Addressbook: how to copy group members into email?

I want to copy the names/emails of one of the groups from my addressbook into the body of an email to share them. Advice?

Hi ltiefer,
Welcome to Apple Discussions.
You've stumbled into the AppleWorks forum, dedicated to questions about the productivity application AppleWorks.
As your question concerns moving information fom Address Book to an email massage (probably using Mail), a better location for it would be the Mail and Address Book section of the Mac OS X v10.5 section of Discussions.
Regards,
Barry

Similar Messages

  • How to copy a report into my namespace

    how to copy a report into my namespace as said in this blog....
    /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages

    how to copy it my namespace
    I didn't get what exactly you mean?
    If you run any interface you will find its details in SXMB_MONI.
    This report will pickup the data from Moni and resend the message. So its not Interface specific.
    You copy the report from SE38 and try.
    Gaurav Jain
    Reward Points if answer is helpful

  • Hi, I am user iPad and I do not know how can attach a file into email e.g. CV.  Thanks

    Hi,
    I am user iPad and I do not know how can attach a file into email e.g. CV. 
    Thanks

    You attach files within the app that creates the file or within the app that the file is saved. For example you email photos from within  the Photos App itself. Typically there will be an action icon within the app - an arrow icon many times - you tap on that to bring other options like Share - then Email.
    Attachments must be mailed within the apps themselves.

  • How to copy actual data into current forecast period

    Hi gurus.
    I need your guidance on how to copy actual data into current forecast period.
    This is my case. Let's say I have the following figures for my actuals:
    January 2007 Actual = $110,000.
    February 2007 Actual = $120,000.
    March 2007 Actual = $80,000.
    April 2007 Actual = $100,000.
    Now, my user want to choose any month as the basis for her forecast for the remaining periods. Let's say, she wanted to choose April 2007 Actual as the basis for the remaining forecast periods, so I should be able to display the following figures in my planning folder:
    May 2007 Forecast = $100,000.
    June 2007 Forecast = $100,000.
    July 2007 Forecast = $100,000.
    August 2007 Forecast = $100,000.
    September 2007 Forecast = $100,000.
    October 2007 Forecast = $100,000.
    November 2007 Forecast = $100,000.
    December 2007 Forecast = $100,000.
    Can someone guide me on how to do that?
    Points will be given to good and best answers.
    Thanks.

    Hi Fulham,
    Technical answer:
    First, you need to allow your user to indicate wich month is the reference for the copy. I suggest you to add a new key figure in your actual layout (a 'customizing' layout) that your user will use as a flag:
    January 2007 Actual = $110,000
    January 2007 Flag = 0
    February 2007 Actual = $120,000
    February 2007 Flag = 0
    March 2007 Actual = $80,000
    March 2007 Flag = 0
    April 2007 Actual = $100,000
    April 2007 <b>Flag = 1</b>
    <i>(Help to a fox or an abap exit you can check that only one month is 'flagged')</i>
    Then, in the corresponding level for the data input, you use a function exit in Abap, which will:
    - read the previous customizing layout help to API_SEMBPS_GETDATA so you can get the flagged month and its actual amount ($100,000)
    - generate the news rows into the table XTH_DATA which will be automatically posted in the level with the actual amount
    Is that clear?
    Regards,

  • How to send group text or emails from established groups in contacts

    I have numerous groups I want to sent both text and emails to.  These groups are in my contact and the contact recognize the group.  How do I get those group populated into an email or text so I do not have to enter them 1by 1 time and again?

    can you not just type in all of your contacts names?? or are there too many

  • How to copy exitsitng extracter into another new extracter?

