ADF 10.1.3 - Issue with link item on the menu1 of panelPage

Hi
I tried to add two menu tabs in the menu1 item of panelPage and added CommandMenuItem for the nodeStamp they are not showing up.
2. I have a link item on the page, when I click the link, it is throwing error alerts related to all the required columns on the form. My requirement is to navigate to the selected link without worrying about any of the columns on the page.
Thanks again for your help in advance.

Hi.
for the first question, there is not enough information you provide to understand what the problem is. A code example of how you build the tab will help
2. set the "immediate" attribute on the link to true"
Frank

Similar Messages

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

REPORT WITH CHANGING ITEM ON THE SAME COLUMN

Hi to all,
i'm trying to build a report with different item in the same column.
Is that possible in any way using other Oracle technique?
i'm not doing anything specific here, only i would like to know if the following possibility exist or not and how can i let apex render the htmldb_item fields 'dynamically'.
Using this CODE inside a PL/SQL function body returning sql query I obtain the following report content. Such the code of htmldb_item.fields is written, as a field value the HTML_ITEM is not rendered, so only the description of them appear in the report.
Does somebody know some tricks to make it work?
Thanx a lot
1     2     LAST_CALL     htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,'dd/mon/yyyy') VALUE
21     1     AGE     htmldb_item.text(4,FLD_VALUE,10,10) VALUE
create or replace FUNCTION FNC_GEN_GUI_ITEM(ITEM_TYPE NUMBER) RETURN VARCHAR2 AS
STRHTMLDITEM VARCHAR2(4000);
BEGIN
CASE ITEM_TYPE
WHEN 1 THEN STRHTMLDITEM:=' htmldb_item.text(4,FLD_VALUE,10,10) VALUE ';
WHEN 2 THEN STRHTMLDITEM:=' htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,''dd/mon/yyyy'') VALUE ';
END CASE;
RETURN STRHTMLDITEM;
END FNC_GEN_GUI_ITEM;
MY TABLE AS FOLLOWS:
CREATE TABLE "NEWPROJ"."DINFIELDGUI"
(     "ID" NUMBER NOT NULL ENABLE,
     "FLD_TYPE" NUMBER,
     "FLD_NAME" VARCHAR2(4000 BYTE),
     "FLD_VALUE" VARCHAR2(4000 BYTE),
     CONSTRAINT "DINFIELDGUI_PK" PRIMARY KEY ("ID"));
Message was edited by:
Marcello Nocito

Hi to all,
i've solved, is very simple using decode inside the select:
SELECT
ID,
FK_HTMLDB_ITEM, DECODE(FK_HTMLDB_ITEM,1,HTMLDB_ITEM.DATE_POPUP(3,rownum,VAL,'dd-mon-yyyy'),2,HTMLDB_ITEM.TEXT(3,VAL)) VALORE
FROM TESTID
my table is:
CREATE TABLE "DEV"."TESTID"
(     "ID" NUMBER NOT NULL ENABLE,
     "FK_HTMLDB_ITEM" NUMBER,
     "VAL" VARCHAR2(4000 BYTE))
Bye Bye

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
Jo

Hi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

Click here for the instructions on stopping the emails.
(85713)

I am having issues with being kicked off the internet intermittently. ATT says its not an issue with their service. Does anyone have an idea?

I am having issues with being kicked off the internet intermittently. ATT states its not an issue with their service. Any ideas?

Yes it is NOT your internet service. It is Apples OSX. It seems to be happening to older computers trying to run the newer OSX ( Mavericks and newer). I have a 2009 iMac I bought with Leopard installed, I upgraded to Snow leopard 10.6.8 and my computer was running flawlessly. I upgraded to Mountain Lion and I noticed my computer running slower... kind of annoying having to wait longer for everything (start up, browsers opening up, apps opening up, mail opening up and so on) Mavericks came out for free and I was excited to get out of this issue. Well, everything went from bad to terrible! Fast user switching had a glitch with desktop picture resetting to the wave, mail rules didn't work properly and I kept getting kicked off the internet (Absolutely NOTHING wrong with my internet). No one could figure out what was going on or how to fix it, even senior Apple tech's! After 3-4 months of searching, troubleshooting and waiting for a fix, I looked at my Mac Pro running Tiger 10.4.11 with no issues what so ever... that is when I made an executive decision. GO BACK TO SNOW LEOPARD! Since May 2014 I have been running 10.6.8 on my 2009 iMac and it has been smoking fast with NO issues what so ever, especially since I maxed out my memory for Mavericks. So to sum it up: some people might get lucky with old machines running new operating systems, but for the most part, it seems older processors can't keep up with the new sophisticated operating systems. Mavericks... Yosemite... FREE UPGRADE! But you will pay the price

