ADE 2 on OSX 10.8.2 fails to install

I've re-downloaded the file multiple times from Adobe's website, even gone back an installed the current AIR version and still get this error both during install and attempt to run it. (Yes, have also deleted the installed App, emptied trash and attempted the install again from a freshly downloaded zip.)
So what am I missing?

I hit the info button above on that dialogue and this is what came up:
"The app’s authorization has been revoked
Although this app was signed by an identified developer, the certificate for the app has been revoked. There may be a problem with it. The app cannot be opened.
You should check with the Mac App Store to see if there is an updated version of this app, or check with the software developer."
Really?!?!

Similar Messages

Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
Thanks

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

Pairing devices fails after install of osx 10.8.5.. It fails at my Iphone and Ipad touch during the pairing about 5 seconds after I confirm the 6 digit number. Does this make sense? Thanks for considering this.

Pairing devices fails after install of osx 10.8.5.. It fails at my Iphone and Ipad touch during the pairing about 5 seconds after I confirm the 6 digit number. Does this make sense? Whats the fix? I am moderately computer literate. Thanks for considering this.

The following entry may indicate a failing harddrive, so doing backups and replacing the harddrive may be in order.
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
S.M.A.R.T. Status: Failing <-----------
A little bit about drive S.M.A.R.T. status:
"The most basic information that SMART provides is the SMART status. It provides only two values: "threshold not exceeded" and "threshold exceeded". Often these are represented as "drive OK" or "drive fail" respectively. A "threshold exceeded" value is intended to indicate that there is a relatively high probability that the drive will not be able to honor its specification in the future: that is, the drive is "about to fail". The predicted failure may be catastrophic or may be something as subtle as the inability to write to certain sectors, or perhaps slower performance than the manufacturer's declared minimum."
http://en.wikipedia.org/wiki/S.M.A.R.T.

OSX Mountain Lion fails to install on 2009/2010 MacPro

I have a Dual Xeon dual cores MACPro and just got the new OS however it fails to install on the MACPro with the error message "Mountain Lion is not compatible with this computer"
My current OS is 10.7.4, does anyone have any imput on this issue has this been seen by anyone else?
Any help would be apreciated.

Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
I'm guessing that you have a Mac Pro 1,1 or 2,1 model from 2006/7. They cannot run Mountain Lion.

Install on MacBook OSX 10.9 keeps failing

I have tried and tried to install Adobe Reader but keep getting "Failed to install" at about 80% of the installation. Have tried several downloads with Safari and Firefox. No luck.

You can try using the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

OSX 10.8.3 failed update

The 10.8.3 update messed up my 2011 Macbook Pro good (2Ghz, Core i7)
I have no more sound drivers and I can't connect anything to the machine other than a mouse without making the machine go into some weird freeze where the keyboard backlight switchen on and off and the screen gets a blue haze from time to time.
I can't revert to 10.8.2 using Timemachine because it refuses to touch the disk and any update I try, including the combo, fails to install.
Has anyone come up with any possible fixes or hack yet?

Try an smc (http://support.apple.com/kb/ht3964) and pram reset (http://support.apple.com/kb/PH11243). Then launch into the Recovery Drive and run a Disk Repair: http://support.apple.com/kb/HT4718

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivier

olebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006

CS4 InDesign fails to install

Last night I downloaded the file ADBESTDSCS4_LS1.dmg and used Easy Install; however CS4 InDesign failed to install. I've called tech support, but the person I spoke with told me to read several articles about troubleshooting an installation using disks. She was absolutely no help. Would someone tell me how to install InDesign CS4?
My operating system is Mac OSX 10.5.8. I received no error messages. I was upgrading from CS2 InDesign. The Easy Install just didn't install InDesign.

You can try to use the CS4 Cleanscript to see if that helps. You can also fix permissions and make sure you are installing as an administrator.
http://www.adobe.com/support/contact/cs4clean.html

"Stock Photo Certificate failed to install"

I am unable to use the update feature of CS3 since removing the CS2 and CS3 stock photo components. I used Adobe-supplied software to do this, but now the Adobe Updater app gets stuck in a loop wherein it announces "Stock Photo Certificate failed to install", announces updated software and tells me about the certificate again...
How can I clean this up, please?
Running OSX 10.4.11 intel.

I know that.
The problem is that the updater can't install other updates because it hangs trying to install the certificate.

IOS 6 fails to install

iOS 6 fails to install when:
-Downloading & installing from the iPad itself (using 3 different WIFI connections on fully different ISP's)
-Downloading & installing from iTunes on 5 different PC's! (2x Windows PC's ; 3x Mac's)
-Using iTunes to perform a Restore FAILS! How ridiculous!!!
By the way this is a BRAND NEW iPad 3 out of the box! Before anyone asks, it was NEVER jailbroken.
I have come to the conclusion to blame Apple, Inc. for a corrupted download. Fix it now, or I will quickly return. Thank you!
Way to #fail apple!

I am also having this problem with my ipad 3. It's not brand new, but like you said I don't think it has to do with my ipad. The download doesn't even complete. neither to my ipad or even through itunes. I even tried downloading it directly from osx daily and installing it manually (much easier than it sounds) but no go. Said my firmware was not compatible.
Boo.

