[ADF-11.1.2] Protecting data, even from DBA

Hi,
I am looking for a way to encrypt/decrypt database records of specific table at Application level without loosing BC Features like search functionality.
Reason: I don't want to expose clean records even to customers/DBA as I want them to come back to us for such usecase - e.g.: Generating Reports.
I had started working on this one by encrypting values while storing, and decrypting while reading but I released that I will be loosing ADF features like Search.
So is there anyway I can protect data from DBAs w/o loosing BC features ?

Is this question related to the original post?
I don't see the connection :(
Anyway, who decides how to do the translation? Does 'A%' always mean 'ABC' and 'ACD'?
What if the user enters 'AB%' or 'B%'?
There are two possible solution:
1) http://jobinesh.blogspot.com/2010/12/using-oraclejbodomainarray-with.html
2) http://tompeez.wordpress.com/2011/08/21/extending-viewcriteria-to-use-sql-contains-4/
You still have to answer the above questions and implement it using either of the above techniques-
Timo

Similar Messages

Data recover from a hard drive error 301

Can anyone advise me of how to recover data from a hard drive error 301. I have a pavilion dv7-4177 and i received the hard drive error code 301 two weeks after the warranty expired. I back up my data so I though but when tried to reload that data on a new hard drive it would not take. The damage hard drive will not load the OS now even in safe mode. Is there any way to retrieve this data from that hard drive.

Hi,
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can data be restored, if BB Protect is wiped from a stolen phone???? HELP!!!

Lost or Stolen BlackBerry -- What to do to retrieve data?
Hello,
I have a problem that goes a step further--my BB had BB Protect installed, but no password protection, when someone stole my phone. The carrier tells me that whomever has it has "wiped" the device (master reset?).....is there any way to restore my data when my new phone arrives? Or, I also have Total Equipment Protection app--can that help me?
The only pictures I had of family, some members who have passed away, were on the memory card. If I can't locate the phone, they are lost :' (
But there are also hundreds of phone numbers I infrequently call, but are my only connections to important people in my life; then there's also phone numbers for jobs I've applied to and the numbers I'm supposed to follow up with calls to (and names, email addresses, etc)?!
It seems like the owner of the BB Protect app should be able to retrieve their data somehow, that it shouldn't get wiped from the Protect account, even if someone wipes the phone. Please tell me there is some way?
I really need all the info I can get--is there any way to restore what the theif wiped, at least???
Any help would be much appreciated!

You can restore the BB Protect data to any new device. The data is backed up to a server, so the individual device is of no consequence. However you have to take note of what data BB Protect actually backs up... Not everything you listed is actually backed up by BB protect. For example BB Protect does not backup pictures. Those are only stored locally on the sdcard unless you uploaded them somewhere.
http://docs.blackberry.com/ko-kr/smartphone_users/deliverables/25582/Switch_devices_1137911_11.jsp

Itunes error. the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention helps protect against damage from viruses and other threat.

I have a windows Xp computer. and i needed to download the newest itunes to support my ipod touch. but now my computer doesn't let me open itunes. The the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention (DEP) helps protect against damage from viruses and other threat." I tried excluding itunes from DEP on settings but it still doesn't work. I don't know what to do. please help me!!!
thanks

try to select the computer cd/dvd autorun off.
I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

Not able to access SOAP web service data control from adf mobile

Hi,
I am trying to call web services from adf mobile..
I have created data control from external web service and it is perfectlly working on web browser..
But why it is showing an error on emulator??
Is there any .jar file missing in adf mobile so that it is not supporting a web service?
Or is there any other problem? Emulator is connected to network and I am able to run WSDL in emulator's browser..
Please help me to solve this issue..
Thanks,
Laxmi

Emulator is connected to network and I am able to run WSDL in emulator's browser..
Connecting to WSDL in the browser is not the same as connecting to WSDL in an application.
To access a web service from an Android device enable a permission in AndroidManifest.xml that allows applications to open network sockets. Add the following uses-permission element.
<uses-permission android:name="android.permission.INTERNET"></uses-permission>

Recovery of deleted data from Phone memory and Unlock Password Protected Data

I have lost password of my blackberry (Curver 8520) protected data and by mistake I have also deleted some contacts, sms and memos from phone memory of blackberry set. Can any one help me to get recover my password and deleted data or is their any recovery tool which can be useful for it?

