Addstpall.sh doesn't stop concurrent manager

RH AS 3, EBS 11.5.10
adstpall.sh script doesn't pass password to adcmctl.sh:
/d00/oracle/eviscomn/admin/scripts/EVIS_oraserv1/adstpall.sh stop apps/apps
Executing service control script:
/d00/oracle/eviscomn/admin/scripts/EVIS_oraserv1/adcmctl.sh stop
script returned:
You are running adcmctl.sh version 115.24
Shutting down concurrent managers for EVIS ...
ORACLE Password:
Concurrent Manager encountered an error connecting to the database.
Check if you have specified a correct ORACLE username and password. Check if your ORACLE environment is setup correctly. Check if you have reached the maximum number of users on the database. Contact your Database Administrator to increase the maximum number of users on the database.
adcmctl.sh: exiting with status 1
...

Hello,
What is the script you are running i think wrong..
/d00/oracle/eviscomn/admin/scripts/EVIS_oraserv1/adstpall.sh stop apps/apps
See this is the script you are running.. right. why should u give the STOP again in the command.. there is no need to give.

Similar Messages

Addstpall.sh doesn't stop concurrent manage

RH AS 3, EBS 11.5.10
adstpall.sh script doesn't pass password to adcmctl.sh:
/d00/oracle/eviscomn/admin/scripts/EVIS_oraserv1/adstpall.sh stop apps/apps
Executing service control script:
/d00/oracle/eviscomn/admin/scripts/EVIS_oraserv1/adcmctl.sh stop
script returned:
You are running adcmctl.sh version 115.24
Shutting down concurrent managers for EVIS ...
ORACLE Password:
Concurrent Manager encountered an error connecting to the database.
Check if you have specified a correct ORACLE username and password. Check if your ORACLE environment is setup correctly. Check if you have reached the maximum number of users on the database. Contact your Database Administrator to increase the maximum number of users on the database.
adcmctl.sh: exiting with status 1
...

Hi user459602,
Double check s_concstatus has value equal to "enabled" in the environment context file ($APPL_TOP/admin/${TWO_TASK}_`hostname -s`.xml).
If the value is disabled adstrall.sh will ignore the CM component.
Yury

Concurrent Manager start/stop EBS R12

Hi all,
I am starting all the processes/services in my EBS R12 as APPLMGR user,
using the shell script:
$ adstrtal.sh apps/apps
and to stop it with:
$ adstpall.sh apps/apps
But when I run the stop script, I still see the Concurrent Manager process active
(ps -ef|grep FNDLIBR).
Does adstpall.sh do not contain the script to stop CM?
Thanks a lot

I just get paranoid when it keeps emailing the APPLMGR user that the CM died -giving up What is the message you get? If it says "successfully" then you can ignore the message.

How to stop add-ons manager tab from loading at start up of Firefox 3.6.17 (disabling the update add ons option doesn't stop it)?

Recently firefox has started loading the plugin checker in a new tab everytime it starts. This is annoying and turning off the automatic check for addon updates doesn't stop it.

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Concurrent manager hands

Dear all,
Recently I'm facing weird situation.
Suddenly the concurrent manager hangs. It doesn't show "Inactive Manager"
It just doesn't progress. It stays on "Pending Normal"
Neither a restart of the CM, nor restart of the whole application (and the DB) is enough.
I had to reboot the server in order the CM work properly.
This issue is recurring on a daily basis.
Could you help me in solving it
Your prompt reply is highly appreciated
Rgds,
wazwaz

Hi,
Check the following:
1. run the "purge Concurrent requests" for all schema's and age will be around 15 days as the parameter
2. try to remove unwanted logfiles under $APPLCSF/$APPLLOG as well as $APPLCSF/$APPLOUT for out files
3. monitor the concurrent manager log files under $APPLCSF/$APPLLOG
(preferably the file name looks like <Instance>hostname.mgr (for example PRODserver1.mgr).
4. check the rows in the FND_CONCURRENT_REQUESTS and try to reduce it (if above Item1 Doesn't reduce much rows, You need to consider to purge the rows in this table)
5. try to run the cmclean.sql which available in the metalink. Please stop the concurrent manager before run this sql query
6. Are all the concurrent request changed into pending:normal? I mean, whenever we submit the requests all the requests getting pending:Normal?
regards,
Pandian

Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
DELL Windows XP Pro

Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

Concurrent Manager encountered an error while running Oracle*Report

Hi,
I Ran a request and request is erroring out.Request ID 2727080
when i tried to review the log message it says
ar60run: relocation error: /apps/visora/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
I'm attaching the log file below. Please suggest me the possible outcome.
Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INVORGES module: Organization Hierarchy Exceptions Report
Current system time is 22-FEB-2008 12:37:32
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_LEGAL_ENTITY_NAME='India_Legal'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 17600
ar60run: relocation error: /apps/visora/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 127
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2727080.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 22-FEB-2008 12:37:32
Thanks
Amith

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

11.5.10.2 Windows XP installation - Concurrent Manager not working

I have completed the 11.5.10.2 installation on windows XP without any issues. However, concurrent manager even though it starts but when I submit any request, "no active manager" displays in the requests window.
I tried if anyone had issues in this forum and found that I need to run autoconfig but that has not helped.
The following steps are being already tried but with no luck:
1. Stopped all application tier services (apache, fulfillment, forms etc)
2. Ran \oracle\viscomn\admin\scripts\<VIS_Server>\adautocfg.cmd - it completed successfully
3. One of the threads in this forum said "OracleVISOra806_2TNSListener80APPS_VIS" must be running in order for CM to work - it was not running and attempted to start but could not.
Here is the log file info for "OracleVISOra806_2TNSListener80APPS_VIS" service:
System parameter file is E:\oracle\visdb\9.2.0\network\admin\<VIS_Server>\listener.ora
Log messages written to E:\oracle\visora\8.0.6\NET80\log\apps_vis.log
TNS-01151: Missing listener name, APPS_VIS, in LISTENER.ORA
Thanks in advance..

As I ran autoconfig, it has set the service to start automatically...this is the service name I'm referring to: OracleVISOra806_2TNSListener80APPS_VIS
8.0.6 listner.ora
APPS_VIS =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= pravdhir)(Port= 1626))
SID_LIST_APPS_VIS =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM )
( ORACLE_HOME = E:\oracle\visora\8.0.6 )
( PROGRAM = E:\oracle\visappl\fnd\11.5.0\bin\fndsm.exe )
( ARGV0 = FNDSM_VIS_pravdhir )
( envs='MYAPPSORA=E:\oracle\visappl\APPSVIS_pravdhir.cmd,FNDSM_SCRIPT=E:\oracle\viscomn\admin\scripts\VIS_pravdhir\gsmstart.cmd' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = E:\oracle\visora\8.0.6 )
( PROGRAM = E:\oracle\visappl\fnd\11.5.0\bin\fndfs.exe )
( ARGV0 = VIS_pravdhir )
( envs='EPC_DISABLED=TRUE,NLS_LANG=American_America.UTF8,APPLFSTT=VIS_BALANCE;VIS;VIS_806_BALANCE;VIS_FO,APPLFSWD=E:\oracle\visappl\admin;E:\oracle\viscomn\temp;E:\oracle\viscomn\html\oam\nonUix\launchMode\restricted')
STARTUP_WAIT_TIME_APPS_VIS = 0
CONNECT_TIMEOUT_APPS_VIS = 10
TRACE_LEVEL_APPS_VIS = OFF
LOG_DIRECTORY_APPS_VIS = E:\oracle\visora\8.0.6\net80\admin
LOG_FILE_APPS_VIS = APPS_VIS
TRACE_DIRECTORY_APPS_VIS = E:\oracle\visora\8.0.6\net80\admin
TRACE_FILE_APPS_VIS = APPS_VIS
IFILE = E:\oracle\visora\8.0.6\network\admin\VIS_pravdhir\VIS_pravdhir_listener_ifile.ora
9.2.0 Listner.ora
VIS =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= IPC)(KEY= EXTPROCVIS))
(ADDRESS= (PROTOCOL= TCP)(Host= pravdhir.dp.com )(Port= 1521))
SID_LIST_VIS =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= E:\oracle\visdb\9.2.0)
(SID_NAME = VIS)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\visdb\9.2.0)
(PROGRAM = extproc)
STARTUP_WAIT_TIME_VIS = 0
CONNECT_TIMEOUT_VIS = 10
TRACE_LEVEL_VIS = OFF
LOG_DIRECTORY_VIS = E:\oracle\visdb\9.2.0/network/admin
LOG_FILE_VIS = VIS
TRACE_DIRECTORY_VIS = E:\oracle\visdb\9.2.0/network/admin
TRACE_FILE_VIS = VIS
ADMIN_RESTRICTIONS_VIS = OFF
IFILE=E:\oracle\visdb\9.2.0\network\admin\VIS_pravdhir\listener_ifile.ora
As the system parameter is set to 9.2.0 directory and it is trying to find APPS_VIS entry which is not found in 9.2.0 Listner.ora file and hence erroring out.
I tried the following:
1. I copied the contents from 8.0.6 listner.ora file and added into 9.2.0 listner.ora file.
2. Rebooted
3. OracleVISOra806_2TNSListener80APPS_VIS > service started successfully
4. Started 9.2.0 listner service (OracleVIS_db920_RDBMSTNSListenerVIS) and Oracle Service manually
5. I ran autoconfig
6. I started all the application services manually
It worked but I don;t know where else the application will fail. So far so good. But is this the right procedure?
one more question? Do I need to run autoconfig after every reboot?

