Address for contact person

hi all,
i have a req,
req says "system would need to block Customer Master Data irrespective of account group getting copied to the Contact Person home address and then to General Data tab"
i didnt understand it correctly.
how the data is copied into contact persons home address?
and to general data tab.
is there any program? standard? or it could be user defined?
thanks

Hi Sai,
Just check out the FM <b>'BAPI_BUPA_ADDRESS_ADD'</b>.
Regards,
Amit Mishra

Similar Messages

  • Campaign execution not send emails for contact persons

    Hi All!
    I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
    1.Start the campaign, and on the "campaign: Schedule job" screen, i choose  "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
    2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
    3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
    I'm working on the Webclient UI, of the CRM 7.0
    Does someone knows why the emails are not being sent also for the contact persons?
    Thanks in advance.
    Inê

    I have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
    In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
    NOTE: I am using Address Independent Communication Data of Business Partner
    Below is my sample code for contact person email :
      data: wa_bp_cp_channel type crmt_bp_cp_channel.
      field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
      types: begin of ty_cp,
              partner type but000-partner,
              address type but000-addrcomm,
             end of ty_cp,
             begin of ty_bpcp,
               partner1 type but051-partner1,
               partner2 type but051-partner2,
             end of ty_bpcp.
      data: it_cp type table of ty_cp,
            wa_cp type ty_cp.
      data: it_bpcp type table of ty_bpcp,
            wa_bpcp type ty_bpcp.
      data: it_bp type table of ty_cp,
            wa_bp type ty_cp.
      read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
      if sy-subrc = 0.
        select partner addrcomm
          from but000
            into table it_cp
              for all entries in ct_bp_cp_channel
                where
                  partner = ct_bp_cp_channel-cp_number.
        select partner1 partner2
          from but051
            into table it_bpcp
              for all entries in ct_bp_cp_channel
                where
                  partner1 = ct_bp_cp_channel-bp_number.
        if it_bpcp[] is not initial.
          select partner addrcomm
            from but000
              into table it_bp
                for all entries in it_bpcp
                  where
                    partner = it_bpcp-partner2.
        endif.
        sort it_cp by partner.
        sort it_bp by partner.
        sort it_bpcp by partner1.
        loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
          read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
          if sy-subrc = 0.
            <fs_bp_cp_channel>-addrnumber = wa_cp-address.
            clear <fs_bp_cp_channel>-bp_number.
            clear <fs_bp_cp_channel>-bp_guid.
          else.
            read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
            if sy-subrc = 0.
              read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
              if sy-subrc = 0.
                <fs_bp_cp_channel>-addrnumber = wa_bp-address.
                clear <fs_bp_cp_channel>-bp_number.
                clear <fs_bp_cp_channel>-bp_guid.
              endif.
            endif.
          endif.
        endloop.
      endif.

  • LSMW Vendor Create /Change (XK01/XK02) by IDOC CREAMS05 for CONTACT PERSON

    Hi Experts,
    Can you Please help me for CONTACT PERSON (create/ change) upload for vendor using the IDOC type CREMAS05.
    which structure is appropriate for CONTACT PERSON in CREMAS05
    Thanks in advance,
    Babumiya Mohammad

    okay, this screen is not active in my system. (are you doing retail?)
    if it is address data, then it is usually transmitted with the ADR3MAS idocs
    this is at least the case for customer contacts.
    Edited by: Jürgen L. on Feb 20, 2012 5:13 PM

  • 'No data found for contact person 00764' error on Cart

    Hiya.
    I am getting a message that pertains to 'No data found for contact person 00764' error on Cart. 00764 is the BP number.
    In SRM Org plan, the user check is fine.
    Please can you suggest.
    Thank you.
    Pooja Kaur
    p&g, India.

    Hi
    When are yo geting this error mesage ?
    Is he (BP) is a requestor or vendor? Give some more details on that BP since you said attributes are ok.
    regards
    Muthu

  • Number Range for Contact persons in SAP CRM

    Hi Experts,
    Can anyone brief me about the contact persons concept in CRM and ERP?
    How and where the the no. ranges are maintained , config settings, link between ERP and CRM?
    Standard Account group for contact persons in ERP and CRM?
    I would appreciate and points would be awarded .
    Best Regards
    Suchhi

