ADF Custom properties overlay

Hi all
I want to put another one data in the same row in view mode in priview link http://tinypic.com/r/10e22wn/6 can see that in Edit form are showing both (Code & Date fields), but on View Form are only date in Custom properties i tried to RoDisplay: IllnessDate ,Code but then in view form showed only Code
Maybe someone can give some tips about overlay or how i can put the Code into view form in the same row
Jdeveloper-11.1.1.6.0
ADF Business Components 11.1.1.61.92
Thanks ! !
ID
Edited by: 1D10T on Nov 7, 2012 4:47 AM

Sucess
<CustomProperties>
<Property
Name="ShowCodeInRO"
Value="true"/>
</CustomProperties>
Maybe somewhere are some list with all custom Properties ?

Similar Messages

Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications

I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
exist on the consumer farm, but not the new custom properties I recently added.
1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
2. The User Profile Service proxy (connected to the publishing farm UPS application) is associated with all the web applications on the consumer farm.
3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
However, I cannot find any other related information on the web, nor from the ULS logs.

Hi,
As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
In the IIS, it is the topology, check if it starts.
2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
1. Go to Central Administration and going to “Manage Service Applications”.
2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
Your farm GUID should be listed with full permissions.
The article is about Shared Service Architecture in a multi farm environment
http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
Best regards
Sara Fan
TechNet Community Support

Retrieving empty values from multi value string in user profile custom properties

Hi,
I created a webpart to save and retrieve data from custom properties. I use the code below to get the stored data:
for (int i = 0; i < profile[property].Count; i++)
Item = profile[property][i] == null ? string.Empty : profile[property][i].ToString();
list.Add(Regex.Split(Item, @"\,\#"));
Nothinig special about it.
In my development environment, it works fine. The problem is in my UAT environment. I'm facing an issue that i hope someone has been through. When the custom property is a multi value string type, it returns a empty string. I tested with HTML and single
value fields and it works fine.
Independently of the field type, it saves the data all right.
Can anyone help me?
Thanks!!

Thanks, Chitvan Jain.
I did as you suggested, but nothing changed. The problem is that profile[propname] comes already blank when using multi value property, even if there is data to be retrieved.
One funny thing is that, somehow the code manages to count the number of values there is in the property. Only the data is missing. We can see the exact number of column, cause i check if there's the right number of data, if there isn't, i add up a empty
string on the grid cell, but only for viewing. The empty string is not stored in the property.

How to set buildID.xml and custom.properties in SDK

Hello,
I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
Within the sap note 1484551, you mentioned we need change the
SDKInstallDir/build/buildID.xml file, here is the context of the file:
buildID.xml -
<?xml version="1.0" encoding="UTF-8"?>
<buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
<customer>XXXXXX</customer>
<revision>1.0.0.0</revision>
<build>1</build>
</buildID>
buildID.xml -
1. how can we change the revision and build?
There is another file BuildToolDir/build/script/custom.properties, here
is the file context:
custom.properties----
This file contains build properties used to configure the build
system.
The name of the software vendor implementing the customizations.
vendor.name=xxxxxxxxx
Vendor build identifier. This value is used to uniquely identify
customizations built by a particular vendor for a particular customer
and base
application version.
This is also used in path locations and in naming certain build
artifacts, like the custom EJB module and the utility classes archive.
vendor.id=xxxxxxxxx
The installation of the J2EE engine installed in the development
environment.
ex. C:/usr/sap/CE1\J00
j2ee.instance.dir=J2EEInstanceDir
The web context path used to access the main web application. This
is used by the build to set the
context-root value in application.xml after an update has been
imported.
web.context.path=
The web context path used to access the production XML interface web
application. This is used by the build to set the
context-root value in application.xml after an update has been
imported.
xml.context.path=
The web context path to access resources from the web extension
application, like images and work instruction HTML files.
web-ext.context.path=web-ext
The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
The JDBC driver configured for the application server.
db.drivername=VMJDBC
JDBC connection propertes for the WIP (Work In Process) database.
This is the primary application database.
db.wip.driverclassname=
db.wip.driver.url=
db.wip.host=
db.wip.port=
db.wip.sid=
db.wip.user=
db.wip.password=
JDBC connection propertes for the ODS (Open Data Store) database.
This is the offline reporting and archiving database.
db.ods.driverclassname=
db.ods.driver.url=
db.ods.host=
db.ods.port=
db.ods.sid=
db.ods.user=
db.ods.password=
Flag indicating whether to add DPMO NC codes to NC idat files when a
new update is imported. This value is initially
set by the installer according the the user selection.
dpmo.nc.codes=
The default locale used by the production system. The default locale
is the locale used to display locale
specific text and messages when the requested locale is not
available. This property does not need to
be set if the default locale is english.
default.locale=en
Used when running the build from Eclipse to locate the java compiler
used by the WebLogic EJB compiler.
jdk.home=C:/Program Files/Java/jdk1.5.0_20
Compiler debug mode. If set to 'true', debug symbols will be
compiled into the byte code.
compile.debug=true
Keystore alias
security.alias=xxxxx
Keystore password
security.storepass=ChangeIt
Key password
security.keypass=ChangeIt
Keystore type (jks=default,jceks,pkcs12)
security.storetype=jks
Optional source control build identifier that is to be displayed with
standard version information.
scs.build.ID=
Optional extended version information to be displayed with standard
version information.
ext.info=
custom.properties----
2. How can we change this here?
Regards,
Leon Lu
Edited by: Leon Lu on Aug 4, 2011 11:14 AM
Edited by: Leon Lu on Aug 4, 2011 11:21 AM

Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan

Custom properties added by EWS not visible in Outlook

Hi all
I'm a first-time Exchange and Outlook addin developer and I'm stuck on a problem.
I'm working on a project where we use an Outlook 2003 addin that tags items; mail, appointments and tasks
with custom properties.
In Outlook we do this by adding the data as UserProperties.
After the items have been saved an onsave eventSink triggers on the Exchange 2007 mailbox server and using CDOEX, checks for the tags, collects some data and sends them to an web service wich stores the data on an AX server.
This works fine.
Then we want the AX server to be able to update and create new items back against exchange, and for this we use Exchange Web Services.
I've made an application that performs the operations agains EWS, and everything works smoothly except when we add the custom properties.
We add them as extendedproperties with the following code:
ExtendedPropertyType extendedProperty = new ExtendedPropertyType();
extendedProperty.ExtendedFieldURI = new PathToExtendedFieldType();
extendedProperty.ExtendedFieldURI.DistinguishedPropertySetId = DistinguishedPropertySetType.PublicStrings;
extendedProperty.ExtendedFieldURI.DistinguishedPropertySetIdSpecified = true;
extendedProperty.ExtendedFieldURI.PropertyName = propertyName;
extendedProperty.ExtendedFieldURI.PropertyType = MapiPropertyTypeType.String;
extendedProperty.Item = propertyValue;
This worked well for the eventSink, we found the fields and got the values just like we did for items tagged by the Outlook addin.
However, the Outlook Addin could not find them in the UserProperties object for the item, and Using Outlookspy I could plainly see that they were not present.
After a bunch of searching I found a thread on this forum that discussed adding custom properties as ExtendedPropertyTypes via EWS using a guid as a PropertySetType.
Here it is: http://forums.microsoft.com/technet/showpost.aspx?postid=1764780&siteid=17
I followed the instructions here, and now both the eventSink and Outlook are unable to find the properties.
My question is:
How can I apply my tags so both my Outlook addin and EWS can create, update and read them, as well as allowing the eventSink to easily read them?
The simplest way, I imagine, is if I could make Exchange Web Services place the properties in the "UserProperties" object.
I would greatly appreciate any help.
thanks
Ragnar Fatland

I first created an extended property:
ExtendedPropertyDefinitionepdGuid =
newExtendedPropertyDefinition(
DefaultExtendedPropertySet.PublicStrings,
"Guid",
MapiPropertyType.String);
Then I setup the service:
ExchangeServiceservice =
newExchangeService(ExchangeVersion.Exchange2010_SP2);
Find all the items:
FindItemsResults<Item>
userItems = service.FindItems(newFolderId(WellKnownFolderName.Inbox,
userMailbox),
newItemView(int.MaxValue,
0)
PropertySet =
newPropertySet(BasePropertySet.FirstClassProperties,
epdGuid)
Loop through the userItems:
foreach(varitem
inuserItems)
if(item
isEmailMessage)
EmailMessagemessage = item
asEmailMessage;
Do a message load with the PropertySet (if you don't do the PropertySet you won't see any extended properties):
message.Load(
newPropertySet(epdGuid));
Then you can loop through the extended properties:
foreach(varextendedProperty
inmessage.ExtendedProperties)
if(extendedProperty.PropertyDefinition.Name
== "Guid")

