Address IT 0006 and time constraints

Hi all,
I am trying to understand the concept of address IT 0006 with relation to time constraints. Can you please provide your valueable inputs along with some examples. I understand the concept of time constraints but trying to get this concept in relation to IT 0006.
Thanks
Priyanka

As Sikander mentioned, you should have lots of threads on this already, but to your question what time constraint means to address really is identifying different address subtypes and how they exist within the lifetime of the employee.
For example, Subtype Permananet Address should exist only once for an employee from start to end. If any changes are made, the previous record should be end dated and a new record should begin with changes.
Same is the case with Mailing Address.
However there can be several Emergency Addresses for the employee at the same time.
So different time constraints for different subtypes control this behavior
Check Table: v_T582A for IT6, Time Costraint is T, which means u need to look at the V_T591A table

Similar Messages

Infotype 0185 Personal IDs and time constraint

Hi people,
Can you help me... is it possible to set different time constraint for different subtypes in infotype 0185 Personal ID's and where?
Thank you,
Romano

Hi guys,
thank you for your asnwer, I can see that in table V_T582A we can change time constraint for the whole infotype, but unfortunatelly I can't set different time constraint for different subtype in infotype 0185.
I want to manage that for subtype 01 i have time constraint 2 and for subtype 02 time constraint 03.
It is possible for example for infotype adress (0006) but i don't see where is it possible for infotype 0185.
Thank you.
Romano

Shortest path with more than one traveler and time constraints

Please have a look at this problem...Thank you..
(the problem is ok with one traveler. but when two or more come into the picture they really mess things up)
Here it is
I have a number of destinations that devides evenly up between a
number of travelers. (5 travelers with 20 destinations = 4
destinations each)
All destination can be visited by all travelers but it can ony be visited once
Each destination has to be visited and
each traveler has to visit the same amount of destinations.
The total amount of traveling has to be minimized.
Grid references have been given to work out the distance between each
destination. (the distances have not been worked out prior to the
start of the problem)
The starting point of each traveler is not at any of the destinations
and is different to each other. This point is also known and can be
used to calculate the distance to any destination.
there is an extra part of the problem (which I think I can sort out but if its of interest here it is any way): Each destination can only be
visited at a certain time of the day (ie between 7- 9 and 9-12 and
12-3 and 3-6)
A typical problem would have about 300 destinations and about 50
travelers every day. ie about 6 destination a day per traveler.
Could any one please give me an idea of how you would go about working the
routes out for each traveler that minimizes travelling distance as there is no algorithm that does this kind of routing.
I would really like some help with this one please. I have many ideas of how to do it but i really feel like it is not optimised...
I have to complete this in one week and have no AI experiance ( I would like to do this without AI or anything to do with ant colonies and or swarm optimization)
Thank you.

The reason that the time is in fact a simple constraint is because this is a homework problem and the kids only have a week to work on it. If it were a real world problem you you not conveniently have the number of travelers divide evenly into the number of cities.
If it were not some homework problem you would not have a constraint that reads "Oh by the way, for extra credit, you can only visit some cities at certain times during the day." It would either be a real constraint or not.
The other indication that it is a homework problem is that the student was given a week to do it. I will perhaps be going out on a limb here, but NO reasonable business gives some bozo one week to complete an assignment for which the bozo is so clueless that he has to hit the net and ask random people if they can tell him how to do it.
Had there been any need to model travel time, then velocity of travelers would have been mentioned at some point. If the traveler were actually doing anything in a city, time to load or unload the truck would have been given. And lastly, what real world problem would add a constraint that no two travelers could go to the same city. What if it is shorter to get from A to C by going through B which has already been visited. This constraint was the tip that the solution was a partition of a set of cities.
My gross simplification is merely that this is a homework problem and therfore if I haven't been told otherwise I am free to assume that a traveler moving at infinite velocity is perfectly OK. This means that my traveler waits at the door to a city until it opens, picks off that city and all other in zero time, until it bangs up against a city that opens at a later time, where it must again wait till opening time. The only thing that prevents him from completing his circuit is if an early city comes after a late city. A simple sort is all you need.
Lastly, even if you want to toss in a more complicated velocity model, it does little more than mildly complicate the sort comparison calculation so instead of making the comparison
boolean ICanMakeIt = city.openingTime <= city[i+1].openingTime
it becomes
boolean ICanMakeIt = city.exitTime +
Traveler[j].vel*dist(i,i+1) <= city[i+1].closingTime
I think you are mistaken in declaring this to be a difficult modeling problem

Time Constraint for Subtype

Dear All,
I have created Customer Infotype 9909 having Five Subtype. Now I have to give Time Constraint to each separate subtype. please guide for the same.
Regards
Mangesh

