Address verfication and internet

Can someone please help??? We have been trying to get internet since november.  Everyone on my street has it, a new house going up is getting it.  I even chased the poor tech down the street.  He said to keep calling.  Which I have, along with chat email tweet ect.  I keep getting the run around.  Last I was told that Im on a priorty list for someone to check my address.  What should I do.  The cell signal is awful we cant get a booster with out internet..  UGH

Hi Kristen,
UPS also provides this and there are third party controls that have implmented it.  It is free to use, but (the last I knew) you had to agree to display only UPS rates on your site if you were going to use it.
Having said that, it would take a significant amount of work to implement this.  The shipping calculations are tightly bound to the entire checkout and you would need to make modifications to the cart, billing, shipping and verify pages.

Similar Messages

  • Problem with ACE and Internet Explorer 8

    I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
    exactly:
    ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
    If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
    I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
    Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
    Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
    Please help.

    Hi Kazik,
    Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
    I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
    A showtech from the Admin context of the ACE
    A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
    If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
    Regards
    Daniel

  • Client dns and internet connection

    Hi,
    Running 10.5.5 Server with basic DNS for inter clients to access AFP/SMB and Wiki services via Open Directory. IP address is 192.168.1.10
    Clients currently receive internet via DHCP from a router and Network preferences autofills DNS and search domains with router address 192.168.1.1 and RP614v4 respectively.
    If I add the server IP and search domain, I can't see the server via DNS name unless I reverse the order in the fields (192.168.1.10 and ######.private). However this turns the internet connection to snail pace.
    How can I get the DNS to work for both the internal server and internet connection?
    Thanks,
    Joel.

    If your DNS server is running correctly, there's no reason why it should resolve any slower than the router. The fact you're mentioning it implies that the delay is significant so I'll guess that your clients are requesting an address from your server, but that's timing out so they're falling back to the router before proceeding.
    You should check your DNS server to make sure it's set to be recursive (so it answers queries for non-local domains, too). That way the clients can get all lookups from your server and you should be good to go.

  • Syncing Google Gmail Contacts with Address Book and iPhone Contacts

    Can anyone recommend a good way to sync Google Gmail Contacts with the Address Book on the Mac and with Contacts on the iPhone?
    I tried using ABGMerge, but could not get it to work so and am looking for other options. Thanks.
     PowerBook G4, Macintosh 512K     iPod nano (2nd Gen 8GB), iPhone (8GB)

    The Plaxo 3 non-pubic beta application currently supports only Mozilla and FireFox 1.5 and Internet Explorer 6. Safari support, and support for updated OS X thrid-party browsers, has not yet been released. To say that there are some anomalies and visual artifacts with Safari 2, would be an understatement. But, then, I often find this to be the case with beta—particularly, pre-public beta, software.
    The current release—build 356—supports these 'sync points:'
    • Mac OS X through a System Preferences pane
    • AOL and AIM
    • LinkedIn
    • mobile access
    • MSN and WIndows Live
    • Outlook
    • Outlook Express
    • Windows Mail
    • Yahoo
    It does not yet support Google. Or, not yet reliably or completely. The little 'hippo' that pops up periodically in the beta says, "Google Calendar Sync has been temporarily disabled. We are working diligently to resolve the problem. Sorry for the inconvenience."
    The verdict at the moment: contact synchronization performs as it always has with Plaxo. Calendar synchronization is clearly not yet ready for prime-time, even to the Plaxo 3 web interface itself.

  • Phone line and Internet cut off overnight

    Please can this be looked into immediately.
    Our phone line and internet have both been cut off at 03:00am this morning,
    I obviously cannot phone you guys to sort this so posting on here is my only resort.
    The hub is still showing a blue light and the phone says 'check phone line'
    But neither are actually working,
    I need ASAP with this.

