ADDT Code issues with w2k8 IIS7/FastCGI?

Has one else experienced any issues with the ADDT Dynamic List code not working with IIS7/FastCGI on w2k8?
Fresh install of 2k8 ent, w/iis7 and fastcgi running. Most applications work just fine but there semes to be issues with pages that have ADDT dynamic list/forms. IE when you try to click on edit from the list it takes you to a blank form insted of the individual record.

Thread moved to Dreamweaver Application Development forum.

Similar Messages

X99S GAMING 9 AC Not booting - Debug 94 code - Issue with GTX 980 SLI in WoW

Hello, I bought the X99S GAMING 9 AC motherboard but have ran into some issues.
The computer won't boot when I put my second MSI GTX 980 Gaming 4 GB card in the last PCEI 3.0 port (PCIE port 5) and I get the debug LED message 94 on the motherboard. I have a SLI setup.
The first card I have in the second PCIE 3.0 port due to the Noctua U14S CPU fan takes up space for the first slot. So I have been running my grafic cards in PCIE slot 2 and 4 with some issues.
First the card in slot 2 gets really warm over 86 celsius. And second: SLI runs really poorly in World of Warcraft. I get a lot higher performance with just one card activated. I am not sure if it's cause I am not running my cards in the recommended PCIE 3.0 ports or because WoW has some issues with SLI, but I heard other people have no issues at all with WoW in SLI.
I got the same issue with 3Dmark firestrike, the cards perform really poor in SLI. I get higher score with SLI turned off..
Though SLI seems to run pretty well in 3dmark 11 and Diablo 3 Reaper of Souls.
But the main issue right now, is that the computer won't boot with the grafic cards in PCIE port 2 and 5. The solution to run them next to each other is not good, cause it gets really hot and I get bad performance in WoW and Firestrike.
Picture of my setup before I switched places with the grafic cards as you can see, it is really tight:
Any upcoming bios updates (got v1.3) that will solve this issue on the horization? Hopefully this get sorted out really soon..
My whole computer setup:
Intel i7 5820K | MSI X99S Gaming 9 AC (bios 1.3) | SLI MSI GTX 980 Gaming 4GB | Samsung 850 Pro 512 GB | WD Red 4TB | G.Skill Ripjaws DDR4 3000MHz 4x4GB | EVGA SuperNOVA P2 1000W | Noctua NH-U14S PnP | Fractal Design Define XL R2 | 5 Noctua NF-A14 PWM 140mm fans | Windows 7 Pro 64 bit

You must use the recommended PCIE slots as the manual says for your CPU type, PCIE #1 and PCIE #4 if I remember, just open the manual :P for optimal 2Way SLI, also your 5820k will limit to 28 pcie lanes only if you plan to add more vgas...the other problem is your giant CPU air cooler blocking PCIE#1, do a favor to yourself, buy a watercooler for your 5820k and your problems are gone, add some overclock in your system, low noise and better temps.
Here I use 3x980 in SLI with X99S Gaming 9 AC, going soon to WC the VGAs with EK blocks.....3way is far more temperature critical than 2way spaced one.
Cheers

Issue with scanners beeping on over picking material code

Hi ,
I have an issue with scanner beeping.User is working is Z tcode .
The followings are related steps.
(1)If the user does over-picking the material code , an “information” window like below is displayed, however, no beep sound is produced.
Information. Material code, ABC!@#% already updated for Delivery 1ASEDFD.
(2)Since the user has heard no beep sound, the user is unaware of the over-picking and scans the next item.
(3)Then, in case of XP PC, a louder noise, a kind of buzzer is generated, while in with Windows 7 PC, a small noise, a kind of chime is made.
(4)With Windows 7 PC, due to the small sound, the user continues the next step, being unaware of the over-picking. This has a risk of causing errors at the shipment: eventually, it impacts customers.
The requirement is beep sound will be heard on over-picking also.
Please suggest in this regard.
Thanks,
Harsh

Hi Harshavarddan,
there is some example on forum for generating beep sound with the use of the OLE Objects:
Try this code:
TYPE-POOLS: ole2.
DATA: return TYPE i,
       sapinfo TYPE ole2_object.
DATA: BEGIN OF command,
         command(12) TYPE c VALUE 'cmd /c echo ',
         hex07(1)    TYPE x VALUE '07',
       END OF command.
START-OF-SELECTION.
   CREATE OBJECT sapinfo 'SAPINFO' NO FLUSH.
   CALL METHOD OF sapinfo 'EXEC' = return
     EXPORTING
     #1 = command
     #2 = 0.
FREE sapinfo.
Regards,
Angelo.

