ADE hangs while trying to verify document

Help! I'm not sure why, but after adding some pdf files (some purchased, some free) to my library, I can't open ADE any more. It just displays a pop-up box saying "Verifying document..." and never comes back. I have no idea which document it's trying to verify. All I can do is close ADE. I can't access anything now. What do I do?

This environment is complex and many-layered, so the frustration you (and
I) feel can stem from several items.
You have to remember that the software's design point originated in the
mid-1990's. When the first version came out, PDF documents weren't at the
level they are right now, and ADE tells you in the HELP section what
features it doesn't support. However, the ORIGINATORS of the document can
put any number of 'features' in it - and that doesn't mean the software
will be able to recognize them. It's like the different versions of UNIX
and LINUX, etc. What ADE can recognize and deal with results in messages,
just as you and I think should happen. So, I'm thinking that the document
itself or the delivery system are corrupt in ways that cause software
issues.
It could be the 'messenger' software that's transferring the document to
ADE: if it's not working properly, all bets are off. Overdrive is one
chronic offender.
Next up - the publisher. I'd contact the publisher first and discuss your
issue with them. It's quite possible that you're not the only one having
the same problem, and he or she has some 'magic bullet'.
Finally, the distributor. If they are using Overdrive, then the bugs in
Overdrive could either cause or make worse the situation.
Hope this helps!
==============

Similar Messages

Application hangs while trying to create a socket

Hello,
We have a third party application that makes HTTP connections using a old version of HTTPClient. Recently we have run into problems where the application hangs as one thread seems to hang while trying to create a socket (thread dumps show the hang occurs in native code) and other threads end up waiting for this thread as they need to obtain a lock on HTTPClient.HTTPConnection. We found out that HTTPClient was not setting a timeout on the underlying socket (SO_TIMEOUT) and the relevant patch has been implemented in the hope that if the condition arises again the offending thread will be timed out and allow other threads to try and continue.
We will not be able to see if the patch works until Monday and I would like to understand the problem a little better if it fails. My question at what point will the socket timeout starting ticking? As our offending thread is waiting in native code is there a chance that the timeout will not be "active".
Also can anyone provide reasons for an application hanging while trying to create a socket and any suggestions for monitoring or mitigating this problem?
Thanks a lot.
Sun Solaris 5.8
JDK 1.4.1 b02

It looks like our version of the JDK offer a connect method with a timeout value, I think this will do the trick.

Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to server

We have Adobe Connect 8 (Multilanguage - Portuguese) installed on a server. Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to the server. Hayward Drummond has posted a notice about Adobe Connect 8.1.2 that seems to solve this problem, known as BUG 2886745. I sucessfuly downloaded this update but I´m not sure if it is compatible with Adobe Connect 8 Multilanguage - Portuguese. Does anyone know something about it? I also need to first install version 8.1.1 in order to upgrade to 8.1.2, as remarked by Hayward. Does anyone know where can I download version 8.1.1 (Multlanguage - Portuguese)?

try to install Firefox 8 on top of Firefox 7, or
Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
here explain how to backup profile
* https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
here explain how to restore it
* https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

Game room doesn't work, as it tries to save nickname and hangs while trying to save nickname info

Game room doesn't work, as it tries to save nickname and hangs while trying to save nickname info

From my understanding, trying to save apple server specific attributes on Active Directory users in the WGM will not work unless the AD schema has been extended to include these attributes.
What you can do in leopard server is to export the list of AD users in WGM and then import them into open directory in WGM.
From my testing the open directory will automatically authenticate with AD for those imported users. You can save Apple server attributes on those imported users.
Message was edited by: Kwong Kian Tew

While trying to open document getting error msg

Hi
While i am trying to open document thru cv03n it sending error messsage please help.
File c:\temp\_10097601.doc cannot be created
Message no. 26172

Hi,
IF the issue is user specific: Please check the access rights in C:\ folder.
If the issue is common: Check the RFC connection and ensure the test results are in green.
If the PROD system was working properly earlier and you face the issue suddenly: Check the port setting (Check with the server team-They may lock the port some times during upgrade/Maintenance).
If your issue not solved send the connections screen shots.
Rgds,
Nayeem.

Script getting hang while trying to execute update command in python using cx_oracle

Hi All,
My script is getting hang while executing below script and it is not throwing any error.
TEMP_PROD_cur=TEMP_PROD_schema_conn.cursor()
sql="update APP_DB_CONNECT set DRIVER=:driver,URL=:url where APPNAME=:appname and CONNECT_NAME=:connect_name"
TEMP_PROD_cur.execute(sql,{'driver':driver_name,'url':jdbc_url,'appname':app_name,'connect_name':connect_name})
TEMP_PROD_schema_conn.commit()
I tried several ways to prepare update statement to execute but the script is getting hang in all the ways.
Please help to resolve this issue.

