ADF application taking more time for first time and less from second time

Hi Experts,
We are using ADF 11.1.1.2.
Our application contains 5 jsp pages, 10 - 12 taskflows, and 50 jsff pages.
For the first time in the day if we use the application it is taking more than 60 sec on some actions.
And from the next time onwords it is taking 5 to 6 sec.
Same thing is happening daily.
Can any one tell me why this application is taking more time for first time and less time from second time.
Regards
Gayaz

Hi,
If you don't restart you WLS every day, then you should read about Tuning Application Module Pools and Connection Pools
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0301
And pay attention to the parameter: Maximum Available Size, Minimum Available Size
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0314
And adjust them to suit your needs.

Similar Messages

Interface is taking lots of time for first time execution

Hello all,
I have one inbound interface in which i am updating T-code CO01 ,CO15 , MIGO and MB1A respectively
depending upon the condition in the incoming file.
When ever i run this interface for the first time it takes lots of time for execution, but when i run the same interface again with the same file it is taking half time of the first time execution.
I am not able to understand why it is taking lots of time for first execution and after that execution time is redued very much with the same file
Kindly help
Thanks
Sachin Yadav

thank you santhosh for your reply..
as this program is in Production system it it taking 3 to 4 hour to execute.
Previously it was OK but from last 2 to 3 moths it is taking more time.
when i debug the code it is working fine. I din't find any point at which it is taking more time.
I am not aware about buffers and SAP memory. can you plz help
Do you have any idea why this is happening.
Or how can i rectify the problem?
Thanks
Sachin

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing.

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing. Has anyone experienced similar problems and any suggestions?

Has the device always behaved this way? Did this start as a result of an update to the iOS software? If the problem is that bad, you should probably restore the iOS software and then restore from a backup. If that fails, restore as new and rebuild the device. If that fails, it's time for a trip to an Apple Store to let them have a look at the iPad.
Use iTunes to restore your iOS device to factory settings

HT3702 I have two charges to my credit card for the same dollar amount at two different times. First on 2/27/14 & second on 3/25/14 for $4.34. today's is pending payment and last months has been removed form my account. I have not purchased anything.

I have two charges to my credit card for the same dollar amount at two different times. First on 2/27/14 & second on 3/25/14 for $4.34. today's is pending payment and last months has been removed from my account. I have not purchased anything.

If they are regular payments for the same amount then it sounds like you have an auto-renewing subscription - there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098

My new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.

my new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.
At first my computer had issues. Once it go to sleep it will not back again. I dropped my laptop at apple store to fix it. After 10 days they returned my laptop saying they were no able to fix the problem so they replaced motherboard aiming if that might help. Acttually that didn't help.I had same issue again. I visited apple store again. This time they said they could fix, if I will allow them to format the harddrive. I said ok. They formatted it. It was working fine for few daysAfter few days compter is taking.even more than 15 min to shutdown. Now computer has another problem. It is being hang frequently like every 20'to.30 min.
I don't know what to do? I still have one month left on first year warranty. I have requested couple times to apple associates either to fix or replace or refund. They are showing me rude behavior. They are not understanding my situation. I am a student. I need to do lot of home work. Since last three month my mac book and apple associates giving me hard time. Any suggestions are welcome.

Contact Apple Customer Care - not Apple Care - Customer Support. Have your receipts handy and/or case numbers. Be patient, be calm, and tell your story just as you have here. I get the sense you are not in the US and don't have access to an Apple Store but are going to an independent shop. This makes using Customer Support all the more important. If phoning isn't viable, use registered mail.
Since time is running short, be prepared to purchase AppleCare to exennd your warranty 2 more years. Yes, you shouldn't have to do this, but it gives you added protection and more opportunities over the next 2 years to claim a replacement computer if you don't get one immediately. After dealing with a similar unhappy situation with a Mac in the late 1990s I finally got a replacement computer and reimbursed for the AppleCare policy.

39L4363D - Unable to set padding time for recording start and end time

Hello,
I have a problem with my 39L4363DG tv (Software 7.1.90.34.01.1).
I'm not able the set padding time for recording start and/or end time as described in the [manual|http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. Both menu item "start padding time" and "end padding time" are disabled?
Can anyone help me and give me an advice on how to solve it?

Hi
The padding time can be set for programmed recording.
There is also an scheduling priority
If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly.
When +Start Padding Time+ and +End Padding Time+ are set, the start time and end time will be the time plus the additional minutes.
If scheduling times overlap, priority will be given to the programmed recording which starts first.
When the programmed recording that started first ends, recording will switch to the next scheduled programme.
At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded.

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Every time i try to connect to firefox a message says the connection is untrusted, when i click get me out of here it goes to another firefox page and the it opens ok firefox opens as http first and then the second time it opens as https

help every time i try to connect to firefox a message says the connection is untrusted, when i click get me out of here it goes to another firefox page and the it opens ok firefox opens as http first and then the second time it opens as https

hello adzuki45, you already appear to run the latest version of firefox, so this shouldn't be a cause for concern, maybe your desktop shortcut is just misnamed).
when there's a problem with installing flash, please see if it works with the full installer that is available at http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_header

External hard drive used for Time machine is full and having a hard time backing up. what should I do?

External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?

