Address Rewriting - Sender and Recipient

Is there any way to perform address re-writing for BOTH the sender address and the recipient address for all outbound mail? We need to use it in-between two separate mail systems. Or is it just limited to sender for outbound and recipient for inbound?

Hi,
I recommend that you use email address policy to achieve your requirement.
Email Address Policies
For a recipient to send or receive email messages, the recipient must have an email address. Email address policies generate the primary and secondary email addresses for your recipients so they can receive and send email.
Hope this helps!
thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Sender and Recipient has same email address

Hello ALl,
I have an problem on the email sending. We have application to send email to internet. But many emails are not delivered to the internet. When i see message tracking i can see Sender and Recipient has sender email address. (Same Email address)
When i see message header i can see below one.
X-CreatedBy: MessageSnapexcht-Begin injected headers
X-MessageSnapexcht-UTC-Time: 2014-02-25T10:25:01.514Z
X-MessageSnapexcht-Protocol-Id: 08D10028C25D0A26;2014-02-25T10:24:56.506Z;1
X-MessageSnapexcht-Source: Original
X-Sender: [email protected]
X-Receiver: [email protected]
X-EndOfInjectedXHeaders: MessageSnapexcht-End injected headers
Received: from exchSCC021035 (172.30.16.171) by exchCASHT01.contoso.ad
(192.168.10.200) with Microsoft SMTP Server id 14.2.247.3; Tue, 25 Feb 2014
15:55:01 +0530
MIME-Version: 1.0
From: saaacq <[email protected]>
To: [email protected]
CC: [email protected]
Date: Tue, 25 Feb 2014 15:55:01 +0530
Subject: Card Statement
Content-Type: multipart/mixed;
boundary="--boundary_92_20dafa4b-8bf0-4442-8784-a7727d0e1699"
Message-ID: <[email protected]>
Return-Path: [email protected]
X-MS-Exchange-Organization-OriginalArrivalTime: 25 Feb 2014 10:25:01.5147
(UTC)
X-MS-Exchange-Forest-ArrivalHubServer: exchCASHT01.contoso.ad
X-MS-Exchange-Organization-OriginalClientIPAddress: 203.30.16.124
X-MS-Exchange-Organization-OriginalServerIPAddress: 192.168.10.215
X-MS-Exchange-Organization-AuthSource: exchcasht01.contoso.ad
X-MS-Exchange-Organization-AuthAs: Anonymous
X-MS-Exchange-Organization-MessageDirectionality: Incoming
Please advice me on this.

Hi,
Do you mean the "From: saaacq <[email protected]>" and "CC: [email protected]" have the same address?
Do we have some Transport Rules applied?
Please run following command to verify whether we have some Transport Rules:
Get-TransportRules | FL
Do other users in our org have this issue?
How about the mailflow to internet? If all of the users in our org cannot send to internet, please verify the Send Connector Configuration on Exchange Server 2013.
Providing an article for your reference:
Configuring Outbound Mail Flow in Exchange Server 2013
http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hello Nikkii,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Troubleshooting telephone-number activation (iPhone only)
After each step, toggle FaceTime and iMessage off and then on in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that your iPhone is set to the correct time zone. Tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
Verify that you can send SMS messages. You need a valid SMS messaging plan to activate FaceTime.
Contact your carrier to verify that there are no restrictions or blocks on text messages. Blocks on text messaging will prevent iMessage and FaceTime registration.
If you are unable to activate iMessage or FaceTime on a device after remote wiping it, wait at least 24 hours and try again.
If "Waiting for Activation" is displayed, leave FaceTime and iMessage enabled for 24 hours. Toggling FaceTime or iMessage off and on will cause the registration process to start over.
Best of luck,
Mario