How to invoke ADF custom application from existing R12 EBS application

Hi Guru's,
We have a requirement to invoke ADF custom application from existing EBS R12.1.3 application.
Is there any documentation provided by ORACLE or any online help on how to integrate/invoke ADF pages from existing EBS application?
And can we pass any EBS session level parameters like(user info, language, operating unit etc) to ADF layer while invoking the ADF application?
I have thoroughly searched the forums and got some info related to JAAS security links and all. but i am looking for exact integration specific steps.
Any help in this regard is a great help!!
Thanks alot for your help!!
Subba.

lets raise your question over here
JDeveloper and ADF
Thanks
vamshi.

Add custom properties to People Search Results

Good morning,
I am trying to include some custom properties to our Search Results. These are the steps I have followed so far:
Create User Profile Service Property and sync to AD. The property is populated for different users.
Run full crawl
Create managed property on the Schema, and map this to the crawled property
Created a new version of the Item_Person.html template and changed its title.
Upload to the Display Templates gallery, and created a new Result Type with this as its template
Added the new property to the mso:ManagedPropertyMapping tag
Went to Search Result Types, and selected "Update" on the Property Sync alert
On the new template, the new property appears on the object ctx.CurrentItem, but its value is null.
Am I missing something? Tried running full crawl and incremental crawl. Even tried removing the index first.

Hi,
Please try to add custom properties using Central Admin.
I find a thread with the same question, check this:
http://sharepoint.stackexchange.com/questions/123090/add-custom-properties-to-people-search-results
More information:
http://blogs.technet.com/b/tothesharepoint/archive/2013/09/11/how-to-display-values-from-custom-managed-properties-in-search-results-option-1.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to access custom properties on JavaBean DC attributes

I created a DC from a Java class and defined some custom properties on one of its attributes. How can I access these custom properties through EL? I don't see the custom properties in the Expression Builder.

Hey Frank
Sorry for the sparse description. By custom properties I mean the ones you can add through the "Custom Properties" tab in the same editor that also lets you edit the UI Hints. This is the editor that opens when you try to edit an accessor on a data control from the DataControls.dcx viewer. In my case, I have a TestDC data control that exposes an "employees" collection of type Employee. Employee has the attributes "startDate", "name", and "age" which are of type java.util.Date, java.lang.String, and java.lang.Integer, respectively. In the DataControls editor, I select the "employees" accessor and click on the pencil icon. This opens the editor for the Employee.xml file (root element is PDefViewObject, always appears in a persdef package). From the Overview, click on Attributes, and you'll see the Custom Properties tab below the list of attributes. I added some properties here for one of the attributes but I don't know how these are supposed to be accessed through EL.
Here are two screenshots in case my written description sounds confusing.
http://imgur.com/F6XSLgl
http://imgur.com/oHWIdCA

Combo box in "Filter by Custom Properties"

Hi to all,
I create some custom metadata properties properties in order to classifie the documents in KM.
This metadata properties has a set of Allowed Values, so the value is selectable with a combo-box in Detail box of KM.
Now I have to enable the Filter by Custom Properties with the combobox in place of textfields.
How to do?
Regards,
Giampaolo

What you want is not the Filter by Custom Properties but the Filter by Predefined Properties.
In you search options configuration add your properties to the predefined properties list and you'll get your combo-box.
To configure your search options go to:
System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Options Set

Create custom properties in folder in KM

Hi to all,
In KM I have created a folder and now I need to create a custom field in setting - properties in this folder.
I go to System Administration - System configuration - Knowledge Management - Content management.
Now i go to Configuration - Component Management - Global service and I have created a Namespace, a Group and Properties.
I think that if I go to the Content administrator - KM content - go to my folder - Details - Settings - Properties, I should see the custom field but I don't see it.
Can anybody helps me?
Thanks a lot.

