Address labels with BOTH company and name?

I was hoping with Snow Leopard, that Mail would allow one to print address labels with BOTH the company and the name of the recipient.
I can only seem to print one or the other... but not both.
Is is possible to print an address label with both?
This would be a label with 4 lines... doesn't seem like rocket science to do this? What am I missing?
I can do this with Pearlabelizer. But I've tried everything in Mail to no avail.
Even when I print a PDF of a mail list, I can't have both the Company and the Name together. This is very frustrating.
Thanks for any tips...
jn

I see there's a workaround, if you don't have the Company name checked.
I wonder now if there's any way to uncheck the 'company' box from 450 addresses all at once? Or does one do those sorts of things one at a time?
Thanks for any tips!
:0)
jn

Similar Messages

  • Display both company AND name in contacts, incoming calls, messages, etc

    Is there no way to have both a person's full name, AND company appear on the display of contacts and incoming calls??
    I have over 2,000 contacts in my address book, many from the same company, and many with the same (or similar) names.
    When someone with a very common name calls or texts, it's impossible for me to remember who they are without listing their company as well. If I have both Sam Michaels and Samantha Mitchells in my address book, sometimes the only way to distinguish between the two is knowing that Sam works for Viacom and Samantha works for Universal.
    I've heard that the only way to do this is to include the company name in the person's main "name" field. This is problematic because A) it would take me a million years to go through and personally edit all of my 2k+ contacts, and B) this is completely counter-intuitive of having the company/office/job title lines available as fields in the address book in the first place. 
    Does anyone know a way around this at all?? Apple really needs to find a way to fix this, as it's super inconvenient for business professionals. This is just another one of my many frustrations with Apple products being not intuitive for workers in the corporate world.

    I'm not aware of a way to do this, however I'm certain that when my phone rings, it shows the person's name and company information that I have written in contacts. I've not taken time to check lately, but that seems to be the case for contacts that have a company name in them. Ones that do not have a company name show the person's name and then the label for the phone number they are using, such as home, work, mobile, etc.
    Otherwise, feedback to Apple goes HERE, and then just click on the appropriate subject.

  • I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Importing CD to Artist folder\Album folder\file with track number and name:

    I have a problem then importing my cd’s to my harddisk using iTunes.
    On my previous pc I got what I want, Artist folder, Album folder and file with track number and name:
    e.g.
    D:\My Music\B.B. King\Blues On The Bayou\01 Blues Boys Tune.mp3
    D:\My Music\B.B. King\Blues On The Bayou\02 Bad Case Of Love.mp3
    D:\My Music\B.B. King\Blues On The Bayou\03 I'll Survive.mp3
    But now I get:
    D:\My Music\Compilations\Blues On The Bayou\01 Blues Boys Tune.mp3
    D:\My Music\ Compilations \02 Bad Case Of Love.mp3
    D:\My Music\ Compilations \03 I'll Survive.mp3
    In iTunes my settings are Edit -> Preferences -> Advanced: iTunes Music folder: D:\My Music and checkmark in both: “Keep iTunes Music folder organized” and “Copy files to iTunes Music folder when adding to library”.
    My version of iTunes is 8.0.1.11
    Thanks in advance
    Peter

    It will depend on the album. Gracenote considers anthologies, a collection of tracks by the same artist taken from different albums, as a compilation. In iTunes the compliation setting should really only be applied to a collection of tracks by different artists.
    tt2

  • Sending emails with both body and attachment to multiple recipients

    I have a requirement to send email with body and attachment to multiple recipients.
    Body of the email is a standard text. It is a proxy-to-mail scenario.
    Here is what I've done: (I'm using PI 7.11)
    One mapping from Source to Target structure (format of the attachment text file)
    Second mapping from Target Structure to Mail Package format.
    In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
    "XIPAYLOAD" is the message protocol used.
    The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
    How to send an email with both content and text?
    The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
    Thanks for any input you can provide!
    Edited by: crazylad on Jan 18, 2012 3:39 PM

    Thank you for your response Mikael.
    For the first question, I was able to find the solution in the following blog:
    XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
    (I just needed to search with the right set of key words )
    The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
    Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