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

Issues with Code 39 Font

I am using Crystal Reports XI and have created reports that contain a single barcode. When I export the reports to a PDF format while in the designer preview the report exports fine with the barcode showing correctly. When I publish the report and automate to send to a file folder and a designated printer, both reports are printing without the code 39 Font and the barcode shows in regular Arial font. I have installed the Font both on my personal machine and the server that the reports are published too. To verify that the problem was not isolated to the PDF doc I tried printing to a word format and the report prints the code 39 font in the word doc that is stored in the file folder, but the printed report is still showing as a regular Arial font. Sending to the same printer from the designer preview printed the barcode font so the issue is also not at the printer level. Can anyone advise on the best action to take to resolve this issue with the missing Font in the printed report? Do I need to do anything special to embed the Font in the distributed report? Any help that can be provided is greatly appreciated. Thank you in advance.

Hi Greig,
Did you get your problem figure out? I'm having the same issue. Please let me know how you got this problem resolve. Thanks

An issue with DigitalColor Meter and HTML codes

First off, I apologize if this is in the wrong area; it seemed to be the one most closely related i could find.
I've been using the Mac's DigitalColor Meter program for ages now to grab color codes for my web design work. Until recently, it was fine; find the color you need, shift-command copy it, then paste it into the HTML source code as appropriate. Simple as pie.
Roughly a month or two ago, however, I realized I was having issue with it. I could still copy-and-paste the hex code as normal, but suddenly it wasn't showing up correctly when viewed in soem browser, but fine in others. After a lot of hair-wringing and experimentation, I discovered that (presumably) something had changed with the way DCM copied/pasted its hex code.
When I paste the code, it is inserting invisible characters after each pair of letters. It took me forever just to figure this out, as they were, well, invisible. I couldn't see them in my text editor, but when I used the arrow keys to move along the hex code as pasted, it would pause appropriately each time I got to those points. A friend of mine looked at the code in his (PC-based) text editor, and clearly saw the extra characters, altho it doesn't show up in any of my mac-based ones.
What he saw: "#ab cd ef "
What I see: "#abcdef"
This is, as best I can tell, a recent development, and I'm not sure what prompted the change? Since different browser are interpreting the 'invisible' characters differently, it's causing me to have to manually type in the hex code after finding it in DCM to ensure no extra characters sneak in. Not a big deal, but annoying nonetheless.
Any ideas out there as to why this has started happening? Any way to correct it? DCM was a staple of my web-working tools, and it's disheartening to have to handle things in the current way.

Unfortunately it seems that this issue is a "feature not a bug". In tiger it used to work fine: you could paste into photoshop or a css file and it would work. It got changed in Leopard because Apple engineering decided that it was better coding practice to treat each hex value as "word" thus delineating it with these infuriating invisible characters. If you copy and paste into BBEdit on leopard and tiger machines you will see the difference.
There might be a way to make an automator action that can strip these characters out when pasting. Another option includes using the less graceful (though you can manipulate the colours further after selecting) built-in color chooser and the HexColorPicker extension to it (google for download). You can write a script and save as an application to run the apple colour chooser as a stand alone.
Open script editor and type: choose color
Save as app, add nice icon and that's it.
Xscope looks a bit overboard for my taste, plus its mo' money! Better invested into Pathfinder or something.

Issue with LACP on SRW2008 with W2k8

Hello,
I'm trying to configure the LACP for W2k8 and I have strange thing :
My network is :
1 SRW2008 with
a Synology NAS connected with LACP
my PC running under W2k8 with LACP
1 another PC with single
1 Router running with DD-WRT fw , used for DHCP , WIFI and for the internet connexion
I have a Dual NIC Intel and the LACP is active on my PC w2k8 , I can see my network connected at 2 Gb/s. I can surf ping the swr2008 , my router and my printer connect by wifi. I cannot ping the other PC and my NAS connected to the srw2008.
when I disconnect 1 cable of my LACP of my PC I can ping everything
if I configure w2k8 not with lacp but with ALB I can ping everything
my question is :
How to configure LACP 802.3ad on w2k8 and have the ping working to the other system connected to the srw2008 ?
Thanks a lot
Emmanuel

Steve,
Are you having an issue with incoming or outgoing mail?
If the issue is with outgoing email this article may be helpful:
http://docs.info.apple.com/article.html?artnum=305634
If you are using an IMAP server provided by your employer, you may not be able to access the server without VPN.
Hope this helps,
Nathan C.

