ADE not authorizing

I am unable to authorize my Windows 7 laptop with ADE. I have version 2.0.1, which I installed earlier today. My adobe Id is working since I have also reset my password today. However when I clieck authoze after entering my credentials, i receive the error "the vendor account you entered is not associated with the item you are trying to open. try again"
does anyone have a suggestion on how to resolve this? thx

That message usually comes when you try to access a book, not when you authorize.
What exactly do you mean by when I clieck authoze after entering my credentials.
Basically entering your credentials is authorizing.
Without more detail impossible to be sure, but two things that often help ....
Two possible solutions ...
1) ~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
2) ~~~~~~~~~
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

Similar Messages

My laptop and kobo ereader have both been authorized with ADE yet I can't open ebooks in my ereader. A message pops up saying that my ereader is not authorized. What can I do?

My laptop and kobo ereader have both been authorized with ADE yet I can't open ebooks in my ereader. A message pops up saying that my ereader is not authorized. What can I do?

My laptop and kobo ereader have both been authorized with ADE yet I can't open ebooks in my ereader. A message pops up saying that my ereader is not authorized. What can I do?

Why is Nook Study saying my ADE epub is "not authorized?"

I have an EPUB file that I purchased from a vendor other than Barnes & Noble.
I used Adobe Digital Editions to manage the EPUB book onto my Nook Color, which is authorized to open my ADE library.
I can use ADE to read the EPUB book on my laptop, which also is authorized to open my ADE library.
However, I cannot use the Nook Study application to read the EPUB book on my laptop. The error I am getting says, "This textbook is not authorized to be read on this computer."
Any ideas what the problem is here? I'd be happy to "authorize" the Nook Study installation, if I need to, but I don't know how to authorize an application that is running on an alread-authorized device...

iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Device not authorized - Kobo

I authorized my Kobo in ADE and can transfer the book to my kobo but when I try to open the book, it tells me my device is not authorized so I can't open it. I tried reseting to factory settings and set it up on someone else's account and it works. I reseted to factory settings and tried again and I always get the same error message. For some reason, even when ADE confirms the device has been authorized it doesn't work. Whit all the tests I did, I know the issue is with my ADE account and not my device. Can anyone help?

Did your KOBO also authorized with the same Adobe ID? If not, please authorize KOBO with the same Adobe ID and try opening the book.

My iPhone wont let me download some apps that i have payed for on on my account; it says my iPhone is not authorized for this computer, but it is.

My iPhone wont let me download some apps that i have payed for on on my account; it says my iPhone is not authorized for this computer, but it is.

No, iTunes never says an iPhone is not authorized.
This is occurring on a computer, correct?
Is the computer authorized for the account the media or apps were acquired with?

Unable to use Datasource.cfc in Admin API - The current user is not authorized to invoke this method

