Address number of a Plant & a Customer are same

Hi Gurus,
Somehow a plant and a customer has the same address number (ADRC-ADDRNUMBER). Because of which when u change the address of the customer the plants address is getting changed. This has happened after the customer has been assigned with the search term of that of the plant. Reversal of which doesn't solve the problem.
Please advice what needs to be done.
Regards,
Adeeb

Hi All,
I had followed OSS note # 164653. SAP has provided programs to repair the customer who has duplicate address number.
Thanks,
Adeeb

Similar Messages

  • Is the purchase order number and purchase document numer both are same

    is the purchase order number and purchase document numer both are same or different?
    thanks.

    Hi Sunny,
    Yes they are same. You will be creating a purchase order in ME21n. After creating purchase order you will shown a number for that order.
    Reward points if useful.
    Thanks,
    Swamy Kunche

  • Sales document number based on pricing procedure ,sales area , customer pri

    Hi,
    where can i get saler document number based on pricing procedure ,sales area , customer pricing procedure and document pricing procedure.
    please tell me the table name.
    Thanks
    Edited by: pandu123 on Jun 16, 2011 8:22 PM

    I never heard of this requirement before, pulling sales document number based on pricing procedure based on customer pricing proc + document pricing procedure +sales area. These data are found in tables VBAK, T683,KNVV and TVAK. I dont think you can use ABAP query to join these table, check with an ABAP'er to develop a program for this requirement.
    Regards,

  • In which transaction can we see the address number of customer?

    Hi All,
    In which transaction can we see the address number of customer that appears in KNA1 table ADRNR field?
    I tried XD03 and VD03 transactions. I was not able to find it out. Can any one help me out to findout this.
    Thanks,
    Vinod.

    HI Vinod,
    The customer address is visible on the transaction. But to store this address in DB the whole address i sliked to a number and then stored in DB. So this addressnumber will not be in the Txnl screen.

  • How to default an address number delivery address in the PO item

    Hi All,
    I have some combination of certain Material / Vendor / Delivery address.
    I have created some address numbers from transaction MEAN.
    I can successfully assign these in PO detail manually. Then the address gets updated from it
    for plant or storage location if specified.
    What I need to know is how to "default" this address number in the PO detail.
    I couldn't fine appropriate field in info record, but I have a feeling that it should be possible.
    Could anyone help me on this please?
    Thanks,
    ATO

    Hi Nadia,
    Thank you for your reply.
    The plan is that storage location gets default on the PO by material master setting.
    I have configured the storage location address, so this defaults in the delivery address tab.
    This storage location is our warehouse to receive goods.
    Sometimes we delivery goods directory to the vendor without receiving into the warehouse.
    In this scenario, we are using the address number to print the vendor address on the PO output.
    The combination of material and vendor is unique when we need to deliver directory.
    So the expectation is to default this address number in this certain case.
    Do you mean this will be possible without user exit?
    Thanks,
    ATO

  • How to get the Personal Number from Address Number

    Hi,
    I have one requirement which is as follows.
    I have one Customer. I am fetching Address Number(ADRNR) of this customer number from table KNA1.
    I want to find the Personal number linked to this Address number and Customer.
    Is there is any table or FM from where i will get the Personal number of the Customer using Customer number and Address number?
    Kindly Help

    Hi Sachin,
    Check this FM BUP_PARTNER_PERSNUMBER_GET
    " Check KNB1 and the Field name is PERNR, Most of the times this is not maintianed.
    " This refers to the Employees who are assigned as Customers
    " In XD03 go to the Company Code Data there you can find this Value
    " For more info contact your Functional Consultant
    " This is to the Best of my knowledge
    Also Check KNB1 but000 Tables
    Cheerz
    Ram

