Address Field questions

We have a requrirement that is requesting we make the Lead "Billing Zip" required on any new leads entered, As the Billing Zip field is grouped into "Address", I cannot seem to get any of the Default validation or Field Validation rules I put into place to work.
Zip code is the identifier we use to auto-assign leads in CRM.
The issue is that if a user does not enter a zip code, the lead gets auto assigned to the default lead person listed under lead assignment rule group "Unassigned Lead Owner", and that user is getting swampped with leads where no zip code was provided.
Are the Address fields considered "System" Fields?
I am aware that system fields do not allow field validation, but in address, those validation options are not greyed out, suggesting I should be able to put field validation rules on them.
I tried [<ZipCode>] IS NOT NULL
[<ZipCode>] <> ''
I also tried creating a new "Lead Zip Code" field where we can force the user to populate the new field, and then put a Post Default Validation Rule on the billing address field that says [<ZipCode>] = [<stLead_Zip_Code>]. That does not auto-populate the Billing Zip field upon save either.
Any Suggestions, and/or can anyone confirm if the address fields are considered "System"...hence these attempts are a mood point?

Hi, I tried putting the post default in place by first making the new "Lead Zip Code" field required, and also have a validation rule set on the new field where "[<stLead_Zip_Code_ITAG>] IS NOT NULL"
I then went into the "Addrerss" field and added the post default = "[<ZipCode>] = [<stLead_Zip_Code_ITAG>]" Logged out, back in, and created a new lead. That did not work. The "Billing Zip" field is still blank when I create and save a new Lead.
Am i not using the correct criteria in my post default criteria?
We are currently a single country configuration, so that should not be an issue.
Edited by: TeknoMan on Mar 31, 2011 1:49 PM

Similar Messages

How to visit a pasted url in address field?

This may seem a naïve question:
Some background: I have never used Safari before. I have just installed *Safari 5.01* for Windows on my *Windows 7 PC*, and when I *+copy and paste+* an url for a particular existing web page into Safari's address field (which url loads successfully in Firefox, Opera, and IE ), I find I have no *go to* or load arrow, or other means, such as pressing enter or return, to make the browser load the pasted address. When I press Ctrl+L nothing happens, whether from the drop down menu at File: *Open Location...* or as a double keyboard command.
And so I resorted to importing a bookmark for the address from IE, and then Safari loaded it successfully.
Can I not just copy and paste addresses into Safari's address field and have a *+simple next step+* to load the page as I can with IE, Firefox, and Opera ?
I tried typing part of the address in manually for Safari's autocomplete to find it, but it wouldn't find the address, which is very new, but does exist, and as I have said, loads in the other three browsers with a simple paste and enter. This *+copy and paste+* method happens to be a very convenient means of loading some sites, with only one option being available, that is the exact address, rather than possibly several options that are offered up as one types part of the address, which have to be looked at and chosen from.
Any assistance will be appreciated.
Thanks … allaniam

*I confirm a similar bug exists on Safari 5.0.2 for Windows, running on a 32bit Windows XP SP3.*
Description
1. You copy an URL, not matter how you copy it (copy the URL text, or from another browser address bar, or from a webpage using the contextual menu "Copy Link", and etc)
2. When you try to paste in the Safari address:
===(i) if you use keyboard shortcut Control-V to paste in the URL, and press ENTER - everything is normal, meaning you will leave your previous webpage and go to the new page with that URL you pasted in using Control-V
===(ii) if you right click on the Safari address bar, invoke the contextual menu that popups from there, and choose "Paste" from the menu,and then hit ENTER after you paste in the new URL:
*======(A) the new URL you pasted in will disappear.*
*======(B) the old URL before your paste, will re-appear in the address bar.*
*======(C) the cumulative effect this operation will be the same that you reload the previous page.*
This is the symptoms on 32bit Windows.
*It seems in the current build of Safari for Win, "Paste" command from a menu denotes something different from its shortcut "CTRL-V".*
This is a very weird thing.
Just for the record, Safari 5.0.2 on Mac OSX 10.6.4 doesn't share the bug.
*By the way, I have also surveyed the exactly version and build numbers for both the Safari versions:*
Safari 5.0.2, build 7533.18.5: on WinXP 32bit
Safari 5.0.2, build 6533.18.5: on Snow Leopard.

How to make ship to address fields mandatroy while creating sales order

Dear forum Members,
My client oraganizes trade shows and hence ship to address vries everytime when sales order is entered for the same sold to party.So one times ship to customer is used in the sales order and address is entered at sales order level. Please note that at master data level all address fields are suppressed for one time customer.Hence there is no question of going back to one time customer account group and making any field mandatory.
While changing address for ship to at order level, there are few fields which are mandatory, for example city is mandatory. I also want to make zip code and region as mandatory.where is this controlled?Please note that this is not account which controls this. i have already done lot of r&d on account group and transaction variants which are not controlling these fields at sales order level.

