Adds a ~home~ string in my project name

Hi
I am creating a new project in remote DC. It gives me 2 vendors to select from while creating project. One is sap.com and other is mycompany.com. If i select mycompany.com and create a project, it automatically adds a home string in my project name !!
then if i try to rename it from package explorer it is not allowing me to do so.
How can i remove/avoid this home string in my project name.
Thanks.

Hi
Could you please review SAP notes 710315 and 876701?
Can you please also review note 935245 ?
According to the note one needs to add a new namespace in the SLD
Database Namespace, then import from the default sld/active into the new
namespace. From there one should be able to have a choice of vendor in
Developer Studio when we wish to create a new DC.
try these steps
First, review some of the steps to create a name server and
creat a name server on your SLD box through "New Technical System"
and checked the "Name Server" box.
Then add your officially reserved prefix in "Software Component
Name" category of the SLD and add your reserved name in the same
category in the "Name Reservation" area of the SLD.
Afterwards, you should be able to create normally new Development Components
(DC) in Developer Studio with an access to Web Dynpro components.

Similar Messages

How to add folder/project name to a File Naming preset

Here's a tip to automatically add the name of the Project or its parent Folder to the filename during Import or Batch Change.
I always used a custom field for adding my client's name to the filename upon Import or Batch Changing versions or masters. But often I would forget to change the custom name, and since it's auto-populated with the previous entry, I'd end up with a bunch of files with the wrong client's name on them. That looks kind of bad. So once I saw with Aperture 3 you can add the Project name or Folder name when relocating referenced files to the new folder structure, I was excited to be able to do the same for the filenames at import. Well, no such luck. They're not an option when you create a custom File Naming preset.
However, I recently decided to poke around inside some plist files, and found a workaround. I discovered the format string for Folder Name is %F and Project Name is %P. The trick is getting the code into the Format Field where you create the preset.
Create a new File Naming preset by choosing "edit" from the Version Name menu during Import or Batch Change. Drag everything you want in the name into the Format field, and enter %F or %P where you want the Folder or Project name. The tricky part is that you can't insert it between two existing criteria. It only works at the very end. After you have it in place, you can drag the criteria around to get it in the order you want.
The alternative method is to insert the code directly into the plist. PLEASE, always make sure you're working with a copy and have a good backup when you're poking around in such things. If you have trouble getting the code to take from within Aperture, you can try this. Same as above, create a new preset, but this time, enter an F or P where you want the Folder or Project name. Give it a unique preset name and save it. Then Quit Aperture. Navigate to ~/Library/Application Support/Aperture/FileNamingPresets.plist, and make a copy of the file, then open with Property List Editor. Dropdown the plist and then dropdown the item you want to edit. You should recognize it by the preset name. Now the easy part. Click in the FormatString field and insert the % character before the F or P you entered in the Format field. Save and you're done.
I discovered later that while the Folder and Project name works just fine during import, for some reason only the Project name works during Batch Change. The Folder name simply creates a "-" in the filename.
In case this is seen as a hack and gets deleted, I'm also submitting it to http://www.macosxhints.com/ and I suspect if anyone from MacCreate sees it, they'll steal it too, as they're known to do.

I do not think there is an out of the box way to do this.
The immediate solution that comes to mind is using a workflow, that runs everytime a document is uploaded/item created, which may be too much for your scenario.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Add Project Name and description to the Projects Notification Layout in OTL