Dear All,
My created Infotype 9909 having Five Subtype like 1,2,3,4,5 and I have give Time Constraint i.e. 1,2,3 to each separate Subtype. Like same example you will find for Infotype 0006 of Address. For Infotype 0006 the Time Constraint is "T" but there is separate Time Constraint for each subtype of 0006. You will find it in Table T591A. I am sending the following values of Infotype 0006 with its Subtypes having Filed "ZEITB" which shows different Time Constraint for its Subtypes. So like that I want to maintain separate Time Constraint for each Subtype of created Infotype 9909.
MANDT     INFTY     SUBTY     ZEITB     OBJRQ     STEXT
800     6     1     1          Permanent residence
800     6     2     3          Temporary residence
800     6     3     2          Home address
800     6     4     2          Emergency address
800     6     5     2          Mailing address
800     6     6     2          Nursing address
So please let me know the solution.
Reagrds
Mangesh

Sales Office Master - Country, Region and Time Zone

Dear All,
In one of the Project, for some config-settings, I need to create Sales Offices. Here, Sales Offices is basically the Countries, to which business is happening.
For example,
Jordan
Mexico
Colombia
etc...
Now, while maintaining Sales Office records, System prompts for Sales Office Address. Initally, i maintained Country as per the Sales Office, for example:
For Sales Office Nepal, Country Nepal
For Sales Office Mexico, Country Mexico
etc...
Now, when i checked previously maintained entries in to System, I found that:
For Sales Office New Hampshire, Country India
For Sales Office California, Country India
etc...
When, I inquired about the same to concern Persons, within particular Organization, they are unable to explain, as these entries are maintained by Previous Implementation-Partner.
Can anyone explain, what entry needs to be maintained as Address - Country, Region and Time Zone, for International Offices? Is there particular logic for the same?
Best Reagrds,
Amit

Dear All,
Thanks for the Support, provided.
Let me explain, my scenario, in detail.
I am maintaining Profit Center, in Sales Order, based upon Substitution Rule.
For that, I have to maintain Profit Center, based upon Sales Area and Sales Office combination.
suppose, If my combination is:
1. if Sales Area is 10100107 and Sales Office is Colombia, then Profit center would be X
2. if Sales Area is 10100107 and Sales Office is Mongolia, then Profit center would be Y
Now, Important aspect is all Sales Organizations are maintained under Company Code ABC; and Company ABC is maintained under Country INDIA. Whereas, Sales Offices are both, Domestic, as well as International.
My queries are:
1. What effect has gone be made, if Sales Org is maintained under India and Sales Office, under some other country, in Sales Order?
2. Also, based upon Sales Office, System must pick the Transaction Currency, in Sales Order?
Best Regards,
Amit

Time Constraints - Hr ABAP

Hi Everyone
Can anybody throw some light on the various time constraints used in the HR-ABAP and their relation to the infotypes.
Also specify if their some Transaction code from where we can get to know about the value's of the time constraints.
And also if their's any Table associated with them.
<REMOVED BY MODERATOR>
Thanks & Regards
Gaurav
Edited by: Alvaro Tejada Galindo on Feb 22, 2008 10:24 AM

Hi,
Please refer to the document below:
When you update an infotype, old data is not lost but archived for historical evaluation. The system records a specific period of validity for each infotype, This enables the system to store more than one infotype record at the same time, even if their validity periods overlap. This means that the time relationships between infotype records must be defined. The concept of time constraints enables you to do this.
HR master data uses the following three time constraints:
Time Constraint 1
For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employees entry date and the start date of the first record.
Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
If a record is delimited because of time constraint 1, the system displays an appropriate message.
Time Constraint 2
No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
If a record is delimited because of time constraint 2, the system displays an appropriate message.
Time Constraint 3
Any number of valid records can exist at any one time. The individual records do not conflict with each other.
The system also contains the following time constraint indicators:
Time Constraint A
Infotypes with time constraint A must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
Infotype records with time constraint A cannot be deleted.
Time Constraint B
Infotypes with time constraint B must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
Infotype records with time constraint B can be deleted.
Time Constraint T
Infotype records with time constraint T depend on the subtype.
The principles of data entry and time constraints that apply to infotypes ensure that data is consistent and accurate. They also constitute the basis of time recording, payroll accounting, and reporting.
Thanks,
Sriram Ponna.

Time Constraint assignement to PD infotypes based on Subtypes.

Hello All,
Is there a way to assign Time contraint to PD infotype like 1005 based on Subtypes? If so how can we do this? I tried in table T591A but I guess this table is only for PA infotypes.
Thanks,
Chakri.