The PSE 10 process doesn't stop after closing the application. Why??

On Windows 7, the PSE 10 process doesn't stop when closing the application, therefore the PSE 10 app. will not restart once it is closed. The user must stop the process from task manager or reboot before PSE 10 can be restarted on a Windows 7 machine. The forum suggestion to double-click the exe (instead of the shortcut) as a solution, obviously isn't a solution and can't work. There are no updates to PSE 10 and the only access to any support is through this forum. There have been complaints about this on blogs all over the Internet. Why can't Adobe come up with a fix/update or if they have where is it posted?

First of all, there is no difference between the files on the disk and those downloaded as the trial. The only difference is that one comes with a serial number and the other does not. You can put your serial number into the trial version and it will then be activated. The only way the disk would behave differently is if there is some physical flaw (scratches, warping, etc). Usually such damage will cause the installation to fail, it's pretty difficult for such damage to modify the files in such a way that they still install but behave differently.
If you are dropping a file on the shortcut and the Photoshop Elements Editor is opening but the file is not, there could be a few different things going on there. Check your shortcut properties first: does it go to PhotoshopElementsEditor.exe or Photoshop Elements 10.0.exe? If the former, then there are probably some missing support files. If the latter, this is the Welcome Screen, which has likely been configured to launch the Editor automatically. However, you would be sending the file to the Welcome Screen, which doesn't do anything with the file. It is not capable of passing the file off to the Editor, only capable of launching it.
Also, double-clicking a shortcut is generally the exact same thing as double-clicking the file the shortcut points to, but you can add modifiers to shortcuts to make them behave differently.

CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ？hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1

What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein

Generating pdf report via concurrent manager and xml publisher

I have report (rdf) which works fine in eBusiness Suite but Id like to create translatable reports with reach layout (comparing with the Report Builder) based on the functionalities of the XML publisher. Ive made all necessary steps (first change the output format for that report in concurrent manager from pdf to xml, submit the report to get xml file, which Ive used in Microsoft Word Template Builder to make layout in rtf file, and create data and template in XML Publisher Administrator in eBusiness Suite).
When Ive submitted that report from concurrent manager, after the concurrent manage finished his job I got the warning message.
Also the output file is not generated and in log file there is a message: One or more post-processing actions failed. Consult the OPP service log for details.
Concurrent manager works fine, but there are problem when concurrent manager send the xml output of the report to XML Publisher which have to create pdf layout based on rtf template.
I think there might be a problem with report complexity, while Ive used layout formatting, api calls to eBusiness Suite, parameters, placeholders, attached library etc.
If it is impossible to get new report based on xml publisher template, what is the purpose of xml publisher if it is so limited, while every eBusiness Suite Report is so complex.
I hope there will be a person on this forum with the same problem, otherwise Ill give up at all from XML Publisher, at least until it come a better version of that tool which it seems to be in early development phase and not ready for the market yet.