Hi,
I want to add the Project name and description to the OTL Projects Notification Layout. I have tried the following code to change the ldt file.
BEGIN HXC_LAYOUT_COMPONENTS "Projects Notification Layout - Project Name"
OWNER = "ORACLE"
COMPONENT_VALUE = "PROJECTNAME"
REGION_CODE = "CUS_PROJECT_PROMPT"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_CUI_PROJECT_NAME"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "181"
COMPONENT_DEFINITION = "LOV"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"Projects Notification Layout - Day building blocks - matrix layout"
LAST_UPDATE_DATE = "2004/05/24"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Notification Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
QUALIFIER_ATTRIBUTE1 = "ProjectBaseLOVVO"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "HXC_CUI_PROJECT_LOV"
QUALIFIER_ATTRIBUTE4 = "809"
QUALIFIER_ATTRIBUTE5 = "12"
QUALIFIER_ATTRIBUTE6 =
"HxcCuiProjectName|PROJECTNAME-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECTNAME|RESULT|N|HxcCuiProjectName|PROJECTNAME-DISPLAY|RESULT|N"
QUALIFIER_ATTRIBUTE8 = "ProjectName"
QUALIFIER_ATTRIBUTE9 = "ProjectId#NUMBER"
QUALIFIER_ATTRIBUTE10 =
"oracle.apps.hxc.selfservice.timecard.server.ProjectBaseLOVVO"
QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute8"
QUALIFIER_ATTRIBUTE28 = "PROJECT_NAME"
QUALIFIER_ATTRIBUTE30 = "Y"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
I have created a segment PROJECT_NAME (attribute8) to the "PROJECTS" context of "OTL Information Types" DFF. Bouce the apache server.
I am able to get the prompt but unable to get the data in the column.
Please help.
Thanks & Regards,
Munish

Hi Also have tried with the following ldt code. In this code I have added the projectname field from the PROJECT LOV and tried to get the value of the projectname into the text field.
BEGIN HXC_LAYOUT_COMPONENTS "Projects Notification Layout - Project"
OWNER = "ORACLE"
COMPONENT_VALUE = "PROJECT"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_TIMECARD_PROJECT"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "180"
COMPONENT_DEFINITION = "LOV"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"Projects Notification Layout - Day building blocks - matrix layout"
LAST_UPDATE_DATE = "2004/05/24"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Notification Layout - Project"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
QUALIFIER_ATTRIBUTE1 = "ProjectBaseLOVVO"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "HXC_CUI_PROJECT_LOV"
QUALIFIER_ATTRIBUTE4 = "809"
QUALIFIER_ATTRIBUTE5 = "12"
QUALIFIER_ATTRIBUTE6 =
"HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N|HxcCuiProjectName|PROJNAME|RESULT|N"
QUALIFIER_ATTRIBUTE8 = "ProjectNumber"
QUALIFIER_ATTRIBUTE9 = "ProjectId#NUMBER"
QUALIFIER_ATTRIBUTE10 =
"oracle.apps.hxc.selfservice.timecard.server.ProjectBaseLOVVO"
QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute1"
QUALIFIER_ATTRIBUTE28 = "PROJECT"
QUALIFIER_ATTRIBUTE30 = "Y"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
BEGIN HXC_LAYOUT_COMPONENTS "Projects Notification Layout - Project Name"
OWNER = "CUSTOM"
COMPONENT_VALUE = "PROJECTNAME"
SEQUENCE = "181"
COMPONENT_DEFINITION = "TEXT_FIELD"
RENDER_TYPE = "WEB"
PARENT_COMPONENT = "Projects Notification Layout - Day building blocks - matrix layout"
REGION_CODE = "CUS_PROJECT_PROMPT"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_CUI_PROJECT_NAME"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Notification Layout - Project Name"
OWNER = "CUSTOM"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
QUALIFIER_ATTRIBUTE1 = "N"
QUALIFIER_ATTRIBUTE2 = "NODISPLAYCACHE"
QUALIFIER_ATTRIBUTE3 = "10"
QUALIFIER_ATTRIBUTE4 = "1"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute20"
QUALIFIER_ATTRIBUTE28 = "PROJNAME"
QUALIFIER_ATTRIBUTE30 = "Y"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
But no data is displayed.
I have also tried with the QUALIFIER_ATTRIBUTE27 = "Attribute8" as the attribute8 is being defined in the PROJECTS context of the "OTL Information Types" DFF.
Thanks & regards,
Munish

PLD How to add Project Name In Trail balance.

Hi,
how to Link to projects code and Project Nalme in Trail balance.....

Hi,
Do you know variable or database field for project name/code? In general, Financial report PLD were designed by SAP by using variables and its very difficult to find and to add it into PLD.
Thanks & Regards,
Nagarajan

OTL timecard customisation - add Project Name - change DFF???

