ADE on Window 7 & Acer A500

I want to transfer a book from ADE on my desktop to LimiRead on my A500. ADE does not recognise my A500 when I plug it in.

Let's start with a couple of 'assumptions' - which is dangerous, but
probably necessary at this point.
First I assume that you have registered your A500 with the Acer website. If
you have not, then it's not considered a valid device by ADE and ADE won't
acknowledge that it's there IF you've followed the normal steps to get the
A500 attached and recognized by Windows.
Which brings me to the second assumption. If you have registered the A500,
you should have used your Adobe ID and password which will make it very easy
for ADE to interface with the device.
Now for the third assumption. You've mentioned that a KOBO ereader works,
so I assume that you know how to attach an ereader: plug in the ereader to a
USB port, let Windows recognize the hardware and then tell you it's ready to
use, then start ADE.
If you've done all that and the A500 doesn't appear, stop ADE. Then, on the
A500, start LumiRead. Now start ADE again. Did that make a difference?
=============

Similar Messages

ADE 2.0 stopped working (won't download library books to ADE on Windows computer for Kobo

I've used ADE to download e-books from my public library onto my Kobo for over a year now but for a week now I haven't been able to. When I open the library book, select 'download' and it opens ADE but it is a totally blank page (there should be several books there that I have purchased). It sits on this blank screen for a while and eventually an error message comes up "ADE 2.0 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solutions is available".
I pinged my local library who suggested that I uninstall ADE and reinstall it. I did that and nothing changed. I waited 24 hrs and tried again. Still no change. I've also removed my computer authorization (ADE-Help-Contr Shift d) and reauthorized. Still can't load a book.
Any suggestions???

There are lots of bugs in ADE2.0 (and 2.0.1).
Some of them just appear like that for no obvious reason on previously working systems.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

Reading e-pub with ADE on Windows 7

I download books through iTunes for my e-reader, but also like to read on my desktop (Windows 7). I find that some titles open in ADE but others do not (although are recognising the book, and identifying title and number of pages. Why is this? Am I doing something wrong, or are some books protected from being read otherwise than on an e-reader.(I use an iPad mini as my e-reader).

What program are you using on the mini?
If it is an Adobe DRM compatible program such as Bluefire and you can read a book there, you should be able to read it on ADE authorized with the same ID.

Can i use my iphone to tether to my acer a500

Through work, i need to use a flash interactive website, so i have purchased an acer Iconia A500 tablet, and need to use my iphone to tether to it fir web access!
has anyone done this?
and if so, how did u do it!
thanks in advance,
J

Yes.
You need to have the appropriate plan from your carrier.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

ADE and Windows 8.1

We are using Windows 8.1. When we start an eBook it will be opened, however, its characters are looking pixelated. How could we fix this? Is there any new (beta) version without this troubles?! Please let me know.

Updated to 4.0
Wish there was some notice about this, or an option to scan for updates to the program.
I will retract my above statement, for now, and see how 4.0.9* goes.

SAMSUNG NOOK 10.1 - NOT Recognized by ADE on Windows 7 computer

Does anyone know how to get a book that you have used ADE to open on computer to work on the new Samsung 10.1 NOOK? The NOOK Refuses to recognize my adobe ID and password, and the ADOBE support keeps telling me to go to Samsung, which doesn't do anything they can't help either.

Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

Tether BB Curve 8530 to Android powered Acer A500 Tablet

Is it posible? I have WiFi and Bluetooth and both devices.

Hi bmwsyc,
The Blackberry Curve is not Mobile Hotspot capable. Which means the Curve can not provide you a Wi-Fi connection, only a tethered connection via USB. Here is a list of our current Mobile Hotspot capable devices. Hopefully this information is helpful. Please let me know if you require further assistance.
Thank you for you contribution to our community forums,

Plans for Ubuntu version of ADE?