Hi,
Goto to sm30 and give T777I. There choose your infotype and click the time constraint. You can give the subtype and time constraint.
Balaji

Entry screen for Time constraint class

Hi All,
What should be the "Entry screen and Time constraint class" in Determine Entry screen number for Time constraint class.
Please do help me.
Regards
Jagadeesh Reddy

Hai..
It depends on the requirement...
The following screens are currently available:
Absences: - 2000 Absences (general)   - 2001 Quota deduction
- Attendances:   - 2050 Quota deduction   - 2051 No quota deduction
And abt Time constraint ..
A: The old record is delimited.
E: It is not possible to create a new record.
W: It is possible to create a new record, but the old record
     remains unchanged.
N: As for indicator W, but no display.
Time Constraint Class is basically how u want the system to treat when u try to create a new record during a period where a record already exists..
Ram Manohar

Change Time Constraint

Hi All,
What will be the effect on data if we change the time constraint from 3 to 2.

Infotypes or subtypes with time constraint 2 can only have at most one record for a given time period there can be gaps between periods if record over lap the system adapts the previous record accordingly by deleting ,dividing,or delimiting
Example of an infotype with tome constratint 2 is the subtype spouse (1) in infotype family\related person
this is regarding infotype 2
And time constraint 3 will have gaps between records or over lapping records
Edited by: Sikindar on Mar 18, 2008 12:18 PM

Change time constraint of Infotype 0006 subtype 1 and subtype 2

Hi
Can anyone tell me how to change the TC of infotype 0006 subtype 1 and subtype 2.
Currently I tried to change the TC in table V_T582A but its giving me an error : "Text maintenance not permitted as infotype part of Data Sharing (T582G) "
Can anyone please advise.
Currently the TC is T
I want to change it to 2.

hi ,
you can use SE38 to create a report like :
to change the time constraint for IT0006 +subty 1 + 2
REPORT ZTEST.
tables: t591a.
data: wt_tc type table of t591a.
select * from t591a into table wt_tc where infty = '0006' AND
( subty = '1' OR
subty = '2').
if sy-subrc = 0.
loop at wt_tc into t591a.
t591a-zeitb = 'x'. "new TC that you need
modify table t591a from t591a.
endloop.
endif.
regards

Time Constraints and Boundary Events in BPM

Hi all,
I have done the following:
In the Task window, Time Constraints tab
- Checked "Define a default completion deadline" with the offset as 3 minutes.
- Checked the "Raise critical exception when deadline is reached" checkbox.
In the boundary events for the activity, I have added "CompletionDeadlineIsCriticalException".
From the boundary event, I have linked to to another activity that belongs to another user (User B).
When i am testing the BPM, the task goes into a Suspended status after 3 minutes. However User B did not received a new item in the UWL.
In the NWA, "Manage Process: Process Instances", i can see that Task is escalated by null and the status is suspended.
Does anyone has any advice over here?
Thank you.

Hi,
i have checked the BPEM-CORE version as instructed.
It says 1000.7.11.2.0.20090321233900
Does that means I need to update to the latest patch?
Please also check the version of your NWDI build plug-in BPEM-BUILDT in the respective NWDI track. This is used to build Process Composer DCs in your NWDI.
I am in the Development Infrastructure Perspective in NWDS
How do i check the version number for BPEM-BUILDT in the NWDI?
Thank you.

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

If you are using Address Book, open it, create a new Group, select all you contacts by click the top one while holding down the shift key and then select the last one. Drag the contacts to the group, then send an e-mail to the group.

Time Constraints on ESS - Record Working Time and Leave Request

Hi All,
I have configured Time Constraints and their reaction in V_T554Y.
When I record the appropriate combination of Attendances and Absences in back-end, I can see the reactions as specified... However, when I try to do the same in ESS - Recording Working Time and Leave Request, I do not see that Time Constraints taking effect on the front end.
Here is what I have done:
I have two attendance - P001 and P002. P001 is configured to be recorded on Leave Request where as P002 is configured to be recorded via Record Working Time (CATS) link.
I record the attendance P001 in Leave Request and also post that into infotypes. After this, I try to record P002 in the Record Working Time Screen and I still get errors (Errors are from: HRTIM00REC E/207 and LR E/335)
If I try to replicate the same in the back-end in IT20002, then there is no issues.
Can anyone help and let me know how we can implement the same Time constraints reactions on the front-end and the back-end.
Thanks a bunch
- Harshal

Note that Time constraints are not valid for Leave request and Working time ie in ESS
it only comes via PA30
in CATS too, we dont follow much HR related collisions checks these are taken into consideration during CAT6
and in leave request via Rptarqpost
so its not gonna work, Its intended and correct! go for a user exit cats0003 or check cac1 profile customisation

Time Constraints for objects and relationships

Hi,
How to set up time constraints for objects and relationships under Org Management?
Thanks in advance.

Hi,
If you need time constraint for subtype A002 then you have to define it over here.
Usually for all standard objects this table gets populated by SAP. But in case you want something which is not there in this table and is as per the client requirement, you can create.
regards
guds

Address IT 0006 and time constraints

Similar Messages

Maybe you are looking for