Hi Kaushalbca
Welcome to BlackBerry Support Community Forums
By " BlackBerry Protected Data " do you mean BlackBerry ID password which we use for BlackBerry Protect ? If so , you can reset your password by following this KB Article :
KB26361 :How to change or reset a BlackBerry ID password.
After reset , you can use BlackBerry protect to restore your deleted data ( If you have a backup of those deleted data ) , You can also restore your data if you ever did a backup using Desktop Software . To restore data refer to those KB Articles :
KB25063 : How to use BlackBerry Protect to restore data to a BlackBerry smartphone
KB10339 : How to use BlackBerry Desktop Software to restore data to a BlackBerry smartphone from a backup file
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I need a data transfer from intact hard drive of older macbook that won't boot. Can Apple provide this service even though my one to one membership has expired?

I need a data transfer from a 2005 Macbook to my new one (2010). I damaged the old laptop and although it wouldn't turn on, when I brought it to the Apple Store they ascertained that the hard drive was still intact. They said I needed to purchase a one to one membership to get a data transfer, which I did, but somehow forgot about it and now it's expired. Is there any way I can still get the data from the old hard drive transferred to my new macbook? Can Apple provide this service even though my one to one membership has expired?

Go to OWC where you can purchase a suitable enclosure for the drive. You will need an enclosure for a SATA notebook drive. This is assuming the old computer is a MacBook and not an iBook. I make this observation because the first MacBook was released in 2006, not in 2005. If yours is a 2005 model then it's an iBook and uses an ATA interface.
Install the old drive in the enclosure, connect to your new computer. You can then transfer your data.

Create data control from java class, not see "ADF Parameter Forms" option

Hi,
I have created a Fusion Web Application (ADF) in jdev 11g. In the application model project, I created a java class. Inside the java class, I have a public method as below
public Asset [] searchAsset3(SearchTerm s) // SearchTerm is a java bean. It implements java.io.Serializable.
I created data control from my java class. After that, I see an xml file generated under the same folder of my java class. Here is the xml content.
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="11.1.1.53.62"
id="AIAAsset" Package="oracle.apps.aia.oer.model"
BeanClass="oracle.apps.aia.oer.model.AIAAsset" isJavaBased="true">
<MethodAccessor IsCollection="true"
Type="com.flashline.registry.openapi.entity.Asset"
BeanClass="com.flashline.registry.openapi.entity.Asset"
id="searchAsset" ReturnNodeName="Asset"
CollectionBeanClass="UpdateableCollection">
<ParameterInfo id="name" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="version" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="description" Type="java.lang.String"
isStructured="false"/>
</MethodAccessor>
<MethodAccessor IsCollection="true"
Type="com.flashline.registry.openapi.entity.AssetSummary"
BeanClass="com.flashline.registry.openapi.entity.AssetSummary"
id="searchAssetSummary" ReturnNodeName="AssetSummary"
CollectionBeanClass="UpdateableCollection">
<ParameterInfo id="name" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="version" Type="java.lang.String" isStructured="false"/>
<ParameterInfo id="description" Type="java.lang.String"
isStructured="false"/>
<ParameterInfo id="type" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
<MethodAccessor IsCollection="true"
Type="com.flashline.registry.openapi.entity.Asset"
BeanClass="com.flashline.registry.openapi.entity.Asset"
id="searchAsset3" ReturnNodeName="Asset"
CollectionBeanClass="UpdateableCollection">
<ParameterInfo id="s" Type="com.flashline.registry.openapi.query.SearchTerm"
isStructured="true"/>
</MethodAccessor>
<ConstructorMethod IsCollection="true"
Type="oracle.apps.aia.oer.model.AIAAsset"
BeanClass="oracle.apps.aia.oer.model.AIAAsset"
id="AIAAsset"/>
</JavaBean>
Then, in application user interface project, I created a JSPX page. From the data controls palette, I want to drag and drop the searchAsset3 onto my page. However, I don't see an option for me to choose "Create -> Parameters -> ADF Parameter Form". I only see "Create -> Methods". Unlike other public methods (e.g.searchAssetSummary and searchAsset) which have simple data type as input, I can see the "Create -> Parameters -> ADF Parameter Form" option when I drag and drop to my jspx page. Is that something I missed while creating data controls?
Thanks.
Arnold.

