Address still in use; change to validity not allowed

Hello all,
I use the program BBP_VENDOR_SYNC to synchronize supplier data between SRM and R/3.
I noticed that if the supplier in SRM have a relation with a contact person (table but052) the address data can't be change.I can't change the "E" error type to "W" because it is written on the code. I also try OBMSG transaction.
Any idea?
Best Regards,
Nacho

Hi
I think you can change contact person data via manage business parner (WEB).
since he has a separate BP in SRM.
where did you setup w e for which messagge?
regards
muthu

Similar Messages

While changing location address error is : Address still in use

Hi All,
We are on SRM 4.0 with extended classic.
I want to correct, address of one of location. However while changing the address in transciation BP, system is giving error as : Address still in use; change to validity not allowed.
I changed first validity of references and then tried to correct address of location, but still it is giving same error.
Can anybody update me how to change address of location.
Thanks,
Sachin

Hi
In old version we do have WRK attribute. I will check it up.
what is the right Attribute value for PLANT and get back to you since you maintained via extended attribute ....right
I understand your problem
Hi Sachin do you have WRK attribute in that report.
if yopu were changed in r/3 plant text not try to do with BP.
regards
muthu

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com

HT2486 i created a group in address book and when wanted to use it it does not allow me to use it in email how do use a group name i created?

I created a group in address book and wanted to use it, it does not allow me to use it in email how do I use a group name i created?

How many in the group? Some ISP's have a restriction on that. Check with your ISP.

Address list error -- 5.7.1 Relaying not allowed

Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43:   Found: "$A$E$F$U%[email protected]"
17:09:37.43:   Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43:   Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43:   Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43:   Found: "$U%[email protected]"
17:09:37.43:   New mailbox: "abhishek.sen".
17:09:37.43:   New host: "extmail.xyz.com".
17:09:37.43:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43:   Checking reverse URL cache for: [email protected]
17:09:37.43:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48:   Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49:   URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49:   LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49:   Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53:   URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53:   URL resolution returned: [preferredlanguage] en
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53:   URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53:   URL resolution returned: [mail] [email protected]
17:09:37.54:       Attribute index: 0
17:09:37.54:       LDAP URL produced address [email protected]
17:09:37.54:   No more results to return
17:09:37.54:     Override postmaster: [email protected]
17:09:37.54:     Preferred language en
17:09:37.54:     Content return block limit now 700
17:09:37.54:   Mapped return address: [email protected]
17:09:37.54:   from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54:   18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54:   1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54:       - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54:   Found: "$A$E$F$U%[email protected]"
17:09:37.54:   Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54:   Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54:   Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54:   Found: "$U%[email protected]"
17:09:37.54:   New mailbox: "abhishek.sen".
17:09:37.54:   New host: "extmail.xyz.com".
17:09:37.54:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56:   Found: "$A$E$F$U%[email protected]"
17:09:37.57:   Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57:   Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59:   Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59:   Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59:   New mailbox: "bhanu.prasad".
17:09:37.59:   New host: "xyz.com".
17:09:37.59:   New route: "TCP-DAEMON".
17:09:37.59:   New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60:   - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60:   Found: "$A$E$F$U%[email protected]"
17:09:37.60:   Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60:   Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61:   Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61:   Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63:   New mailbox: "bhanu.prasad".
17:09:37.63:   New host: "xyz.com".
17:09:37.63:   New route: "TCP-DAEMON".
17:09:37.63:   New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63:   - found on channel tcp_local
17:09:37.63:   Rewrite rules result: [email protected]
17:09:37.63:   Checking reverse URL cache for: [email protected]
17:09:37.63:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65:   URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65:   Found: "$A$E$F$U%[email protected]"
17:09:37.65:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65:     old state = not checked.
17:09:37.65:     Domain check on xyz.com.
17:09:37.66:     Could not add domain result 0 to cache for xyz.com.
17:09:37.66:     new state = fail pending.
17:09:37.66:   Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66:   Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66:   Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66:   Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67:   Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67:   Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67:   New mailbox: "bhanu.prasad".
17:09:37.67:   New host: "xyz.com".
17:09:37.67:   New route: "TCP-DAEMON".
17:09:37.69:   New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69:   - found on channel tcp_local
address channel        = tcp_local
forward channel        = tcp_local
channel description    =
channel caption        =
channel user filter    =
dest channel filter    =
source channel filter =
channel flags #0       = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1       = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2       = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3       = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4       = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5       = TRUNCATESMTPLONGLINES
channel flags #6       = LOCALUSER REPORTNOTARY
channel flags #7       = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8       = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9       = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost            = extmail.xyz.com extmail.xyz.com
linelength             = 998
addrsperfile           = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name   = SMTP_POOL
channel queue 1 name   = SMTP_POOL
channel queue 2 name   = SMTP_POOL
channel queue 3 name   = SMTP_POOL
channel after params    =
channel daemon name    = 10.8.51.126
channel user name      =
urgentnotices          = 1 2 4 7
normalnotices          = 1 2 4 7
nonurgentnotices       = 1 2 4 7
channel rightslist ids =
local behavior flags   = %x0
expandchannel          =
notificationchannel    =
dispositionchannel     =
tlsswitchchannel       =
backward channel       = tcp_local
unique identifier      = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address   = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name                   =
mbox                   = bhanu.prasad
Extracted address action list:
    [email protected]
Extracted 733 address action list:
    [email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76:   Found: "$A$E$F$U%[email protected]"
17:09:37.76:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76:     old state = not checked.
17:09:37.76:     Domain check on xyz.com.
17:09:37.77:     Could not add domain result 0 to cache for xyz.com.
17:09:37.77:     new state = fail pending.
17:09:37.77:   Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77:   Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77:   Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77:   Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79:   Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79:   Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79:   New mailbox: "bhanu.prasad".
17:09:37.79:   New host: "xyz.com".
17:09:37.79:   New route: "TCP-DAEMON".
17:09:37.80:   New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80:   - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80:     Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81:   Found: "$A$E$F$U%[email protected]"
17:09:37.81:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81:     old state = not checked.
17:09:37.81:     Domain check on xyz.com.
17:09:37.81:     Could not add domain result 0 to cache for xyz.com.
17:09:37.81:     new state = fail pending.
17:09:37.81:   Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84:   Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84:   New mailbox: "bhanu.prasad".
17:09:37.84:   New host: "xyz.com".
17:09:37.84:   New route: "TCP-DAEMON".
17:09:37.84:   New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84:   - found on channel tcp_local
17:09:37.84:       - adding address [email protected] to headers.
17:09:37.86:       - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16:         - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16:   Copy estimate is 1
17:09:38.16:   Queue area size 73232902, temp area size 2067288
17:09:38.16:   36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16:   1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AM