I have similar problem with custom properties for UME. I have added a property userdesig. I can see them in myprofile and user management in a separate tab 'Customized information'. I can also save data in this property.
The problem is when I go to 'Content administrator - KM content - go to my folder - Details - Settings - Properties' I am unable to see the Custom Field.
Would appreciate any help.
Thanks
JPM
Edited by: JOSEPH MILTON on May 16, 2009 2:26 PM
Edited by: JOSEPH MILTON on May 16, 2009 2:27 PM

How to set Custom Properties in PDF

Hi,
We are using BIP embedded in EBS R12.
For post-processing of PDF files, we need to embed information in PDF files which can be read by a script.
There is Customer Properties section in every PDF file (File > Properties > Custom (tab)) where information may be stored in Name-Value pair where in Name will be a predefined information while value should coming from XML data file.
I could not find any help/guide which demonstrates how to insert custome properties in PDF file generated from RTF template in EBS. Is this capability available in BIP?
Please share your thoughts on this.
br.

You may be able to make changes to the web.xml for Infoview to handle that.
For infoview questions you will need to create a forum post in the [Enterprise Admin forum|BI Platform;
Edited by: Jason Everly on Aug 16, 2010 10:01 AM

Displaying Customized Properties in Document Properties

We have set-up a crawler, documentum, to map certain documentum properties into new customized properties within a new content type we created. Everything appears to work but when I view the document's properties through the knowledge directory only 6 Customized properties appear to be listed, Author; Category; Created; Doc Title; Subject & URL, none of which are the ones I want.
Is there a way of extending the list of properties shown or does ALUI only show properties which have values, in which case my mapping is failing?
We are running ALUI 6
Many thanks,
Ross Ellard

Sorted this out. Was not looking in the right place and had misread naming convention to use for documentum.
Ross

Unable to retreive custom properties for WPC pages in TREX search result

Hi All,
We have created couple of custom properties "custom_news_heading" and "custom_news_abstract" which are indexable and made it available for all folders and documents.
In web pages folder in one of the WPC web site we have created few pages. In details screen for those pages we have updated those custom propeties with some text.
We have created an Index out of that web pages folder and able to see indexed count as same as the pages inside the web pages folder.
For that index the "Display Index Details" screen in TREX monitor is not showing up the custom properties - means TREX is not considering those custom properties even if have flagged it as Indexable.
Search result is returning the properties like "display name", contentlength etc. But we are not able to reterive the custom properties by customizing the Collection Renderer's Diaplayed properties.
Any advice please?
Thanks

Hi Dhaya/Scotts,
Please upload an image of ur layout setting and also the collection renderer in the
[Wiki|https://wiki.sdn.sap.com/wiki/x/IACnB] page that I have created for this thread...
Regards
BP

What is the use of custom properties for terms in term store management of SharePoint 2013

Hi All,
Can some one pls explain what is the purpose of custom properties for terms in term store management tool of SharePoint 2013.
In general, for each term we have shared and local properties. What is the real purpose in terms of SharePoint development.
Please share with possible scenarios. Does it refer's to a hierarchical metadata in SharePoint ?
Thanks keshav,Share point Developer

The custom properties for terms allow you to further define or clarify a term via the properties. You can then display these properties in search results or specify query rules that look for specific custom properties.
Here is an example of how to create a query rule using custom properties:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a8b53ffe-869e-4c86-8c43-d239370ee7d5/custom-properties-of-the-managed-metadata-service?forum=sharepointgeneral
Here is an example that uses code to verify that a custom property exists on a term object that is pinned to another term object:
http://msdn.microsoft.com/en-us/library/jj163273.aspx#SP15_H2UseCodeToPinTerms_CodeVerifyCustomProperty
Doug Hemminger http://www.sharepointdoug.com

Adding an Attribute to a VO changes the custom properties of the existing

Adding an Attribute to a VO changes the custom properties of the existing attributes of the VO.
We had a requirement to add an extra column in the VO.
We modified the underlying EO to include the new column from the table, and modified the VO as well.
Jdeveloper was changing the custom properties of the existing attributes in the VO. Our fix was not working as expected.
Could anyone please inform us:
1. On what logic does Jdeveloper determine to modify the existing custom properties of other VO attributes.
2. Can this behavior of Jdeveloper be controlled through any mechanism.
Thanks in advance,
Rahul.

Hi,
which version of JDeveloper and how to reproduce ?
Frank

ADF Custom properties overlay

Similar Messages

Maybe you are looking for