Then, my other question is how do you do the bindings? I drag and drop the attributes from SearchTerm bean. Now the pagedef file has the AttributeValues added but my method is actually expecting one input parameter of type SearchTerm. How do you bind the attributes to the input of the method? Thanks.
See below of my pagedef xml file.
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.53.62" id="SearchAssetBySearchTerm1PageDef"
Package="oracle.apps.aia.oer.view.pageDefs">
<parameters/>
<executables>
<variableIterator id="variables"/>
<methodIterator Binds="SearchTerm.result" DataControl="AIAAsset"
RangeSize="25"
BeanClass="com.flashline.registry.openapi.query.SearchTerm"
id="SearchTermIterator"/>
</executables>
<bindings>
<methodAction id="SearchTerm" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="SearchTerm"
IsViewObjectMethod="false" DataControl="AIAAsset"
ClassName="com.flashline.registry.openapi.query.SearchTerm"
ReturnName="AIAAsset.methodResults.SearchTerm_AIAAsset_SearchTerm_result"/>
<attributeValues IterBinding="SearchTermIterator" id="key">
<AttrNames>
<Item Value="key"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="SearchTermIterator" id="operator">
<AttrNames>
<Item Value="operator"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="SearchTermIterator" id="value">
<AttrNames>
<Item Value="value"/>
</AttrNames>
</attributeValues>
<methodAction id="searchAsset3" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="searchAsset3"
IsViewObjectMethod="false" DataControl="AIAAsset"
InstanceName="AIAAsset.dataProvider"
ReturnName="AIAAsset.methodResults.searchAsset3_AIAAsset_dataProvider_searchAsset3_result">
*<NamedData NDName="s"*
NDType="com.flashline.registry.openapi.query.SearchTerm"/>+
</methodAction>
</bindings>
</pageDefinition>

HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Thax

Profile with 2 Exchange accounts - Message received and recalled in one account is notified as recalled even from other account

When 2 exchange accounts are active on the same profile (e.g. Company A and Company B), and a message is received to one of the two account (e.g. internal mail in Company A), notification of recall is sent even from the second profile (Company B).
Therefore message sender from Company A is notified that message was sent even to an account of Company B, that can be a compliance issue regarding Client Data Protection when messages cannot be sent outside Company A.
This behaviour is not correct and should be solved, could you please check and solve the program bug?
Microsoft Office Professional Plus 2010 - Microsoft Outlook 14.0.7106.5003 (32-bit)

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Restrict sensitive data leakage from Printing, "Save as", Copying and Priting screen?

Our CEO highly suspected some of our staff who have sold the confidential drawings to competitors but we do not have enough proof. How can we restrict sensitive data leakage from Printing, "Save as", Copying and Priting screen?
Thank you for your advice in advance.

calmman8 wrote:
How can we restrict sensitive data leakage from Printing, "Save as", Copying and Priting screen?
That all depends on how much hassel you'll willing to go through. You can save an image from Photoshop as a PDF...then inside of Acrobat (can't do it in Photoshop) you have two levels os security. You can require password to even open a PDF and the 2nd level is to require a second password to be able to print, edit or change (once opened there's nothing you can do about screen captures).
So, you could then control the number of people that had the various password access to open or edit. But...keeping track of those passwords and making sure the people that need them have them can be an issue.
Note that a secured password protected PDF can have text, images, movies and audio–pretty much anything you might need. Also note there are some issues regarding the password encryption...I don't recall what level of encryption is capable of being exported to forgien countries...you should look into that if disctribution would be outside of the US.

Getting data transfered from old HD to new ones, leaving 2 slots filled . .