Arbitrary email addresses in send and reply fields

I have been trying to figure this out for a while, so apologies if it seems obvious. I have a domain foo.com and use many different addresses [email protected], [email protected], etc to distinguish mail from different senders. For example, if I set up an account at amazon I give an email address of [email protected] to allow simple spam filtering and categorization. Then I open a gate in mac mail by adding a rule saying allow mail to "[email protected]". All these addresses (and there are MANY of them) are directed through a single account by my host service. Though the "to" field distinguishes them, the account they come in under is associated with an official email address of "[email protected]".
Sometimes I need to send an email from one of these addresses. In particular, certain sites require an email+reply confirmation process which demands that the reply come from the [email protected] address. Often the original is sent via a web form, so mac mail plays no role. In mac mail, I can set the default to reply from a fixed address (from the list of official account email addresses) or from the official address of the "account" I last looked at, etc. I can also select from a pull down list of the official account email addresses. However, without adding a bzillion email addresses to the list by hand (and selecting or changing the prefs each time), I can't seem to simply modify the reply-from address or the sent-from address to be arbitrary. I want to do 1 of 2 things:
1. Easily and directly edit the sent from or reply from field of a single email without changing any default settings or going into a preferences pane.
or 2. Set a default of "reply-from" the address to which the email was addressed (rather than the account).
I imagine the 2nd is problematic because there is no way to identify the address which is "me" in the recipient line if it is not known (like the "official" account address). I know how to do the 1st with sendmail, but that kind of defeats the purpose of using mac mail for integration.
Does anyone know how to do this?
Thanks in advance for your help.
Cheers,
Ken

Thanks for the reply, but that doesn't quite help. I don't want to have to go into preferences and add a new address each time I reply. There are over 100 of these addresses and most get used infrequently. I want to simply edit a field in the email directly. The drop down menu solution doesn't work with a large and constantly growing set of addresses. Imagine you have [email protected] through [email protected] on your domain bar.com. If you get an email addressed to [email protected] you wouldn't want to have to go into preferences and add that to the allowed list before being able to reply. I want to simply reply as [email protected] There are legitimate reasons to set stuff up like this. I just want to be able to edit the "from" field in an email message the same way I can edit the "to" field. It would be equally frustrating if I had to go into preferences to add a recipient's email address every time I wanted to send one out.

Issue with how Mail displays sender and recipient names in message list

Hi everyone!
I've been looking for a solution but had no luck so far.
Here's the issue:
In Mail, the sender email address or the recipient name would sometimes be displayed twice between chevrons.
For example, sometimes in my sent folder, in the "To" column, the recipient name is displayed twice like this <[email protected]> <[email protected]> whereas it used to be displayed once and without chevrons. This happened since i have reinstalled Snow Leopard (clean install).
Hope someone can help.
Thanks!

Henry,
Please post this question on the weblogic.developer.interest.integration
newsgroup.
Regards,
Raj Alagumalai
Backline Workshop Support
"Henry Mugasha" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using a Task Control Factory to create Task Control Instances in aloop
and then
create tasks and assign them to a predefined group. I have an event choice
for two events
waiting for the onTaskCompleted and onTaskAborted event call backs.
I have two such operations (of task creation) in the same loop. For
simplicity I have used two separate task factory controls for each of the
tasks (because I even had worse problems using a single control factoryfor
both tasks in the same loop).
When I instantiate the process, through work list I am able to claim,start
and complete the first task. When I try the same procedure (claim, startand
complete) on the second task, the the event choice for the corresponding
task receives 2 event call backs. First it receives the onTaskCompleted as
expected, but then it also received another call back of the same typewhich
displays the error on the server log as:
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <on process
completion, 1 undelivered messages to
'sampleRequestTaskFactoryCtrl_onTaskCompleted'>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <A message wasunable
to be delivered from a WLW Message Queue. Attempting to deliver the
onAsyncFailure event>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
Does anybody know why two events are fired for the same work list action?
Thanks in advance.
Henry M

Email Func:BCS Classes-Customizing the sender and receiver

Hi All,
In my functionality previously, I used FM 'SO_DOCUMENT_SEND_API1' wherein I can freely customized the sender and recipient. But I need to change it to BCS class due to 50 character limitation in Subject.
Please see thread Email Functionality:How to create Email Subject w/ more than 50 CHAR Length.
DATA: recipient          TYPE REF TO if_recipient_bcs.
*SENDER*
"Set Sender
      sender = cl_sapuser_bcs=>create( sy-uname ).
      CALL METHOD send_request->set_sender
        EXPORTING
          i_sender = sender.
The code above would always trigger the email of the owner of SY-UNAME. In my case, I need a custom one email, let's say, a hard coded non SY-UNAME email.
What I did:
Change the data definition of sender as follow, but this would give me not compatible type parameter.
DATA: sender             TYPE REF TO if_sender_bcs.
"sender = cl_sapuser_bcs=>create( '<sender_email_literal_goes_here>' ).
Question: Is this possible? or the class is fixed to SY-UNAME's email?

