show as seperate accounts. The 2 are brian@IP address and shopping@IPaddress.
I use the 2 address for completely seperate reasons and would therefore like each account to have their own Inbox and the incoming emails to be downloaded in each inbox, as they currently are in OE.
How can I acheive this in TB?

Is the folder pane collapsed? View(or AppMenu/Options)/Layout/Folder Pane. Otherwise, deleting foldertree.json might fix it:
http://kb.mozillazine.org/Toolbar_or_windows_layout_not_working

CL_HTTP_CLIENT, Content-Length in multipart segment are not part of RFC 186

Hi, we are generating http multipart request using class CL_HTTP_CLIENT, and multipart segments header are filled with Content-Type and Content-Length, by default. Both elements are not part od RFC 1867, and request is not working.
We find a way to avoid Content-Type in note 582889 "delete Content-Type of HTTP request header", but we can find anything to avoid content-length.
POST /TransporteBienes/SeguridadCliente/presentarRemitos.do HTTP/1.1
Content-Type: multipart/form-data; boundary=ejjeeffe0
Content-Length:       759
accept-encoding:
--ejjeeffe0
Content-Length:        11
content-disposition: form-data; name="user"
30663288497
--ejjeeffe0
Content-Length:         6
content-disposition: form-data; name="password"
We need to avoid content-length:
POST /TransporteBienes/SeguridadCliente/presentarRemitos.do HTTP/1.1
Content-Type: multipart/form-data; boundary=ejjeeffe0
Content-Length:       759
accept-encoding:
--ejjeeffe0
content-disposition: form-data; name="user"
30663288497
--ejjeeffe0
content-disposition: form-data; name="password"
Is there any way to do that?
Regards.

Anybody?

HP Photosmart C4795 when printing addresses and return addresses on envolps are not lined up.

The return address or mailing address when printed on the envelop are not ligned up correctly on the envelop in the correct location. The Return Address is printed in the middle top of the envelop instead on the left upper corner, the Mailing address is printed to far to the right of he envelop.

x3,
Follow these directions and check these settings to print envelopes from Microsoft Word.
Click Tools , click Letters and Mailings , and then click Envelopes and Labels .
Type the Delivery and Return address information.
Click Options .
On the Envelope Options tab, set the following options:
Envelope size : Set the envelope size to match the loaded envelopes.
US only : Select Delivery point barcode to make it easier for mail sorting machinery to correctly route the envelope.
Return address : Set the Return Address position .8 inch in the From left section for Size 10 envelopes only.
Envelope Options tab
Click OK .
Select the Printing Options tab, and verify that the following settings are selected:
Select the Feed Method option that shows the envelope on the far right side with the short edge first.
Select Face down .
Examine the selected feed method image and verify that the envelope flap is on the left side of the envelope. If it is on the right, select or deselect Clockwise rotation .
Printing Options tab
Click OK , and then click Print
Let us know if it helps, Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I think somebody is hacking my visiting websites and ip address.Some sites are not opening.When I am trying to open mozilla 1 message box is being displayed stating that one firefox is being opened and not responding first close it & restart the system.

At present 2 websites are not opening. When I am trying to open these sites either "problem loading page or the website you are looking is not present". These two messages are being displayed.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Free goods price discount when free goods are not required by customer

Hi
In a promotional activity for purchase of 10 items 2 free goods (which are different) have been determined, which is exclusive.
The customer wishes not to take the free goods and asks for a discount equivalent to the value of free goods, please advise on steps to be undertaken in this scenario.

Why dont u use "Pricing For Inclusive Free Goods Without Item Generation"
To do this, you can use the standard condition type NRAB. It is set up as follows:
It does not determine the discount from the condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
Hope this helps & Rewrad if does
Rgds

Address DFF segments are not required.

Similar Messages

Maybe you are looking for