Hi,
In Metalink note 294866.1 it describes a way of adding Project Name to a timecard, and it describes adding a layout component with the following qualifiers to the .ldt file:-
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
QUALIFIER_ATTRIBUTE1 = "N"
QUALIFIER_ATTRIBUTE2 = "NODISPLAYCACHE"
QUALIFIER_ATTRIBUTE3 = "10"
QUALIFIER_ATTRIBUTE4 = "1"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute20"
QUALIFIER_ATTRIBUTE28 = "PROJECTNAME"
QUALIFIER_ATTRIBUTE30 = "N"
END HXC_LAYOUT_COMP_QUALIFIERS
The two Qualifier Attributes 26 and 27 refer to the DFF for "OTL Information Types" - "PROJECTS" context, specifying Attribute20 column of the DFF.
At the moment we do not have attribute20 defined for this context on the DFF.
The question I have is that if the change to the layout is to add the Project Name for information purposes for timecard users/approvers etc, should the DFF be changed? Or does it only need changing if there is a need to save the project name in the timestore (or another reason)?
The Metalink note mentioned doesn't say anything about making a corresponding change to the DFF.
Regards
Andy

Hi,
In Metalink note 294866.1 it describes a way of adding Project Name to a timecard, and it describes adding a layout component with the following qualifiers to the .ldt file:-
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
QUALIFIER_ATTRIBUTE1 = "N"
QUALIFIER_ATTRIBUTE2 = "NODISPLAYCACHE"
QUALIFIER_ATTRIBUTE3 = "10"
QUALIFIER_ATTRIBUTE4 = "1"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute20"
QUALIFIER_ATTRIBUTE28 = "PROJECTNAME"
QUALIFIER_ATTRIBUTE30 = "N"
END HXC_LAYOUT_COMP_QUALIFIERS
The two Qualifier Attributes 26 and 27 refer to the DFF for "OTL Information Types" - "PROJECTS" context, specifying Attribute20 column of the DFF.
At the moment we do not have attribute20 defined for this context on the DFF.
The question I have is that if the change to the layout is to add the Project Name for information purposes for timecard users/approvers etc, should the DFF be changed? Or does it only need changing if there is a need to save the project name in the timestore (or another reason)?
The Metalink note mentioned doesn't say anything about making a corresponding change to the DFF.
Regards
Andy

Add suffix to Project names? Pre-fill Project description?

Hi. I'm still working on my Ap3 workflow. Either of the actions in the subject would be most helpful:
• *Add suffix to Project names*. I have 144 Projects I would like to rename by adding a few words to the end of their current names.
• *Pre-fill Project Description*. The Project Description field can be found on the Project Information HUD ({Shift}+i with a Project selected). I would like to have all new Projects start with a default Project description. This could be put in from the import panel.
I could alternatively make use of being able to append text to the Project Description field.
Thanks.

Hi Dave,
When dealing with dropdowns the best event to use is the preOpen event. This means that there wouldn't be any script in the first dropdown.
Then in the second dropdown you would have a relative simple script that would look back at the user's selection in the first dropdown and then populate the display items in the second dropdown.
See examples here:
http://assure.ly/jcTahK
http://assure.ly/gcXx03
http://assure.ly/fYCuQ2
When adding an item to a dropdown, you can specify both the display item (what the user's sees) and the bound value (the value of the dropdown that is associated with the user's selection).
So,
this.additem("Clonmel", "(052) 1234567");
This would add a city "Clonmel" to the dropdown and the value of the dropdown would be "(052) 1234567", if the user selected Clonmel.
The textfield can then be given the same name as the dropdown and its binding set to Global (see the object > Binding palette when the textfield is selected).
Hope that helps,
Niall

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How can i check the duplicate NPD project name?

Dear all,
I would like to know on how i can check the duplicate NPD's project name? I found that some NPD's project is initiate serveral time with the same or semilar name from user name. Supposing the project name was "Smart Pilot". I always found that project may type differently such as "Smart PILOT","smart pilot" or even "Smart Pilots". Supposing i would like to validate all of these name before save by using validation framework, or custom validation. Is it possible?
Supposing it was possible, can you please guiding me on how?
Thank you so much in advance for all of the answer.
Phaithoon W.