Hi ArS, it's working now as a program.
Still part of the thread.
Now I want to create a FM for this:
In my Function Group>TOP INCLUDE, I have
DATA: sender           TYPE REF TO if_sender_bcs,
             w_sender     TYPE ad_smtpadr.
In my FM code:
IMPORT Parameter:
    SENDER TYPE AD_SMTPADR
sender = cl_cam_address_bcs=>create_internet_address( w_sender ).
      CALL METHOD send_request->set_sender
        EXPORTING
          i_sender = sender.
SYNTAX ERROR: The field "SENDER" cannot be changed.

When I go to settings messages on my iPhone. 3GS how do I change the number where it says send and receive

Help me out

You can't change the phone number for send and receive with iMessage on an iPhone.
You can add or remove email addresses for send and receive with iMessage on an iPhone, but not the cell phone number.

SENDING AN EMAIL USING BCC AND RECIPIENT NAME APPEAR IN TO FIELD

I'm sending and email to several people using the BCC field. However, when the recipients receives the email, I want the recipient's name to appear in the TO field and the recipient not know the email was sent using the BCC. Right now, the
recipient knows it was sent BCC because their name is not appearing in the address fields

Hi Vinay,
You can use action defintions to send emails to your employee responsible.
for that pls check action profile 'Order_Messages' and within this, action definition
'ORDER_CONFIRMATION'.
Check in there. Partner funtion is assigned to it, in second level customizing and smart form to be mailed in third level customizing.
Prerequisite: emails should be maintained in BP master.
For your requirement you can do following settings:
In second level customizing(i.e. selecting the action definition and double click on the same)
Enter the partner funtion of Emp. responsible. in 'Partner Determination for the Action' Details. and check 'Partner Dependent'.
Secondly, in details for 'Action Determination and Action Merging' in 'Action Merging' details select 'Max. 1 Unprocessed Action for Each Action Definition.
Save the settings.
Schedule the actions using action scheduling.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

HT1277 When I send or receive an email on Mail for Mac, the computer stores the email address of either the sender or recipient.

When I send or receive an email on Mail for Mac, the computer stores the email address of either the sender or recipient.
The next time I send an email it fills in the name after typing a few letters.
Is there any way to get a complete list of the email addresses that are stored in this fashion.
LJCollingwood

Go to Mail > top menu bar > Window and select 'Previous recipients'.

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

Why can't I cut and paste email addresses when sending documents?

Why can't I cut and paste email addresses when sending files? I have to type them in each time...And it doesn't remember them for the future, as SendNow did.
Also, it seems that the message I type in is not kept, as it was with SendNow?
Thanks!

Hi drlaura,
You're correct on both counts--these features work differently Adobe Send than they do in Adobe SendNow.
If you're sending files from Adobe Reader, you can access your local Address Book, which should make entering email addresses easier. Please see: I’m trying to send a file from Adobe Reader, but I can’t access my computer’s address book to find my contacts. Why not?
Please let us know how it goes.
Best,
Sara

HT3228 I set up my work e-mail on iphone. When I try to send an e-mail, an error code says "Cannot Send Mail", "recipient rejected by server because it does not allow relaying". What does this mean and how do I correct it?

I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?

Get the correct mail server settings from your IT department.

How do i import outlook email addresses to iphone and send as a SMS text messages

How do i import outlook email addresses to iphone and send as a SMS text messages?

You can send a message through an email gateway so that it appears as a text on someone's phone. However, it's not their regular address. For example, for a Verizon customer, it would be [email protected] Perhaps that's what you're thinking of?

TS2755 My husband and I have iPhone 4S's. For some reason, my text messages show up on his phone. We share the Apple ID, and my settings are such that I send and receive from my phone number and email address. How do we correct this?

My husband and I both have iphone 4S's and for some reason he gets my text conversations w/ other people. We share the apple ID and I have my settings set to and from my phone # and email address. He is getting tired of being apart of text messages I am on. How do we remedy this?

Each of you need to have your own apple id's instead of sharing is the best way. But you can go to each phones settings, messages, send and recieve, and down to start new conversation from, and make sure each of you have your own email address with a check mark beside of it not the same address.

Address Rewriting - Sender and Recipient

Similar Messages

Maybe you are looking for