  • Cisco ISE with both internal and External RADIUS Server

    Hi
    I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
    I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
    So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
    I will like to know if it is possible to configure it and how I can do it ?
    Thanks in advance for your help
    Regards
    Blaise

    Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
    Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
    The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

  • How to display axis labels on both x and y-axis of a column chart

    hi,
     i have an urgent requirement of having axis labels on both x and y axis
    In x-axis i got it by sorting order also but in y-axis i'm unable to do
    i need in y-axis ,my column values are L1,L2,L3,----L10these shuold display in y-axis in sorting order and 0 in axis should remain as it is ..........how to take the interval ....? as of now i'm using Auto
    my y-axis values shud look like 0,L1,L2,L3,L4,----L10can anyone get perfect solution
    thanx in advance
    lucky

    Hi Lucky,
    Per my understanding that you want to display the values(Column1) like  "L1,L2,L3....L10" which comes from the "Series group" in the Y-Axis label and keep the row group in "Category group" to
    display in the x-axis and Numric column(1,2,3,4) in the "Value", right?
    Gernerally the lable display in the y-axis is automatically based on the value of the Numric column in the "Value" and it default is numbric labels.
    I have tested on my local environment and in your scenario, i suggest to hide the axis lable of the y-axis and create an tablix to only show the one column contains the values (L1,L2,L3,L3) to display in the place of the hidden y-axis label.
    Detais information about to design an new y-axis label ae below for your reference:
    Create an tablix to display only the row group of the "Column1" ( for the
    Column1 may have duplicate values, you can create parent row group for this column and hide the detail column by setting the "Column Visibility").
    Right click the y-axis to select the "Vertical Axis Properties" and select the "Labels" on the left pane to check the "Hide Axis labels"
    Select the Chart Area and in the properties set value of left=0 under the CustomPosition:
    Set the border style=None for both the Chart and Column1's row group
    Drag the tablix at the position near the hidden y-axis and set the size of both the chart and the tablix to make the value in the tablix row group(Column1) to be align with the y-axis label:
    Right click the "Chart legend" to delete or hide the legend
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Investigate book with both landscape and portrait pages

    I've an old book where I sucessfully swapped landscape and portrait pages, but there are complications why I cannot use it as a model for my current project. Since I no longer remember how I accomplished this, I have to investigate how to build a book with both landscape and portrait pages.
    I know about paragraph tags set to use a new page. Also a table on Reference page which lists Paragraph Tag Name, Right-Handed Master Page, Left-Handed Master Page, Range Indicator.
    But this doesn't seem to be enough; something is not working.
    Could you please point me toward resources which discuss how to do this?
    Thank you kindly,
    Theresa

    I think there was a big discussion of this already either here on the forum or over at the Frameusers.com list (I forget which). Try googling -

  • External hard drive use with both Mac and Windows

    I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

    Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
    (9844)

  • In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?

    In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?  It is not very clear on the home page.  It shows both and mentions both, but doesn't specifically say BOTH come with the monthly $9.99/month plan.  Can somebody clarify?

    Special Photography Plan
    http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html

  • Form report with both edit and column link

    hi experts,
    How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
    Regars,
    KK

    hi,
    Here i have achieved this by making the column link and page navigation.

  • When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

    When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?

    What you say about Send Later timestamp is correct.
    When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
    Please voice your vote at this link:
    https://bugzilla.mozilla.org/show_bug.cgi?id=560901
    You will need to logon/register.

  • How can I hook up an epson scanner (2480/2580) via USB/Firewire hub- APEBS and be able to operate the scanner with both laptop and desktop computer?

    My Artisan50 works in this configuration currently!

    You can't scan to a device connected to the base station's USB port. Devices other than computers with both USB and FireWire ports don't provide any crossover between the technologies unless specifically noted in their description.
    (58440)

  • I have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

    i have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

    thank you roger. i have attempted to connect my mbp now 3 times (all different ways with different cables purchased) but unfortunately no success. i understand that with me having an older mbp it can be a challenge. i have found this page http://www.wikihow.com/Connect-a-Macbook-to-a-TV but with my unsuccessful history, i have become skeptical. i will try your suggestion and let you know. thank you again.

Maybe you are looking for