    Hello,
    Please some one can tel me how to copy the existing  extracter into another new extracter.
    I have requirment as below
    Currect me if i am wrong ,need to enhance the existing extracter and add some new fields,and need to include some masterdata filds also to it.
    For master data i am going to do write routines at Transfermation so that no need to include in my exter for those filds to extracter.
    Please some one guide me in this scenario.
    Chrs

    Hi,
    you do not have to copy the extractor, you can enhance it with fields and fill them via enhancement coding --> rsa6.
    If you want to copy it, you need to check what kind of extractor you have. Is it a function module or just a table extractor.
    for fm: copy the function module via se37 and copy the extract structure via se11. Add your enhancements in the copied structures and coding. Create a new datasource with rso2.
    for table extractor: create a view adding the additionally needed fields. create a new ds with rso2. Surely you need to add some coding in the relevant enhancement.
    regards
    Siggi

  • How to Load new members into existing dimensions in Planning 9.3.1

    Hi,
    I am not having HAL, and is it possible to load members into existing dimensions of a newly created planning application - for example under accounts I want to add around 100 members - how to add them using a flat file without using HAL - is there anyother way out.
    Can we use workspace->Navigate ->administer->Dimention Library
    Create a new dimension here add that to Accounts ?? help me in this

    John,
    Can you suggest me the syntax to be used for the below example to create a flat file
    the Hiearchy I have(for accounts and entity)
    current:
    Accounts
    I need t have the following children under Accounts
    Child of Accounts:Assets,alias(assets of x company)
    Child of Asssets: 101, alias(asset1),Datastorage("store"), base currency("USD"),aggregation(+),Plantype("plan1")
    Regards,

  • How to place grouped items into another object with content collector tool?

    Is it possible to paste a group into another object (i.e. frame) by using the Content Collector Tool while linking the content?  Paste Into is either deselected or possibly whatever was last saved to the clipboard ends up inserting. I was able to place grouped, linked content into a frame (and later applied a scrollable frame overlay to it) once or twice but can't seem to repeat. Tried selecting the object being pasted into.. holding shift, holding ctrl, all kinds of options, just very confused now.

    Found a potential work-around (I think....).
    1. Use the Content Collector tool and select grouped objects
    2. Select Content Placer tool, check "Create Link"
    3. Place grouped object into doc/onto page with Content Placer tool
    4. Copy placed grouped objects
    5. Paste into frame that will be scrollable later
    For now it seems like the link still works

  • How to copy one schema into another

    I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
    I have a dmp file of source-schema (created daily with expdp by our backup schedule).
    Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
    The dmp file was created with:
    expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    Create the copy on dest-schema with:
    impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    (dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
    If this approach is not feasible, kindly suggest me an alternative.
    Thank you.
    Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)

    Thank you both. Dean, I've made a note of your proposed command. May use it next time.
    In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
    First I ran these command logged in as SYS
    GRANT Import Full Database TO dest-schema;
    GRANT Create Any Directory TO dest-schema;
    GRANT Unlimited Tablespace TO dest-schema;
    impdp
    dest-schema/pwd
    DIRECTORY=dmpdir
    DUMPFILE=myproject.dmp
    REMAP_SCHEMA=source-schema:dest-schema
    TABLE_EXISTS_ACTION=REPLACE
    LOGFILE=implog.log
    There were some errors though. The import process complained about constraints referencing non-existent primary keys.
    It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
    - are not part of the DUMP file
    or
    - are in the DUMP file but skipped during import
    Don't know if this is a bug or by design behavior.

  • How to model groups/members that are many to many using logical dimension?

    This is the RPD support for cascading prompts in BI Answers. In our data model, we have agentgroups and agents, connected by an agentgroupbridge. Since agents can be in more than one group, the relationship is many:many. We'd like to be able to include both agentgroups and agents as input prompts. When a user selects one or more of the agentgroups in a drop-down selection list, only the agents in the agentgroup(s) selected appear in the agents' drop-down selection list.
    agentgroup[full list of agentgroups] => make agentgroup selection => agents[only those agents in selected groups]
    We plan to combine agentgroups and the bridge into a view, so that there would only be one step from the group to the members.
    Can this be done in an OBI RPD? Is it implementable via logical dimension with hierarchy? If so, parent-child or level-based?
    Thanks!

    Hi thr,
    Need to replicate it back in local to check how we can do contraint here with multiple selection of agentgroups in prompts. For sure only a hierarchy in RPD would be able to do this....
    Incase you just want to try with one value selected in agentgroups then you can go for presentation variable.
    Prompt1
    - agentgroups column which set presntation variable 'pv_agtgrp'
    Prompt2
    - Show SQL for agentscolumn.bridgetable (pull bridgetable in presentation layer here) and the SQL would be
    SELECT agentscolumn.bridgetable from bridgetable.SubjectArea where agentgroups.bridgetable = '@{pv_agtgrp}'. This would also populate a new presentation variable say 'pv_agts'
    pv_agts would be used to filter the reports.
    Hope this is useful to startwith...

