Adds selection field at the first screen of FBL3N (G/L line item display)
I would like to adds line item selection field at the default first screen of FBL3N.
The field I'd like to add at the default selection screen is :Amount.
This field can be selected at dynamic selection. But I'd like to use the field at the first screen of FBL3N, not in daynamic selection screen.
If anyone knows how to add the fields into FBL3N first screen, please advice me how to do it.
Edited by: Itchy31 on Jul 23, 2009 8:30 AM
Hi,
You can not add the new fields in the selection criteria thats the reason dynamic options are given for the further selection.
If you still want to add in the selection screen then go for a customisation and coordinate with the ABAPer which is not suggestable as it is readily avilable in dynamic selection.
Similar Messages
-
How to make the GL account discription possible in FAGLL03 line item display?
Dear Experts,
Could you tell me how to make the GL account discription possible in FAGLL03 line item display?
I checked the layout, there is no account discription.
How should I do?
Thanks!
Xinling ZhangHi
One you execute FAGLL03, go to Settings>Layout>Current Header Rows
You can add some predefine characteristics here.
I am not sure why the hyperlink is not working at your end. But you can search the SDN for special fields in FAGLL03 and you can get lot of posts for this document.
Regards
Sanil Bhandari -
Add new fields on the header screen of COR1
Hi Experts,
I am new to this type of work, please help me in doing....
My requirement is, to add one field on the header details of the COR1 from a Z table.
Can anyone please tell me how to handle this.
I searched the regarding this in SDN but i had not got any solution.
Can any one please tell me how to handle this(screen shots will be more helpfull).
Please take it as priority.
Thanks in advace,
Kruthik
Edited by: kruthik_06 on Jun 20, 2011 9:04 AMHi all,
I need to know if is it possible to add a custom field in COR1 for process order. I searched forum for something about this, but cannot find anything.
can anybody please suggest me something ?
thanks
Kruthik -
How to add new fields in message creation screen
Hi All,
My requirement is to add another 2 fields in the message creation screen.
Also I found this link is bit useful.
Add custom fields to Support Message
Can anyone share the detailed procedure to add a field in the message screen.
Thanks in Advance.
Regards
Narasingam. BHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
How can i add Custom fields into the
Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
SajidHi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek -
Additional Field to line item display
Hello Everyone
I want to add two additional field ( date of entry and entry time) to GL Line item display.Can any body please share.
Looking forward to hear from all of you.First try to determine if there are any user exits (screen exits actually) or BADI's which can do this.
For finding the relevant user exits, determine the transaction code first and search on SDN for the report in which you enter the transaction code, and which will return all user exits for this transaction.
For BAdI's there is also a program to be found on SDN.
Next read the documentation of these user exits / BAdI's and you will be on your way. -
How to add new fields in the Create Suppport Message Screen
Hi experts,
I have a requirement which is to add 3 selection fields in the Create Support Message Screen. The 3 fields are Category, Subject and Solution. The value of these 3 fields must aurtomaticallly populate the same fields in the Support Message screen in the Solution Manager for each message sent.
Is this functionallity possible? If yes, please give me some ideas how to do it..
Points will be rewarded for helpful answers.Hi Eric,
Yes it is possible. Use statements SET and GET parameters in your program.
1. Get parameter ID for the fields Category, Subject and Solution from the data element. or Set parameter ID.
2. Use GET Statement in the PBO of the Support Message screen .
GET PARAMETER ID 'XYZ' FIELD <field-name>.
"XYZ is the parameter ID
"<field-name> - field should have the field . not in quots
3. Use SET statemet in the PAI of the Create Support Message Screen or where the value is available for the 3 fields.
SET PARAMETER ID 'XYZ' FIELD <field-name>.
"XYZ is the parameter ID
"<field-name> - field should have the field . not in quots
4. Parameter ID : Double click on the data element of the specified field->Select Further Characteristics TAB -> u can see the parameter ID or U can set the parameter ID there .
It works. Try it.
Regards,
Venkat.O -
Need to add field in the standard screen
Hi
As per my requirementn we have to add one field in the Material master(MM01/MM02). Mentioned path below.