Does Adobe have plans to port their Digital Editions software to Ubuntu?
This support for Ubuntu would be essential for those who own ebooks. Ubuntu users are currently unable to read their ebooks that are only compatible with ADE (i.e. to read Google Play ebooks offline).
I wish that ADE becomes available to all popular desktop platforms (i.e. Windows, iOS and Linux) so that everyone can read their DRM protected ebooks.
Hat Adobe irgendwelche Pläne, Digital Editions nach Ubuntu zu migrieren?
Diese Unterstützung für Ubuntu wäre sehr wichtig für die, die Ebooks haben. Ubuntu Benutzer können derzeit keine Ebooks lesen, die nur mit ADE kompatibel sind (z.B. Google Play Ebooks offline lesen).
Ich wünsche, dass ADE für alle populäre Desktop Plattformen zur Verfügung steht (z.B. Windows, iOS, und Linux) damit jeder deren Ebooks mit DRM lesen kann.
Schönen Tag noch.

Thank you for your quick reply!
I then read this tutorial for setting up ADE in Wine:
http://robert.penz.name/440/howto-install-adobe-digital-editions-on-ubuntu-12-04-and-use-i t-with-an-e-book-reader/
I don't have an e-reader, but double clicking on the ascm file opened it in ADE under Wine. Then it downloaded a protected PDF in my home directory for offline use. ADE for Windows ran surprisingly fast on Ubuntu 12.10, and it opened up all the notes/bookmarks and pages. I haven't found a problem with it yet other than trying to open the ascm file from within the ADE interface.
Thanks again.

Can't register (or see) a KOBO in ADE using Ubuntu

Greetings and thanks in advance for any help. I am running ADE through Wine in Ubuntu, and ADE works fine on my PC. I have downloaded a DRM book that I bought and can see that fine on the PC. When I connect my KOBO, however, the KOBO is not recognised or identified in any way as a library or bookshelf. I used the Adobe tech support chat line and they helpfully suggested that I use the installation assistant, which is not activated for some reason, and when that didn't work, they referred me to the forums. Hmmmm.
I have already tried deleting the contents of .adobe-digital-editions as is suggested in the Nook posts wthout success (there was only one file in that folder anyway). And I have successfully copied files from my PC to the KOBO for reading by merely copying the files over directly, though this isn't possible for DRM books which require the use of ADE.
Anyway, I could re-install ADE in windows (my machine is dual boot), or it could be some kind of compatibility problem with my KOBO. The KOBO was automatically registered with Whitcoull's site when it was first connected (the bookseller in these parts). I am not really sure where the problem is: Ubuntu relying on Wine, with the ADE install, some form of required connection to the seller of the KOBO's website, or a compatibility problem between ADE and KOBO. With that range of potential problems, does someone have any ideas where to start?

There are quite a few people who are having this problem, me being one of them. I tried to email Apple tech support about it earlier today and I received a "try again later, circuits are busy" answer.
I haven't had a problem downloading either, but it is annoying to get the "register your ipod" screen every time that you connect to your computer. I'm surprised that Apple hasn't done anything about this yet.
Keep me posted if you finally figure it out.

Como asociar ADE 2.0 a .acsm?

Estaba trabajando bien con ADE 1.7, pero he descargado ADE 2.0 y no puedo asociarlo con archivos .acsm porque no aparece en la lista de programas de Windows 7 Ult (ni tampoco el ADE 1.7).
No me he atrevido a tocar el registro y no encuentro solución.
¿Alguien puede echarme una mano?
Rafa

