ADE 2.0 does not open 'older' ACSM files

I found many questions/help requests re opening ACSM files -- but none like this.
I have a number of ACSM files that are several years old and I no longer have data re where/how they were obtained.  I recently lost the 'My Digital Editions' folder but did have the ACSM files backedup.
I installed ADE 2.0 and it works fine with ebooks downloaded from Adobe.  However it will not open any of the ACSM files that I had saved.  Each gives the error:
"Unable to download. Error getting license. License server. E_ADEPT_NO_TOKEN."
Can anyone help me understand what the error means and/or how to corect the situation so I can retrieve my ebooks?

There are lots of bugs in ADE2.0.  Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
Make sure to authorize your 1.7.2 with the same userid you used before for V2.0

Similar Messages

  • Finder does not open when a file passes over (mac os X 10.8.3)

    Just installed mac os 10.8.3 mountain lion. As such, it seems with this OS X version the "finder" does not open when a file passes over (in order to move it from desktop).
    The screen dims a little and nothing else happens.
    How can I recover the "finder" functionality that apparently doesn not exist anymore?
    Is it something wrong that I am doing?
    Regards
    José

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Safari 5.1 does not open local html files

    Safari 5.1 does not open local html files (with .htm or .html extensions). It fails on files that previous versions of Safari opened. Firefox continues to open them. Any suggestions?

    Turn this option off:
    Regards,
    Colin R.

  • TS1702 Keynote occasionally does not open a .pptx file (came in as an attachment). Keynote say 'not enough memory, yet half of my 64GB is available? File size is 2.5 MB.

    Keynote occasionally does not open a .pptx file (came in as an attachment). Keynote says 'not enough memory, yet half of my 64GB is available? File size is 2.5 MB.

    The Adobe PDF printer is no longer available in Snow Leopard. This is an announce to this fact at the entrance to the Acrobat Macintosh forum. The old methods for doing what you want will not work in Snow Leopard. I recommend you look at Quite Imposing. It can do everything you want and more. Alas, it comes at a price.

  • Web.show_document on XP SP2 does not open a .csv file

    XP SP2
    XE db
    Forms 10g (9.0.4)
    form90.conf:
    AliasMatch /query_exports/(..*) "C:/mydir/query_exports/$1"
    .csv file creation statement:
    lv_ext_dir := 'query_export/';
    lv_file_id := text_io.fopen(lv_ext_dir||lv_file_name,''w');
    so far so good. the file is created and written to.
    text_io.fclose(lv_file_id);
    now, the open of the file created:
    lv_temp_dir := 'query_exports/' -- note same value as above
    web.show_documents(lv_temp_dir||lv_file_name);
    at this point a new browser window is opened with HTTP 404 Not Found error. The URL is:
    http:/local_machine:8888/forms90/query_exports/"lv_file_name"
    if I go the following:
    lv_temp_dir := 'file:///c:/mydir/query_exports/'
    web.show_documents(lv_temp_dir||lv_file_name);
    The new browser does not open and I do not get an error. The file is still written to.
    If i use:
    lv_temp_dir := 'query_exports/' -- note same value as above
    web.show_documents(lv_temp_dir||lv_file_name);
    and the new browser open with the HTTP 404 Not found message and I manually type in:
    file:///c:/mydir/query_exports/"lv_file_name",
    The .csv file opens correctly.
    Why is this behavior happening?
    TIA for any help you can provide,
    Ed.

    Whats the machine name ?
    Add the machine name/networkdomain name as a trusted site under
    Internet Explorer ->Securitysettings
    Rajesh ALex

  • Photoshop CS6 suddenly does not open a tif-file

    ... which I just created in the same Photoshop CS6 half an hour ago. The error message when opening says: "Der Vorgang konnte nicht ausgeführt werden, weil diese Datei nicht mit dieser Version von Photoshop kompatibel ist." (could not open because this file is not compatible with this version of Photoshop). The tif-file has more than 10 layers and is about 150 MB big. There was absolutely no error while saving the file in the first place. I already tried opening in 64 and in 32 bit version.
    How can this be and how can I get back or repair my file?
    Thank you very much in advance!!!

    Try opening it in another program like CorelDraw or a simple image viewer like IrfanView.
    Mylenium

  • Edit in Photoshop CS4... does not open the selected file.