So here is some example code for a quick validator. Note that this uses a hard coded English error message, rather than a translation. If you want to use translations instead, look at some of the examples in the ReferenceImplementations\Validation\SourceCode\ReferenceValidation folder in the Extensibility Pack, and review the Validation Training as well (in the ReferenceImplementations\Validation\Documentation folder).
Note that the provided code is for demonstration purposes only and is not supported by Oracle.
The classes:
using System;
using System.Data;
using System.Xml;
using Xeno.Data.NPD;
using Xeno.Prodika.Application;
using Xeno.Prodika.Services;
using Xeno.Prodika.Validation;
using Xeno.Prodika.Validation.Validators;
namespace Oracle.Agile.PlmProcess.Validation
    public class NPDUniqueProjectNameValidatorFactory : XmlConfigValidatorFactoryBase
        protected override IValidator Create_Internal(XmlNode configNode)
            return new NPDUniqueProjectNameValidator();
    public class NPDUniqueProjectNameValidator : BaseValidator
        private const string sql = @"select 1 as dup from NPDPROJECTML where UPPER(title) = UPPER ('{0}') and FKPROJECT <> '{1}' and LANGID = {2}";
        public override bool Validate(IValidationContext ctx)
            var project = ctx.ValidationTarget as INPDProjectDO;
            bool hasDuplicate = false;
            string sqlToExecute = String.Format(sql, project.ProjectML.Title, project.PKID, UserService.UserContext.User.PreferredLanguage);
            using (IDataReader reader = AppPlatformHelper.DataManager.newQuery().execute(sqlToExecute))
                if (reader.Read())
                    hasDuplicate = true;
            if (hasDuplicate)
                ctx.AddError(String.Format("A project already exists with the name '{0}'.", project.ProjectML.Title));
            return hasDuplicate;
        private IUserService UserService
            get { return AppPlatformHelper.ServiceManager.GetServiceByType<IUserService>(); }
Next, add the following to the ValidationSettings.xml file in config\Extensions:
1. add the validator factory, with a reference name in the config:
<ValidatorFactories>
        
        <add key="NPD_CheckProjectNameForDuplicate" value="Class:Oracle.Agile.PlmProcess.Validation.NPDUniqueProjectNameValidatorFactory,ReferenceValidation" />
</ValidatorFactories>
2. Add a rule for NPD project Save event:
<rule type="3202">
            <condition event="save">
                <if type="NPD_CheckProjectNameForDuplicate" require="true" report="true" />
            </condition>
</rule>
Compile the reference example into a dll, and add that dll into web\npd\bin
When you try to save a project with a duplicate name, it should now give you the error message.

PWA 2010 error when i try to open the project name in Project Center

Hi, this is my first post.
Im having a trouble with our Project Server, when i try to open the project name in Project Center it gives me an error like this:
ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information
Stack Trace:
[SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information]
Microsoft.Office.Project.Server.WebServiceProxy.PWA.WorkflowGetProjectDrilldownInformation(Guid projectUid, String userPropToClear, Boolean bCheckOutProject) +401
Microsoft.Office.Project.PWA.ApplicationPages.ProjectDrillDownPage.OnLoad(EventArgs e) +822
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
And also when i try to open the document that associated with the project in project center it gives me an error like this :
Exception Details: System.Web.Services.Protocols.SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore
to access all error information
Source Error:
Line 12: bool LoadLinkItemsPage = (Request.QueryString["Task"] != null);
Line 13:
Line 14: ProjectWSSInfoDataSet ds = PJContext.Current.PSI.WssInteropWebService.ReadWssData(ProjectGuid);
Line 15: if (ds != null && ds.ProjWssInfo.Rows.Count > 0)
Line 16: {
Source File: c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\PWA\COMMON\wssnav.aspx Line: 14
Stack Trace:
[SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information]
Microsoft.Office.Project.Server.WebServiceProxy.WssInterop.ReadWssData(Guid projectUID) +377
ASP._layouts_pwa_common_wssnav_aspx.PJWebPage_OnLoad(EventArgs e) in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\PWA\COMMON\wssnav.aspx:14
Microsoft.Office.Project.PWA.PJWebPage.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
has anyone experienced this
before and might be able to help? Thank you!