i have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
   *|SMTP*|*|*|MAILER-DAEMON@*|*    $!$Y
   *|SMTP*|*|*|LISTSERVE*@|*        $!$Y
   *|SMTP*|*|*|majordomo@*|*        $!$Y
   *|SMTP*|*|*|*-request@*|*        $!$Y
   *|SMTP*|*|*|*-owner@*|*          $!$Y
   *|SMTP*|*|*|owner-*@*|*          $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance.

Adobe Acrobat 7: Can not insert pages, changing the document: Not Allowed, but Security Method set t

In Adobe 7, I need to add some pdf pages to the end of a document, but the insert pages (as well as all other items under Document> are greyed out.
On the document properties\ Security> the document restrictions summary says "Changing the Document: Not Allowed", but the Security Method in the drop down above is set to "No Security"
Thanks!

If there are form fields, then whoever added them probably used the forms menu, not the Acrobat form fields. Thus the PDF was converted to Designer and you are out of luck. The FORMS button found in various places in Acrobat 7 and latter takes you to Designer, not the Acrobat form tools. The latter are located in the tools menu.

Transfer to R/3 using mixed periodicities is not allowed

Hi,
We are in the process of implementing DP for one of our clients,
We are facing the following problem, while releasing the Demand ( as PIR) to SAP R/3.
Transfer to R/3 using mixed periodicities is not allowed
We have maintained below mentioned steps;
1.Periodicities of Planning area maintained only weekly buckets.
2. Maintain Transfer Profile (SAPAP/MC8U)
3. Define activities for Mass Processing (SAPAPO/MC8T)
4. Create Demand Planning for Background job
(SAPAPO/MC8D)
5. Schedule demand planning in Background (SAPAPO/MC8G)
6. Through SM37 I checked the Spool List.*Error: Transfer to
R/3 using mixed periodicities is not allowed*
Kindly request if anyone knows provide solution.
Regards
Sadasivam R K

I think you can have only month, quarter and year in your storage bucket profile when you release forecast to ECC.
Anything lesser than that will give you an error when you release forecast to ECC.
If you want to send forecasts in weekly buckets, then you need to maintain the period split profile (Transaction /SAPAPO/SDP_SPLIT - Maintain Period Split Profile ) and assign this profile to the transfer profile.

An entry using this combination is not allowed

Hi, everyone.
I created 1asset, posted value and run depreciation. After that, I use t-code F-92 to retirement. When I choose asset to retire, the system has error: An entry using this combination is not allowed, .
Can u help me configure this error?
Thanks so much.

I have same problem with Asset having its threshold value 5% .
system has stopped to calculate depreciation value last year for this asset
now we are selling this asset to customer. but during entry in F-92 , system shows error message
An entry using this combination is not allowed (see long text)
Message no. AA338
Diagnosis
You have made contradictory entries regarding the determination of values.
The possible entries are as follows:
- You want to post a complete retirement
=> Set the indicator for complete retirement, do not make any
     other entries
- You want to post a partial retirement
=> Enter either the amount or the appropriate percentage
     rate. If quantity updating is used for the asset, you can
     also enter a quantity.
=> Enter only the quantity being retired (this is only possible if you
     are not dealing with a generic retirement, and quantity
     updating is used for the asset).
Procedure
Check your entries.
i have try all fields one by one and also to gather, but system shows same error message for every selection.
complete retirement
amount
qty
percentage.
if i am not selecting any one of these fields then system force me to select any one field by error message
please help to resolve it
Regards,
Riten Patel

New thunderbird won't send messages saying some of my addresses I've used for years are not right syntax but they are.