Hi Kanwal,
Only incompletion procedure will not suffice for your requirement.
You need to make the field mandatory wherein, if you dont enter, system will not allow you for enterin further fields. For this you should do the following:
Goto transaction SHD0, you will get a screen where you need to enter you Tcode "VA01"
Below you define a transaction variant (starting with Z).
On the next tab you have Screen Variant. Here you enter screen variant name, program name & screen number.
Then you click on create.
Its like as if you are doing some kind of recording. Finally you will reach to the screen where there are options available to make the field mandatory.
For your reference the program is SAPMV45A screen number is 4001.
Further screen are self explinatory.
Hope this should solve your requirement
Regards,
Dhananjay

Address fields output only

Hi,
In our IC webclient, when we enter a business partner, if nothing is entered in the address fields it creates ok but when we come back to change the partner again, the address fields are output only, so we can't enter anything in them. If we do enter address details when we create the partner, they are available ok for changing at a later date.
Can anyone offer any advice on how we solve this ? I've taken a look at transaction BUCG. The fields in question are set to 'optional'.
thanks,
Malcolm.

anyone ?

Making IP Address field in JAVA - error

Hi All,
Can anyone tell me how to make the IP Address field as displayed in windows operating system network settings.
Actually I have made one IP field using JFormattedTextField and MaskFormatter class.
code is given below:
private MaskFormatter getMf2() {
          if (mf2 == null) {
               try {
                    mf2 = new MaskFormatter(" *** . *** . *** . *** ");
                    mf2.setValidCharacters(" 0123456789");
                    } catch (Exception e) {
                    JOptionPane.showMessageDialog(null, e.toString());
          return mf2;
     jTextField = new JFormattedTextField(getMf2());
Am I doing anything wrong here?
Problem is its not behaving in the way windows operating system IP field behaves?
Actually I am unable to display 3 dots(.) in the field which look like they are with regular space gap in the jformattedtextfield?
In windows OS, dots in the IP address field will remain static, but with my IP field, they are moving when I am adding values into the field? How to solve this problem?
I have given three spaces in the mask formatter initially? so if I click on the first place, I am unable to type at that place? how to rectify this problem?
Please anyone help me to solve this problem and make proper IP field as it looks in windows operating system. If Any code is available in the web, please provide the link here.

I have used monospaced font, now initially dots(.) are appearing in equal gaps in the textfield.
But the problem again is that, when I am typing something, those dots are moving right side to accomodate the entries I have made.
I have set font like this*jTextField.setFont(new Font("Serif",Font.PLAIN,16));*How can I move the character I have typed to the left, instead of dots moving to the right side as done in case of windows IP Address field?
And one more help required is, actually I am giving initially three spaces in MaskFormatter and setting that MaskFormatter to jTextField.
So if I click on initial place in the textfield, cursor was displayed there, but I am unable to type at that place as I have given three spaces in maskformatter class.
So my intention is that, even if I click at the start of textfield entrance, it cursor should be pointed or displayed after three spaces only.
How I can implement this?
Please try to answer these two questions.

Address Same as Above checkbox that will autopopulate 2nd address fields

LiveCycle ES2
Sure this easy question has came up before, but I cannot find the solution anywhere.
I am creating a form where the user would fill in their contact information. (address, phone, email, etc.)
Then they will need to fill in their return shipment address too. I would like to have a checkbox so when it is checked, it would autopopulate the return shipment address fields with the contact info field entries (copy), since these are usually the same data entries.
I can accomplish this in Acrobat Pro but for whatever reason my file size increases substantially when I add too much script. So I am going to give this a try and after seeing all the functionality included with LiveCycle, it's probably best I start learning.
Thanks for the help!
-CM

In the change event for the checkbox you could put something like (in formcalc):
if ($ == 1) then
shipping.address1 = postal.address1
shipping.address2 = postal.address2
etc..
else
shipping.address1 = ""
shipping.address2 = ""
etc...
endif
(obviously changing shipping.address1 to whatever your 1st shipping field is, etc)

Which e-mail sender address field is checked for restricted ePrint?

If I restrict ePrint to only accept print requests from certain e-mail addresses: Which e-mail address field of the incoming e-mail is checked?
a) E-mail message header From:?
b) E-mail message header Sender:?
c) SMTP MAIL FROM: (the sender address on the "SMTP envelope")?
Thanks

Hi Christob,
If you are selecting Allow Senders Only under ePrintcenter.com.
Then you have to put in the email address of the people who can send jobs to your printer via ePrint.
Example:- If your friend wants to send an email to your printer and you have selected allow senders only.
You will have to have his email address in there (the email address from which he is going to send an email) for him to send an ePrint Job to your printer.
I hope this answers your question, if you have any question please let us know.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

SMTP send failure doesn't indicate which address field has failed?

