Address Lookup

Can RIM add the capability for Messages to lookup addresses not only in my local Contacts but in my Corporate Exchange directory as well as my BlackBerry Tour 9630 currently does? Thank you!

Hello,
The Lookup function is standard in BES. If it is not working on a BES activated BB, then you need to talk to the BES admins to figure out why.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Address Lookup in External LDAP

I did changes in my $OH/j2ee/OC4J_UM/config/oc4j.properties file in order to Lookup in a external LDAP:
toolkit.ldap.dir.1.label=Contacts
toolkit.ldap.dir.1.url=ldap://OtherLinuxHost.mydomain.com:389
toolkit.ldap.dir.1.searchbase=ou=Contacts,dc=mydomain,dc=com
toolkit.ldap.dir.1.filter=objectClass=inetOrgPerson
toolkit.ldap.dir.1.attribute.mail=mail
toolkit.ldap.dir.1.attribute.lname=sn
toolkit.ldap.dir.1.attribute.fname=givenName
toolkit.ldap.dir.1.attribute.alias=uid
In my Collaboration Suite - Messages when I am creating
New Message, click in Blue Torch,
Select from list the "Contactss" directory
Select "Email Address" "contains" * => Go
UM shows the contacts from the External Ldap, but when I try to bcc, or cc or to, it is not updating my destination fileds (bcc/ cc/ to). But if instead of select the List "Contacts" I select the Internal Directory (OID) it works fine?
Which argument I miss ? or how I configure UM for export the email address from the AddrLookup Window to the Message_compose Window in the destination fields (bcc or cc or to) ?
Thanks alot for any help.

It is happening to us as well, we have OCS release 2 9.0.4.2 on Linux trying to access an external OpenLDAP linux server for shared contacts.
After we get the results of the search on the external LDAP, no button works on the Address Lookup window except "Close". It doesn't matter is we select the "Corporate Book" or other Oracle internal address books; we have to close the window and open it again to do a new search.
Are you seeing the same behavior?
I will have a phone conference today (5/11/05) with Oracle support to talk about this issue, we have had a TAR open for about 20 days now.
I'll keep you posted with the results.

Specific Destination Address Lookup?

Now on a dedicated GPS device, you can enter an exact destination address, and the GPS device can find it, quickly, and create a route to your destination.
Does Nokia Ovi Maps support direct address lookup on the phone? I have not been able to get it to work.
Now you can locate an address on the phone by finding it on the map, save it to favorites, but this is tedious and time consuming, to get the street number right.
You can also enter the address online to Ovi Maps, and sync the location to the phone into your Favorites. This works well too.   Now you have your precise destination.
Am I missing something or is this a limitation with respect to the downloaded maps to the phone?
To have precise address to GPS coordinates on the phone offline to all known addresses would make the maps too large.
This is using the phone offline. For example, doing route planning, inside your house with no GPS or network connection.
The second case is you have your current GPS position known to the phone, since you are outside, yet the phone cannot determine your specific destination, when you enter it. In this case, you only have a GPS satellite connection, nothing else.   I cannot enter a destination here either.
My belief is you must be "online", either WiFi or with a phone data plan, to get specific destinations.   Is this belief correct?

Biff27 wrote:Does Nokia Ovi Maps support direct address lookup on the phone?
To have precise address to GPS coordinates on the phone offline to all known addresses would make the maps too large.
My belief is you must be "online", either WiFi or with a phone data plan, to get specific destinations.   Is this belief correct?
Hi Biff27
The answer appears to be that it is regional variation whether or not you can navigate "Offline" to a specific address. Using v3.04 with UK maps downloaded there is no problem but talking here about small surface area compared with other countries. At one point I had world maps downloaded together with all "ClientIndex" so it certainly wasn't absence of available data to blame but no comparison to that on remote server.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Address Lookup option has disappeared

hi all,
my company recently moved to google mail and i am using a BB with curve 9300. all seems to be working fine except for 2 things.
firstly when i go to compose an email on my BB and look for a company name in the address book i no long have the address lookup function. i am sure it was there when i first set up my BB with our company gmail domain.
secondly 2 way sync seems to be working fine except for when i delete a message on the BB i get the option to delete on handheld and on mailbox and select that. except it never does. i have recived the message over and over from the server. i have changed the settings so on conflicts handheld wins and still the message wont delete on the server. the sync works fine for sent items on BB calender and for read items. just wont delete.
any help would be much appreciated. have been trawling the internet for help but not found anything yet.
thanks in advance
g