There's not enough info provided to be able to tell what's going on. You can find online ways to troubleshoot Oracle lock issues - if this is what you are experiencing.

Explorer has Hanging while Trying to Run Forms 10g

Hi,
While Trying to Run Forms 10g on Windows vista (o.s) "Explorer has Hanging " ...
Operating system : Windows vista
Forms - 10g
Plz Any one help...
Thanks....
Sa....

Is it the problem with Vista only or in other versions of windows tooo. If the same problem occours in other IE versions then check if you have installed jinitiator.Most probably it is in case the jinitiator not installed...

ITunes 7 hangs while trying to update Library

I installed 1Tunes 7 onto my Jukebox Mac - contains 16,450+ tracks, 90Gb. iiTunes hangs when trying to update the library. I keep all my actual music files on an external LaCie D2 160Gb drive. Even if I move the drive to a different Mac, and attempt to update the Library there, it also hangs.
Has anybody got a suggestion?

Sorry to not be of any direct help, but I'm having the same problem and my situation is almost identical. iTunes 7 in general has been buggy for me and I'm wondering if it has to do with the fact that I have 100GB of music which is located on an external drive (not an uncommon set-up). I've tried the reinstall from the download of 7.02 as well as software update and have tried repairing permissions vs. not. I've also trashed the itunes plist files in my usr library.
And now I'm just reflecting on how practiaclly everytime I update something from apple I have to spend days trying to figure out how to fix it. I would consider myself a pro user as well which makes me wonder what the millions of novice mac users do to keep their systems running... oh yea, I almost forgot, for $350 for 2 years beyond the year you get for free (175/yr) apple's novice apple 'care' customer service staff will attempt to help you fix their faulty, seemingly untested (in a real world working situation) upgrades (or they'll just deny the fact that the problem exists and make any attempt to blame it on the fact that you probably just forgot to plug your machine in). Makes me wonder if the faulty upgrades and applecare have anything directly in common. Is Steve Jobs republican?
Sorry, years of dealing with apple products, just had to vent...
G5 Dual 2 GHz Mac OS X (10.4.8)

Jdev hangs while trying to create deployment profile for EJB from ADF BC.

Hi,
I created some ADF BC and try to create the deplyment profile as EJB session Beans
however it is not saving and while trying to deploy it to satandalone OCJ I got some errors
atht classes EJB are missing.
Please advise.
Thanks
JO

Hello JO,
Is the version of your stand alone OC4J compatibile with JDeveloper you are using?
e.g.: JDev 10.1.3 is certified with OC4J 10.1.3
Did you install the ADF runtime ?
e.g.: from the menu, Tools -> ADF runtime installer -> stand alone OC4J
What is the exact error which is displayed ?
Stephan

Firefox keeps hanging while trying to load facebook

I have been using firefox on my laptop for over a year now and haven't had a problem until the other day. I have been reading through multipul articles trying to fix my problem but yet nothing has helped. It started the other day when all of a sudden firefox just crashed and closed. When re-launching it it would just freeze. After playing around with it I ended up just uninstaling it and then re-downloading it which seamed to fix the problem then. It worked fine until today. Out of nowhere when I would open firefox it would just freeze. Ive now narrowed it down to just freezing while trying to load my news feed on facebook. I have created a new profile, disabled all un-needed pluggins and addons and tweeked with firefox's settings to try and fix this but nothing has helped. ):
also just as I was trying to recieve the troubleshooting information it froze aswell.

Can someone please help? Haha, I'm sure there's a simple explanation to this.

Excel 2013 hangs while trying to open a file from network share

Hi,
I am having issue opening excel file from a network share. it happens randomly, the file opens and hangs abruptly. Nothing happens after that ( we can only move the cursor), if we click on the excel sheet we get a beep sound. after i kill the excel process
and open it again ,it works fine.
Where did the member use the Excel file? Local disk, SharePoint, File server, or network shared disk?
       Network shared file and sometime locally
Does the issue occur in the special file or every file?
      it happens randomly and the whole excel freezes. i have to kill the excel session.
Which Office version is the file created? Excel 2013 or early? If it is XLS format, please try to convert to XLSX to test.
   Network file server has office 2010 and the user is trying to open it in excel 2013
Does the file have some macros?
Yes, they have macros in some files
Does the issue occur recently? If it is, have you installed some programs or update before you encountered it?
       it happened before too.
Do you get some error message when Excel crashed?
Yeah. Attaching the error message from event viewer. We get file corrupt errors and below too.
Please suggest