MM01/MM02)--> MRP1 tab --> in the MRP areas > click on MRP AREAS button>Pop will come with MRP AREA --> double cleck on entry > MRP area screen will appear> In general data tab> MRP group field is availble> Beside that i have to add one field.
Program Name--> SAPLMD_MGD1
Screen --> 0030
As it is separate pop kind screen not sure whether we can add or not. Please let me know if there is any chance to add the field with procedure.
Regards
Raj.hi
For this you have to find the screen EXITS.
GOTO MM01->click on SYSTEM->then STATUS mow click on the program and find our the package name.
NOW GOTO -> se84 ->click on ENHANCEMENT-> give the package name here and EXECUTE you find all the EXITs.
hope this helps
Regards
Ritesh -
Add one field on the screen.
hi ,everybody.
i want to add one field on the progam SAPMV10A,it is VD05,The screen number is 300.the field name is TVLV-ABRVW.How can i do,thank you.Check here:
SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payab;e --> Customer Accounts -> Master data --> Preparations for creating customer master data --> Adoption of Customer's own master data fields --> Businees Add-in:.... -
How can we add additional fields to the BP Search RESULT screen?
Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM -
Need to enhace tcode FD32 to add new screen fields on the initial screen
Hi All,
I am supposed to add two new screen fields on the initial screen of TCODE FD32,
I am unable to find any screen exit for that. Is there any screen exit present for that or is there any way to do this.
Kindly help me, solutions will be greatly rewarded.
Thanks in advance,
Nagaraju.check below
Transaction Code - FD32 Change Customer Credit Management
Exit Name Description
RFDRRANZ User exits: Accounts Receivable Information System
No of Exits: 1
Rewards if useful...............
Minal -
Want to add one more link in the first screen when user gets into EBP
Hi All,
I want to add one more link to the template <b>WELCOME</b> in Internet Service <b>BBPGLOBAL</b>. This is the first screen that the user gets when he logs into EBP.
The issue is the same screen is different in DEV and TEST environment.
I verified the code in the template in both systems but they are exactly the same.
Also, checked the Parameters in the Templates and they too match.
While going through the code, I found out that MENU_NODE_TAB is used in a repeat loop to verify user has access to the further links.
But the surprising thing is the code is same in both the systems, but Test evnironment is reflecting the link I want to add in DEV environment.
Am I missing something??
Pls let me know.
Thanks in advance.
<b>I will reward full points for helpful answers!!</b>
Regards,
SanaaHi,
In welcome.html there is a ITS code to initialize array with information about transaction (line 87).
This code is in the loop:
repeat with idx from 1 to MENU_NODE_TAB-TEXT.dim;
if( (MENU_NODE_TAB-S_IDENT[idx] == "BBPSC01" && A_GEN_URL<i> == "") ||
(MENU_NODE_TAB-S_IDENT[idx] == "BBPSC03" && A_GEN_URL<i> == "") ||
(MENU_NODE_TAB-S_IDENT[idx] == "BBPSC02") );
A_S_IDENT<i> = MENU_NODE_TAB-S_IDENT[idx];
A_GEN_URL<i> = MENU_NODE_TAB-GEN_URL[idx];
A_OBJECT_ID<i> = "parent.launchpad.menu.M" & MENU_NODE_TAB-OBJECT_ID[idx] & ".root.name + parent.launchpad.menu.M" & MENU_NODE_TAB-OBJECT_ID[idx] & ".path";
A_TEXT<i> = quotFilter(MENU_NODE_TAB-TEXT[idx]);
A_INTRODUCTION<i> = #WELCOME_SENTENCE6;
found = 1;
end;
end;
If You want to add this 4 links on begining - extend this array (in line 87):
<!-- initialize array with information about transaction on startpage -->
A_S_IDENT[1] = "custom_link1"; A_GEN_URL[1] = "www.google.com"; A_OBJECT_ID[1] = ""; A_TEXT[1] = "google"; A_INTRODUCTION[1] = "google link";
A_S_IDENT[2] = "custom_link2"; A_GEN_URL[2] = "www.rediffmail.com"; A_OBJECT_ID[2] = ""; A_TEXT[2] = "rediffmail"; A_INTRODUCTION[2] = "redi link";
A_S_IDENT[3] = "custom_link3"; A_GEN_URL[3] = "www.yahoo.com"; A_OBJECT_ID[3] = ""; A_TEXT[3] = "yahoo"; A_INTRODUCTION[3] = "yahoo link";
A_S_IDENT[4] = "custom_link4"; A_GEN_URL[4] = "www.greetings.com"; A_OBJECT_ID[4] = ""; A_TEXT[4] = "greets"; A_INTRODUCTION[4] = "greeting link";
A_S_IDENT[5] = ""; A_GEN_URL[5] = ""; A_OBJECT_ID[5] = ""; A_TEXT[5] = ""; A_INTRODUCTION[5] = "";
A_S_IDENT[6] = ""; A_GEN_URL[6] = ""; A_OBJECT_ID[6] = ""; A_TEXT[6] = ""; A_INTRODUCTION[6] = "";
etc.