    Sorry if this is an old topic, but I can not seem to find the answer and I was hoping someone here might know.
    When in Lightroom (2.2 or 2.3) if I select "Edit in Photoshop CS4..." or any of those dropdown commands, Photoshop opens....and that is it. The selected photo from Lightroom is NOT opened/merged/panoramaized. duuh. frustrating.
    So I re-installed Lightroom, updated to the 2.3, re-installed CS4. all with the same effect that Photoshop opens, but the selected file is NOT opened.
    Has anyone experienced this? Any solutions?
    Thanks in advance.

    When you remove the obvious,
    that which is left must therefore be the truth -- Sherlock Holmes
    Short version:
    When I created a new lightroom catalog, and imported a single, standalone file, It worked fine. But when I imported to the new catalog, any photos from my existing catalog, it would fail.
    Turns out that I was doing something a bit out of the ordinary with the IPTC Copyright field. In order to make my copyright information look "different" when I would export a file.
    One would normally put in that field something like "© 2009 someone". I discovered a few months ago that I could make this field display as a multi line entry.
    ie.
    if you wanted to put XY into the copyright field, but wanted it to display as:
    X
    Y
    all you would have to do is to put a carrage return between the two characters. (hint ctl^enter). Now when you displayed the "copyright" in an output file, it will display
    vertically instead of all the characters in a horizontal line.
    After being frustrated by this for a couple of weeks, I simply started removing every option that I might have applied to photographs that I would import with Lightroom. One of the last ones was the "vertical" information I put in the copyright field in a Preset. (when you remove the obvious...).
    Funny thing is that no program really cares about the formatting of that field, or if it has multiple lines in the data, or special characters.......It even opens up just fine in Photoshop / Gimp / PSE / etc. with no problems.
    But, if you have multiple lines of data in the Copyright Field (and I suspect others as well),
    AND you want to open up the file from Lightroom in Photoshop, using the standard menu item of " Edit with Photoshop CS4", for some reason Photoshop will start, but never open the designated file. I would expect some parsing something just giving up after it encounters a CR.
    But.....All is well that ends well. Now I can quit obsessing, and move on to something else...
    Best,
    Jim

  • Elements 12 does not open nef raw files depsite having latest raw plug-in

    Help please - wasted far too much time trying to open my raw files with recently purchased elements 12. I have tried to ensure all software is up-to-date but still the message that the raw file is not supported appears when I try to open with Camera Raw . The files open in nikon software and windows.  My camera is a Nikon D7100.

    As a test, try copying a nef file from your camera to computer without using nikon transfer and see if it opens in pse 12.
    Which version of windows are you using?
    If in the photoshop elements 12 editor you go to Help>About Plug-In and click on the words Camera Raw, what version does it say?

  • Bridge does not open Photoshop CC files

    When I try to open a photoshop cc file in Bridge I get a message that says " Windows cannot find C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Photoshop.exe Make sure you typed the name correctly and then try again.  Even though The last version of CS I had was CS6 and even though the file I am trying to open was made with Photoshop CC.
    I checked my startup scripts and there does not appear to be one for PhotoshopCC.  Where do I find them and how do I get them to install properly?

    I noticed that there are still adobe folders for photoshop and premiere on the computer. Should I just delete those folders?
    Use Easy Find (Devon) and run Adobe in search field. From the list select the folders that you have doubt about and choose Show in finder option. Then look at the content. If it are custom settings like actions, tools, brushes best keep them save.
    But to be totally on the save side select all search result and copy them to a separate disk as Back Up so you can always find some lost customized settings back. All other deleted files should be reinstalled as per new install on new disk.
    I would like to get it right this time. I was also wondering if I can still download the dmg directly from adobe or is that not available anymore.
    If you have bought a download version of the Master Collection for CS6 then their should be a possibility to download it again using your Adobe ID. The new CC can be downloaded again using ACC.
    Otherwise you have to contact Adobe customer support for a new copy or download.

  • Bridge does not open camera raw files

    I am having this issue with the bridge not opening cr2 files in acr. I have a new mac and installed CS6 with 7,4 acr. Has anyone come up with a solution to this bug?
    The error message is :
    camera raw editing is not enabled camera raw editing requires that a qualifying product has been launched once to enable this feature
    I really would prefer to not uninstall this product and it is not the case that I have another trial copy. I have searched my computer and cannot find any.
    Thanks for any new ideas on this bug.