Is Muse compatible with Email Service Providers. I found html code issues - PCs have viewing issues

Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

Adobe customer service wont adress issue with 3 month free trial activation code

I bought a Sandisk HDHC card from Fryes.It have an activation code for 3 free months freee Creative Cloud and /Lightroom.When I tried the code it was invalid.When I tried the online chat,they gave me a lot of ********.Will I get the 3 months or will I post this on every SOCIAL MEDIA SITE?.ADOBE NEEDS TO WISE UP!!!

Its an ADOBE advertisement with their name on it.Product has activation code with it and is still valid.Adobe WONT LIKE ME by the time its over.
From: ssprengel <[email protected]>
To: al conlon <[email protected]>
Sent: Monday, January 12, 2015 10:32 PM
Subject: Adobe customer service wont adress issue with 3 month free trial activation code
Adobe customer service wont adress issue with 3 month free trial activation code
created by ssprengel in Adobe Creative Cloud - View the full discussionI would call Fry’s about it, not Adobe. You didn’t pay Adobe, you paid Fry’s, right? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7090387#7090387 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7090387#7090387 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Issue with Google Analytics Character Encoding (Contribute changes the code)

I am wondering if there are any admin settings to work around this issue. This is an issue with Contribute CS3/CS4.
Editing a page in Contribute turns encoded characters into unencoded characters. For example, turning "%3C" into "<". Encoded version has no errors.
Un-encoded characters in Google Analytics code causes Scripting Errors on each page you open in Contribute, make loading slower, and make it difficult just to browse the site using Contribute.
Specifically changing this:
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
to this:
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("<script src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'></script>"));
</script>
(I believe it is the double </script></script> that might be causing the error to pop up.)

Set the link encoding option as "Insert Links As Is", under Administer website dialog.

163; There seems to be an issue with the template that the site is using as there is a code to replace the pricing.

163;
There seems to be an issue with the template that the site is using as there is a code to replace the pricing.
<script>
// Script to extract the currency and decimals from the price
var price = "{tag_saleprice}";
var priceWithoutCurrency = price.replace( /^\D+/g, '')
var decimals = priceWithoutCurrency.substring(priceWithoutCurrency.length - 2, priceWithoutCurrency.length);
var roundedPrice = priceWithoutCurrency.substring(0, priceWithoutCurrency.length - 3);
$('.image-with-price.big span').html(roundedPrice+'<sup>'+decimals+'</sup>');

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post.<br>
<sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

Issue with creation of a specific field for a java program.

Hey everyone,
This is homework which is end of chapter "challenges" to practice what we've learnt.
The chapter covers inheritance (super class and all things related)
I'm having quite an annoying issue with the very beginning of the instructions, where it tells me to make the following fields:
- Employee name
- Employee number in the format XXX-L , where each X is a digit within the range 0-9 and the L is a letter within the range A-M.
- Hire date
This is what I wrote for code so far
private String name;
//private WTF
private String date;I really have no idea what to do for the second field, how to even constrain integers and letters in the same field with a rule for number range and letter range, and that for each character independently, for what I understand.
Any advice with this? It's blocking me from continuing -_-, because I can't make accessors and mutators and constructors, etc, if i'm still unsure of how the fields unfold.
Thanks in advance.

You can create a HireDate class.
public class HireDate{
   private final int day;
   private final String month;
   private final int year;
   public HireDate(int day, String month, int year){
      this.day = day;
      this.month = month;
      this.year = year;
}In the HireDate Constructor you could put if statements to ensure that only correct information is present. The fields are final because the hire date will not change. Override the toString() method so that when you print it out it will be in the correct format. Create some getter methods to get the private fields.
Then in your other class just do this
HireDate hired = new HireDate(10, July, 1991);Now you have an object that stores all 3 fields for you. You can use the object as you like and when it prints it will be in the format you want.
Or you could just make hireDate a String variable. That is what I always did and I never lost marks for it. The reason I suggest this way is because you mentioned rules and constraints.

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

ADDT Code issues with w2k8 IIS7/FastCGI?

Similar Messages

Maybe you are looking for