Hi,
I have question regarding Transport.send method. I try send a message (in which to one of the address is invalid e.g. BCC field). I get the exception SendFailedException. I catch the exception and try to send the message again to all ValidUnsentAddresses. But in the exception or in nested exception there is no way I know which address field has failed?
I can always compare the valid unsent addresses with addresses in message and can remove the invalid from the message but thought there must be some way to know it in exception it self?
Regards

Sorry, no, it doesn't tell you which field the address came from, because in fact the
address may not come from any field at all.
In the normal case the addresses from all fields are collected together and used as
the list of addresses to send the message to. But by using the appropriate sendMessage
method, you can send the message to any addresses you want, whether they appear in
the message or not.

Address field type

I have 2 questions.
1) I see Billing field for Leads is of type Address but when I create a new field, Address is not on the list of field type? Where is it?
2) How do I create a custom field type similar to that of the Address field type?
Thanks
I'm using version 18

At this time CRM On Demand does not have a address field type. The out of the box address fields consist of a "Address Block". You can use custom fields such as short text fields and picklist fields for address information.

Frame Address Fields

In a Frame Address Field, you get the destination and source MAC addresses. But does the frame address field in a frame structure also include source and destination IP addresses? (I am referring to layer 2 of the OSI model)

I suppose it would boil down to the phrasing of the question.
As Kamal mentioned, the L2 Frame contains an L3 packet, which DOES contain IP source/destination addresses.
If the question specifically asks about the frame header, then no, there's no IP info (other than the field that says that frame has an IP packet versus an IPX or DECNet packet)
If it asks whether a frame has / can contain IP address info ... well, yeah, it can.
Definately lame, but I'll bet many of us have seen questions this lame or lamer on the real tests.
Good Luck
Scott

How do I hide names from the Address fields?

here's the problem.
a group of peers is exchanging emails using the Reply All function. the catch? we need to keep our names out of the Address Fields. if I enter my friend's name into Address Book, Mail insists on showing the full name in the Address Field.
is there any way to insert only the email address without the name of the recipient in the Address Fields? even when selected from the Address Book, or entered via a Group selection?
BCC is not an option. De-selecting "When sending to a group, show all member addresses" is also not an option, because I would assume that recipients will not be able to Reply All.
I tried entering an alias into the Email field in Address book: Alias <[email protected]>.
any ideas?
cheers,
Gregory

you can uncheck the option to auto complete addresses in Mail preferences->composing. then you can enter the addresses by hand without full names. the addresses will still show of course. or you can create double vcards for people in question in address book that have just email addresses but no names. then Mail will let you choose those.

Address field data is not getting dispalyed in company details

Dear All,
After filling up the necessary details in the Administration->system initialization->company details->general tab->Local language for the address of the company.
I am not getting the address displayed in the Address field.
I have filled all details in street,block,building,city,zip code,state,country.
But still i am not getting anything displayed in the address field.
Kindly help me in resolving this issue.

Open Administration -> Setup -> Business Partners -> Address Formats Window.
Check if you have the address format for the Country available in this window

How to make the Shipping address field on an Account as a required field?

Hi,
The requirement is that there has to be a shipping address specified for each Account that is being created.
I tried to set the 'shipping' address field to 'required' in Account field setup, but the required checkbox is disabled, neither can I do it from Account Page layouts since there also its the same case.
Does anyone know if its possible to do this and how?
Regards,
Ani.

Have you tried to add validation to the AccountName field
[<PrimaryShipToStreetAddress>] IS NOT NULL - will test to see if there is a value in the Shipping Address 1 field

F4 help for address field

Hi,
In BP_CONT component, for address field I need to provide F4 help. And the F4 should contain the addresses with separate fields as (city.street,country).On selecting the row the data should flow as concatenated manner to the address field.
Please provide some idea to achieve this.
Thanks.

Hi Ginger,
I would like to add what Vinamra has said, you need to create a search help through se11 transaction. As per your requirement you need to map address field of the selected row to different fields in UI.
In search help we have IMPORTING(IMP) and EXPORTING(EXP) Fields or parameter.
Lets take a simple example, suppose you have three address field house no, street and city. Now you would like to apply F4 help on CITY field so you need to choose CITY field as IMPORTING and EXPORTING parameter in your search help and other fields like HOUSE NO and STREET as EXPORTING parameter only.
Now following code you need write in GET_V_CITY() method
DATA:
   lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
   ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
   lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.CITY'.
   ls_map-f4_attr      = 'CITY'.
   APPEND ls_map TO: lt_inmap, lt_outmap. " map to input and out
ls_map-context_attr = 'STRUCT.HOUSENO.     " Context node attribute
ls_map-f4_attr      = 'HOUSE_NO'.                    "corresponding Field in search help
APPEND ls_map TO: lt_outmap.
ls_map-context_attr = 'STRUCT.STREET.     " Context node attribute
ls_map-f4_attr      = 'STREET'.                     "corresponding Field in search help
APPEND ls_map TO: lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZSH_ADDRESS'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
May this will help you.
Regards
Ajay

I can no longer see the address field in safari, can anyone help?

I can no longer see the address field in safari, can anyone help?

Abarryseymour
That didn't work to get the safari address bar and the google search bar on my safari browser. could I have a virus???
Which OS, which Safari?

Address Field questions

Similar Messages

Maybe you are looking for