ADF commit error

Hi,
oracle.jbo.JboException: JBO-28201: Post threshold limit reached.
Some entities yet to be posted.
I get this error sometimes when I delete a row from a view and then commit the transaction.
view.removeCurrentRow();
AppModule.getTransaction ().commit ();
I have optimistic locking

This error is reached when the post cycle could not complete. Are you 'adding' an entity into the transaction to post during the post cycle of entities during transaction commit?

Similar Messages

"Comm Error" message when connecting to car stereo

When connecting my 80G IPod to the port in my car, the IPod screen rolls horizontally, then says "OK to disconnect", and the stereo displays the "Comm Error" message. I was able to connect to the stereo before but don't know what happened to cause this. Re-setting the IPod did not resolve the problem. Has anyone else seen this? Please help!
5th Generation IPod Windows XP

I’ve got a 30gb ipod doing the same thing. I know it’s not the car as my friends nano works fine on it. Have you have any success?

ADF Mobile Error handling and redirect

I'm stuck on how to handle errors within my ADF Mobile application. My application consumes a number of web services and we have found we often get error messages when phone connections switch from wifi to 3g or lose connection altogether. These are errors such as SSL handshake failure, HTTP500 errors, and also errors where it can't display the binding eh "Unable to get value for the property due to invalid binding iterator" because a WS call has failed. From the little information I can find - and none of it specific to ADF Mobile, I think I need to write an error handler class which I set against ErrorHandlerClass in databinding.cpx - if that correct? Am I able to catch these errors using that method and if so has anyone got any examples at all. Ideally what I'd like to do when I've caught those errors is redirect to another page (showing something like facebooks app does when it loses a connection and says tap to try again), does anyone have any suggestions or examples?
thanks
lynsey

A sample for ADF Mobile Error Handling.
SDA013
Error Handling in ADF Mobile
https://java.net/projects/smuenchadf/pages/ADFMobile#SDA013

Epson Artisan 810 comm error

When scanning with the 810 from its control panel for "scan to email",as soon as I push on the scan to email via USB on the panel it gives a comm error and says to check if computer is connected.
This is the second 810 to do the same thing. Unistalled/reinstalled drivers, no luck. The scan from the computer to the scanner works OK without error but want to use the control panel for fast and easy scan to emails.
Tried different usb cable, same results.
Really am stumped. Epson tech blames IMAC software, Apple support says its in the all in one pntr/scanner. Epson says they have not heard of this problem before.
Am using new Snow Leopard on 1 year old computer

I have the same problem. Everything works fine, except that from the printer console, the only option for scan to Email/PDF/PC only gives the option for USB Connection (which is inconvenient for me to use). My MacBook Pro does not show up in the list like the photos in the instructions.
I tried installing "Drivers and Utilities Combo Package - Network" dated 1/04/10, from Epson's site, file epson13616.dmg, to no avail.
The Artisan 810 is connected by ethernet to my Time Capsule (internal network) and the MBP is connected by wireless to the same network. It will scan fine from the application on the Mac, but not from the unit's console. Really disappointing, since instead of putting something on the printer, and punching a couple buttons, you have to put it on there, go to the computer (on the other side of the room for me), pull up the software, scan, then go back to the printer to remove the item (or flip the page!)

RS232 Comms Error Indication

Hi all, new to the site so please forgive me for any question that seems obvious or child’s play Basically the problem I have is that sometimes I loose communication between my FieldPoint FP-1000 and LabView. When I say I loose comms, the Network and Access LED on the FP are still flashing away but all the values on the screen go to zero. It is not a set time when it will do this, it is random and ive only had it once where the values came back briefly then went again Ive checked the port using 'Hyperterminal' as described in the NI help section and the port appears OK. Also all Baud rates have been checked Does anybody know what the FP-1000 does if it has a comms error or does it even have that error code available to display? Its just strange that the port is ok and the network and access LED's appear to still be transmitting and the DAQ on LabView is still receiving messages so to me the FP seems ok?
Ive got a programme called Portmon on Cd which ive been advised to use to check the status of the port when it goes down, unless you have any sugegstions before I try it? Many thanks in advance, any ideas or suggestions are welcome and greatly appreciated Regards Mitch

Hi Mitch,
Please can you test the comms connection with some of the example programs shipped with LabVIEW. The ones I am thinking of are located in the LabVIEW Example Finder (Open LabVIEW goto Help >> Find Examples)
From the Example Finder go to Hardware I/O >> FieldPoint >> Getting Started >> Analog Input.vi
This will let you quickly and easily test the comms on the FieldPoint. It will also show you how to use the FP Read vi.
Regards
JamesC
NIUK and Ireland
It only takes a second to rate an answer

Comm error using iphone in Scion?