. . A veces la inscripción de ADE para Windows como el lanzador por defecto para los archivos epub ACSM y no funciona ;
eso es lo que hace que el doble clic en el Explorador de fracasar , y por lo general impide la apertura desde el navegador también.
especialmente en los de Windows 8/8.1 , y tal vez 7 ;
esto parece ser un error de Windows (por una vez no es un error en ADE ) .
Dos maneras posibles a su alrededor.
En primer lugar, tratar de forzar en el Explorador
Haga clic derecho en un archivo epub . ( Y repetir la secuencia entera de . Acsm si es necesario)
Seleccione 'Abrir con ' si en la lista, "abierto" en caso contrario.
Seleccione " Elegir programa predeterminado '
Seleccione ADE si está en la lista,
Si no es así , seleccione ' más opciones ' y navegue hasta el archivo ejecutable ADE ( puede estar en C: Editions \ Archivos de programa \ Adobe \ Adobe Digital \ digitaleditions.exe )
Ahora archivos .epub / .acsm deben estar asociados a ADE , y haciendo doble clic deberían funcionar.
A veces , Windows le permite ir a través de todo eso, pero luego se niega a hacer la asociación que usted ha pedido .
En ese caso, la única forma que conozco es el uso de un programa de asociación de archivos de terceros.
http://www.softpedia.com/get/System/System-Miscellaneous/Types.shtml funciona para mí .
~~~~
Sometimes the registration of ADE to Windows as the default hander for .acsm and .epub files does not work;
that is what causes the double-click in Explorer to fail; and usually prevents opening from the browser as well.
especially in Windows 8/8.1, and maybe 7;
this appears to be a bug in Windows (for once not a bug in ADE).
Two possible ways round it.
First, try to force it in Explorer
Right-click on a .epub file (and repeat entire sequence for .acsm if necessary)
Select 'open with' if on the list, 'open' if not.
Select 'choose default program'
Select ADE if it is on the list,
If not select 'more options' and navigate to the ADE executable (may be at C:\Program Files\Adobe\Adobe Digital Editions\digitaleditions.exe)
Now .epub/.acsm files should be associated with ADE, and double-clicking should work.
Sometimes, Windows allows you to go through all that, but then refuses to make the association you have asked for.
In that case, the only way I know is to use a third party file association program.
http://www.softpedia.com/get/System/System-Miscellaneous/Types.shtml works for me.

Can't download book; adobe reader shows up instead of ADE

I just installed ADE, when I try to download library books, adobe reader opens up instead of ADE. The book doesn't show up on ADE nor does my kindle

First check if there is an appropriate .acsm file in your downloads directory.
then open ADE, and drag drop that .acsm file from Windows Explorer/Mac Finder onto the running ADE.
If that works, then ADE is basically working but the file associations are wrong.
If so, follow details below.
If not, post back.
~~~~~~~~~~~~~~~~~~~
Sometimes the registration of ADE to Windows as the default hander for .acsm and .epub files does not work;
that is what causes the double-click in Explorer to fail; and usually prevents opening from the browser as well.
especially in Windows 8/8.1, and maybe 7;
this appears to be a bug in Windows (for once not a bug in ADE).
Two possible ways round it.
First, try to force it in Explorer
Right-click on a .epub file (and repeat entire sequence for .acsm if necessary)
Select 'open with' if on the list, 'open' if not.
Select 'choose default program'
Select ADE if it is on the list,
If not select 'more options' and select ADE is on that list.
If not, at the bottom of 'More Options' list is 'Look for another app on this PC', select that
and navigate to the ADE executable (may be at C:\Program Files\Adobe\Adobe Digital Editions\digitaleditions.exe)
Now .epub/.acsm files should be associated with ADE, and double-clicking should work.
Sometimes, Windows allows you to go through all that, but then refuses to make the association you have asked for.
In that case, the only way I know is to use a third party file association program.
http://www.softpedia.com/get/System/System-Miscellaneous/Types.shtml works for me.

Re: Know your Mobile Operating System

Is it possible to download music from my Acer A500 directly onto an ipod or do I need a pc?Does anybody know?