Hello,
*(Below is a thread I started in another forum, but, didn't get my final questions answered (see at bottom of this post in BOLD), and am hoping for further help and suggestions. I know there is a lot to read here, but, I think this information will help other novices, such as myself. Thanks!)*
I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?
OR, are there any other suggestions on a good setup with the 2 new HDs??
I'm open to suggestions.
I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0??
I'm doing video processing for DVD release.
Should I just max out the 2x1T gig HDs and not worry about a HD failure??
All Suggestions welcomed!!
Thanks, Jack
*FROM THE CUTTERMAN:*
You are limited with only 2 drive slots. In this scenario what usually works best is a small fast drive (eg Velocirapter or SSD) for OSX/Applications and a large drive for video files. It is not advisable to have the operating system running from a striped array.
Since you already have the drives, here is what you can do.
Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions. Be sure that it is GPT-formatted so it can boot.
Use CarbonCopy Cloner to copy your current OSX partition to the new one.
Set the startup disk as the new partition.
Remove the old drive and replace it with the second new one.
Reboot, and partition/format new drive.
*Hey Cutterman,*
Thanks for the advice. That sounds like a good set-up. I'll have to research the process of doing what you've advised, but, should work out ok:
A. Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions:
1. Partitions are done under Disc Utilities correct? Never done it before; will take a look.
B. Be sure that it is GPT-formatted so it can boot.
2. GPT is also done under Disc Utilities, correct? Here I start to get a bit confused, as I've formatted Extended Journal, SO, the partition with the OSX & Applications is formatted GPT, and the rest of the HD is formatted as Extended Journal?
C. Use CarbonCopy Cloner to copy your current OSX partition to the new one.
3. So, I partition the first new HD and use Carbon Copy Cloner (also under Disc Utilities) to copy the OSX & Applications from my original HD to the first new HD, correct?
D. Set the startup disk as the new partition.
4. This will be an option when I setup the partition???
E. Remove the old drive and replace it with the second new one.
F. Reboot, and partition/format new drive.
5. QUESTION: So, you recommend not striping the HDs: If I do a RAID 1, which sets up a mirror of the HDs, and since the first new HD is partitioned with the OSX & Applications, AND is set up as the Startup Disk, then the second new HD will also mirror that?? Another QUESTION: Even if the second new HD does not mirror the OSX & Applications, the second HD will only mirror the space/partition not utilized by the OSX & Applications partition, correct?
Thanks for your help!!
Jack
*FROM THE CUTTERMAN:*
OK I will try to answer your questions. To begin, if you want to mirror the 2 drives then you will need to boot from the SL install DVD or an external (USB/firewire) drive to set it up. IMO for your purposes it is too much hassle and a waste of HD space.
1) Yes partitions are created in Disk Utility
2) Yes, you choose a volume Scheme (ie number of partitions) and size them by dragging the separator bar. Then select the planned boot partition and click Options..., then choose GPT. I think it is usually the default but check and make sure. Extended journaled is the usual format.
3) You need to download Carbon Copy. It is a free tool that will copy the entire image of your current system partition to the new one and make it bootable. Consider making a donation as it is a very useful and frequently updated utility. It is fairly intuitive to use. You can also use the restore feature in Disk Utility but I have had more experience with Carbon Copy.
4) Once the copy process is finished the new boot partition will show up under the startup disk selections (this tool is in System Preferences).
*FROM 666Sheep:*
If may i correct one thing: OP, don't choose GPT (GUID Partition Table). You got PPC Mac (G5), so valid partition type for you is Apple Partition Map (APM).
GPT is for Intel Macs and you will not able to boot from this kind of partition.
*FROM THE CUTTERMAN:*
Thanks for the correction- my bad. No familiarity with non-Intel Macs.
G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD
*Hi All,*
*Since this process will come to a head on Tuesday/Wednesday, and I hope to be successful in transferring Old HD data to new HD/s.*
*A: I'm still a little foggy here, as I thought I'd set up the 2 new T-gig HDs so that if one of them failed, I'd still have the data backed up on the other HD; more ideas concerning this would be reassuring:*
*WHAT DOES "IMO" mean?*
*(IMO for your purposes it is too much hassle and a waste of HD space.)*
*As I understand the points made: After I partition the first new HD, and Carbon Copy data from old HD, I then install second new HD, and this will just act as an overflow from the first partitioned HD, correct? Because, if set up a Raid1/Mirror, the OSX partitioned portion of the first new HD will not copy to the second new HD, and that space on the second new HD will be wasted, correct?*
*Also: I have to set up RAID1 (if I do not set up RAID0), correct?*
*RAID 1*
*From WIKI: RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio real time mirroring. The contents of each disk in the array are identical to that of every other disk in the array. A RAID 1 array requires a minimum of two drives.*
*Carbon Copy is a free tool that will copy the entire image of your current system partition to the new one and make it bootable.*
*1. Is my old HD partitioned? Is that done automatically by MAC prior to PC purchase?*
*2. Do I Carbon Copy the whole old HD or just parts? (eg. OSX, Photo Shop, After Effects, Various Files)*
*3. I read that it is necessary to DEACTIVATE Photo Shop (I have CS3) prior to doing Carbon Copy. Is that correct? If so, does this also apply to other Adobe applications? Such as After Affects, Illustrator??*
*Thanks to all for the help!!*
*G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD*