Hi gjrc,
The address lookup feature is only available when using a BlackBerry Enterprise Server. If your company has switched to GMail for their mail service, they would not be using BlackBerry Enterprise Server anymore.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Address Lookup from Postcode

Can anybody recommend or show me an example of a Address lookup using Apex? (Thats also Free?)
Cheers Stars!

Spam wrote:
Can anybody recommend or show me an example of a Address lookup using Apex?In what territories? Assuming UK from "postcode" and the location in your profile.
From the purely technical point of view I can't, other than provide a general pointer in the direction of web services...
(Thats also Free?)...however whatever technical solutions exist, they are doomed on this critieria. UK postcode data is owned by the Royal Mail and must be properly licensed: the last project I worked on with this feature [non-APEX] had a feature to count the number of postcode searches performed so that the appropriate royalties could be calculated and paid. Given the state of Royal Mail's finances I doubt that this has changed since then, or is likely to in the foreseeable future.

ICal address lookup

I have noticed a bug in the address lookup in iCal, it never seems to find the same addresses as it does in the native maps app which renders this function useless.
I was wondering if anyone else has found this issue or a fix.
When iCal is searching for the address the most popular are not showing according to my local area. Also it displays missing suburb names and won't select address.
Also is this able to translate to ios7? I can't seem to get the travel times on my iPhone, with iCal on ios7 again would be great as I take my phone with me not my desktop. Just a suggestion

Ditto. If I paste in a complete address, the map function does not work. But if I slowly type the address, giving time for maps to search after each keystroke, *sometimes* I am presented with the correct address to select.
Why can't it simply map whatever address is input? Very odd.

How to fix "Email address lookup" failure

Here is a weird one...
I have created a new nickname object which has three email addresses.
They all list OK under "View Email Addresses"
However when testing, GWIA reported "no such user". !!
After double checking the "View Email Addresses" screen for typo's, I did a Tools | Utilities | Email Address Lookup and it fails on the address, but the other two addresses for this nickname object are found OK.
So I deleted the nickname object and recreated it, but it still the 3rd email address can't be found.
Does anyone know why this is the case? Or better yet how to fix this?
Cheers, Gordon

Uwe,
I have synchonised the user object, and strange thing is that the nickname addresses actually appear in the user object under the "View Email Addresses" list, in the "Nickname Email Addresses" section. So the user object looks correct.
I guess that when the Email Address Lookup utility searches as does GWIA, it accesses an address list and not by actually looking at each individual user object's address list. So I just have to figure out why just one of the three nickname email addresses are not making it to this "Email Address Lookup" list.
I might look into doing a PO rebuild, unless there are any other less drastic ideas.
Gordon

"no match" in address lookup

Thanks in advance for the help. I was on an Enterprise Server at my former employer prior to loosing my job. They took me off but since then have had this problem with address book. I can find them by scrolling all 600+ but not easily. Also won't do lookup for email addresses either. Thanks, Phiphirn
Solved!
Go to Solution.

The 'Lookup' feature can only be used if the device is connected to the Enterprise Server, and it's used only for looking up addresses for people that do not exist in your device's Address Book.
When you go into your devices Address Book, you should be able to just start typing a first or last name and device should start to filter the addresses based on what you're type. So if you type J then O then H, it should find any names that have JOH in them (John Smith, Mike Johnson, etc).
If you find a post here helpful, please consider giving the poster some Kudos

Address 'lookup' and 'more / more all' very slow

I use an AT&T version BB 8820, and have had it now for three weeks. It syncs up with a Lotus Notes-based address book. When using the 'lookup' feature in the address book, it was retrieving addresses within three seconds during the first two weeks of ownership. But, it started retrieving addresses versy sluggishly over the last week, sometimes taking ten minutes or more to obtain an enterprise email address. At the same time, the 'more / more all' feature to retrieve truncated messages also slowed down, also from weconds to minutes. And the 'receiving more' message appears minutes after being launched.
My comapn's administrative support team as moved me to three different servers, coupled with two successive 'wipes' and enterprise activations. The problem still recurrs several hours after the rebuild.
I seem to be the only user struggling with this in my company. Do you have any idea what would be causing this?
Thanks in advance....
Herb B