Hi,
Recently, my Scion xD stereo displays "comm error" when I attempt to play my iphone through it. I tried a new cord. No luck. I tried another iphone and it worked perfectly. So it looks like my phone is the culprit. Ideas?
Thanks in advance.

Hi Bastille521,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Some car stereos require a firmware update for AVRCP 1.4 Bluetooth compatibility
http://support.apple.com/kb/TS4483
I hope this information helps ....
Have a great day!
- Judy

Fax test shows passed but fax doesn't work comm error

new machine . fax test passed but when fax is trying to be sent comes back as comm error. help

Hi @farmerj15 ,
I see by your post that when you try to send a fax you are getting a comm error, the fax test all passed. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided a document to go through the steps to see if that will resolve the issue.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker if you are still having issues.
Please let me know the following:
Can you receive a fax?
What kind of line do you have? (Analogue, DSL, Cable Modem)
Where is the fax cable connected to? (modem, wall jack)
Are you using a filter?
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Cannot Receive faxes "result: comm error 232"

Device: LaserJet Pro 200color MFP M276mw
Product # CF145A
This fax is not connected to a computer. Just stands alone to its own dedicated fax line.
Will send faxes out, but cannot receive them. Error Message is always "Comm error 232"
I have tried turning off ECM to correct this problem, but error persists.
Have sent faxes out with no problem however, no luck in receiving from two different sources.

Hi @Vibe2J ,
I see that you are having issues receiving faxes and you are using a dedicated fax line. I would like to help you out today.
Run a fax test.
From the Home screen, touch the wrench button.
Touch the service button.
Touch the Fax service button.
Touch run fax test.
You should get 4 passes.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
Did the fax test pass?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using a filter?
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Comm. error while checking accnt assignment for invoice 8000338378 in syste

Hi all,
Comm. error while checking accnt assignment for invoice (8000338378) in system .
But every thing is good.but we are geting error list above error
Reagrds,
Srikanth

Hi Praveen and all,
Thanks for your replies.
I tried doing setting with VKOA and checked with
VF02, Environment-Account determination analysis.
--> it says account determination is found.
Then i clicked the Flag button(Release to accounting) in VF02.
It gives below error in status bar
<b>"only output tax is allowed for account 175000 JTC1, E0 is not allowed"</b>
How to go ahead or solve this error.
suggest me please.
regards
Ambichan

ADF: showing error message on a validation rule programatically

Jdeveloper : 11.1.2.2.0
i m using ADF. i ve a form that contains input text that is binded to a managed bean property.
that input text value is inserted into an entity attribute.the attribute in the entity has a validation rule.
i submit the form and in my managed bean i call
am.getDBTransaction().commit();
i want when i submit the form and the when the commit is called and throws exception regarding the validation rule,i want to show an error note window same style like this http://oi50.tinypic.com/15fhnpt.jpg
how can i do that ?
thanks in advance :)

Hi,
i submit the form and in my managed bean i call
am.getDBTransaction().commit();A strict NO NO for doing this. You add the commit action to the binding and call the execute the commit operation binding programatically.
i m using ADF.ADF is vast. Be specific on the technologies you use (ADF BC and ADF Faces?)
that input text value is inserted into an entity attribute.the attribute in the entity has a validation rule.Are you doing something special with the binding you have in bean? If not, why don't you Drag and Drop the VO from the data control directly? (set the af:messages tag to have inline=true).
-Arun

ADF 25001 Error

Hello everyone;
I'm still fairly new to Oracle and JDeveloper and this problem has me stumped.
I have a page with a table (ADF Read Only) called citymst on it. If a record is selected it takes the user to a page with a form ( ADF Form) called citymstedit. The problem is after a user updates any field in the form and hits "Commit", this error message appears:
State (or whatever field is being updated) JBO-25001: Name Citymst of object type Attribute already exists
I found a previous question like this but the solution given talks about finding a duplicate named AccessorAttributes in the xml file. I've looked everywhere and can't find any duplicates. This table was deleted at one point and has been recreated. There must be a way to locate this cause as changing tables in the size of operations I am doing is going to occur again. Thanks for any help or advice.
William

Hi,
lets try and take the client off the equation. Can you run the ADF BC tester for the AM and perform an update? If the same error message shows then we can look into the ADF BS model as the source of trouble
Frank

ADF Custom error handler not working.