For what it's worth, given the age of this question, I've found that stopping and starting the Project Application Service on each server via Central Admin is less disruptive to the rest of your farm when using Project Server in a larger SharePoint
farm.
IISRESET will cause active user sessions to be disconnected and could result in lost data.
I also found that recycling the app pool associated with my Project Server web application in IIS and restarting the web site did not resolve this situation so the IISRESET is not a guaranteed fix.
Targeting only the Project Application Service from Central Admin removes this minor risk and actually restored access to our Project Sites.
N03L.

How do i add the home icon to the dock

How do i add the home icon to the dock

Hello,
In a Finder Window navigate to your Boot drive->Users->Your User Name, drag the house to the right side of the Dock by Trash.
This is from 10.5.87, but 10.6 should be similar enough...

How to add a custom field to the "Projects" page "Group by" data menu list

Hi,
I'm deploying Project Online and I want to group projects by a custom field on the "Projects" page. Currently I can see options for group by Project Name, Start, Finish, % complete etc. I would like to group by a custom field of programme name
which is filled in on the Project Details form.
I can create the enterprise field etc, however I can't work out how to make the new enterprise field appear in this list. Or am I barking up the wrong tree and should be creating separate Project Types for each programme?
Any help an advise greatly appreciated.
Regards,
Conrad

Hello, add the programme field to the Project Center view then it will be available to group by. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Error occurred in deployment step 'add solution' value cannot be null Parameter name: g

Hi!
I have a SharePoint Server 2013 with latest updates. Worflow Manager 1.0 installed and configured correctly. The server has a website, site temblate is Reacods Center. This site is default. On the site I created a blank Document library "TestLib"
If I create workflow in SharePoint Designer 2013, workflow works normally. Workflow set Title of element to "MyCustomTitle" and Write to History string "Done!".
If I create Empty Solution in Visual Studio 2013, insert into solution Workflow and make same actions, my solution at deployment step fails with error:
"error occurred in deployment step 'add solution' value cannot be null Parameter name: g"
Please, help me to resolve this problem?
Thanks!

Hi,
What if stop this service, then start it again, perform an iisreset? It will make the change applied to the whole farm.
Also, you can check the ULS logs to see if there is any unexpected error occurs when deploying this solution.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Adding Project Name in OTL Time Card

Hello All,
I have done the following Changes to display Project Name in OTL time Card in R12.1.3 with no luck, please let me know.
1. Added Attribute28 as PROJECTNAME for Context - PROJECTS in OTL INformation Types - DFF
2. Using AK Html Forms, Added HXC_CUI_PROJECT_NAME to HXC_CUI_TIMECARD
3. Added Mapping PROJECTNAME
4. Ran the Generate Flexfield and Mapping Information
5. Modified and uploaded the ldt
6. Made Changes to Preferences using OTL Application Developer to look at latest layout
7. Bounced Apache Server
BEGIN HXC_LAYOUTS "ZEN_PROJECTS-TIMECARD" "HXC"
OWNER = "RSREENIV"
DISPLAY_LAYOUT_NAME = "Z Projects Timecard Layout"
LAYOUT_TYPE = "TIMECARD"
TOP_LEVEL_REGION_CODE = "HXCCONFIGTESTCUI"
LAST_UPDATE_DATE = "2012/01/06"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
QUALIFIER_ATTRIBUTE1 = "ProjectLOVVO"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "HXC_CUI_PROJECT_LOV"
QUALIFIER_ATTRIBUTE4 = "809"
QUALIFIER_ATTRIBUTE5 = "12"
#QUALIFIER_ATTRIBUTE6 ="HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N"
QUALIFIER_ATTRIBUTE6 ="HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N|HxcCuiProjectName|PROJECTNAME|RESULT|N"
QUALIFIER_ATTRIBUTE8 = "ProjectNumber"
QUALIFIER_ATTRIBUTE9 = "ProjectId#NUMBER"
QUALIFIER_ATTRIBUTE10 = "oracle.apps.hxc.selfservice.timecard.server.ProjectLOVVO"
QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute1"
QUALIFIER_ATTRIBUTE28 = "PROJECT"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
### Project Name Component start ###
BEGIN HXC_LAYOUT_COMPONENTS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
COMPONENT_VALUE = "PROJECTNAME"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_CUI_PROJECT_NAME"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "215"
COMPONENT_DEFINITION = "TEXT_FIELD"
RENDER_TYPE = "WEB"
PARENT_COMPONENT = "Projects Timecard Layout - Day Scope Building blocks for worker timecard matrix"
LAST_UPDATE_DATE = "2004/05/24"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
# Show Label (Component)
QUALIFIER_ATTRIBUTE1 = "N"
# Show Label (Parent Component)
QUALIFIER_ATTRIBUTE2 = "N"
# Field Width
QUALIFIER_ATTRIBUTE3 = "20"
# Field Height
QUALIFIER_ATTRIBUTE4 = "1"
# Style Class
QUALIFIER_ATTRIBUTE17 = "OraInlineInfoText"
# Display On New Line
QUALIFIER_ATTRIBUTE20 = "N"
# Show Outside Building Block
QUALIFIER_ATTRIBUTE21 = "Y"
# Outside Direction
QUALIFIER_ATTRIBUTE22 = "L"
# Access Method
QUALIFIER_ATTRIBUTE25 = "FLEX"
# Context
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
# View Object Attribute
QUALIFIER_ATTRIBUTE27 = "Attribute28"
# Component Alias
QUALIFIER_ATTRIBUTE28 = "PROJECTNAME"
# Read Only
QUALIFIER_ATTRIBUTE30 = "Y"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
### Project Name Component end ###
Edited by: 891594 on Jan 6, 2012 11:40 AM
Edited by: 891594 on Jan 6, 2012 11:54 AM