  • More than one Plant in Customer Material record

    In Customer Material Info record I want a option of more than one plant. Right now I can enter only one plant in customer material info record. What can I do to have a option of more than one plant in customer material info record.
    Regards,
    Kumar

    hello, friend.
    as i understand, you would want options for more than one plant (to choose from) and not to restrict the number of choices.
    for practical reasons, you can only enter 1 (standard) plant in the customer-material info record.  nevertheless, you can enter a different plant in the customer master, and another plant in the material master.
    when you process the sales order, you can change the plant to any other choices, even those not included in the customer-material or customer master data, as long as these plant choices and your customer are assigned the same distribution channel.  of course, your material should also be extended to these plants.
    i hope this helped, even if a little.
    regards.
    jty

  • Material number are same but attribute of materials are different.

    What if we have two system connected with APO with similar material numbers but in fact different material in description.
    I mean, numbers are same but attribute of materials are different.
    How to address it in APO.....?
    Regards

    HI,
    An SCM system (APO) can be integrated with multiple ECC systems (logical
    systems). It may therefore be the case that the number assignment for certain
    master data objects, for example, material masters, is not the same in all these
    logical systems. In the example above, material number A in logical systems 1
    and 2 signifies the same cube, whereas the same material number in logical system
    3 (perhaps a subsequently purchased plant) is a cylinder.
    If logical systems 1, 2 and 3 are planned with the same SCM System, the problem
    arises that the system cannot simply transfer the ECC material numbers into APO,
    as they may be ambiguous.
    To guarantee that the naming of master data in distributed system landscapes is
    unique, business system groups are defined in APO as areas of the same naming
    convention. A Business System Group (BSG) groups different physical systems to
    form a higher-level logical unit.
    If, for example, two logical systems (LS1 and LS3) exist in a system landscape in
    which you want to integrate APO and contain different materials with the same
    name (Material A is a cube in LS1, but a cylinder in LS2), this conflict must
    be resolved for integration in APO. First of all, both logical systems are to be
    assigned to different business system groups (BSG1 and BSG2).
    check and revert back , Hope it will help you.
    Regards
    Ritesh

  • Stock Transport from plant to MRP Area

    I have been looking for explanation on how to handle replenishment of MRP area storage location stocks within a plant.   We use Special procurement types but they are set up on for plants, not MRP areas.  Can anyone explain how this works and the configuration to make it work?   Were setting up a warehouse as an MRP area and need to replenish its stocks with MRP.

    Aren't your questions answered in SAP online help?
    Integration
    The process is the same as for Storage Location MRP. In contrast to the storage location MRP, you can use all MRP procedures and are not limited to the reorder point planning procedure.
    Prerequisites
    In Customizing for MRP, you have created the special procurement key for Stock transfer from plant to MRP area for the plant in which the MRP area is located. You have defined the following parameters:
    - Procurement type: F for External procurement
    - Special procurement: U for Stock transfer
    - Plant: Number of plant, to which the MRP area belongs.
    In the material master, you have created the MRP area segment and assigned the special procurement key Stock transfer from plant to MRP area.
    Features
    During MRP, the system generates a stock transfer reservation for the material in the MRP area and a material reservation in the plant MRP area.
    The external procurement storage location that you have entered in the MRP area segment of the material master is used as the receiving storage location. If you have not maintained this field, the system uses the receiving storage location that you entered for the MRP area in Customizing.
    The actual procurement is processed by the plant. With stock transfer to the MRP area, you carry out the transfer posting for the material with reference to the reservation.
    Standard procurement key 45 is for that purpose: plant: 1000 (V460A-WERKS), procurement key F; special procurement: U; plant: 1000 (V460A-WRK02).
    So, in both fields you have to write the same plant as it is clearly written in SAP onilne help.
    As SAP help says: a Stock transfer reservation is created. Using MIGO (A08; R09) you can post the goods movement by mvt 311 with reference to the Stock transfer reservation (MB1A is also good).
    Why don't you test in in your sandbox system and you will see how it works.
    (If you want to use STO (purchasing document type UB) in this process you have to go trough OSS note 599915)
    Edited by: Csaba Szommer on Jun 12, 2009 11:46 PM
    Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM
    Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM

  • New Document Address Number

    Hi All-
    We are on SRM 5.0, SP6 Ext classic scenario. Every time we create a Shopping cart with an existing Ship to Address number, the system generates a new document address number in SRM even though the address number and the address already exist in SRM.
    I am not sure if this happens standard in SRM 5.0 or is it due to some custom development on our system. I am aware that this was an old Issue and there were OSS notes related to it:
    Note 570543 - Creation of document addresses
    Note 718206 - Copy template: New address number for delivery address
    Can somebody confirm if they are seeing the same behaviour on their SRM 5.0 system? If yes, i can go ahead and create an OSS message and keep you guys updated.
    Thanks,
    Sundeep

    Hi Sundeep,
    We are using SRM 5.0 , SP7 and it is not creating new address number whenever we create new shopping cart.
    But it is creating new address numbers whenever some changes were made to the business partners.
    Rgds,
    Teja

  • Changing address number in KNA1

    hi there,
    adress for customer is stored in ADRC, ADR6, etc................with adrnr as key.
    Adress number is stored in table KNA1.
    how can i 'connect' another adress number to KNA1 without doing 'hardcoded'  table-update (which is dirty).
    reg, Martin

    I have customer A with its adress data with e.g. adrnummer 123.
    I have customer B with its adress data with e.g. adrnummber 321.
    I want customer B to have the adress of customer A, so customer B needs the adrnr 123
    I'd strongly suggest to refrain from such changes that are not supported by the data model. I.e. within standard SAP you cannot create two customers with a reference to the same address. The storage of addresses via central address management (i.e. ADR* tables) is completely transparent to the user and not visible.
    Let's assume that you'd implement what you're trying to do. Now changing the address of customer A, automatically changes the address of customer B. Thus in order to show the link you'd have to somehow make a grouping indicator visible that ensures that customers with the same address reference can be identified via the user interface (i.e. XD03, VD03, etc. transaction and not SE16 on KNA1). Using a grouping indicator other than the address number would require to keep the two in sync. Possible, but a maintenance issue.
    So without further information your data model sounds quite strange, as it's unclear why you'd have to reference addresses instead of syncing up addresses automatically. I.e. if you have a program that somehow can identify customers A and B as customers, which should share an address, then it shouldn't be too hard to update the address fields instead using standard SAP functionality.
    I do understand that you'd have possibly trouble ensuring address consistency when addresses are changed (i.e. simultaneously on A and B), but if you think about your model, you can see the same issue. I.e. customers are not locked on address level, so two people could change the address for A and B at the same time. Since they share the address, the last update would win and overwrite the other updates. I can see already the help desk getting all those calls from users asking why the system doesn't work...
    Long story short, my simple recommendation is Don't do it!.
    Cheers, harald

  • What is the number for Verizon Wireless  Corporate Customer Service Complaint for CA

    My Complaint:  I have been a Verizon Wireless customer for approx 20 years.  I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning.  She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer.  The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of  I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone.  I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer.  If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade.  It is times such as these that you get to see how much of a "valued customer" you really are.   I guess you are valued as long as you pay your bill and continually  purchase their products.  I would like to speak with someone from Verizon's corporate or customer relations department.  As of now I am really considering changing my service to a different provider.  I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

    I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat  other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
    msvat <[email protected]> wrote:
    msvat  created the discussion
    "What is the number for Verizon Wireless  Corporate Customer Service Complaint for CA"
    To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
    >