<!-- Search for shopping transaction in launchpad -->
repeat with idx from 5 to MENU_NODE_TAB-TEXT.dim;
Regards,
Marcin -
How to add Time field in the Date Calender in OAF screen
Hi All,
is there a way to add time field in the date calender, so that the user can set the time and select the date, then return the date/time to the specified field?
or is there any slandered calender that has this functionality?
Regards,
Mahdi ChararaHi Mahdi ,
If you are working on standard page then you can create a new item by personalization and set the DataType as : DATETIME it will display
date as well as time .
For custom page - you can create a new item as desired in anywhere in page and set the DataType as : DATETIME it will show both time
and date .
Is this what you looking for ?
--Keerthi -
Add custom field in the F4 help for selecting source field in tcode FMDER
HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
PankajOK
-
Can I execute a report and skip the first screen in CJE0
I'm trying to call transaction CJE0 and skip the first screen. The report name I'm assigning to the PID REI appears in the screen field, but you have to click execute to continue to the report.
Is there something I'm missing.
Thanks
KarenI've tried using the following code to run project reports without having to select the report name and exectue, but it is still leaving the user on the screen for CJE0 with the correct report name, but it's not skipping the screen and executing the report. Can you see what I'm doing wrong.
Thank-you for your help
Karen
Code -
data begin of bdcdata occurs 100.
include structure bdcdata.
data end of bdcdata.
data begin of itab occurs 10.
include structure bdcmsgcoll.
data end of itab.
data program like sy-repid.
program = '11ERL1A'.
bdcdata-program = 'SAPMKCEE'.
bdcdata-dynpro = '0500'.
bdcdata-dynbegin = 'X'.
append bdcdata. clear bdcdata.
bdcdata-fnam = 'RKB1D-REPID'.
bdcdata-fval = program.
append bdcdata. clear bdcdata.
call transaction 'CJE0' using bdcdata mode 'N'
messages into itab.
Maybe you are looking for
-
How do I export my library of Raw files to jpegs for use in a windows system?
So we just returned from vacation in Belize and I have over 1300 raw images in an aperture library. I need to export all of these images in jpeg format, onto a flash drive, so my wife can easily view them on her windows machine. How can I do this?
-
Can' t consume JMS messages from remote queue
Hello. We are using Tibco JMS Server as Foreign JMS server from WL server. And WebLoigic (8.1 SP 3) MDBs are receivers. Everything works fine until there is a restart of the Tibco server. Once the queues become unavailabe, we see in the WL log that t
-
Foreign currenvy gain/loss when partial payments are done at F-53
Dear Experts, Hello. User requests to create foreign currency gain/loss line items when execuitng partial payments at transaction F-53. I have no idea about the requests. Can someone tell me how to do it? Satoshi Matsumoto
-
[svn:osmf:] 12421: Extending CompositeMetadata unit tests.
Revision: 12421 Revision: 12421 Author: [email protected] Date: 2009-12-03 01:28:37 -0800 (Thu, 03 Dec 2009) Log Message: Extending CompositeMetadata unit tests. Adding null checks to CompositeMetadata. Modified Paths: osmf/trunk/framework/
-
Need to load complete preview before playing from the iTUNES STORE No such selection.
REBUFFERING STREAM is constant during preview of songs. The solution suggested by the community was to: Go to iTUNES preferences>STORE and select "LOAD COMPLETE PREVIEW BEFORE PLAYING. I tried that but the STORE does not offer this option. WHAT