Hi Suren424,
Since your first image showed that "To see if more information about the problem is available, check the problem history in the Action Center control panel." Please go to this path (Control Panel\All Control Panel Items\Action Center\Problem Reports)
to check the detailed information, and you might upload the screenshot or info here.
Then, please try the following methods and check if they are helpful:
1. File --> Options --> Advanced --> uncheck "Ignore other applications that use Dynamic Data Exchange (DDE)"
2. Turn off "Protected View" --> (File –-> Options –-> Trust Center --> Protected View --> Uncheck all options
3. I notice that >>Network file server has office 2010 and the user is trying to open it in excel 2013 <<, it also might be caused by the Microsoft Office File Validation for Office 2010, please try to change setting in server with
the link:
http://support.microsoft.com/kb/2501584
If you have any update , please feel free let us know.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Log in Screen hangs while trying to install upgrade download of elements 13

I downloaded the update of Premier elements 13, tried to run the install. I first get a message that says my machine needs to be restarted and I'm given the option to quit or ignore. I restarted multiple times and still get that message. I click ignore and the initialization process starts and everything looks fine. I get the Sign in required, click sign in, put in my username and password then thats where it hangs. Little boxes just go round and round and no connection. And.. yes, I do have a connection Thanks for your help!
I have windows 7. See the below screen shots. Thanks!

janmendoza
Premiere Elements 13 on Windows 7 64 bit.
From where are you downloading Premiere Elements 13 (as purchased or tryout)?
Please give the following a look with regard to what worked for me with version 12.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome. If none of the above resolves the matter, we might look at download
of Premiere Elements 13 from another source. More on that later.
ATR

IStudio hanging while trying to open a project

Hi,
iStudio throws application( DB adapetr) error at the startup, when OK is
clicked on the messages, it hangs showing the status as "Loading deploy view".
Actually iStudio got closed during creating an event in B2BApp (DB
adapter).When opened for the next time it gave above error.
nothing worked with stopping & starting the adapeters & repository.
Messageinfoidtable has following error entry in description column:
"AQ Adapter: ** Error ** unable to restart database and AQ connections."
& "XMLAQAdapter_restartFailed" entry in internalID.
Starting of AQ Adapater is throwing following error:
AQ Adapter: restarting database and AQ connections.
AQ Adapter: resubscribing to queue IP_IN_QUEUE.
AQ Adapter: ** Error ** unable to restart database and AQ connections.
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:124)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at
oracle.jdbc.driver.T4CTTIoauthenticate.receiveOsesskey(T4CTTIoauthent
icate.java:242)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:297)
at
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
346)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:543)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at
oracle.oai.common.database.DBConnection.connectToDatabase(DBConnectio
n.java:482)
at
oracle.oai.common.database.DBConnection.connectOnce(DBConnection.java
:314)
at
oracle.oai.agent.common.oracleaq.AQSessionFactory.getAQSession(AQSess
ionFactory.java:47)
at
oracle.oai.agent.common.oracleaq.AQManager.createAQSession(AQManager.
java:482)
at
oracle.oai.agent.common.oracleaq.AQManager.subscribeQueue(AQManager.j
ava:421)
at
oracle.oai.agent.common.oracleaq.AQManager.resubscribe(AQManager.java
:407)
at
oracle.oai.agent.common.oracleaq.AQManager.restart(AQManager.java:210
at oracle.oai.agent.common.Restarter.doOperation(Restarter.java:42)
at oracle.oai.agent.common.TimerThread.run(TimerThread.java:74)
Adapetr entries are as follows:
// Bridge class
bridge_class=oracle.oai.agent.adapter.aq.XMLAQBridge
// AQ database connection info
aq_bridge_username=xxxx // aq_bridge_username=b2buser
//the value of the property "aq_bridge_password" is taken from the
Wallet.
aq_bridge_host=oradisc
aq_bridge_port=1521
aq_bridge_instance=aaa
aq_bridge_owner=aaa
aq_bridge_consumer_name=B2BUSER
aq_bridge_use_thin_jdbc=true
Is there any link between the starting up of iStudio n AQ adaapter?
If password needs to be changed then where can I do the changes, as password is stored in wallet, how to search the wallet utlility?