For All things Time Machine see Pondini's Excellent Infirmation here...
http://pondini.org/OSX/Home.html
Start with FAQs and Troubleshooting.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

"Show my windows and tabs from last time" not working, Mac OS 10.6.4, FF 3.8.10 or FF 4 Beta 6

I have tried any number of times to get this to work, but it's still not working. On my other Mac with OS 10.6.4 and FF 3.6.8/10 the "show my windows and tabs from last time" is working just fine.
I have checked some of the settings in about:config per some of the other forum posts with resolution to this issue, but this hasn't worked for me. Especially Since some settings have changed in the more recent versions of FF.
I'm pretty sure my settings are correct. Is anyone else having this same issue?
On the Mac exhibiting the issue it prompts me if I want to close all open tabs when the red X is clicked, when I quit firefox it keeps my tabs open just fine when firefox starts up the next time. This is normal behavior, but when the feature in question is active it overrides this behavior, on my other mac, and just stores my last session so that when I open firefox all is as it was before it was closed (either closing it via quit or with the red X will do the trick).
On my new mac, the prompt to close open tabs never goes away and my tabs just vanish, whichever way I close firefox.
I hope that was clear enough. Thanks for any help.

See http://kb.mozillazine.org/Session_Restore
If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

Use different "fx-border-image-source" for first tab and remaining tabs

Hi,
I'm using something like this
.tab {
-fx-padding: 0px 5px -2px 5px;
-fx-background-insets: 0 -20 0 0;
-fx-background-color: transparent;
-fx-text-fill: #c4d8de;
-fx-border-image-source: url("images/tab5.png");
-fx-border-image-slice: 20 20 20 20 fill;
-fx-border-image-width: 20 20 20 20;
-fx-border-image-repeat: stretch;
-fx-font-size: 22px;
.tab:selected {
-fx-border-image-source: url("images/tab-selected5.png");
-fx-text-fill: #333333;
     -fx-background-color: red;*/
to customize the tab appearance of a TabPane.
That worked well. But I need to use a different set of images for just the first tab. Does anyone know a way to accomplish that?
Thanks.

How can I "fix up" the first tab of tab panes that are created after I "fixed up" the first tab of the initial tab pane?
My app allows user to create new tab panes at any moment during program execution.Not easy to answer this one.
The best answer would be to use structural pseudoclasses, but (as David points out), they are not yet implemented.
The trick here is how to identify the first tab of each tab pane so that it can be styled separately from the other panes.
Doing the styling without a dynamic lookup is preferrable to using a dynamic lookup (i.e. when the first tab is created give it a specific style, e.g. tab0).
This is how the charts work, where they set style classes based on series of data, e.g. series0, series1 - this allows you to independently style each series of data.
However the chart stuff has all of that built into the implementation, whereas the tabs don't. To achieve that you would likely need to go into the TabSkin code (http://openjdk.java.net/projects/openjfx/) find out where and how it generates the Tab nodes and write a custom tab skin or extension of the existing one which assigns a numeric style class to each new tab in a pane (e.g tab0, tab1, etc). In other words, not particularly easy if you are unfamilar with the tab skin implementation. You could log a javafx jira feature request to have those style classes set on tabs - file it here => http://javafx-jira.kenai.com.
In the meantime a simple alternative is to use the dynamic lookup method in my previous post and a hack such that whenever you add a new tab pane to the scene you do something like the following:
new Timeline(
new KeyFrame(
    Duration.millis(50),
    new EventHandler<ActionEvent>() {
      @Override public void handle(ActionEvent arg0) {
        Node tab = newTabPane.lookup(".tab");
        if (tab != null) tab.getStyleClass().add("first-tab");
).play();The reason for the Timeline is that I don't really know at what stage the css layout pass is executed. I know that when you initially show the stage and then do a lookup, the css pass seems to have already been done and the lookup will work. But for something that is dynamically added or modified after the scene is displayed - I have no idea when the css layout pass occurs, other than it's some time in the future and not at the time that you add the tabPane to the scene. So, the Timeline introduces a short delay to (hopefully) give the css layout pass time to execute and allow the lookup to work (not return null). Not the best or most efficient solution, but should work for you.

Why doesn't firefox save my windows and tabs from last time ?

i have gone to tools, options, then under the general tab i set firefox to start up : I set show my windows and tabs from last time.
When i closed firefox and then started it again it didn't work.
What can be done to resolve this issue please?

Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

I have had a new hard drive installed. On start up I transferred all my settings and documents from my time capsule. Once complete I have two user accounts. Mine and guest. I cannot access either. Mine says password incorrect even though its not.

I have had a new hard drive installed. On start up I transferred all my settings and documents from my time capsule. Once complete I have two user accounts. Mine and guest. I cannot access either. Mine says password incorrect even though its not. Any idea what is wrong here and how I can reset my password. I don't have a start up disc. Thanks very much

From System Preferences/Help:
Reset your login password using your Apple ID
Before you can use your Apple ID to reset your login password, make sure that FileVault isn’t enabled on your computer.
Also make sure that an Apple ID is associated with your user account, and that an administrator has given you permission to reset your own password using an Apple ID. For more information, see this help topic:
Associate Apple IDs with your user account
Make sure your computer is connected to the Internet.
In the login window, click the question mark in the password field, and then click the arrow in the dialog that appears.
Enter an Apple ID and password, and then click Reset Password.
I don't know if it works.

What is wrong? The "show my windows and tabs from last time" has not been working these past two or three days. It was fine before. Ive changed nothing except the last update from you. Thank you.

What is wrong? The "show my windows and tabs from last time" has not been working these past two or three days. It was fine before. Ive changed nothing except the last update from you. Thank you.

Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Session_Restore
* http://kb.mozillazine.org/sessionstore.js
If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

ADF application taking more time for first time and less from second time

Similar Messages

Maybe you are looking for