Hi Everyone,
I am having some issues accessing the methods in the datasource.cfc in the adminAPI.
I can successfully load the administrator CFC and am told that I have successsfuly logged in;
But when I try to subsequently load the datasource.cfc I get an error that the current user is unable to access the method.
/* Create an Admin API object and call the login method */
                                                  var local = {};
                                                  local.adminObj = createObject("component", "cfide.adminapi.administrator");
                                                  /* Enter your password for the CF Admin */
/* if you dump this - TRUE is returned */
                                                  local.adminObj.login(adminPassword="my_admin_user_password");
                                                  /* Create an object of datasource component */
                                                  local.dsnObj = createObject("component", "cfide.adminapi.datasource");
writeDump(local.dsnObj.getDataSources());
I tried creating separate admin users and passwords - yhinking that perhaps a revent hotfix had stopped the "admin" user from being allowed to use the adminAPI - but changing to a new adminuser yielded the same results.
I could login to the admin API with the new username and passsword - but could not access the datasource.cfc after that.
Here is the debug output from the error...
The current user is not authorized to invoke this method.
The error occurred in accessmanager.cfc: line 48
Called from datasource.cfc: line 52
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 155
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 52
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 45
Called from C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: line 1
-1 : Unable to display error's location in a CFML template.
Resources:
Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.31 (KHTML, like Gecko) Chrome/26.0.1410.64 Safari/537.31
Remote Address
127.0.0.1
Referrer
Date/Time
22-Apr-13 01:09 PM
Stack Trace
at cfaccessmanager2ecfc974154242$funcCHECKADMINROLES.runFunction(E:/cf10_final/cfusion/wwwro ot/CFIDE/adminapi/accessmanager.cfc:48) at cfdatasource2ecfc1679861966$funcGETDATASOURCES.runFunction(E:/cf10_final/cfusion/wwwroot/ CFIDE/adminapi/datasource.cfc:52) at cfApplication2ecfc498167235$funcPREREQUISITESTART.runFunction(C:/inetpub/wwwroot/projectD ir/trunk/Application.cfc:155) at cfApplication2ecfc498167235$funcINIT.runFunction(C:/inetpub/wwwroot/projectDir/trunk/Appl ication.cfc:52) at cfApplication2ecfc498167235._factor5(C:/inetpub/wwwroot/projectDir/trunk/Application.cfc: 45) at cfApplication2ecfc498167235.runPage(C:/inetpub/wwwroot/projectDir/trunk/Application.cfc:1 )
coldfusion.runtime.CustomException: The current user is not authorized to invoke this method. at coldfusion.tagext.lang.ThrowTag.doStartTag(ThrowTag.java:142) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2799) at cfaccessmanager2ecfc974154242$funcCHECKADMINROLES.runFunction(E:\cf10_final\cfusion\wwwroot\CFIDE\adminapi\accessmanager.cfc:48) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:655) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:444) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:414) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2432) at cfdatasource2ecfc1679861966$funcGETDATASOURCES.runFunction(E:\cf10_final\cfusion\wwwroot\CFIDE\adminapi\datasource.cfc:52) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:405) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:655) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:444) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:414) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2432) at cfApplication2ecfc498167235$funcPREREQUISITESTART.runFunction(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:155) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:405) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2659) at cfApplication2ecfc498167235$funcINIT.runFunction(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:52) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:220) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2659) at cfApplication2ecfc498167235._factor5(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:45) at cfApplication2ecfc498167235.runPage(C:\inetpub\wwwroot\projectDir\trunk\Application.cfc:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:244) at coldfusion.runtime.TemplateProxyFactory.resolveComponentHelper(TemplateProxyFactory.java:538) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:234) at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:159) at coldfusion.runtime.TemplateProxyFactory.resolveFile(TemplateProxyFactory.java:120) at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:138) at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:84) at coldfusion.runtime.AppEventInvoker.<init>(AppEventInvoker.java:64) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:232) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:112) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:219) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:204) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662)
And here is the listed exceptions, beneath the stack trace;
13:09:56.056 - cfadminapiSecurityError Exception - in E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc : line 48
         The current user is not authorized to invoke this method.
13:09:56.056 - cfadminapiSecurityError Exception - in E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc : line 48
         The current user is not authorized to invoke this method.
13:09:56.056 - java.io.FileNotFoundException - in C:/ColdFusion10/cfusion/wwwroot/WEB-INF/exception/errorcontext.cfm : line 44
         E:/cf10_final/cfusion/wwwroot/CFIDE/adminapi/accessmanager.cfc (The system cannot find the path specified)
This perspn seems to be having the same issue;
http://forums.adobe.com/message/5051892
and I agree I don't have "E" drive either!

I've found a solution to my plight - I don't know if it'll work for you or help you try something that MAY fix it.
I use a common code set which includes the Application.cfc from a CF Mapping - So, in the application.cfc in the actual website I do this:-
<cfinclude template="/UberDirectory/Application.cfc">
Then, in the /UberDirectory/Application.cfc, I was initialising a CFC which checks if the datasource was created for the website. The datasource checking code attempts to log into the Admin API and check & create if necessary the datasource.
This has previously worked without fail for me - But in this instance it failed!! I was doing two things wrong - Firstly, the CFC should only be called in the Application.cfc in the onRequestStart section as the Application had to be initialised first - This is maybe because I've invoked the application.cfc in a "non-standard" manner.
Secondly, once I'd moved the CFC invocation into oNRequestStart I saw the following error:-
The string COOKIE.CFAUTHORIZATION_uber-directory is not a valid ColdFusion variable name.
I had this as the app name .... <cfset this.name = 'uber-directory'>
Changedthe dash to an underscore and I was away and could once again check the datasources
Hope it helps
Martin

Not Authorized to write to this folder - error msg.

I have been trying to install updates for my Canon Dig Camera software [Applications/Canon Utilities - Canon Utilities is the folder I created during the initial install], it appears to go fine for the first few updates (image browser, Camera Window) and then suddenly stops and throws the error 'Not Authorized to Write to this Folder' and quits. Any suggestions?
Folder Permissions:
Ownership: you can R&W
Owner: system (locked)
Access: R & W
Group: Admin
Access: R&W
Others: Read Only
Thanks in advance for any help!

Run utility disk and repair permission.
p.s.
are you computer admin?

[SOLVED]Mounting usb drives "not authorized" with thunar-volman (XFCE)