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

I am exporting a 2 min video, using a custom compressor setting. i have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

Name: Vimeo HD Encode
Description: No description
File Extension: mov
Estimated size: 2.3 GB/hour of source
Audio Encoder
          AAC, Stereo (L R), 44.100 kHz
Video Encoder
          Width: 1920
          Height: 1080
          Pixel aspect ratio: Square
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls On:
                    Retiming: (Best) High quality Motion Compensated
                    Resize Filter: Statistical Prediction
                    Deinterlace Filter: Best (Motion Compensated)
                    Adaptive Details: On
                    Antialias: 0
                    Detail Level: 0
                    Field Output: Progressive
          Codec Type: H.264
          Multi-pass: On, frame reorder: On
          Pixel depth: 24
          Spatial quality: 75
          Min. Spatial quality: 25
          Key frame interval: 30
          Temporal quality: 50
          Min. temporal quality: 25
          Average data rate: 5.12 (Mbps)
Compatible with Mac
My video in the timeline is 1920 x 1080 / 23.98 fps
I've installed Toast and photoshop elements recently, i also updated my apps the other day.
I have had this problem before the updates of the apps though

Issues with play back in the time line

I am having issues with play back in the time line.
am working with footage captured off a DVCAM Tape in a DV/DVCPRO NTSC Time line.
My settings are set to match the source footage so I dont have to render. What ends up happening is the footage at times plays fine and smooth and then out of no where it will start playing choppy. like its lagging. But the Audio stay fine. I use to have to problem before but then it stopped.
Now its back and I can not figure out why it does this. Usually a restart of the system would help solve it but now it still keeps coming back.
i have tried different settings in the RT menu and still seem to be having the same problem.
i am running the footage of 3 1TB drives in Raid0 and the System has 16GB of Ram. So I dont see this being the issue.
any ideas?

of course not, the system boots from a 320GB Western Digital Hard Drive. (the one that came with the system)
I have a feeling that its not the Hard Drive, but no idea what it could be.

Having an issue with a page in the internet

Hello,
I registered to the forum a few days ago but did not introduce myself. Please accept my apology.
I have a Blackberry style 9670 model, of which I am very happy with.
I was having an issue with a page in the internet, in which I was receiving errors on my device. My daughter has a Blackberry Curve and she was able to access the page without any errors. I can not figure out why I do.
Thanks

I am not sure if this is the same issue but there was a bug that caused small exchange numbers to become negative which was resolved in one of the 11.1.1.3 patches, it is worth logging into My Oracle Support and having a look at the patches available.
9588147 – In exchange rates table, entering very small values become negative after you save the data forms. For example, 0.000071 becomes –7.1E-5 after you save the exchange rate.
Cheers
John
http://john-goodwin.blogspot.com/

I have and audgiy card with us 5.25 drive but i lost the cable with link it to the sound c

have and audgiy card with is 5.25 dri've ,but i lost the cable with link it to the sound card/
the model number of the 5.25 dri've is sb000/
serial no:tsb004007876.
is thare any way i can buy the cable form you?

Just to confirm, you are logged into the iTunes Store using the account in which the balance exists, and the balance is showing at the top of the iTunes Store window? And you're not trying to purchase gifts for someone else?

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Only concrete way is to use it less sorry see here every method possible has been tried
https://discussions.apple.com/thread/4329696?start=2970&tstart=0

ADF 10.1.3 - Issue with link item on the menu1 of panelPage

Similar Messages

Maybe you are looking for