    Welcome to this forum.
    This is a customer to customer forum only,
    This is where customers help each other get the most out of BT products & services.
    Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
    If you need direct help from BT or have an urgent problem please use this linkContact Us.
    This is a public forum which can be viewed worldwide, so please do not post any personal information, especially phone numbers, account numbers, fault numbers, address information or email addresses, as this could be used to impersonate you.
    Thanks
    You can ring 0800 800 150 to report faults.
    Also visit https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=31
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • OSX 10.6.8 and Internet Sharing to Ethernet

    I am trying to set up Internet Sharing so that I can connect my old MacBook Pro running 10.6.8 via ethernet to another device - I'm trying with xbox360 and Sony Blu Ray (BPD-S185) (for diversity of devices - I used to have it working on my xbox, but really want it working with the blu ray player but the network status feedback is better for problem solving on the xbox!).
    I have my MBP connected to my home network over Airport which has the following details:
    - IP: 192.168.1.5
    - Router IP: 192.168.1.1
    I have then enabled Internet Sharing through System Preferences to share my Airport connection to my Ethernet connection.
    I have the following Ethernet settings:
    - Configure IPv4: Using DHCP with manual address
    - (Ethernet) IP address: 192.168.2.1
    - Subnet Mask: (blank - not user accessable, changes to 255.255.255.0 when xbox turned on)
    - Router: (blank - not user accessable)
    - DNS Server: 192.168.1.1
    - Search Domains: (left blank)
    On the xbox I've set the network settings to:
    - IP: 192.168.2.2
    - Subnet: 255.255.255.0
    - Gateway: 192.168.2.1
    - Primary DNS: 192.168.1.1
    - Secondary DNS: 192.168.2.1
    When I then select 'Test my Xbox Live Connection'  it takes a while, the Network status shows 'Connected', however The Internet Failed.  I am informed that the 'Test Failed' and 'more information' tells me I have an 'Internet Error' with the following Status codes:
    W: 0000-000B
    X: 0000-000D
    Y: 0000-0000
    Z: 0000-0000
    ID0004-000
    L: 0015-10F1
    Q: 8007-0435
    T: Wired
    A: 192.168.2.2/255.255.255.0
    G: 192.168.2.1
    D: 192.168.1.1/192.168.2.1
    So, it looks as though the problem lies with the MBP and internet sharing on OSX.  I have extra suspicions that this is the problem, as connecting my Blu Ray player to my MBP via ethernet I also get a successful connection to the network, but no internet access.
    Pleeeeease can someone help?!?!  This is driving me nuts - a couple of years ago I had internet sharing working to let my xbox connect to the internet, so what's happened in the last few years to mean this won't work?

    If you want to back it up there, use the Disk Utility to create a disk image of it.
    If you want to import its contents to iMovie, iTunes, or elsewhere, use MPEG Streamclip and Apple's MPEG-2 playback component to convert the VOB files on it to a different format.
    (65437)

  • Accessing Home Hub 4 with windows 8.1 and Internet...

    Hello
    I can no longer access my home hub manager wirelessly running windows 8.1 and Internet Explorer 11 from my toshiba laptop by either typing in the IP address or by http://bthomehub.home/. I can still access it by either method from a laptop running windows XP. I have Infinity and Home Hub 4a. This problem has arose recently and I did upgrade from windows 8 last week so could this be the problem. Has anyone any suggestions?
    Regards
    Adrian
    Solved!
    Go to Solution.

    Seems to be a Network Adapter problem for most people, and usually updating the driver works.
    If you have just installed 8.1/8.1 pro, you will typically need to install your motherboard and other driver software. After you have done this, most people can access the internet, but have problems with the bt hub ip/url access link.
    To update the Network Adapter(s) use the following steps:
    1. search for Device Manager, and open it up
    2. Select/expand Network adapters, and the adapter(s) on your machine should show up.
    3. Right click on the adapter(s) that appear and select 'Update Driver Software'
    4. It should come up with 2 options - select 'Browse my computer for driver software'
    5. The next screen should come up with the default location for your machine, so just click the next button on the bottom right of this window.
    6. Your network adapter(s) will appear, and just select 'update driver software' and the latest version will be installed.
    7. That should fix most problems right away - if not, your machine (including hub and router) may need switched off and back on.
    I can't guarantee it will fix every problem, but the most common problem seems to be that the latest network adapter drivers needs a manual update after installing 8.1/8.1 pro, even after you install your motherboard / ethernet drivers.
    If you still experience problems accessing bt hub or internet, you can try this additional step:
    1. On your keyboard press Start + X keys (or microsoft logo key + X)
    2. This should open up system options dialogue box at the bottom left of your screen.
    3. Select Command Prompt (Admin) option.
    4. In command screen (old DOS screen) type the following: ipconfig /release (there is a space between config and /)
    5. This will release your ip address back into the network and cut your connection (don't worry)
    6. Whilst still in command screen, flush the dns cache - type: ipconfig /flushdns (space here again also)
    7. type exit to get out of command screen.
    8. Switch off your pc, and switch it off at the wall, also switch off router & bthub.
    9. Wait a few mins before flicking switches back on at the wall only - dont switch on pc yet - wait a min or so then switch on pc.
    10. You may need to run through the updating network adapter drivers again from the steps at the top - although this should not be needed.