Anyconnect 3.102026 failes to install - MAC

System: Macbook AIR, 10.8.2.
After an upgrade of the OSX to version 10.8.2, the Cisco client fails to install. We receive an error message that the program failed to install. If i try to start the cisco anyconnect secure mobility client it says "No component loaded. Quitting application". Other applications installs without error on the computer.
The error message from the console-log says "Ask for assistance from the softwareproducer". Any idea what this could be?

Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
History:
I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
then reboot and run the update msi again. This also did not resolve the failure.
I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/

FP17 Pepper debugger fails to install on Chrome 42 (OS X 10.8.5)

With today's update to Chrome 42, the Flash Player content debugger for Opera and Chromium based applications – PPAPI silently fails to install. Does anyone know who needs to know? A colleague is also having this issue and they're using a later version OSX.

Hi Scott,
On Windows,
1. Uninstall Existing PPAPI Flash Player using Uninstaller on Uninstall Flash Player | Windows Page
2. Install Flash Player Debugger for PPAPI from Adobe Flash Player - Downloads Page, here you will find Download the Flash Player content debugger for Opera and Chromium based applications – PPAPI
3. Once PPAPI Debugger is Installed on your system,
In %WINDIR% [32-bit and 64-bit Windows: frequently asked questions - Windows Help]
If Win 32 Bit,Goto --> C:\Windows\System32\Macromed\Flash, here you will find pepflashplayer32_<current version>.dll
If Win 64 Bit,Goto --> C:\Windows\System32\Macromed\Flash, here you will find pepflashplayer64_<current version>.dll
Copy this file to Desktop and Rename this file to pepflashplayer.dll
Open Chrome, in the Address bar type- Chrome://plugins
Click on Details
Goto Adobe Flash Player - Version: <current version> row
Select the Location from where PPAPI Installer is been used,
Location will look something like this - C:\Program Files (x86)\Google\Chrome\Application\<current version of chrome>\PepperFlash\pepflashplayer.dll
Goto this Location
Take back up of this Plugin
Paste the Debugger Plugin
Done.
Piyush

CS5 AE and Premiere Fail to install on MBP i7

Hi,
I'm trying to install Premiere and After Effects onto new MacBook Pro, with 2.66 Intel i7 and its running OS 10.6.3.
I've tried installing the try of the Production suite and Master collection and with both I get all the App installed exept After Effect and Premiere both fail to install. I checked and it is running 64 bit so I'm a bit confused, any ideas?

Yeah, but it definitely thinks you are running on an unsupported CPU.... I would try to boot into safe mode and let OSX repair itself, maybe that helps.
Mylenium

10.6.2 failed to install due to 'nfs error', audio no longer works

macbook pro, all other updates have installed just fine, except for 10.6.2
I get this in the log:
11/10/09 3:58:15 PM com.apple.kextcache410 Created mkext archive //System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
11/10/09 3:58:15 PM com.apple.kextcache403 Failed to mount helper partition: error 0XF8DA000C (DA err# 0x0c).
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 4)
11/10/09 3:58:15 PM com.apple.kextcache403 /: trouble updating one or more helper partitions.
11/10/09 3:58:15 PM com.apple.kextd10 async child pid 403 exited with status 70
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 5)
11/10/09 3:58:15 PM installd376 PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=121 UserInfo=0x104d22740 "An error occurred while updating system extension information." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=70 "The operation couldn’t be completed. Stale NFS file handle") {
NSLocalizedDescription = "An error occurred while updating system extension information.";
NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=70 \"The operation couldn\U2019t be completed. Stale NFS file handle\"";
arguments = (
"-update-volume",
nothing is mounted (i rebooted before applying). not sure why it's giving that NFS error. it's consistent tho.. if i reboot and try the manual install of the patch, I get the same error.
after the failed patch "installed" it left my sound not working... so far everything else appears to work. any thoughts on fixing this are appreciated. i ran diskutil and 'fixed perms' and 'verified disk' ... patch still fails.

Try reinstalling the patch. If you get all the way through the installation, then see if your sound works. If not, then I suggest you do a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed.

Failed to install Creative Cloud desktop error code 1 Windows 8.1

I just recently tried to begin a trial of creative cloud in order to get access to photoshop. I really need photoshop for my school because of how powerful it is and the tools is offers. A couple weeks ago I tried to download and install creative cloud for windows 8 64-bit, and the download begins, but once it reaches around 50%, it raises an error message saying "We've encountered the following issues: Creative Cloud desktop failed to install (error code 1)". I was having problems with the internet at the time so I just naturally assumed it was the cause. So I went ahead and gave it a couple of days before I tried again. When I tried again I received the same error message at the same time. I continued to look around for a solution and trying it everyday but I have had absolutely no luck with it, and honestly am getting quite frustrated with it. I have looked everywhere for a solution, I tried the adobe clenup tool, I have checked to make sure I don't have any previous versions of adobe products on my computer, and even tried installing it as an admin in safe mode, and still nothing. I have no idea what to do next, but I know that I have to get ahold of photoshop, one way or another, and it must have the professional tools included in the creative cloud edition. Please tell me there is a simple solution and I have been blind this entire time. If there is no solution, can someone direct me to another software similar to photoshop that has access to the plug-in dDo? (I am in game development and have heard how powerful dDo is and have been dying to use it. I have also been anxious to get photoshop, but it doesn't appear to be possible without the creative cloud desktop app).

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

ADE 2 on OSX 10.8.2 fails to install

Similar Messages

Maybe you are looking for