    I noticed that there are still adobe folders for photoshop and premiere on the computer. Should I just delete those folders?
    Use Easy Find (Devon) and run Adobe in search field. From the list select the folders that you have doubt about and choose Show in finder option. Then look at the content. If it are custom settings like actions, tools, brushes best keep them save.
    But to be totally on the save side select all search result and copy them to a separate disk as Back Up so you can always find some lost customized settings back. All other deleted files should be reinstalled as per new install on new disk.
    I would like to get it right this time. I was also wondering if I can still download the dmg directly from adobe or is that not available anymore.
    If you have bought a download version of the Master Collection for CS6 then their should be a possibility to download it again using your Adobe ID. The new CC can be downloaded again using ACC.
    Otherwise you have to contact Adobe customer support for a new copy or download.

  • Photoshop does not open the requested file

    Hi,
    I installed the cs5 fxg ext. with extension manager on Mac OS X 10.6.3.
    I think that went ok.
    But... In catalyst (cs5) I have imported a jpeg file and want to edit it with photoshop. Catalyst gives the message "editing selection in photoshop jadaa jadaa"
    It starts photoshop, but my picture is not opened in photoshop (also cs5)...
    What's wrong?

    I have the exact same problem...

  • ADE is not opening my .ACSM files and not letting me DEAUTHORIZE

    So I am trying to download an e-book from my university's library and am unable to open it on Digital Editions. I downloaded Abode Digital Editions as it was instructed to do so on my library website. So I downloaded the file and tried to open it on ADE but was met with "Error. Check Activation!" notification. After looking up online I tried everything from deauthorizing/reauthorizing, uninstalling, unblocking the files and downloading an older version and I restarted the computer too.
    Nothing worked so I kept searching. Many users kept insisting that Ctrl+Shift+D worked for them and so I gave it a go another time but unfortunately, I find myself am unable to deauthorize. Because every time I time my password it says "Unable to Erase Authorization.
    Please try after some time." Please I really need some help because I don't want to fail and the textbook prices are sky high.
    Please and thank you! -hugs-

    To all those who are using V 4.0.3 and are unable to de-authorize using the de-authorization window and keep getting the message , please try de-authorizing in the article mentioned in the below link:
    Error "E_AUTH_NOT_READY" | Digital Editions 
    (step 5 if using mac and step 8 if using win are the important steps)
    Important Note: Please DO NOT follow the steps mentioned in the link if you have authorized your computer with multiple ID's and you don't remember all the passwords. Following the steps mentioned in the above link will de-authorize all authorized accounts on your computer. So, do not proceed if you don't remember the password(s).

  • IMovie 10.0.8 does not open older iMovie .rcproject files

    I have tried to "Update Projects and Events" and also tried to "Import Media", but remain unable to open projects in iMovie 10.0.8 with file extension .rcproject that were created with iMovie 9.0 and identified as "iMovie Project" files in the Finder. They are dimmed whenever I try to use iMovie 10.0.8 to open them.
    In the process of trying to move back to iMovie 9.0, I can open iMovie 9.0 and while the projects appear on the list of Projects, they are not apparently incomplete and "Source clip is missing" message appears where the viewing screen should show the video. They will not play in 9.0, and therefore no editing is possible.
    Did I read that once "converted" to iMovie 10.0.8 that files would no longer be recognizable by the older iMovie?
    I have numerous projects created with iMovie 9 that seem to be somewhere in limbo:
    Neither iMovie 9.0 nor 10.0.8 will open them.

    Thank you GeeD. I'm still stymied.
    I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
    When I open iMovie 10.0.8, the Events and Projects Folders are empty:
    When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
    Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
    Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
    [As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
    Back to the update of version 9.0 to 9.0.9.
    Presumably because I have version 10.0.8 installed, I got this alert box:
    So, I cannot update version 9.0
    and I cannot "Update" the Events and Projects created in version 9.0.