  • Bit of a strange question regarding security and internet connection

    This is a bit of an odd question so bear with me for a moment.
    I sold my old G4 to someone I didn't know yesterday. While he was looking at it to make sure it was working I allowed him to plug my ethernet cable in (connected to both a netgear router and a cable modem) and go online to install an application on the computer he was buying. It did't take long and I didn't actually see what he installed but after he left and I plugged back in to my mac pro, my internet connection started suffering. It started by being very slow and then timing out with servers. I reset the modem and even bypassed the router but the connection did not improve and eventually I could only get a self assigned IP address with no internet, although the modem appeared to be fine.
    Aside from finding my I.P. address at my location, is there anything else he could have compomised security wise, either in the name of harvesting some kind of info or just creating a problem in the cable network when I let him use my connection on the g4?
    I think that most likely I'm being a little paranoid but the timing of this is a bit strange. It literally went down hill just after he left.
    Today the cable company is reporting a wider internet outage than just me but I just though I'd throw it out there to see if there are any security wholes exploitable when someone uses your internet connection (I would think and hope that there are not).
    thanks a bunch

    Well, in the closing the stable door approach it is a good idea to do a complete erase and install when selling any computer. There's lots of references to this and even one about removing a certain file so when they start up they get the brand new Mac greeting window. If you do not erase the drive using the secure erase feature in Disk Utility then with an $80 investment plus an empty spare drive the purchaser can likely recover any files you had on the computer recently if they consider it worth the effort.
    I suspect the internet issue is not related to this, especially since your ISP commented about problems.

  • I have 2 lan connections, 1 connect to local network server and other to internet, how do i configure firefox to open website on my local network connection and internet also

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/812283''
    I have 2 local area connections in my computer, one connects to local office network server and another to the internet. when i use firefox i want to configure it to use it to connect to my local office network server website which has address as http://199.123.9.1 and also internet web address simultaneously,

    I found the solution, myself, you need to go to network settings and then select manual proxy setting and provide the ip address of the internet server . that's all
    "it is not OS setting up problem, around DNS and routing Problems." as stated by you,
    anyway thanks.

  • Oracle 10g and internet connection

    I recently installed a program which uses and installed the Oracle 10g database, but cannot run the database while I have an internet connection. If I disable my internet, I can run Oracle and my program. If I am connected to the internet and run the program it pops up this box:
    DATABASE LOGIN FAILED
    +... due to Oracle condition:+
    ORA-12541: TNS:no listener
    OK
    When I click Ok, it pops up a new box with 2 tabs: one asking for me to:
    Choose a (named database)
    This installation stores data in a named Oracle database.
    Since you may have several such databases, please select the name of
    your desired database from the list below.
    Note: If you are connecting to a local, single-user database, it may not have
    a name, or its name may not work.  In that case, you would need to choose
    the entry "<<always use default>>".
    There is a drop down box with 3 choices for the Database to use for this installation: XE, ORACLR_CONNECTION_DATA, and <<always use default>>
    The other tab is:
    Describe Privileged Account
    For maintenance purposes, this system also needs the name and password of
    a privileged Oracle user account.  It uses this privileged account
    only as needed, for various setup and maintenance tasks, such as
    o     creating the application's user account,
    o     providing it with storage space,
    o     providing backup/restore services,
    o     applying software updates.
    Please enter the privileged account's name and password below.
    If you do not know the account's name and password, please contact your
    Oracle database administrator (DBA).
    And it is asking for a user name and password. The Oracle help said that info should have been displayed somewhere during the Oracle installation process, but being as though I installed another program that did the Oracle, I don't think I ever saw it.
    I think it may matter:
    XP Pro SP 3
    2.4 GHz processor
    3 GB RAM
    To summarize; is there a way to run the Oracle database and my internet connection?
    Finally, I apologize for likely not providing all you would need to answer my question, I will provide anything else I can if it will help.
    Thanks
    gj