Hi Colette,
Thnx for the reply.
Yes u r right, the whole intergration consists of AQ, DB & FTP adapter applications, connecting with B2B.
Infact B2BUser entry is commented here.
The inital error coming is error loading in DB application( in which I was creating some event)....then iStudio hangs showing loading deploy view.
I tried with changing the entries suggested, still facing same issue.
Is my metadata corrupted due to some wrong/incomplete event creation?
Can I delete the entries from the messageinfoidtable for the event I was trying to create?
How to check the password entries from wallet..I mean what all steps involved to check the same.
Below is the ini file entiries for the AQ adapter:
// Bridge class
bridge_class=oracle.oai.agent.adapter.aq.XMLAQBridge
// AQ database connection info
aq_bridge_username=ichub // aq_bridge_username=b2buser
//the value of the property "aq_bridge_password" is taken from the Wallet.
aq_bridge_host=oradisc
aq_bridge_port=1521
aq_bridge_instance=b2b
aq_bridge_owner=b2b
aq_bridge_consumer_name=B2BUSER
aq_bridge_use_thin_jdbc=true
+++++++++++++++++++++++++++
+++++++++++++++++++++++++++
Below is the iStudiolog.txt entries: any pointers from below file?
10:47 AM 9/29/200510:47 AM 9/29/2005LOW: 20
HIGH: 40
MAX: 120
DEBUG: true
ADT Support: true
Connecting to repository
RepoConnection: Got IOR!
Bound to EventMgr
Bound to EMDMgr
Bound to AgentATMgr
Bound to LCOMgr
Bound to DSOMgr
Bound to RepoMgr
SessionName:iStudio@sgistudio
COMMIT SESSION CALLED.
ENDSESSION CALLED.
CACHE compaction algorithm running...
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
CACHE SIZE: 0
END CACHE compaction algorithm.
END SESSION CALLED BY COMMIT SESSION.
CACHE SIZE: 1
CACHE SIZE: 2
CACHE SIZE: 3
CACHE SIZE: 4
CACHE SIZE: 5
CACHE SIZE: 6
CACHE SIZE: 7
CACHE SIZE: 8
CACHE SIZE: 9
CACHE SIZE: 10
CACHE SIZE: 11
CACHE SIZE: 12
CACHE SIZE: 13
CACHE SIZE: 14
CACHE SIZE: 15
CACHE SIZE: 16
CACHE SIZE: 17
CACHE SIZE: 1
CACHE SIZE: 2
CACHE SIZE: 3
CACHE SIZE: 1
Event Map does not exist
CACHE SIZE: 1
CACHE SIZE: 2
Event Map does not exist
CACHE SIZE: 2
CACHE SIZE: 3
Event Map does not exist
CACHE SIZE: 3
CACHE SIZE: 4
Event Map does not exist
CACHE SIZE: 4
CACHE SIZE: 5
Event Map does not exist
CACHE SIZE: 5
CACHE SIZE: 6
Event Map does not exist
CACHE SIZE: 6
CACHE SIZE: 7
Event Map does not exist
CACHE SIZE: 7
CACHE SIZE: 8
Event Map does not exist
CACHE SIZE: 8
CACHE SIZE: 9
Event Map does not exist
CACHE SIZE: 9
CACHE SIZE: 10
Event Map does not exist
CACHE SIZE: 10
CACHE SIZE: 11
Event Map does not exist
CACHE SIZE: 11
+++++++++++++++++++++++++++++++++++++++++++++
Any pointers how to check the password entries in the wallet?

Dreamweaver CS4 hangs while trying to insert Spry Tooltip widget

I tried it several times - through Insert panel, and Insert - Spry... menu in Dreamweaver. It hangs deadly right after insert operation.
So i had to make it manually, inserting the code and attaching CSS+JS files.
I've already made an official request to Adobe (and just in case - i'm using XP SP2).
Any ideas?

As i discover it now, an attempt to insert ANY Spry widget leads to hanging the Dreamwever. Something went wrong with it.
How can i fix this?

QtCreator hangs while trying to add files to a project

Hi everyone.
When I'm trying to add existing files to my current project (or even create new project) a file manager window appears to choose a file/folder. No matter what I do (ok, cancel, etc) this window won't close, and it also hangs the whole qtcreator.
What's wrong with it?
qtcreator 3.3.0-1
DE - cinnamon 2.4.6-1
Thanks in advance.
Last edited by mkdy (2015-01-28 19:03:32)

Downgraded following packages to older versions:
qt5-base-5.3.2-2-x86_64.pkg.tar.xz
qt5-declarative-5.3.2-2-x86_64.pkg.tar.xz
qt5-quick1-5.3.2-2-x86_64.pkg.tar.xz
qt5-quickcontrols-5.3.2-2-x86_64.pkg.tar.xz
qt5-script-5.3.2-2-x86_64.pkg.tar.xz
qt5-sensors-5.3.2-2-x86_64.pkg.tar.xz
qt5-tools-5.3.2-2-x86_64.pkg.tar.xz
qt5-translations-5.3.2-2-x86_64.pkg.tar.xz
qt5-webkit-5.3.2-2-x86_64.pkg.tar.xz
qtcreator-3.2.2-1-x86_64.pkg.tar.xz
Works fine now.

ADE hangs while trying to verify document

Similar Messages

Maybe you are looking for