What exactly is on your 2nd HD? Is it the entire itunes folder (which contains your itunes database files) or is it just the itunes content folders (music, videos, podcasts, etc)?
The itunes database file is named iTunes Library.itl
If that is on your 2nd HD, then do a shift-start of itunes and select it.
By that I mean, press AND HOLD the shift key. Keep pressing until you see hte prompt to choose an existing library.
If you do not have your old database file, you will need to open Windows Explorer to the 2nd HD, and drag & drop the itunes folder into the itunes screen. Drop it on the word LIBRARY.

E1200 v2 Firmware 2.0.02 (Build 3) Feedback Thread

New firmware for E1200 v2 has been released.
Release Date: Mar 2, 2012
Last Firmware Version: 2.0.02
Note: This firmware is only compatible with hardware version 2 (v2), but not with hardware version 1 (v1).
Firmware 2.0.02 (build 3)
- Added control to the browser-based GUI, so that a user can manually enable/disable Wi-Fi Protected Setup.
- Resolved interoperability issue with ISP DHCP server that mandates client identifier option (option 61).
- Resolved issue with sending broadcast DHCP renewal message. The correct behavior is sending unicast message.
- Allow value of 255 in the 4th octet of L2TP server IP address.
Post your feedback here. Thanks.

I'm not sure which firmware this bug was introduced, but my current router (e1200) is running on firmware 2.0.02. My problem is slow download speeds on my wireless N devices when WMM is enabled. When WMM is enabled, I'm getting download speeds of .5 MBPS. When I disable WMM, my download speeds jump to 20mbps. I have noticed this issue on the following wireless devices.
iPhone 4s running latest Apple OS
Acer a500 tablet running latest version of ice cream sandwich.
Asus (pce-n10) wireless-N network adapter running on windows 7 (64bit)
My upload speeds are not effected just download speeds.