    Hi, thanks for the quick response.
    I went through the steps in the loopback adapter installation link you provided and have added a loopback adapter. When I do the ipconfig/all I get the following for the loopback adapter:
    Ethernet adapter Local Area Connection 4:
    Connection-specific DNS Suffix.....:
    Description...............................: Microsoft Loopback Adapter
    Dhcp Enabled...........................: No
    IP Address...............................: 192.168.25.129
    Subnet Mask............................: 255.255.255.0
    Default Gateway.......................:
    So it appears that is good to go. The issue still persists. Below is system information and Oracle information.
    System:
    Microsoft XP
    Professional
    Version 2002
    Service Pack 3
    Registered to:
    Me
    My company
    serial #
    Computer:
    Intel(R) Core (TM) i5 CPU
    M 520 @ 2.40 GHz
    2.39 GHz, 2.92 GB of RAM
    Physical Address Extension
    And Oracle is:
    Oracle Database 10g Release 2 (10.2.0.1) Express Edition for Microsoft Windows

  • Transfer of the account --- I lost my e-mail and Internet connection

    I wanted to transfer our residential DSL account that was under my husband's name to me. They told me that I could keep my old Verizone-mail account, but when they did the transfer, my e-mail account got disconnected. Moreover, presumably since I have the same e-mail address as my 'new' address, I can't seemto activate my internet. Now I've been without an e-mail and Internet for the last several days. I called the 1-800 number > 10 times, spent hours, and still no one fixed it. This is crazy!!! Can anyone help?

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • Flash Player 10.3 and Internet Explorer 9 update and workarounds

    Hello Flash Player community,
    We are tracking the issues being reported on Flash Player 10.3.181.14 and Internet Explorer 9 and actively investigating them.  Users are reporting that Flash content is being displayed in the upper left corner of the screen.  We want to give those who are encountering these issues an update.
    First, we apologize to everyone affected.  We know you count on Flash Player as an integral component of the web and we strive for high quality and performance in each release.  We are actively looking into the root cause of this issue.  Thanks to many of you submitting information via email and our online bug database, we now have some solid leads we are pursuing.
    Flash Player 10 and later can use your system’s graphics hardware to accelerate video decoding, and can also accelerate video presentation on some sites. Starting with Flash Player 10.2, Flash Player will also take advantage of hardware accelerated graphics in Internet Explorer 9, utilizing hardware rendering surfaces to improve graphics performance.
    With Flash Player 10.3.181.14, reports indicate that systems with Intel HD Graphics adapters running Internet Explorer 9 are the only systems impacted by this particular bug.  If you are encountering this issue and have a different configuration we'd love to hear from you.  Please review the instructions on this page for details on generating the information we'll need for further investigation.
    Solution #1
    Adobe has officially released Flash Player 10.3.181.16 for Internet Explorer to address the graphical issues introduced in 10.3.181.14.  You can get this release by visiting our official download page, directly downloading and running the installer file, or using the Flash Player auto update mechanism.
    After installing, we recommend you re-enable hardware acceleration if you had it previously disabled.  We also recommend you clear your browser cache and restart your system.
    If you continue to encounter issues, please create a new thread and we'll do our best to investigate further.
    Solution #2
    On some systems, you may be able to resolve this issue by updating the Intel HD Graphics drivers. It has been reported that driver versions 8.15.10.2361 and above do not exhibit this bug. Unfortunately, some systems might require updates directly from your system manufacturer. We’re working with system manufacturers to make sure they include the latest drivers in future releases.
    Solution #3
    You can disable hardware acceleration in Internet Explorer 9 using the instructions on this page. Please note that you should re-enable hardware acceleration once this problem has been resolved to enjoy the full benefits of hardware acceleration.
    Thank you,
    The Flash Player team
    Update 5/20/11 - We've temporarily disabled the automatic update notification for Flash Player 10.3 and Internet Explorer.  We're making progress on a fix and hope to have a new version available next week.
    Update 5/24/11 - Added link to the 10.3.181.15 test update
    Update 5/27/11 - Added instructions for post install of 10.3.181.15
    Update 5/31/11 - Updated thread with the official 10.3.181.16 announcement

