Address of the user changed updated into sap but still not reflecting at
address of the user changed updated into sap but still srm shopping has the old
address .
what could be the possible reasons of this bug?
Hi
Which SRM version are you using ? <b>We encountered the Same Issue long time back -></b>
Are you updating the Addresses in Web Transaction or using SAP GUI (SU01 transaction) ?
<b><u>Please go through the following SAP OSS Notes below, which will definitely help -></u></b>
Note 930371 - SRM 5.0: BBPUM01 Check Data
<u>Related Notes</u>
Note 931556 - SRM 5.0: Hiding the BBPUM01/BBPUM02 button
Note 923461 - SRM 5.0: BBPUM01 description for position
Note 885954 - SRM-UME: User synchronization with wrong address data
Note 884067 - BPartner w/o an private address can't change their settings
<u>Do let me know.</u>
Regards
- Atul
Similar Messages
-
I cannot open a tab to the right of an existing tab. I've followed the directions provided under normal FAQ. This feature just recently was wiped from my PC, and I am not certain how.
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
since my ipod updaded to ios8 its not connecting to the internet i've tried evrting but still not working plzz help
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
When I try to open itunes on my school network windows Xp computer I get an error message with this code 0x80092013. I have tried all of the suggestions from apple support document but nothing has worked.
Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock -
Hi There my i phone will not charge all of a sudden tried using diffrent cables and now i have had the battrey replaced but still nothing. It is now completey dead. Not sure what ealse to do?
Hey jojo-10!
Here is an article for you that can help you troubleshoot this issue with your iPhone:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Crystal Report integrated into SAP but Menu not sorting well
Dear Expert,
I am worry about the Crystal Report menu displayed from SAP B1;
May I know the sorting rule? because it's not sorting by name or by adding date; and it looks not well organized now for users to choose reports.
Thanks in advance.
Best regards,
MichelleHi Allen,
Try to browse this link:
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88
beside the thread provided by Gordon.
I am sure the real Crystal Report that will launched with SAP B1 2007A product CD in the last August have been improved and different with the free trial. So, I suggest to browse SAP service market place to know more if it is available in your country
Rgds, -
as above
You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441) -
Podcast app v. 2.0.1 update released today, but still not working
Several months ago, I purchased two new iOS devices and have not been able to use Podcasts on either device. I spoke with a level 2 Apple tech support specialist over the course of several days trying to resolve the issues and he eventually concluded that the bugs were in the programming and said he would pass the information along to the engineers.
After many months of being unable to use Podcasts, I was excited to see a new update for the Podcast app. Unfortunately, it appears the major issues plaguing the app have not been addressed.
Is anyone else able to get this app to work reliably? I try copying/syncing podcasts, and you can watch them copy over and see them displayed in iTunes, but they do not display in the Podcast app on the device.
Can anyone else confirm this behavior? Is there any procedure that will get the app working correctly? I have tried removing all podcasts, as well as removing, redownloading, reinstalling the Podcast app, but so far no good. Is there a third party app that will allow me to play podcasts under iOS 7.0.4?I have managed to get the Podcast app to work somewhat reliably as follows. Note I haven't tried 2.0.1 yet so I don't know if they broke it further (if that's even possible) -- or perhaps they will buck the current Apple trend and actually fix something.
1. Forget synching with iTunes -- it's completely broken. I subscribe to the podcasts on iTunes but don't download on iTunes. Subscribing on iTunes is useful because it doesn't seem to "lose" episodes the way the Podcast app does, so when the Podcast app loses episodes (discussed below) I can still see them on iTunes so I can retrieve them again.
2. I subscribe to all my podcasts in the Podcast app. I set them to download automatically and keep all unplayed. I leave the sort and play options at the default of Sort Newest On Top and Play Oldest First.
3. I don't use My Stations except for On-The-Go when I want to listen to episodes from different podcasts -- just add each episode to OTG in the order you want to listen to them.
4. If I have multiple episodes of a single podcast I want to listen to, I just open it in My Podcasts and start the oldest one playing and they will play in the proper order.
5. You can stream a podcast on iTunes -- that seems to work, and it may even remember the playback position. When I'm at home I Air Play to my Apple TV from my iPhone.
6. The Podcast app will sometimes discard unplayed downloaded podcasts. Resetting the iPhone usually triggers this but sometimes a simple power off+on will do it as well. To get them back, you need to open each podcast in My Podcasts and tap the Add Old Episodes. Lo and behold there are the "disappeared" podcasts still marked as unplayed. Just add each one back and it download again. -
facebook not loading on my iphone 5
Delete the Facebook app then reinstall.