Confusing Information:
A1: You also want to make sure the drive you are backing up to is formatted Mac HFS Extended (HFS+) if using Mac OS 8.1 or above.
A2: On PowerPC Macs, your clone should be partitioned as Apple Partition Map.
*Q? I thought the new HD (1T) should be formatted in Extended Journaled?*
B: Also disable Spotlight (in 10.4 only) on your destination drive using Apple menu -> System Preferences -> Spotlight -> Privacy to add the destination drive to the pane.
*Q? I'm using 10.4.11, so, I should follow these instructions?*
C: If possible, boot into safe mode to perform the backup (holding the SHIFT key at startup). In addition, you can clone while logged into another administrative user that you don't use at all to avoid further complications of changes which may be happening to your regular user (though don't use Fast User Switching to get into that other user, since that other user is still active when fast user switching is used). Otherwise you are going to be running a backup on a live system which could have changes happening while you are attempting to backup. These may yield an imperfect clone, with uncertain success at recovery. It may be possible that your clone will have its own hardware issues, so make at least two copies.
*Q? ?????????????*
*I GOT THE ABOVE INFO. FROM THE FOLLOWING SITE:*
Making a clone/mirror/duplicate backup
http://www.macmaps.com/backup.html#SHORTANDEASY
*ALSO, WHAT DO YOU THINK ABOUT THE ADVICE ON THIS PAGE:*
http://www.levoltz.com/2010/04/21/how-to-transfer-data-to-your-new-hard-drive/

Passing date parameter from forms to report

Hi,
I'm using forms and reports 6i.
I want to pass one date parameter from forms to reports.
Using
Add_Parameter(pl_id,'P_FROM_DATE',TEXT_PARAMETER,:FROM_DT);
giving me error REP-0091- Invalid value for parameter 'P_FROM_DATE'
This i think is because report expects date and here it is converted as varchar.
Please help

Hi Divya,
Even I use this kind of statement
Add_Parameter(pl_id,'P_FROM_DATE',TEXT_PARAMETER,:FROM_DT);and works fine for me.
This i think is because report expects date and here it is converted as varchar
Correct.
Open the report in the builder and under Data Model -> User Parameters, Go to the Property Inspector of P_FROM_DATE. Under Parameter, set Datatype as Character instead of Date.
Hope this should work. and tell me if it works(coz it wokred for me).

In ADF how can i insert data in multiple table if they have foreign key

I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.

Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please?

Can a IDOC be used for data exchange from R/3 to CRM

Hi All,
First, can a IDOC be used for data exchange from R/3 to CRM
I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
To achive this can I use IDOC?
Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
Please respond immediately.
Regards,
Gopinath

IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
Hope this helps,
Kai

[ADF-11.1.2] Protecting data, even from DBA

Similar Messages

Maybe you are looking for