    Contact persons can be maintained on both sides. In our case, we mantain contact persons mainly for needs of sales department, so we set master on CRM.
    How and where the the no. ranges are maintained , config settings, link between ERP and CRM?
    To define number ranges on crm side go to IMG>Cross-Application Components>SAP Business Partner>Business Partner> Basic Settings>Number Ranges and Groupings>Define Number Ranges
    For number range created you have to create grouping. This grouping has to be assigned manually or automatically when creating a business partner. The business partner gets a number from the number range that is assigned to the grouping.
    This can be defined under IMG>Cross-Application Components>SAP Business Partner >Business Partner>Basic Settings> Number Ranges and Groupings>Define Grouping and Assign Number Ranges
    For number range created inCRM system you have to define a corresponding number range in the ERP. This is necessary to ensure that business partners created in CRM system get the same ID when they are replicated to ERP.
    Go to IMG>Logistics>General >Business Partner>Customers>Control>Define and Assign Customer Number Ranges
    Next define account groups under IMG>Logistics>General>Business Partner>Customers>Control>Define Account Groups and Field Selection for Customer
    For each of CRM business partner classifications you have to define a mapping to an ERP account group. Run transaction code PIDE and do the mapping.
    And of course your middleware settings must also be in order.
    Standard Account group for contact persons in ERP and CRM?
    There are no predelivered account groups for contact persons.
    Regards.

  • No data found for contact person '2000000243'. Inform system administration

    Hi expert,
    i found error 'No data found for contact person '2000000243'. Inform system administration'.
    When check in program: HRALXSYNC, no error found.
    Thanks and Regards,
    Fariz

    Hi,
    You have to maintain contact person for the supplier, as an SRM admin the list of suppliers dispalyed select the vendor against which you want to create the contact and click on "Create Contact Person with reference" maintian all the required entires and you will be able to see this contact details in you RFx while selecting the bidders for RFx.
    with regards
    Manjunath

  • Simple report that extracts marketing attributes for contact persons

    HI
    I want to extract the marketing attributes for contact person and to have certian output fields ,
    Can anyone help by finding an existing report that i may make some changes in it.
    Thanks ,

    ..

  • Number range for contact person

    Hi all,
    I need the configuration settings to be done for creating number range for contact person. any help will be highly appreciated.
    Thanks
    Vikrant

    Hi vikrant vij 
    no need to maintain number range for contact person,u just add contact person in customer masterdata
    Thanks&Regards
    Venkat.Dhanemkula

  • Qualifications Profile for Contact Person-PT

    I have assigned qualification to Contact Person -- Object Type "PT-Contact Person" but in transaction PPPD, I am unable to display Qualifications Profile for the Object "PT-Contact Person", while I am able to display Qualifications profile for other objects such as "Person"
    Message reads as follows:
    Unable to display a profile for object "PT" -- Message no. PQ213
    I am wondering if I am supposed to change any settings in order to be able to display Qualifications for Object TYpe "PT-Contact Person" or do I have to use a different transaction for this object type

    Hi sap hr consultant
    As per my knowledge qualification profile is displayed only for the object type "P" not for contact person or user even the same problem we faced but according sap help also for contact person you cannot display the profile.  please delete that contact person hire him for the same positon and again you can assign him as a contact person and do the qualification profile.  As per my knowledge these contact person and user is addition or you can see it is supporting to person so try with the person only.
    bye
    naveen

  • Deactivate few Communication methods for Contact persons

    Hi Forum,
    I have a requirement wherein I will have to hide few commincation methods in Contact persons(BP category-Person).The communication methods as <b>Standard Comm.Method</b> for contact person viz.,RML(Remote Mail), SSF(Secure store & Forw.) etc need to hidden. I found no place where these values for communication methods are maintained in SPRO. Please guide how I can achieve this.
    Will Reward points for helpful answers
    Regards
    Shridhar

    Hi Forum,
    I could hide the field in sm30 in the table TSAC.Uncheck the field you dont want to be displayed in the column
    <b>Flag:Use</b>
    Regards
    Shridhar

  • How to findout Feeder Class for Contact person POWL

    Hi Experts,
      Can anyone tell me what is the Feeder class & how to find out Feeder class for Contact person POWL?
        Can anyone tell me how to find out Feeder class for any particular POWL views.
    Thanks & Regards
    Sandeep.