Ok, it seems you have already covered the basics. I am wondering about the wireless portion of this setup. The 8820 is wireless. Is it possible that you can shut off the wireless to see if there is any change in the performance of the phone? Yes, this is a reach but since you seem to not have any 3rd party apps that are not running, I would think that the performance issue is either these apps are still open robbing you of memory and you think they are closed but they are not. You can view what apps are running at any given time by pressing the menu button from the home screen and selecting "Switch Application." You'll see all the open apps. There are 5 basic ones that always run and can't be shut down: BBMessenger, Home Screen, Mail, Phone and Browser.
If you are not using these apps, then unload them for a short time to see if they make any difference. Yes, I saw you had mentioned this in the first post and confirmed some slowness prior to loading the apps, but to trouble shoot the issue, you can eliminate these apps as a potential issue testing this way. You can always install them later.
Moving away from the apps issue, the other option is to reload the OS and tweek the memory. There are primers on the forums and how to's. One easy one is to remove any extra languages on the d... This can be done on the Desktop Manager.
Lastly, you may have a defective phone if the OS load does not remedy the symptom...
H.
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

IP address lookup and Sockets

Hi All,
I have created a Socket using java.net.Socket(String host, int port) by passing the required host, port parameters.
The host string is specified in the form of xxx.xxx.xxx.xxx, even though the Java
program(client) is running on the same machine where the server socket is listening, (IP address is not specified as 'loopback address' localhost/127.0.0.1).
Below are my queries for the above mentioned scenario.
1) When the data is sent/received to/from the Socket, will the data
travel across the network and return back to the same machine or it will be a direct send/receive within the same machine?
2) Is the loopback address 'localhost/127.0.0.1' used internally by the underlying socket implementation without performing lookup of the IP address in the network?
3) Does this behavior varies/depends on the underlying OS or the network
protocol/configuration?
Thanks in advance,
Sreenivasulu

1: it depends upon the mechanism through which the sockets between client and server are established (in ur case the client and the server is the same machine). When u specify the localhost/127.0.0.1, port where the server is listening, then i think the request should go out to the network and the OS will handle it by it self and manage the connection then the data will not travel through the whole network. Other wise when u specify that the server is listening on 192.168.0.0:9000 then the OS will go to look up server /dns it will tell him where this system in laying on the network is it in he same netwrok or out side this network and then a connection is established now the data will travel through the network, cause it will look for the system 192.168.0.0.
2: when u will use the loopback for specific IP then the direct connection is made to the system.
3: i can say nothing about this issus how the other OS are behaving cause i had mostly worked on Windows NT/2000
i am in the learning process. If i am wrong plz correct me. And i am also very much interested for the replies from other users...
thanx

Slow address lookup when writing emails

When I begin a new email, and begin to type in the name or email address of the person I'm writing to, the lookup/auto-populate is painfully slow. Its so slow in fact, that I can usually type out the entire address before it returns the suggestion list.
I know it used to be faster, but I don't remember when it got this bad. I've looked all over the forums and Google, but can't seem to find anyone else that has this issue.
I have two email accounts on the iPhone- Exchange &MobileMess. I don't populate anything from iTunes.

rlevs wrote:
I have two email accounts on the iPhone- Exchange &MobileMess. I don't populate anything from iTunes.
Okay, but have you ever plugged the phone into iTunes and synced it ?
I ask as a common cause of problems is an overabundance of the memory type "Other" which occurs due to bad data etc building up over time. Normally I would say to plug it into iTunes and see how much the Device has in the Other category and seeing whether it needs a restart.
But if its never been synced before I would be wary of advising this.

Address lookup (painfully) slow in Calendar (Mavericks)- can I disable it?

