ADE not start after attempt to open application

Hi, hope someone can help me with this issue, I try to open ADE application and every time just get a white blank screen even though I had reinstalled it again. Its works 2 wks ago.

thank you all.
since posting i have looked through a number of threads on the site and got some idea of how the fsb should be setup.
to cure my own problem i ran chkdsk via WXP Pro repair and that allowed me to open windows again.
went into bios and upped the fsb to 166mhz and set the multiplier @ 11.5 (i am running an athlon xp 2600+)
the system had previously been set @ 100mhz x 11.5 i seem to have increased the speed of my PC by about 70%
if not for this problem and the research to put it right i would never have known anything was wrong!
thanks for your tips on CoreCenter - will use for monitoring temperature only from now on

Similar Messages

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

The browser can not start after running

I am working on jdeve10.2, because I deinstall the mozilla on my workstation, now I dont have bowser to start after I run the application, I can only paste the url on a new open IE. how can I fix it?
thanks

Go into tools->preferences->Web browser and proxy and set the path to your browser.
And please use JDeveloper 10.1.3 and not the old JDeveloper 10.1.2 - you are missing hundreds of new features.

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Windows 8.1 desktop PC not starting after hibernation

Hi,
I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
and such but this new one is hard to figure out without a desciption.
First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
white text on blue background), I got to a black page with grayish text telling me the following:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc [...]
2. Choose your language [...]
3. Click "Repair your computer."
File: \Windows\system32\winload.exe
Status: 0xc000000f
Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
Errors:
1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
Sorry if this post is a bit of messed up, that's about how I feel right now... :)
Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
Many thanks in advance.

Hi,
According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
For Windows boot process knowledge, you can refer to the contents of the link below for more details:
http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
Roger Lu
TechNet Community Support

PC Suite 6.86.9.3 does not start after reboot

Hi!
I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
Does any one have an idea how to solve my problem?
Thanks
Michael

Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

Workflow notification mailer not starting after APPS pwd change

Workflow notification mailer not starting after APPS pwd change
The error in the WFMAILER log is
[appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
wferr:
- WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
Can you please advice ?
EBS 11.5.10.2
DB 11.2.0.1

There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
[Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
Please see these docs.
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
Thanks,
Hussein

EXE DOES NOT START AFTER DOWNLOADING

I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607

Windows could not start after SP-3 update

Windows could not start after SP-3 update
After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I used the power button to shut down Windows & then booted into Mac OS X normally.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
Thanks for any help.

Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
Message was edited by: growler62000

CS6 now not supported after i updated the applications.

CS6 is now not working after i updated the applications. They were working minutes before i decided to update. i keep getting this pop up when im trying to open one of the applications
is there anyone that could help me resolve this problem?

Run the Creative Cloud Cleaner Tool, reinstall from scratch.
Mylenium

FP Install Will Not Start after DLM Install

The FP installation will not start after an apparent DLM installation. The DLM appears to install and the control panel shows it is present, but the FP installation will not start. There are no other messages that appear. A restart and reinstallation attempt installs the DLM again, but still no FP install. Using XP SP3 and IE 8.0.
Thx

Hi mont1228,
The Adobe Download Manager (DLM) executes the Flash installer in "silent mode" so you shouldn't see a dialog box. To confirm that Flash was installed successfully, go to http://www.adobe.com/software/flash/about/ and let me know if the animation doesn't appear.
Best regards,
Chris
clechner//adobe

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.

''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

ADE not start after attempt to open application

Similar Messages

Maybe you are looking for