Hi,
I'm new to Arch (even though I must be approximately at my 15th try at installing it properly) and I have a problem with thunar-volman.
Whenever I log in as user, and try to mount a usb drive with thunar, let's say I want to plug a drive labeled Ext3_8Go, I get the same message in a pop-up window : "Failed to mount Ext3_8Go (or anything close, not in English in the text), not authorized (that part is in English)"
My install is :
- net install
- partitions : 9Go for /, no swap, no separate /home
- packages : base and base-devel. The only modifications in the package list is that I remove ppp, pcmciautils, and xfsprogs.
- config : at the install stage I only modify rc.conf to change LOCALE and HOSTNAME, and pacman's mirrorlist to allow all French mirrors in addition to the one at the top.
When the usb installation is over, I run this script :
"installation_xfce.sh" (there may be some errors left, I modify this script as I learn) :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon
sed '/^# exec/c\' </etc/skel/.xinitrc >/tmp/.xinitrc
sed '/^# .../c\' </tmp/.xinitrc >/home/$var_username/.xinitrc
cat >> /home/$var_username/.xinitrc << EOF
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
I can mount as a user, no password asked, with :
udisks --mount /dev/sdb2
but the GUI method tells me "not authorized".
"groups user" outputs :
lp wheel games network video audio optical storage power users
the command "ck-list-sessions" outputs :
Session2:
unix-user = '1000'
realname = ''
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0.0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.716103Z'
login-session-id = '1'
Session1:
unix-user = '1000'
realname = ''
seat = 'Seat2'
session-type = ''
active = FALSE
x11-display = ':0.0'
x11-display-device = ''
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.573029Z'
login-session-id = '1'
For those who don't have time to read the installation script, DBUS is in the DAEMONS list of rc.conf, and .xinitrc launches : exec ck-launch-session startxfce4
Any idea ?
Last edited by choubbi (2011-08-15 15:05:04)

Thanks a lot !
That worked !
I stumbled across this part of the wiki several times before, but didn't really understand so I had not tried.
If anyone's interested in the script, here's the corrected version :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon (note that the part with 'if [ -d /etc/X11/xinit/xinitrc.d ]" is not present, to avoid mounting problems when logged as regular user)
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
The important part of the script to solve the problem is :
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc

I have just purchased a new pc and when I try to play 2 separate albums that I bought from the itunes store I get a message that my computer is not authorized. I then follow the steps to authorize it and the same thing happens when I attempt to play this

Just purchased a new pc with windows 8. Transferred over my itunes. With 2 different albums in my library, when I attempt to play this music I get a message saying my computer is not authorized. I then sign in to authorize the computer, itunes tells me it is indeed authorized, I attempt to play this music again and I get the same "your computer is not authorized" message again, and again....
Any help out there on this one would be appreciated. If my question is not clear enough I will attempt to help.
Thank you,
mike

Delete and redownload them if doing so is free in your country.
(106637)

FR Studio 11.1.1.3 : You're not authorized to use this function...

Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle     Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle     Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle     java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
     ... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory     Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory     5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
     at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
     at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
     at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
•     02. installer - V17382-01.zip
•     03. foundation 1 of 4 - V17397-01.zip
•     03. foundation 2 of 4 - V17369-01.zip
•     04. architect - V17398-01.zip
•     08. financial reporting - V17378-01.zip
•     11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJK

Denis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks

Cannot sync my apps to my iPhone, says I am not authorized even thought i have authorized.

I am able to sync everything except for my applications. An error comes up saying I am not authorized on this computer but I have deauthorized and authorized again.

I have same problem, apps are removed everytime I sync my phone because am in a loop of messages claiming that I have authorized more than 5 computers with Itunes stuff (not true, computer has had upgrades to operating system, that's all); This is highly annoying. Because I don't know what would happen if I deauthorize my computer (does everything Apple/Itunes disappear?) I don't have the courage to deauthorize the computer and furthermore, I don't know if that would solve the problem.
Still looking for a solution to this problem. HOping I can find an answer somewhere.

My macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. how do i fix this?

my macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. can anybody tell me how i could fix this? iv already tried unarthorising the computer and re authorising it but it still doesnt seem to work

Hey CarlyR_,
Thanks for the question. I understand you are experiencing issues related to iTunes Store authorization. The following resources may help to resolve these issues:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

I just downloaded I tunes on my new computer, I've had an apple I'd since the iPod mini came out, I signed in and went to download purchases from my iPhone. It downloads apps fine but when I click on a song it says "your computer is not authorized" ***??

I just downloaded I tunes on my new computer, I've had an apple I'd since the iPod mini came out, I signed in and went to download purchases from my iPhone. It downloads apps fine but when I click on a song it says "your computer is not authorized" ***??

Authorize the coumputer. Go to store in the top of the screen and authorize it.

I tried to put a rented movie on my ipod touch and it kI tried to put a rented movie on my ipod touch and it keeps telling me that my computer is noteeps telling me that my computer is not authorized. But it is. I have other rentals on it. Why this movie?

I tried to put a rented movie on my ipod touch and it keeps saying that it can't be done because my computer is not authorized. However I have other rented movies on it.

Try deauthorizing and reauthorizing the computer.
iTunes Store: About authorization and deauthorization

I am unable to play a number of songs on my ipod...it says that this computer is not authorized...I tried to authorize it...but it wont work...

I am unable to play a number of songs in my music library on the computer...I keep getting the message that this computer is not authorized...I have authorized this computer...I get a message saying that we have 3 of 5 available computers that are authorized...what should I try now?

Have a look here http://support.apple.com/kb/TS1389

ADE not authorizing

Similar Messages

Maybe you are looking for