ADE doesn't start on windows 7,

After the installation of ADE without error, I'm able to start ADE. But after restart of my PC I'm not able to start ADE. ADE doesn't start and no error messages appears.
I can see ADE started in the "Windows task" but after few second ADE dissapears.
Thank you for your help and support.
Regards

Hi, I have the same problem, did you get help???

Similar Messages

ADE doesn't start on Windows XP

Hi,
I installed ADE 4.0 on several PCs with Windows XP, but it doesn't start.
Do I need any prerequisites?
Same prblem appears with ADE 3.0
Yes, I know, XP is obsolete, but we're migrating to 7 and still run XP machines. ;-)
Thanks a lot and kind regards!

Hi, I had same problem with 4.0.2, 3.0 and 2.01. Using XP, SP3. Installing version 1.72 solved the problem and it works fine, A search engine "Digital Edition 1.72" will find you a link for it.

HP director doesn't start in Windows 8.1

Have just purchased a new desktop which has Windows 8.1 installed. Have installed the software for PSC 2175 All in one which include the HP Director to manage the printer including scanning. This worked in Windows XP but doesn't start in Windows 8.1. Have run the HP trouble shooter which says that sacn does work. Should it even though there are messages saying there are compatibilty issues.

Hello @manzagol ,
Welcome to the HP forums.
I understand that you are haveing problems with HP director and windows 8.1.
I would like to help.
In 2004 HP director was replaced by the HP solution center.
The software you are trying to use is over ten years old.
This would be why it has compatibility issues.
since you are running windows 8.1, try the HP Scan and Capture app.
This should give you the ability to scan to your computer without the HP director.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Beats audio doesn't start with windows

Hi,
beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

Hi @MadGrin
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
When I checked the driver page for DV5000 I noticed it came with either XP or Vista.
Have you checked for any HP bios updates for your notebook? If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Have you checked compatability for Windows 8.1. Windows compatibility Center
There is a option to scan your computer to check if your apps and device work.
Have you done all the updates for Windows 8.1?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

Adobe Cloud doesn´t start on windows start?

Hello,
the cloud doesn´t start anymore with windows. Settings are ok. Is there any service that must run? At the windows autostart config no entry about the cloud.
Any idea?
Thx for help
best wishes

Hi w4ll4ce,
Welcome to Adobe Forum,
There is an option in the CC preferences which turns off the Launch at startup. Go to the CC icon to bring up the window and then click on the ger icon. Now select the Preferences...command.
on the window that now displays, check the 'Start at launch' option, and close the window via red button in the upper left.
Now the CC will start at launch of the windows i.e at the start up.
Regards,
Rajshree

OracleXETNSListener doesn't start on Windows XP

Hi,
I installed Oracle Database Express 10g which includes Apex 2.1 on Windows XP Pro sp1, with the standard options.
It ran well until I stop and start my PC.
The apex home page doesn't work anymore. The raison seems to be the TNS listner which doesn't start.
Regarding similar posts on the forum, I tried multiple solutions, but it ever doesn't work.
The listener can't be restarded.
Thanks for your help.
Patrick

Hi, I had same problem with 4.0.2, 3.0 and 2.01. Using XP, SP3. Installing version 1.72 solved the problem and it works fine, A search engine "Digital Edition 1.72" will find you a link for it.

Browser Doesn't start in Windows 7

I just moved to Windows 7 and got JDev and all my connections working.
One problem remains, when I "run" a jsp from Jdev, it doesn't start my browser I have to copy and paste the URL into the browser and then it comes up?
Does anyone know how to fix this?
THanks,
Jet

ah, that was it! I upgraded to Windows 7 and copied over the whole JDev directory, figuring everything would work. Didn't realize that W7 uses a different directory name (i.e. C:\Program Files (x86)\Mozilla Firefox\firefox.exe). Adding in the (x86) caused the problem.
Thanks for all your help!
Jet

Windows 8.1 doesn't start Camera Window when Canon SX110IS is connected

When my Canon SX110IS is connected and turned on, Device Manager shows the camera as a connected Portable Device; and clicking Start/Control Panel/AutoPlay/Devices lists the Canon SX110IS and shows "Downloads Images from Canon Camera (Canon CameraWIndow)" as the action to take when camera is connected; however, when the camera is connected and turned on, Windows 8.1 doesn't start the CameraWindow program.

Solution: I thought that setting preferences using Windows 8.1 Control Panel / AutoPlay would make those actions happen. NOT SO! You MUST ALSO click to select "Use AutoPlay for all media and devices" at the top of the AutoPlay window. When you have your preferences set for your Media Card and your Canon Camera, AND have that also selected, the preferred actions you chose WILL take place when you either connect your camera to your computer via USB cable and turn the camera on, or insert your SD card in your computer.
In answer to why I connect via USB cable rather than inserting the SD card, it takes the same time for me to open the AV door and connect a USB cable between the camera and the computer as it does to open the battery door, remove the SD card, and insert it in the computer. So I guess it just depends on which mode you prefer to use.