In extended controller processRequest method:
Get the project ID, asssuming that you are passing project id through hash map.
String prjId = pageContext.getParameter("ProectId_Parameter");
Default the LOV item value using:
OAMessageLovInputBean msglov = (OAMessageLovInputBean)webBean.findChildRecursive("ProjectId");
if(msglov != null)
msglov.setText(pageContext,"Hello");
-Anand

How to export images with Project Name to be visable by Photo Mechanic.

Hello all,
I am trying to create another complete set of my images, that can be edited by outside programs (Photo Mechanic and/or Lightroom). I am doing this by exporting the images out of a managed library. I want the Aperture "*Project name*" and Rating fields to be passed to Photo Mechanic. And then I want PM to be able to do queries on the Metadata fields containing the Aperture Project Name and Rating. My intention is to use Photo Mechanic to rename the images and relocate the images but still keep track of the Rating and Project Name.
In Aperture, when I add a custom metadata item under IPTC and export the image, that custom metadata item does not show up in PM or Bridge for that matter.
How can I export images and have the Rating and *Project Name* be exported and visible in PM or LR or Bridge?
Thanks in advance,
Dick B.

There is not an easy way but Ian Wood's tool might help you out.
Personally I would just use the "subfolder format" drop down options available in all of the export and relocate dialogs to sort them into directories that are based on Aperture project name - easy enough considering those other tools use file system based folders for there organization structure anyway.
RB

The term 'Add-SPDistributedCacheServiceInstance' is not recognized as the name

Hi,
I have setup Sharepoint 2013 standalone on Windows 2012 server. I am developing an app that will make use of social apis of sharepoint 2013. Out of the box installation didnt have Distributed Cache Service running and I am not sure if its needed to be run
in order to make social apis working on the server. Anyhow, since distributed cache service was showing up as Stopped and I could not restart it, I have deleted the distributed cache service and when I retry to re-add it by entering Add-SPDistributedCacheServiceInstance
command on powershell, I get the following error,
Add-SPDistributedCacheServiceInstance : The term 'Add-SPDistributedCacheServiceInstance' is not recognized as the name
of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At line:1 char:1
+ Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Add-SPDistributedCacheServiceInstance:String) [], CommandNotFoundExcept
ion
+ FullyQualifiedErrorId : CommandNotFoundException
I am at total loss here. Any help/pointers to get around this error and setup social api working on this server will be helpful.
Regards,
Usman

The issue is because your PowerShell console has not loaded the appropriate SharePoint DLL
in order to call the API. To resolve this, you can open the SharePoint 2010 Management Shell to execute the script or add the assembly manually before running the script.
--Cheers

Adds a ~home~ string in my project name

Similar Messages

Maybe you are looking for