This new features seams really neat, but in reality it takes so long to find an address that I can barely type something into the event location field. As I start typing it starst hunting, and… I… have… to… wait… to… type… the… next… letter.
I don't really need this feature anyway since I use Mynd on the iPhone and that finds addresses just fine.
Short of speeding this up incredibly, is there a way to disable this?
-Joseph

4 1/2 month old thread. May pay to start a new thread outlining your Exact issues and any measures you have taken so far to resolve your issue.
Pete

Mail address lookup in shared hosting with multiple address lists setup

Hi, we have an Exchange 2013 environment for hosting purposes.
One client uses two seperate company names (and domain names). These companies are seperated in Exchange and use seperate address lists. This client uses mail between the two domains.
Let's say the domains are yin.com and yang.com. The users use Outlook Webmail and the Mac OSX builtin mailclient
The problem is that when [email protected] sends email to [email protected], Bob is able to receieve the mail, but the email-address from Kevin is not included in the mail. It is just listed as Kevin, without any property.
When Bob replies to the message from the OSX Mail client, it apparently tries to make up an address and generates something to the effect of this:
Kevin </o=Hosting Company/ou=Exchange Administrative Group /cn=Recipients/cn=*longnumber*>
This address is not correct and when sent, the email is bounced back with a NDR-report.
When Bob replies to the message from OWA, the address is simply the name with no email-address. This also results in an NDR report.
What can we do to make OWA or Mac mail keep the correct emailaddresses?