Unoffical FAQ ~ your question may be answered here

I have been helping people out with ADE for over a year now, and am now stopping being a regular contributer.
I copy below all the 'stock' answers I had for various situations.
Most of these should no longer be relevant as they should have been fixed long ago.
However, the recent release of ADE3.0 show that this is far from being the case.
These should all be in the official Adobe FAQ, but meanwhile here they are in a fairly random order with a very course index.
Not sure how to make internal links, so search for the keyword with ~~~
kobo~~~ desparate measures when a Kobo won't play ball with ADE
windows~~~ windows registration goes wrong so ADE is not automatically opened for .acsm/.epub (worse, reader is, and then refuses to read)
account~~~ spiel about how adobe accounts, email addresses and DRM books interact ~~ you get a wrong user message
Overdrive~~~ problems authorizing overdrive app on tablet
findaccount~~~~ how to find the account you are authorized with
bookaccount~~~ how to find the account a book is authorized with
nonauthorized~~~~ the problems of downloading a book while not explicitly authorized
confused~~~ sometimes ADE pretends to be registered when it isn't really
hacking~~~ extreme measures when authorization doesn't behave
differentdirectory~~~ how to use a different directory to save your ADE books
tablets~~~ ADE cannot see a tablet device, and use on Windows RT
bugs~~~ ADE2.0 is riddled with bugs (?is 3.0 any better). Here are some know bugs
alternatives~~~ ADE2.0 is riddled with bugs (?is 3.0 any better). Some alternatives
nomoredevices~~~ you have used up all your activations, so can't authorize new device
kobo~~~~~~~~~~~~~~~~~~~~~~~~~~
possible help with Kobo issues … I haven’t tried this
from post 23 in http://forums.adobe.com/thread/1124380?tstart=0 by Shirltaylor, Jul 26, 2013
Yes it was extremely frustrating process to read any library books after the upgrade to Adobe Digital Editions 2.0.
Eventually it turned out that the process must have you sign out of the Kobo device Account under settings on the Kobo Device.
What we did was to remove all library books from the Kobo device and from the Adobe Digital Edition
Next was to sign out of the Kobo Device as well as the Kobo Desktop on the PC as well as exiting from Adobe Digital Edition.
Next was to start up Kobo Desktop and sign in.
Next was to connect the Kobo device to the USB port.
This resulted in the Kobo device being upgraded and Sync'd to the Kobo Desktop. Wait until the Sync is complete
Disconnect the Kobo device from the USB port
Next was to restart Adobe Digital Edition and using CTRL-SHIFT-D to deauthorize the computer and select Erase Authorization.
Next was to go back to Adobe Digital Edition, Help and Authorize Computer
Next was to reconnect the Kobo device to the USB port
Next was to select the Kobo device in the Adobe Digial Edition and Authorize the device
Next was to get a library book in the Adobe Digital Edition and then add it to the Kobo Device
Everything seems to be working from then on.
Have fun reading again
windows~~~~~~~~~~~~~~~~~~~
Sometimes the registration of ADE to Windows as the default hander for .acsm and .epub files does not work;
that is what causes the double-click in Explorer to fail; and usually prevents opening from the browser as well.
especially in Windows 8/8.1, and maybe 7;
this appears to be a bug in Windows (for once not a bug in ADE).
Two possible ways round it.
First, try to force it in Explorer
Right-click on a .epub file (and repeat entire sequence for .acsm if necessary)
Select 'open with' if on the list, 'open' if not.
Select 'choose default program'
Select ADE if it is on the list,
If not select 'more options' and select ADE is on that list.
If not, at the bottom of 'More Options' list is 'Look for another app on this PC', select that
and navigate to the ADE executable (may be at C:\Program Files\Adobe\Adobe Digital Editions\digitaleditions.exe)
Now .epub/.acsm files should be associated with ADE, and double-clicking should work.
Sometimes, Windows allows you to go through all that, but then refuses to make the association you have asked for.
In that case, the only way I know is to use a third party file association program.
http://www.softpedia.com/get/System/System-Miscellaneous/Types.shtml works for me.
account~~~~~~~~~~~~~~~~
Adobe DRM books are associated with an Adobe account; once accessed on a device registered to a given account they can't be used on a device registered to any other account.
You must regain access to your old account and register your computer and other devices with it.
You should not create a new account if you want to keep your old books.
Each account has a permanent internal ID, and is at any one time associated with an external email ID.
The email does not need to be valid, (though it can only be verified if it is valid).
For example, if you lose an email address for some reason or another, it doesn't mean that address is no longer associated with the Adobe account.
The correct thing to do when you change email address is to associate the new email address with the old Adobe account.
Login to the Adobe account using the old (now invalid) email address and old Adobe password.