Volume panel doesn't start at windows star

Hi!I just bought the X-fi extreme music and have a problem with the volume panel only starting up sometimes at windows startup. I have checked the "Load volume icon at startup" but sometimes it just doesn't work. hope somebody can help me because it's very annoying...Best regardsThomas

Its a problem with microsofts upnp were it fubars your?start up?icons if ?you show internet devices such as routers.
There is an easy fix if it is that though, go to control panel>network connections and right click and choose hide your pnp device, it will be a router (or other device) that looks like a telly.
If that doesnt work you could un-install upnp, but i would rather not tell you how to do that as your device might be dependant on it.
There is a link to an article on this i posted in another thread.

Firefox doesn't start in Windows 8 and none of your suggested solutions worked

I haven't been able to start the Firefox and I don't get any message on start-up. I tried all the suggested solutions from your support pages, but none work, as for most of them you need to have the browser open.
I uninstalled and re-installed the browser, but to no avail.

Hi,
1. Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
2. After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
3. Delete the Firefox installation folder, which is located in one of these locations, by default:
o Windows:
 C:\Program Files\Mozilla Firefox
 C:\Program Files (x86)\Mozilla Firefox
o Mac: Delete Firefox from the Applications folder.
o Linux: If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see Install Firefox on Linux. If you downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
4. Now, go ahead and reinstall Firefox:
1. Double-click the downloaded installation file and go through the steps of the installation wizard.
2. Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Regards
''''''Deepak Krishnan P.R''''''

Illustrator CC and CS6 doesn't start in Windows 8.1 Preview

When I attemp to run Illustrator on my machine running Windows 8.1 preview I see this error message (In spanish because both my system and software language are in spanish):
Error
Esta aplicación no es compatible con el idioma del sistema operativo actual. Abra el Panel de control "Opciones regionales y de idioma" en el menú Inicio de Windows.
This application is not compatible with the curren operating system language. Open Region and settings in Control panel on Windows Start menu.
I tried switching to Spanish (Spain), Spanish (United Stated), English (United States) and back to Spanish (Chile) with no results.

Are you running the Spanish version of Win 8.1, Conisus?
Have you tried resetting preferences (http://adobe.ly/Ty949V), disable any third party plug-ins and/or launch the software in a new user account with admin rights? http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html# main_Common_solutions
If the basic troubleshooting steps don't work, would you mind to gather a copy of the crash log, paste it into http://pastebin.com and share the url? You should be able to locate the log by launching the Event viewer and search for the application crash logs of Illustrator.exe. Thanks!

Financial Reporting Studio client doesn't start in Windows 7 64-bit

I have installed version (11.1.2.756) on my Windows 7 64 bit machine. When I try to start the application it will not start. I am getting the following message. Runtime Error 429 ActiveX component can not create object.
Thanks

Is the windows user/id is having sufficient administrative rights? Have you tried with Administrator id for windows login & then tried to open FR Studio?
If that does not help, try reinstalling FR Studio.
Regards,
Santy

Reports Builder doesn't start in Windows 2000

Hi all,
i've installed Oracle Developer Suite 10g on Windows 2000 Pro (SP4). Installation procedure ends succesfully, but when i try to launch Reports Builder the process rwbuilder hangs up.
Someone can help me?
Thanks. Matteo.

Hi Jon, thank you for your support.
I've stopped my scan virus, but the process rwbuilder still hangs up...and my path name doesn't contains any spaces!
Other ideas?
I've installed Developer Suite 10g and Enterprise Manager 10g in the same machine, but in different Oracle Home and the only Reports Builder doesn't work...the other applications (SqlPlus, Forms Builder etc..) works fine!
Regards, Matteo.

Installation doesn't start in Windows 7...

Hello:
I am trying to install Reader (and Flash) on a Windows 7 machine. The installer copies itself several times in the temp folder as if it was attempting to start the installer, but it never does. Same behavior happens with the Flash installer.
I have ran all sort of registry cleaners and cleared up all registry entries related with adobe. Started the computer without any anti-virus or other protection tool that could be killing the installer.
I give up, anyone with the same problem ?
Thanks,
Juan

Download the installer for Adobe Reader from http://get.adobe.com/reader/enterprise/ and save it to disk.
Download the installer(s) for Flash Player from http://forums.adobe.com/thread/889580 and save to disk.
Close all browser windows, then run the downloaded installers.

ADE doesn't start on windows 7,

Similar Messages

Maybe you are looking for