    Dear Sandeep
    you should consider the following transactions to obtain/configure POWL
    ===========================
    FPB_MAINTAIN_HIER
    Here you define you App. ID
    POWL_TYPE
    Here you define your TYPE and connections to Feeder Class
    POWL_TYPER
    Here you link App. ID + Type
    POWL_QUERY
    Here you define the Queries (views)
    POWL_QUERYR
    Here you link your Type + Query
    ===========================
    So for the Feeder Class you should check POWL_TYPE. But the transactions above are all interconnected.
    Kind Regards
    /Ricardo Quintas

  • Mapping table for contact person download from ECC and Groupware

    There are 3 connected system in our landscape:
    - CRM
    - Groupware (connected to CRM)
    - ECC
    We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
    1.  Contact created in Groupware, flows to CRM ->ECC
    2.  Contact created in ECC flows to CRM-> Groupware
    3.  Contact created in CRM flows to Groupware and ECC
    Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
    The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
    Can anyone please advise what are the mapping tables for the address update when the contact is created in :
    - Groupware/CRM
    - ECC
    Regards

    Hi Christophe,
    Thanks for the response.
    I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
    I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
    Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

  • Delivery address and contact person

    Hello,
    Running ECS SRM 5.0
    Business requirement is to have many delivery addresses pr. org unit (which is fine) and a contact person for each of these addresses. How can I enter a contact person on an address or link these?
    rgds
    GAR

    Hi
    This can be possible by SRM Web transaction - BBPMAININT (Edit Business Partners)...
    Have you used USERS_GEN transaction in SRM to create users ? Please read the SAP documentation in this case associated with the transaction using SRM GUI logon..
    Which option do you use in USERS_GEN : file upload ?
    In your case where the "US" (User) link is missing: is the SU01 user created ? Wasn't is already created before USERS_GEN ?
    If the system is not able to create the CP <-> US relation, you should get back an error message in USERS_GEN.
    Please go through the related very helpful pointers ->
    Central Person
    Re: Error while assigning user to a position
    Re: How to assign contact person user id to Vendor uploaded from ECC?
    Re: Central Person already exists
    Re: Correct relationships not being created from USERS_GEN
    Business Partner(BP) and Central Person(CP) distribution
    Contact person of vendors created inconsistently in my organizative structu
    Do let me know.
    Regards
    - Atul

  • Badi for contact person creation of isa user admin

    Hi fnds,
    I am creating a new custom field on isa user admin app of b2b. Now when i create a contact, the FM CRM_ISA_UA_IUSER_CREATE is been called. I am planning to pass this custom value to extension table of this FM.
    Now can u tell me a badi which triggers, so that i can use the extension table values and save it to the contact person details in the database?
    I am looking for a badi to save this custom value to contact person BP .
    thanks in advance,
    Niraja

    HI Niraja,
    Thanks for the useful information that itself has partially solved my querry, along with this I am in need of one more clarification from you and that is while creating user from ISA user management how can i modify it to add a standard user alias field, like u said I have created one custom field in ISA user mangement, can u please share it so that I can enhace the ISA user mangement to have one standard field(user alias).
    Thanks and Regards,
    Mayank
    Edited by: mayank Choudhary on Jul 10, 2009 2:09 PM

  • How do I choose a specific email address for a person in a group?

    I want to create a group in my address book. Several of the people in the group have 3 or more email addresses. How do I specify which email for a person is used when I send an email to the group?

    Create the group. Drag in the folks you want to include in the group. Right click on the group and choose "Edit Distribution List" and a window will pop up showing which addresses are selected in bold, and those that are not selected in plain text. Just click on the emails you want to use and it switches the selected address.

Maybe you are looking for

  • I have a IMac G5 A1058 that was running Mac OS 10.3.8 I upgraded to 10.4

    I have a IMac G5 A1058 that was running Mac OS 10.3.8 I upgraded to 10.4, shortly after upgrading the system would no longer boot so I booted from the 10.4 Tiger upgrade disk from which I had upgraded and disk utility found errors on the HD file syst

  • Huawei E220 strange issue running 10.6.2

    Hi, I'm testing the Huawei E220 with a brand new Macbook Air running 10.6.2. My provider is Vodafone IT. I have a very strange Issue: If I start the connection the Macbook Air suddenly shuts down a few seconds after the connection has been establishe

  • Editing applies to all copies of an image

    Hi, Had a quick look through topics, but I still need help! I notice that as soon a I make changes to an image, the change applies everywhere. Eg, I have put a B&W version of one image in a book, but want to have a coloured version of the same image

  • LDAP syntax of multiple values SSD in ldapclient command

    Hi, I need assistance with the syntax of multi-value SSDs in a ldapclient command. Any help or pointing to the right direction/documentation is very appreciated. I am trying to use the ldapclient command to manually configure a ldap client with multi

  • Clock stops on Pre 2

    A search reveals major issues with the internal clock in many Palm products but I cannot find any for the Pre 2 / WebOS 2.x. My problem is that every time I turn off the screen the clock stops. Network time on or off makes no difference. The clock wo