  • How to copy a Worksheet into different Report

    HI,
    How to basically copy paste a worsheet in A Report as a worksheet in B Report.
    Thanks,
    Himanshu Tiwari

    Hi
    One way to do it is to tile the workbooks within the same window (i.e Windows > tile horizontally) and then just drag and drop the worksheet into the other workbook (whilst holding down ctrl if you want to copy rather than move)
    Hope that helps.
    Emily

  • HR ABAP-How to copy a PERNR into another new PERNR?

    Hi All,
            How can we copy all the Infotype details related to a Personnel Number into another new Personnel number?
    Thanks in Advance,
       Anjaly

    Hi anjaly,
    1. There is no method/concept of Copying, w.r.t Personnel number.
    2. A new pernr,
        has to be hired in the system FIRST,
        via pa30/pa40 (hiring action),
    3. ONLY THEN,
    4. A new pernr is created in the sytem,
    5. ONLY AFTER THAT,
       we can put other data realted to pernr in the system using pa30 or anything else.
    regards,
    amit m.

  • How to copy referenced files into iPhoto library

    I have a mixture of referenced files and copies in my iPhoto library. I changed now the preferences to always copy files when importing new photos. But, how can I copy the old referenced photos into my library (they are all over the place)? Is there anything like "Copy all files to the library"?

    csmun
    Welcome to the Apple Discussions.
    But, how can I copy the old referenced photos into my library (they are all over the place)? Is there anything like "Copy all files to the library"?
    I'm afraid there isn't - you'll need to do it the hard way I'm afraid.
    What might help is to go into the Library/Originals folder and examine the aliases there. Right click on an alias and select 'Show Original' A finder window will pop open with the Original File. Then replace the alias with the original.
    Regards
    TD

  • How to copy and paste into the same picture using quick selection tool

    I have Photoshop CS5 and am new at this.  What I need to do is copy and paste something in the image back into the same image.  I can select it with the quick selection tool.  All I want to do is paste a copy of it back into my image, move it and rotate it a little. 
    I've searched for an answer for a couple of days now and evidently, I'm searching for the wrong thing.  This is what I need to do and I don't know how to get there.  I do this in Digital Image Suite all the time and it's very simple.  I know Photoshop is a lot more complicated but you can do more with it so I am trying to switch by using it to work on my projects.  I've read articles where people say to use the quick selection tool and do a copy and paste but for me, all it does is add blank layer and the selection disappears.  If I paste again, it pastes the item in the middle of the image and I can't move it or change it in any way.
    One more question:  in the Filters menu, all of the filters are gray-shaded.  I read that I have to buy these filters, is that true?
    Thank you for your help.  If there is a beginner's forum where you would rather I post my questions, please let me know.

    Once you have a selection, I use Ctrl C to copy and Ctrl V to paste.  This will add a layer but may not look like it as it is in exactly the same spot in picture.  If you paste again it will show up near middle of picture.
    If you want to resize and rotate use Ctrl T.
    More options are in Edit/Transform.  I particularly like Warp.
    All the filters should be active, but many only work in 8 bit RGB mode.  To see what mode they are in click Image/Mode.

  • How to copy Inspection Results into Inspection Lot in Good Recipt Process

    Dear Members,
    I am working on a Automatic copy of MIC values [Micro Inspection Characteristics (CML 260-CML 299)] into a batch(new) and Inspection lot( QA32 - Results Screen) in Goods Receipt process(Process order) using MB31.
    I have successfully implemented the customer Exit (EXIT_SAPMM07M_004) for copy MIC values to Batch(Batch Records only).
    But I am not able to find out the proper process or User-Exits to update the same MIC values into Inspection lot which is being created in the same GR process for the order.
    Can anyone please share your experience or tips on this requirement?
    Thanks,
    Vass

    check this link :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60221c69-0f8b-2b10-eebf-bec51a601dd6?quicklink=index&overridelayout=true

Maybe you are looking for