Hi Nithyanandham,
1. The cached addresses were removed, had no effect.
2. Typing the address manually ([email protected]) works.
3. Sending mail to an additional smtp address also works.
4. Originally Kevin has one smtp address on his mailbox. There are no errors in them.
5. This happens for all users who are sending mail between these two companies/address lists.
6. Output of this command is as follows (replaced usersnames and domainnames to protect the innocent)
[PS] C:\Windows\system32>get-mailbox -identity "Kevin"|fl
RunspaceId : 2407ca9f-7e5a-466e-9230-d55c8e804380
Database : MailBoxDB001
Location :
UseDatabaseRetentionDefaults : True
RetainDeletedItemsUntilBackup : False
DeliverToMailboxAndForward : False
IsExcludedFromServingHierarchy : False
LitigationHoldEnabled : False
SingleItemRecoveryEnabled : False
RetentionHoldEnabled : False
EndDateForRetentionHold :
StartDateForRetentionHold :
RetentionComment :
RetentionUrl :
LitigationHoldDate :
LitigationHoldOwner :
LitigationHoldDuration : Unlimited
ManagedFolderMailboxPolicy :
RetentionPolicy :
AddressBookPolicy : yin_ABP
CalendarRepairDisabled : False
ExchangeGuid : 23d17a76-cc3d-40db-ada7-5d72aa14384a
MailboxContainerGuid :
AggregatedMailboxGuids : {}
ExchangeSecurityDescriptor : System.Security.AccessControl.RawSecurityDescriptor
ExchangeUserAccountControl : None
AdminDisplayVersion : Version 15.0 (Build 847.32)
MessageTrackingReadStatusEnabled : True
ExternalOofOptions : External
ForwardingAddress :
ForwardingSmtpAddress :
RetainDeletedItemsFor : 14.00:00:00
IsMailboxEnabled : True
Languages : {nl-NL}
OfflineAddressBook :
ProhibitSendQuota : Unlimited
ProhibitSendReceiveQuota : Unlimited
RecoverableItemsQuota : 30 GB (32,212,254,720 bytes)
RecoverableItemsWarningQuota : 20 GB (21,474,836,480 bytes)
CalendarLoggingQuota : 6 GB (6,442,450,944 bytes)
DowngradeHighPriorityMessagesEnabled : False
ProtocolSettings : {MAPI§1§§§§§§§, IMAP4§1§§§§§§§§§§§§, HTTP§1§1§§§§§§, OWA§1, POP3§1§§§§§§§§§§§§
RecipientLimits : Unlimited
ImListMigrationCompleted : False
IsResource : False
IsLinked : False
IsShared : False
IsRootPublicFolderMailbox : False
LinkedMasterAccount :
ResetPasswordOnNextLogon : False
ResourceCapacity :
ResourceCustom : {}
ResourceType :
RoomMailboxAccountEnabled :
SamAccountName : YIN-KBN
SCLDeleteThreshold :
SCLDeleteEnabled :
SCLRejectThreshold :
SCLRejectEnabled :
SCLQuarantineThreshold :
SCLQuarantineEnabled :
SCLJunkThreshold :
SCLJunkEnabled :
AntispamBypassEnabled : False
ServerLegacyDN : /o=Tao Hosting Services/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)
/cn=Configuration/cn=Servers/cn=PHSSV1-005
ServerName : phssv1-005
UseDatabaseQuotaDefaults : False
IssueWarningQuota : Unlimited
RulesQuota : 64 KB (65,536 bytes)
Office :
UserPrincipalName : [email protected]
UMEnabled : False
MaxSafeSenders :
MaxBlockedSenders :
NetID :
ReconciliationId :
WindowsLiveID :
MicrosoftOnlineServicesID :
ThrottlingPolicy :
RoleAssignmentPolicy : Default Role Assignment Policy
DefaultPublicFolderMailbox :
SharingPolicy : Default Sharing Policy
RemoteAccountPolicy :
MailboxPlan :
ArchiveDatabase :
ArchiveGuid : 00000000-0000-0000-0000-000000000000
ArchiveName : {}
JournalArchiveAddress :
ArchiveQuota : 100 GB (107,374,182,400 bytes)
ArchiveWarningQuota : 90 GB (96,636,764,160 bytes)
ArchiveDomain :
ArchiveStatus : None
ArchiveState : None
RemoteRecipientType : None
DisabledArchiveDatabase :
DisabledArchiveGuid : 00000000-0000-0000-0000-000000000000
QueryBaseDN :
QueryBaseDNRestrictionEnabled : False
MailboxMoveTargetMDB :
MailboxMoveSourceMDB :
MailboxMoveFlags : None
MailboxMoveRemoteHostName :
MailboxMoveBatchName :
MailboxMoveStatus : None
MailboxRelease :
ArchiveRelease :
IsPersonToPersonTextMessagingEnabled : True
IsMachineToPersonTextMessagingEnabled : True
UserSMimeCertificate : {}
UserCertificate : {}
CalendarVersionStoreDisabled : False
ImmutableId :
PersistedCapabilities : {}
SKUAssigned :
AuditEnabled : False
AuditLogAgeLimit : 90.00:00:00
AuditAdmin : {Update, Move, MoveToDeletedItems, SoftDelete, HardDelete, FolderBind, SendAs,
SendOnBehalf, Create}
AuditDelegate : {Update, SoftDelete, HardDelete, SendAs, Create}
AuditOwner : {}
WhenMailboxCreated : 22-1-2014 10:12:00
SourceAnchor :
UsageLocation :
IsSoftDeletedByRemove : False
IsSoftDeletedByDisable : False
IsInactiveMailbox : False
IncludeInGarbageCollection : False
WhenSoftDeleted :
InPlaceHolds : {}
Extensions : {}
HasPicture : False
HasSpokenName : False
AcceptMessagesOnlyFrom : {}
AcceptMessagesOnlyFromDLMembers : {}
AcceptMessagesOnlyFromSendersOrMembers : {}
AddressListMembership : {\yin_GAL, \yin_AL, \Mailboxes(VLV), \All Mailboxes(VLV), \All Recipient
s(VLV), \Default Global Address List}
Alias : kevin_yin.com
ArbitrationMailbox :
BypassModerationFromSendersOrMembers : {}
OrganizationalUnit : phs.local/Hosting/yin
CustomAttribute1 :
CustomAttribute10 :
CustomAttribute11 :
CustomAttribute12 :
CustomAttribute13 :
CustomAttribute14 :
CustomAttribute15 :
CustomAttribute2 : yin
CustomAttribute3 :
CustomAttribute4 :
CustomAttribute5 :
CustomAttribute6 :
CustomAttribute7 :
CustomAttribute8 :
CustomAttribute9 :
ExtensionCustomAttribute1 : {}
ExtensionCustomAttribute2 : {}
ExtensionCustomAttribute3 : {}
ExtensionCustomAttribute4 : {}
ExtensionCustomAttribute5 : {}
DisplayName : Kevin
EmailAddresses : {X500:/O=TAO HOSTING SERVICES/OU=EXCHANGE ADMINISTRATIVE GROUP /CN=RECIPIE
NTS/CN=665EE4639A4D47ABAB470761E386AF05, SMTP:[email protected]}
GrantSendOnBehalfTo : {}
ExternalDirectoryObjectId :
HiddenFromAddressListsEnabled : False
LastExchangeChangedTime :
LegacyExchangeDN : /o=Tao Hosting Services/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)
/cn=Recipients/cn=665ee4639a4d47abab470761e386af05
MaxSendSize : Unlimited
MaxReceiveSize : Unlimited
ModeratedBy : {}
ModerationEnabled : False
PoliciesIncluded : {}
PoliciesExcluded : {{26491cfc-9e50-4857-861b-0cb8df22b5d7}}
EmailAddressPolicyEnabled : False
PrimarySmtpAddress : [email protected]
RecipientType : UserMailbox
RecipientTypeDetails : UserMailbox
RejectMessagesFrom : {}
RejectMessagesFromDLMembers : {}
RejectMessagesFromSendersOrMembers : {}
RequireSenderAuthenticationEnabled : False
SimpleDisplayName :
SendModerationNotifications : Always
UMDtmfMap : {reversedPhone:63900611613+, lastNameFirstName:8262522337367653, firstNameLast
Name:7653826252233736, emailAddress:7653}
WindowsEmailAddress : [email protected]
MailTip :
MailTipTranslations : {}
Identity : phs.local/Hosting/yin/Kevin
IsValid : True
ExchangeVersion : 0.20 (15.0.0.0)
Name : Kevin
DistinguishedName : CN=Kevin,OU=yin,OU=Hosting,DC=phs,DC=local
Guid : f9ac1bfa-e174-4922-86a9-7698f30ac54e
ObjectCategory : phs.local/Configuration/Schema/Person
ObjectClass : {top, person, organizationalPerson, user}
WhenChanged : 20-11-2014 12:42:16
WhenCreated : 14-1-2014 13:05:03
WhenChangedUTC : 20-11-2014 11:42:16
WhenCreatedUTC : 14-1-2014 12:05:03
OrganizationId :
OriginatingServer : PHSSV1-001.phs.local
ObjectState : Unchanged
[PS] C:\Windows\system32>