All of the complex report logic is handled in your Oracle Report (rdf) file.
If your Oracle report is working OK, then this report should be generating XML.
After running your report, go to the View Requests window. Highlight your request, and click the Diagnostics button. Then click the 'View XML' button. If you see XML data, then you should be OK.
When I faced a similar issue, it was because the '1 step' process didnt work for the particular report I was using. The '1 step' process doesn't work for every report. Which report are you using?
If the report is submitted via a form (not the concurrent manager request form), then you probably need to use 2 steps to produce the desired output.
For more information, see the following thread:
Enhancment to avoid 2 step check printing
HTH,
Mark K

Concurrent Manager Issue in Oracle Apps 11i on MS Windows 2003

Hi,
We have Oracle Apps 11i (11.5.10) on Windows 2003 running Oracle Financilas and Supply Chain.
From this morning onwards, concurrent requests are not getting completed. All requests are showing Running Normally. I checked the server (Single Node 4 GB Memory) and CPU usage is more than 90%. Task Manager is showing 50% CPU usage for SYSTEM (Image Name). Once the CPU usage for SYSTEM(image name) goes beyond 40% then the server is becoming slow and the problem starts.
When I stop the Concurrent Manager it does not stop and I have to End Process the FNDLIBR process manually.
I have recreated the concurrent manager using CCMSETUP and also ran cmclean.sql. Nothing is helping.
System is Live since 2006 and the issue started only today.
Please suggest any solutions as this is happening in our Production system.
Thanks.
Thiru

Thiru,
Which concurrent manager consumes the CPU usage? Are you able to identify it?
Any errors in the CM log file? Did you try to start the CM with diag=y and see if any errors are reported in the log files?
What happen to the CPU usage when you stop the CM?
I assume that you are running Purge Concurrent Manager/Requests on regular basis, so this should not be an issue here.
Please review the following notes, and see if it helps.
Note: 114380.1 - Concurrent Manager Processes Taking Lots of CPU
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=114380.1
Note: 264752.1 - FNDLIBR Consuming Memory Causing CPU Utilization To Increase Daily
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=264752.1
System is Live since 2006 and the issue started only today.I assume no changes have been done recently, correct?
Regards,
Hussein

Could not activate Internal Concurrent Manager

Hi all,
I downloaded ebiz suite from edelivery and installed it on my stand alone xp system, giving a random domain name during installation (and editing the etc/hosts file before that). For some reason I couldn't activate ICM in windows services folder listed as OracleConcMgr_VISLocalhost. I manually tried to start the service by clicking on start, it starts up and stays there for 10 secs and then shuts it self down. I even tried starting the ICM by running 'adcmctl start apps/apps'. But it simply exits with a status 0, and it doesn't generate any log file in viscomn/admin/logs/vis_localhost.
The output for the above command:
Starting concurrent manager for....
adcmctl.cmd exiting with status 0
I've also tried cmclean.sql. Please help me in solving this issue as all my request are in 'no manager available' status. I even tried re installing the apps but it still gives me the same error.
Thanks
Suneel

Fadi Hasweh, you rock!!!
It works!!!
Wierdly the tnsnames.ora file is located under F:\visora\8.0.6\NET80\ADMIN\VIS_localhost directory . I added the entries as you suggested and restarted the system. And that earlier error doesn't show up any more.
Now I got a new error when I try to run a report:
+---------------------------------------------------------------------------+
Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ARXCTA module: Adjustment Approval Report
Current system time is 27-FEB-2007 11:06:31
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORDER_BY='Adjustment Name'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
LOG :
Report: F:\visappl\ar\11.5.0\reports\US\ARXCTA.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
ERR REP-3002: Error initializing printer. Please make sure a printer is installed.
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2719522.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 27-FEB-2007 11:06:31
---------------------------------------------------------------------------

Internal Concurrent Manager deactivated.

Hi
Iam working on setting up R12 instances on Amazon Cloud Virtual machines.
After running post clone steps when I check the concurrent managers - manage screen I see old node name. How to update this with the new node name.
Also after changing the node name the internal concurrent manager is in deactivated state, How to get this activated.
Pls let me know how to resolve the issue.
Sree

After running post clone steps when I check the concurrent managers - manage screen I see old node name. How to update this with the new node name. You can update TARGET_NODE column in FND_CONCURRENT_QUEUES table from the backend.
Also after changing the node name the internal concurrent manager is in deactivated state, How to get this activated. From the application (as mentioned above by Taher) or stop/start the CM using adcmclt.sh script.
Thanks,
Hussein

Addstpall.sh doesn't stop concurrent manager

Similar Messages

Maybe you are looking for