Hi All,
i am using jdev version 11.1.1.5.0. i have created one custom error handler class in model layer which extend DcErrorHandlerImpl class.
and do the entry in Databinding.cpx file
*<Application ErrorHandlerClass="mypackage.classname"/>*
i have override getDisplayMessage(BindingContext ctx, Exception ex) method to show SQL Exception which comes from database table trigger.
code is following-
package com.in.jagran.view.services;
    import java.sql.SQLException;
    import oracle.adf.model.BindingContext;
    import oracle.adf.model.binding.DCErrorHandlerImpl;
    import oracle.jbo.JboException;
    public class AclasErrorHandler extends DCErrorHandlerImpl {
      public AclasErrorHandler(boolean setToThrow) {
        super(setToThrow);
        System.out.println("Inside Error Handler class");
      public AclasErrorHandler() {
          super(true);
       // this(true);
       * Returns the message that will be reported to JSF for each error that occurs.
       * Returning "null" is the way the custom error handler signals that a given exception
       * should not be reported to the client.
      @Override
      public String getDisplayMessage(BindingContext ctx, Exception ex)
        if (ex instanceof oracle.jbo.ValidationException) {
          return super.getDisplayMessage(ctx, ex);
        else {
          // Extract and return the error message that has to be displayed
          Exception exception = ex;
          String message = "";
          // If this exception is an instance of JboException,
          // try to find the cause by recursing over the eventual causing exceptions
          if (exception instanceof JboException)
            Throwable[] exceptionList = ((JboException)exception).getExceptions();
            while (exception instanceof JboException
                    && exceptionList != null && exceptionList.length > 0)
              exception = (Exception)exceptionList[0];
              if (exception instanceof JboException) {
                exceptionList = ((JboException)exception).getExceptions();
          // *** Special processing of SQLExceptions
          if (exception instanceof SQLException) {
            message = exception.getMessage();
            // Ignore the lines in the error message that indicate the line number in the PLSQL code that the error resulted on.
            int ind = message.indexOf("ORA-06512");
            if (ind > 0)
              message = message.substring(0, ind);
          // *** If the the reason for the JboException was data creation exception then display the message
          // of the top JboException (i.e. JBO-*****: Invalid numeric value, date format or time format)
          else if (exception instanceof NumberFormatException || exception instanceof IllegalArgumentException) {
            // Report the top exception
            message = ex.getMessage();
          // Otherwise report the message of the lowest exception in the hierarchy
          else {
            message = exception.getMessage();
          return message;
    }but it is not working for me.
thanks in Advance.

yes i have used dubugger.
i have set break point to following line-
return super.getDisplayMessage(ctx, ex);
if (ex instanceof oracle.jbo.ValidationException) {
        return super.getDisplayMessage(ctx, ex);
}when atttribute validation done like i have attribute of type number and i have done the validation "must be greater than 0" now when i have given negative value control go to above line.
and i have added following code also in handler class
        @Override
           public void reportException(DCBindingContainer dCBindingContainer,
                                       Exception exception) {
System.out.println(exception.getMessage());
                   super.reportException(dCBindingContainer, exception);
               }now when i have done commit operation control go to here and println statement print follwoing error on log window.
JBO-26041: Failed to post data to database during "Rollback to Savepoint": SQL Statement "null".