You can then goto Adobe ID/My Adobe ID and change the email address/external ID associated with the account.
If you have already made a new Adobe account using your new email and registered computers and devices with it, you must ... ... ...
Change the email address associated to your new Adobe account. Until you have done this you can't do step 3.
Many email providers allow variant addresses, such as [email protected] and [email protected]
Those will be the same as far as google is concerned but different as far as Adobe is concerned.
You can now abandon the new Adobe account
Change the email address associated to your old Adobe account to your new email address.
Deregister your computer from the new (now dead) Adobe account, using ctrl-shift-D (cmd-shift-D if on a Mac)
Deregister any ereader devices registered with the account, using ctrl-shift-E (cmd-shift-E if on a Mac) to ADE with the device plugged in
Reregister the computer with the old Adobe account, using the new email address with which you associated it in step 3
(menu/Help/Authorize Computer, Library/Authorize Computer on the older more reliable v1.2.7)
Reregister any ereaders
(menu/Help/Authorize Device, Library/Authorize Device on v1.2.7)
findaccount~~~~~~~~~~~~~~~~
A book is associated with the AdobeID in use at the time the book was downloaded (.acsm token file turned into encrypted .epub/.pdf file).
An AdobeID has two forms, internal (something like 'urn:uuid:ff2ddc22-eca0-46c6-a84d-xxxxxxxxxxxx') and external (email address).
The authorization mechanism on the book is associated with the internal ID.
The internal ID for an account never changes; you can change the email address it is currently associated with on the Adobe website.
You can check the Adobe ID ADE is using in internal and external form in ADE2.0 using ctrl-shift-I (Help/Authorization Information).
For ADE1.7.2 you sadly only get the external ID, using Library/Authorize Computer (which acts as a query if already authorized).
You can check the AdobeID in external form in Bluefire.
In either case, if you have changed the external ID associated with the account since authorizing the device,
you may be told the old external ID, or may be told the up to date one.
You can check the AdobeID associated with a book in internal form with the rather roundabout method at the bottom of this post.
I don't know of any way of finding the current external ID given the internal ID of the book;
unless it is an ID you still use in which case the matching values from ADE2.0 will tell you.
bookaccount~~~~~
OK. To find the internal AdobeID.
open a sample DRM .epub file as a .zip file.
With some zip programs, you can just open the .epub as an archive (ev, with 7zip),
with others you will have to rename the .epub file to a .zip file first, then open it.
find the file 'rights.xml' within the zip. Probably 'META-INF\rights.xml'
open the rights.xml file
inside you will find a section '<user>' that looks something like
<user>urn:uuid:ff2ddc22-eca0-46c6-a84d-xxxxxxxxxxxx</user>
That string is the internal version for your AdobeID.
That stays fixed for the AdobeID, even if you change the associated email (or password),
that internal ID is what is really associated with the book.
(n.b. there is no point in trying to change the urn to a current one you might find and recreating the .epub file; the DRM is cleverer than that).
You can now contact Adobe at Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html
It may be that if you can give them that internal ID they will be able to get you access to your account again.
If they say they can't, it might be worth trying two or three times at intervals;
it seems from what others have said that some of the representatives are very clued up, but others are not.
(I've never used the Live Chat).
If you do go through all that, let us know how you got on.
Overdrive~~~~~~~~~~~~~~~~
Sometimes Overdrive has issues with authorization (I have seen from other posts, not experienced).
Try the Bluefire app and see if that will authorize.
If it does, you can use it instead of Overdrive to read Adobe DRM books such as library books; but can’t use it to borrow them.
Also... Even though registration is done via the app, it applies to the device rather than the specific app. It may be that registering Bluefire causes Overdrive to start working, but I’ve never seen that confirmed.
nonauthorized~~~~~~~~~~~
This is a vicious trap that Adobe lays for unsuspecting customers.
They do give very mild warnings, but not nearly strong enough.
When you register 'without ID', ADE creates an anonymous/implicit ID with limited powers (eg can't be used to share with other devices).
Whenever you first load a DRM book, that copy of the book is associated with whatever ID the computer is registered to at the time.
Any book you load while this anonymous ID is active gets associated with that ID, and can't be read on any other device.
When you properly register your computer with a real ID, that old anonymous ID is lost.
Now you don't have any devices that can read the book.
The only way I know round this is to use a DRM stripper such as epubee BEFORE you deauthorize the device.
I do NOT advocate using such code to get around the valid limitations placed on a DRM book.