Tap and hold down the Facebook app until it jiggles then tap the x then tap Delete. Press your Home button once or twice to stop the jiggling.
Restarrt your iPhone.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Then go to the App Store and re download Facebook. -
How pricing condition be auto updated if the user changes price in PO ?
Hi
Is there any configuration setting on how pricing condition can be automatically updated if the user changes price in the purchase order ?
Thanks
MaruthiHi Maruthi,
As far as I know, POs (like many other documents in SAP) are "snapshots" of data as it was at the time of the document creation. This snapshot has no direct link to master data, so it will not change unless you go to the document and manually change/refresh whatever data you need updated.
Even if there were a way to link your PO to master data to auto-update I don't see how any change on a PO could go backwards and change master data. Pricing works the other way around - the PO takes the price from the condition records, not the records from the PO.
Hope this helps,
J -
Scripts for changing the address of the user when they have been in the box for 6 months
Scripts for changing the address of the user when they have been in the box for 6 months
If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old
Anyone have suggestions on how I can go about it?What is this "box"? What is this "folder" you're asking about? You'll likely get a better answer if you use standard terminology.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Can two user can logon into sap b1 8.8 as like sab b1 2005
Hi All Expert,
As we know that as like SAP B1 2005 we two user can logon into sap from a user id , My question is can we do the same on sap 8.8 also..
Regards,
Inder.Hi Gordon,
Do the old two log in with the same user id is working with 8.8 also..
Thanks and Regards,
Inder. -
How to catch an event when the user change values in the project information dialog
hi,
i would like to know how to catch an event in my C# code when the user change values in the project information dialog?
taskChange doesn't catch these changes.
thanks.
Thanks, Sharon.You need to write save button event handler for project information dialog. Link is having same functionality described.
http://blogs.msdn.com/b/husainzgh/archive/2011/08/01/hooking-into-the-project-detail-page-ribbon-save-button-without-overriding-out-of-box-functionality-in-project-web-access-for-project-server-2010.aspx
http://www.projectserver2010blog.com/2010/01/sharepoint-2010-webpart-client-server.html
kirtesh -
My home wifi connects ok but consistantly disconnects requiring the user to go into settings, wifi, and reconnect. Very annoying. Any ideas on what causes this?
Thanks, but I have done that. All the settings on the mini are identical to the iPad 3 & still the mini won't work properly. I'm sure it was something I had to change on servers to get both the Macbook & iPad 3 working, just wish I could remember what!! Any more suggestions welcome! Thanks
-
Please help. I changed my apple id password and now cannot use facetime and my icloud continues to prompt me for my password and I continue to give it but, I repeatedly am prompted for the password unless I cancel the icloud. I have tried changing my password back to the password I had before and this did not work. I have tried to use another e-mail address for facetime and had verified that e-mail address and this did not work. I do not know how to fix this problem. I have thought about changing my apple id but am not sure how I would be able to carry over the same credit card number to the new apple ID. I loved my Mac book Pro because I could facetime my boyfriend while I am working away and now I cannot. I am starting to hate Mac.
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
Maybe you are looking for
-
Problem with inserting/removing integer in a specified index
I have an IntList that I am adding methods to and an IntListTest driver that allows me to add those options to test. I am having difficulty adding the two methods: public void removeAt() - removes the value at a specified location at given index with
-
I have SQL 2012 running on a Windows server 2012. I just loaded the Visual Studio Business Intelligence Studo 2012 that I downloaded from Microsoft. My problem is that when I click "Save Copy of package.dtsx As..." , instead of getting the "Save
-
Firefox has been allowing all sorts of pop-ups even though I've established the block in the content. This is just one of the pop-up sites: http://partners.livingsocial.com/cities/soon?ref=cpxpop When I go to a website I'm interested in a ribbon come
-
Requesting license for two different ssystem with same SID
Hello, Is it possible to request 2 license for two systems with same SID. The systems are on different machines and their HW key are different but both have same SID. While requesting license, will it permit to create 2 different license with SAME SI
-
Set Default Opening Application for a certain type of file?
I need some help saving time! I have lots of .groovy files that my apple doesn't know how to open and i have to select a default opening application for every single file! Is there a way to do this for multiple files or for a certain file type? thank