ADF DBSequence Error

Hi Friends!
I´m learning ADF with JDeveloper 11g release 1 and i have some problem with the DBSequence!
I have done a simple sample to test de ADF operations!
I used Fusion MiddleWare template to my application and i have used ADF Business Components From Tables based on a simple table with ID number PK and Description Varchar2 columns, to create a model and a view based on this simple table!
My table has a trigger that generate the value of the sequence!
I changed the type of ID attribute to DBSequence!
Then i created a simple jspx page based on a datasource from that simple view with the navigator and Commit and create buttons!
When i create a new record in my ID field the system puts a default value -2 and when i put a value to description and commit the operation i got a error: "Cannot convert String to DBSequence"!
If i open the source of the Entity Object i can see a atribute of the xml tag DefaultValue="@0" and if i delete this attribute from tag the system works well!
The problem is everywhere i change the type of the attribute to DBSequence this XML tag is add automaticly and i need to open the source to clean this field to my system works with dbsequence!
Is it a bug, or i´m diding some mistake in my sample?
Thkz for now!

I had the same problem. I writed in the page .jsff the text:
<af:convertNumber groupingUsed="false" pattern="#{bindings.Peid.format}"/>
That is the first part of the file:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:panelFormLayout id="pfl1">
<af:inputText value="#{bindings.Peid.inputValue}" label="Codigo:"
required="#{bindings.Peid.hints.mandatory}"
columns="#{bindings.Peid.hints.displayWidth}"
maximumLength="#{bindings.Peid.hints.precision}"
shortDesc="#{bindings.Peid.hints.tooltip}" id="it6">
<f:validator binding="#{bindings.Peid.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.Peid.format}"/>
</af:inputText>
Edited by: fmoncada on 15-oct-2009 18:59

ADF 11g:Error When running login page: ADF security

I am using Jdeveloper 11.1.1.2.0.Based on the following post
http://blogs.oracle.com/fusionmiddlewarereallife/adf11gsecurity.html when I am running the application I am getting following error in web browser:-
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.4 403 Forbidden+
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Steps to reproduce the error:-
1) Unzip the lession6.zip file (http://blogs.oracle.com/fusionmiddlewarereallife/Lesson6.zip)
2) Open application in your Jdeveloper and run the login.html page.
3) In the login page,give user id as "James" and password as "welcome1"
4) You will see above error.
I have tested the above in Firefox 3.6.3 and IE7.*Please note that when you run the PublicPage.jspx, application works fine*. Its not working in the case when you are running the application using login.html
I have checked the Adnrejus post on this error(http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html), but weblogic.xml is generated with required entries.
Can anyone help me in this please:-
Thanks,
Vikram

Me too have tested the application by running the public page. Its working fine.
But my hole point here is, why application is not moving to the PrivatePage.jspx from login page. Means why can't we directly run the login page and access the PrivatePage. Even when success_url is configured in web.xml
<servlet>
<servlet-name>adfAuthentication</servlet-name>
<servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
<init-param>
<param-name>success_url</param-name>
<param-value>/faces/PrivatePage.jspx</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
Thanks again,
Vikram

How do I change the language of ADF framework error messages?

I'm a beginner in ADF and JDeveloper and I tried to run one of the tutorials for ADF (Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces).
While clicking through the application I got errors like this one:
ADF_FACES-60097:Pentru mai multe informaţii, consultaţi jurnalul de erori al serverului, pt. o intrare care începe cu: ADF_FACES-60096:Excepţie server în cursul PPR, nr. 1
My question is how do I set the JDeveloper/WebLogic to show these messages in English (in order to have better chances while searching this forum :) )?
I'm not talking about messages that I define in my application, but about framework error messages.
I already set USER_LANGUAGE=en in <JDEV_HOME>\.product.properties, but no luck.
Note that WebLogic server messages are in English (e.g. <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HR_EJB_JPA_App is not versioned.>), only ADF messages are presented in Romanian.
Thanks,
Bogdan

I suspect that these messages are considered "system" ones (e.g. not for the user), so they are not generated in the user's locale but in the JVM's default locale. On Windows machines default JVM locale is taken from Windows Regional Settings. If you do not want to change your Regional Settings, you can try Java system properties "user.language" and "user.country". Try to add the following line to WebLogic domain's <tt>setDomainEnv.cmd</tt> script:
set JAVA_OPTIONS=%JAVA_OPTIONS% -Duser.language=en -Duser.country=USA restrart of the server is required.
In Bulgaria we do not have such problems because ADF Faces messages do not have Bulgarian translation, so they are generated in English regardless of the fact that our Regional Settings are set to Bulgarian.
Dimitar
Edited by: Dimitar Dimitrov on May 3, 2011 7:40 PM

ADF commit error

Similar Messages

Maybe you are looking for