Setting up different computer since lightning strike took out my ethernet (but not much else). Using Mint Linux 13. New setup on this computer with all the latest updates including Thunderbird 31.
Have imported my old addresses that I've been sending to for years but this new t-bird will not allow some emails saying they are not proper sytax when they are. Nothing has changed on the addresses, just Thunderbird has changed. Because of these few it refuses, it won't sent ANY emails now except for replies. Replies using the very same addresses go through with no problem. Lately it finds just one address it refuses but when I take that one out (have to start over now - won't allow me to delete) then it comes up with a whole other list and DOES NOT SEND ANYTHING. This is damned frustrating, to be frank.

What is the exact error message?

Recently downloaded new drivers for C6280 and still cannot use printer it will not finish setting up

have been using acer note for a year with my hp C6280 printer no problems, but switched printer off couple of days ago and now cannot connect to acer note anymore, I downloaded the recommended drivers but the process will not complete,
can any one help with this.. thanks mags

Hi @bonniesox,
Welcome to the HP Forums!
I noticed that you downloaded the new drivers for your HP Photosmart c6280, but you still cannot use it, due to the fact the setup will not finish. I am happy to help you with this installation issue!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Ethernet, or USB.
If the printer is able to make copies.
In the meantime, if you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Changing The Document: Not Allowed

Hi,
Kindly refer to this link - https://forums.adobe.com/thread/1565222 regarding with our issue on PDF files created using Acrobat Pro 7. When we open the files using higher versions the Changing the Documents and Document Assembly always marked as Not Allowed.
Thanks

Attention: Acrobat Product EXPERT (Adobe Support HelpDesk)
PLEASE Reply

PPOMW - changes in production not allowed

Hi,
We would like to assign a cic-profil to a user in transaction PPOMW in production environment. After saving the changes the error messages u201Cmandant 100 changes not allowedu201D occurs.
Our consultants told us, that we have to change to status of the production environment in SCC4 before changing profiles in PPOMW.
In my opinion this solution is not useful.
Is there another solution or workaround ?
Kind regards,
Andreas Ament

Hi
Did you have access previously?
It is likely that the problem comes from the automatic transport connection configuration in your productive system. You have more information on this regard in notes 208746, 163897 and 33582.
Please check the following switches in table T77S0:
TRSP ADMIN       (Deactivate automatic transport in infotype 0001)
TRSP CORR        (Transport Switch (X = No Transport))
Please check the result with both switches set to 'X' (= no transport). After this change you should not be getting any error message when saving.
Regarding this parameter change in T77S0 view, please take into account that you have two possibilities: you might want to change this in all the systems, or you might want instead to change these values just in the productive system.
a) For the first option it will be enough to set these "X" in the development system and then transport the corresponding request
   with this change to the quality and production systems.
b) For the second option, you can allow changes in T77S0 view in the productive and pre-productive system, so you can mantain a different value there compared to development and quality.
      1- enter SOBJ transaction
      2- search T77S0 object
      3- double click on it
      4- activate the current settings flag
Regards,
Eddie

Changing Facebook User Not Allowed? Oops.

I decided to try the Facebook Publishing "feature". Unfortunately I did not notice when I did the authorization that the browser was pointing to an OLD Facebook account. Now, (after deauthorizing that account) I can't authorize the correct account. I get the message:
Changing the facebook user for a saved connection is not allowed
Is there any way around this?
Gee, one little mistake and I'm blocked for life?
Steve

The answer appears to be the following:
Right Click on the original Facebook Publish Service and select "Create Another Publish Service via Facebook..."
Establish your connection to Facebook, giving this one a new name.
Right Click on the original Facebook Publish Service and select "Delete Publish Service"
Done.
Not exactly user friendly! But, it works. ;-)
Steve

Minimised Hotmail tab at botom of PC screen displays the email address I am using and I do not wish it to do so for privacy reasons

When I have to quickly minimise my e-mail account the tab shows in the bottom tool-bar of the screen but still displays the email address I am trying to hide. I wish it would not do this. In previous versions it just showed 'Hotmail' e.g. now it shows 'Hotmail: woody@ hotmail.com (e.g) for all to read if they are passing by or checking up on me!

This is caused by the changes Microsoft made to Hotmail. I could not find any setting s in Hotmail to change what was displayed. One option you can try is use the [https://addons.mozilla.org/en-US/firefox/addon/2987/ TabRenamizer] add-on.

Account email changed but will not allow use

I changed my account email and veryfied it. Now, it says I have not verified it, but when I click yes for instructions it says I have verified it. HELP!!!!

Use the email form here > Apple - Support - iTunes Store - Contact Us
Tunes Store & Mac App Store: About your Apple ID and password

Address still in use; change to validity not allowed

Similar Messages

Maybe you are looking for