SMTP Portlet - Address lookup not working

I've installed the upgraded SMTP portlet and configured the OID Configurations according to the directions. When I try to look up an address, the address window pops up, but there is nothing there. The '%'is in the search box. I click search, but no results. Any help would be appreciated.

Oh! glad to see you'd like to address problem with email portlet. Actually I've posted in this forum at
Email portlet 9.0.4 shows error message in application.log
Could you please take a look at this topic?
Thanks a lot!

Address lookup in mail To: field ignores suggestions

Hello,
when a mail is composed and the receiver is looked up in the To: field the normal behaviour of Groupwise is to make a suggestion. The user can confirm the suggestion with the tab or the enter key.
For example one types the letters "Fo" and Groupwise makes the suggestion "Foo, Bar" (with "o, Bar" marked) and the user hits the enter key, Groupwise accepts "Foo, Bar" as the receiver.
However, I have one user in which the suggestion is completely ignored. Example: When the user types "Fo" Groupwise suggests "Foo, Bar" as usual. But when the user hits enter or tab Groupwise ignores it's own suggestion and presents a listbox with all names containihng "Fo", e. g. "Foa, abc", "Fob, Def" and even "Othername, Foo123". So the problem is, that the user can no longer confirm Groupwise suggestions with the tab or enter key.
What might have gone wrong here? The user suspects that he accidentally changed the behaviour by hitting some strange keystroke combination.
Note: Name Completition is not disabled
System is Groupwise 8 client with Windows 7 professional 64bit
Regards,
Henry

Originally Posted by laurabuckley
Open up a New E-mail dialog. Right-click in the TO: field and deselect "search mode" (or something to that effect) from the context menu that appears.
That was the solution to the problem, thank you.
Regards,
Henry

Address Lookup

Similar Messages

Maybe you are looking for