  • Photoshop CS6 does not open or create files

    I am using Adobe Cloud. And have downloaded Photoshop CS6. Using it locally.
    It was working fine.  For weeks. The application still loads without error. But if I open a file nothing happens. No error message. But no file appears. And if I try to create a new file the same thing. No error message. But no new canvas to work with. In both cases nothing appears in the layers panel.
    The Help menu gives me the option of deactivating. So I am assuming it is not an activation issue.
    Fireworks works fine. Illustrator works fine. Only Photoshop has this problem.
    I am running Windows 8. 64bit. 12gb. NVIDIA GeForce GTX 560 2gb. Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64. No optional 3rd party plugins.

    Update 03/2/2013
    I had enough I uninstalled Creative Cloud and secure wiped the Intel 520 SSD and the wiped the RevoDrive 3 X2. Installed windows 8 clean install and re-downloaded and installed all the Creative Cloud Apps.
    1. After the install was completed clicking on Photoshop CS6* causes nothing to happen. No tasks open, nothing in task manager showing photoshop opening. It's like the request just goes away.
    2. Figured maybe I need the updates, opened bridge clicked on help - updates.
    3. All products had updates and updated them all.
    4. All updates successful except for Photoshop and DynamicLinkmanager.
    Photoshop Update Failed
    Adobe Photoshop 13.0.1.1
    Installation failed. Error Code: U44M2P7
    So then I search the forums and find the option to manually download the CS6 update from Adobe.com. I did that and still nothing. 
    So in Windows 7 I could open Photoshop once per reboot and work. Now in Windows 8 I can't even get it to open.
    There has to be an incompatibility with either:
    1. Nvidia GTX680 4GB cards
    2. Nvidia WHQL Latest Drivers
    I draw that conclusion because PS CS6 has worked just fine until Nvidia Updates were installed. I know in 3D Mark III the card only reports as a 2GB and they claim it's purely cosmetic reporting. It also works fine on my Quadro 5000 card in another box.
    Unable to open Photoshop CS6 in Windows 8 Pro
    Unable to open using program Compatibility Troubleshooter Mode: Windows 7
    Unable to open images in Adobe Camera Raw or Photoshop from within Bridge. No Errors it's like the request simply disappeared.
    sniffer_GPU Report:
    Device: 0000000000312F28 has video RAM(MB): 1868
    Device: 00000000002FBB88 has video RAM(MB): 4095
    Vendor string:    NVIDIA Corporation
    Renderer string:  GeForce GTX 680/PCIe/SSE2
    Version string:   3.0.0
    OpenGL version as determined by Extensionator...
    OpenGL Version 3.0
    Has NPOT support: TRUE
    Has Framebuffer Object Extension support: TRUE
    OpenGL ok
    OpenCL ok, version=1.1 CUDA 4.2.1
    Return code: 3
    PS6 Executable Digital Signature:
    sha1 - Monday, January 7, 2013 12:36:15 PM
    System Info From Lightroom (Since PS6 doesn't open)
    Operating system:  (Build 9200)
    Version: 6.2 [9200]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 12
    Processor speed: 3.2 GHz
    Built-in memory: 65476.6 MB
    Real memory available to Lightroom: 65476.6 MB
    Real memory used by Lightroom: 159.9 MB (0.2%)
    Virtual memory used by Lightroom: 123.0 MB
    Memory cache size: 0.0 MB
    Maximum thread count used by Camera Raw: 6
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1920x1080, 2) 1920x1080
    System Hardware Specs:
    OS Drive (Intel 520 240GB SSD)
    Motherboard: Asus Rampage IV Extreme x79 Chipset
    CPU: Intel i7 3930K
    Memory: 64GB PC-2400 G.Skill
    Adobe Creative Cloud is installed on the D:\ Drive which is an OCZ Revodrive 3 X2.
    Video: EVGA GTX680 Classified 4GB Edition
    Video Drivers: Nvidia 314.07, DirectX 11.0, API Version 11.1, Clock 1110Mhz
    *Photoshop CS6 refers to both the x64 edition and 32bit edition. I've tried both.

  • Camera Raw does not open raw NEF files from D800

    I just got a Nikon D800. I have been useing Photoshop CS4. Bridge cannot "see" the raw files, Camera Raw cannot open them so of coursed PS cannot open them either. Updating did not make a difference. Is there an upgrade that will see the raw files?

    You need CS6.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

Maybe you are looking for