  • How to print address without address number

    Hi experts,
         If  address numer is found in table  t001w  this is working fine.
         user required custom address directly hardcode based plant and sorg  which doen't contain record in table t001w.
    I am not getting adrnr in  table t001w , so I am writing hardcode but its not working , can you please tell me how to solve this issue.
      This is ouput parameter    &GV_ADDNR_VENDOR&
    READ TABLE it_ekpo into wa_ekpo INDEX 1.
      SELECT SINGLE * FROM t001w INTO ls_t001w
                     WHERE werks EQ wa_ekpo-werks.
    if wa_ekpo-werks = '2000' and wa_ekpo-lgort = '5200'.
      ls_t001w-NAME1 = 'Connors Bros'.
      ls_t001w-STRAS = '2 King Street, 3rd floor'.
      ls_t001w-ORT01 = 'San John'.
      ls_t001w-REGIO = 'N.B.'.
      ls_t001w-PSTLZ = 'E2L 1G2'.
      ls_t001w-adrnr = '000012345'.
      MOVE ls_t001w-adrnr TO gv_addnr_vendor.
      else.
       MOVE ls_t001w-adrnr TO gv_addnr_vendor.
    ENDIF.
    Thanks,
    mahahe

    Hi mahahe,
    You could do this checking first before you hardcoded it.
    IF GV_ADDNR_VENDOR = ''
    READ TABLE it_ekpo into wa_ekpo INDEX 1.
    SELECT SINGLE * FROM t001w INTO ls_t001w
    WHERE werks EQ wa_ekpo-werks.
    if wa_ekpo-werks = '2000' and wa_ekpo-lgort = '5200'.
    ls_t001w-NAME1 = 'Connors Bros'.
    ls_t001w-STRAS = '2 King Street, 3rd floor'.
    ls_t001w-ORT01 = 'San John'.
    ls_t001w-REGIO = 'N.B.'.
    ls_t001w-PSTLZ = 'E2L 1G2'.
    ls_t001w-adrnr = '000012345'.
    MOVE ls_t001w-adrnr TO gv_addnr_vendor.
    else.
    MOVE ls_t001w-adrnr TO gv_addnr_vendor.
    ENDIF.
    ELSE.
    " Get it from table t001w.
    ENDIF.

  • Single Vendor Multiple customer with same address

    Hello Guru,
    I have one scenario in retail business.ie I have one single vendor with two different customer but the address of that customer is same in both of them.i.e the vendor address will be same(applicable) in both the customer.But the VAT number is different in both the customer when ever i create the vendor master system should ask the different VAT number.
    Regards,
    Sukdev.

    Yes. I could have laid odds that this would be the first response :-)
    I know it is unusual, and I am aware of the inherent issues with doing something like this. I have read the multipathing guide, but it wasn't that helpful, because I want the same IP address, not just the same subnet. It is NOT for load balancing, or failover support. I'm afraid I can't give too much detail at the moment because of the nature of research project. What I will add is that I want to do this on an 802.1q enabled NIC, on the same physical port, with different logical interfaces for each VLAN having the SAME IP address.
    We can already do this on Linux, and as I said in the original post, the route man page suggests that it can probably be done on Solaris. What I really need to know is how?
    Any takers?
    AJB

  • New ADRNR  (address number ) created for Every Purchase Order

    Hi Friends,
    Whenever I create a Purchase Order, I can see that in EKKO there is a new address number updated which is unique for every PO. This address is copy of the vendor address but the address number is different. The effect of this is that my PO is blocked in GTS since the Flag for manipulated in the partner of the API.
    Now my question is why does the system create a new address number for every Purchase order. For some Purchase order this is not happening.
    Thanks for your help in advance.
    Regards,
    Vijay V

    Hi,
    Good to know this. But then how does GTS (SPL check) system identify this dynamically created address. Must this not be passed to the GTS system by writing it in the user exit or is there some other standard way of doing this.
    But we are not entering the address manually in these POs.
    Also some POs that are not for One time Vendor is also having an address entry in the EKKO table. SO it is not only for OTV POs.
    Regards,
    Vijay V
    Edited by: Vijay Venkataraman on Jan 13, 2011 4:35 PM
    Edited by: Vijay Venkataraman on Jan 13, 2011 4:41 PM

Maybe you are looking for