    FOR THOSE RUNNING IE9 ON WINDOWS 7 AND HAVE INSTALLED THE AUTOMATIC UPDATE FOR ADOBE FLASH PLAYER 10.3 - TAKE THE FOLLOWING STEPS:
    Open IE9 Browser window > Click on "Tools" > Click on "Internet Options" > Selct the "Advanced" Tab > Turn on/Click the "Use software rendering instead of GPU rendering" > Click "Apply" > Click "OK" > Shut down and then restart your IE9 browser.
    THIS WILL BE A TEMPORARY FIX FOR ANY ISSUES YOU MAY HAVE WITH THE CONSTANT FLOOD OF FLASHING ADS AND THE LIKE UNTIL A PATCH IS MADE AVAILABLE FOR THIS UPDATE.
    OTHER QUICK FIXES WOULD INCLUDE:
    1) UN-INSTALLING 10.3 AND RE-DOWNLOADING AND INSTALLING 10.2 FOR THE TIME BEING. **BE SURE TO AVOID RE-INSTALLING THE AUTOMATIC UPDATE OF 10.3 AGAIN**
    2) DOWNLOADING AND INSTALLING "MOZILLA FIREFOX" AND USING IT AS YOUR WEB BROWSER!!

  • Importing address book and emails from a PC to a Mac

    I would like to get my address book contents from Outlook Express into my Mac Pro's Mail address book.
    Is there some easy way to do this? I'm on OSX 1.5.2.
    Also, is it possible to copy over my sent items folder from Outlook Express into the Mac?
    I have a lot of saved emails in OE that I will need to have access to from the Mac, and I would also like to avoid having to manually redo my entire address book.
    Are Safari and Mail the best apps to use on a Mac for email and internet, or should I install something else?
    Should I just forget the whole thing and install Win XP on the Mac so that I can use my OE stuff?
    Thanks a lot for any advice.

    I had no problems by installing Thunderbird on my PC first, and then importing all of my Outlook data into Thunderbird. I then located and made a copy of the Thunderbird Mail file, which I moved to my Mac. I installed Thunderbird on my Mac, and imported the file I moved from the PC. I was then able to use the resulting mail file in Mac's Mail.
    It's been several months ago, and my details might not be exact...however, a little bit of messing with it will definitely get the job done. I had about 10 years of data to move.
    Regarding contacts, I think I exported a comma delimited file from the PC, which I was able to import into Mac's Address book....it wasn't difficult. Good luck! Bill

  • IronPort and Internet

    I have a remote office and setup site to site vpn to HQ using ASA for both location.  All data traffic and internet browser on the VPN link back to HQ.
    Everything is working fine and strange thing happened that there are 2 users can not connect to internet.  If I bypass these 2 users from Ironport
    then their internet are working fine.  The IronPort setup as transparent and wccp configure on the ASA here in HQ.
    If I put those users back on the access list on the ASA for WSA then their internet browser are connecting but no error no webpage display.
    Keep getting waiting for www.yahoo.com like hours glass.  Turn on the access log and saw the connection established without any deny on the log.
    Anyone has any idea?
    Thank you.

    You said only two users has the problem, does that mean other users on same remote subnet through the vpn, also configured for WCCP on the main office ASA and redirected to the WSA is working fine? If other users work fine, are the two users using the same identity configured on the WSA, and going through the same access policy?
    You can also check the access logs on the WSA for the none working user, and the working user to see the difference in logs, if going through the same internet url. Guide for access logs on WSA here http://tinyurl.com/6ekeec
    Otherwise you will need to trace where the packets from the client is being lost going to the internet.
    Packet captures for traffic of the client on ASA and WSA will possibly need to be done to find out.
    Some good info on forum for ASA packet capture her
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    https://supportforums.cisco.com/docs/DOC-1222
    I suggest doing it on the interface facing the WSA, and filter on the client ip address.
    Capture on WSA here http://tinyurl.com/g4qxy
    I suggest doing the capture on the interface facing the ASA, and filter on the client ip address.
    I hope this helps you get further on your troubleshooting.
    Regards,

  • How can address book and local folders stored on JunoInternet program be imported into Thunderbird?

    Have been using Juno for email for years. Juno Internet program on my PC locally stores address book and saved emails in local folders. Want to switch to Thunderbird for emails. Can address book and local folders stored via Juno program be copied to Thunderbird? If so, how, plz.

    If you are installing TB on the same computer as the Juno mail, the installation / start-up process offers the choice to import from another mail program.

Maybe you are looking for