However, where the problem arises only because of the ineptness of Adobe's ADEPT DRM infrastructure and its implementation,
such a measure is totally justifiable.
confused~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
hacking~~~
Useful information about registration, uuid etc: ( http://www.jiagouyan9.com/archives/tag/6040/)
http://forums.adobe.com/thread/905348?start=0&tstart=0
registry [at HKEY_CURRENT_USER\Software\Adobe\Adept\Activation\0000\0000\\value etc]
differentdirectory~~~
There's no way to do it from Digital Editions itself.
You can do it by making directory junction (on PC, and I'm sure Mac has something similar).
Move the directory and any files you already have from .../My Documents/My Digital Editions to wherever you want them.
Open a command prompt
Navigate to .../My Documents.
Type mklink /d "My Digital Editions" "wherever you put the directory"
The new directory does not even need to be on the same drive.
tablets~~~~~~~
Adobe Digital Editions does not generally recognize tablets, only dedicated ereaders.
For a tablet, install compatible Adobe DRM ereader app. I suggest Bluefire; also consider Akdiko or Overdrive but some people have issues registering them. Some tablets come with such an app preinstalled. Authorize the tablet from within the app to use your Adobe ID (details vary from app to app, usually somewhere within Settings)
The tablet may well be able to download books without use of ADE at all. If you do want to transfer books from ADE/computer, use a file manager (Windows Explorer, Mac Finder) to copy to the tablet as mounted drive, or use a utility such as Dropbox.
Very limited choice on Windows RT tablets, try DReader or DL Reader
DL Reader app for Windows RT http://apps.microsoft.com/windows/en-gb/app/dl-reader/0be254fa-1323-4bda-92fa-698fe502456c
~~~~~~~~~
bugs~~~
ADE2.0 is riddled with bugs (?is 3.0 any better). Here are some known ones (that have been around for years)
Bugs caried over to ADE3.0,
no easy option to reauthorize (design bug)
Authorize Computer should not be greyed out when authorized:
it should give a warning 'Do you want to deauthorize first? You will lose access to the books belonging to the old account/ID
and then if you acccept deauthorize and allow you to reauthorize.
hidden deauthorization (design bug)
won't work with library books and (some?) Sony ereaders (see separate post) (code bug) (1.7.2 resolves)
I can't check whether it also still has some of the other standard issues with ADE2.0 that regularly show up on this forum
Insufficient warning of the bad effects of implicit authorization
Prone to not working immediately after install, especially on XP (1.7.2 resolves)
Prone to suddenly stopping working after a time even when it worked before (1.7.2 resolves)
Prone to failure to scroll pages. (1.7.2 resolves)
Incomprehensible error messages. (1.7.2 not quite so bad)
Prone to confused registration, pretending to be registered when it isn't
Incorrect error messages, in particular
ID is already in use on another computer and cannot be reused.
as a message further to confuse users already hit by bug 6.
alternatives~~~~~~
For DRM free ebooks, use the free and vastly superior Calibre. http://calibre-ebook.com/
For DRM ebooks, you can use Sony Reader; free download from Sony intended to run with Sony eReaders but works quite happily without. I prefer ADE1.7.2 to Sony Reader. https://ebookstore.sony.com/download/
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.
nomoredevices~~~
Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
Choose topic ‘'Signing into my Account' , and then click on 'I still need help';
then you should see 'Chat with an Agent' at the bottom of the page.
Depending on screen resolution, you may need to scroll down a bit to see the Chat with an Agent' bit, just under 'Ask our Experts'.
'Ask our experts' will indeed just lead you back to this forum.
Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, and agent is available’.
They can reset your authorizations, and then you must reauthorize any devices you still need.
(Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations (E_ACT_TOO_MANY_ACTIVATIONS) . Thanks to AJP_Bear for that tip.
~
~~~

Do you have any tips out suggestions for when ADE can't download the epub book from an ACSM file? The problem seems to be related to something blocking the process, but no one has a clue as to the source of the problem. See my post fot more information:
http://forums.adobe.com/message/6179746#6179746
Thank you for any suggestions you are able to offer.

Whenever I connect my iPad 2 to my PC, then open iTunes, I get an error message telling me that iTunes has encountered an error and needs to close.

I recently updated my iPad 2 to iOS 5 beta 2 and updated iTunes to the second beta. Now whenever I connect my iPad toitunes,it instantly pops up with an error message saying "iTunes has stopped working. A problemcaused the program to stop working correctly. Please close the program." iTunes still mdetects my other two iPhones and iPod touch on 3.1.3, 4.1, and 4.2.1. Also, iTunes will recognize my iPad just fine on the administrator account.

You are using ADE on Windows or Mac ? and their versions ??
Please restart your machine and try once again.
Thanks

ADE on Window 7 & Acer A500

Similar Messages

Maybe you are looking for