ADF Date Validation

Hi,
What is the easiest Date validation at UI
eg.
DATE2 must be less than DATE1.
I can write in Value Change Listener and raise error. However is there any simple or smarter way to achive this at Validator or using Reg Expr ?
Thanks,
Kiran

Hi,
Try using JavaScript
http://stackoverflow.com/questions/6135433/javascript-check-end-date-is-greater-than-or-equal-to-start-date
http://www.webdeveloper.com/forum/showthread.php?61259-compare-dates-in-Javascript-Urgent

Similar Messages

Need to make date validation to remove overlab

I have a problem in date validation
I will tell you the scenario
I have department table as a master table and under this department there is some teachers.
Eeach teacher have Start Hiring Date and End Hiring Date .
I want to prevent to insert a new teacher with Start Hiring date or End hiring date between any period inserted before in this department .
This means in any period there is only one hired teacher
how can I do this validation

Assumed that you are using ADF BC, I reproduced your use case, and tried this. you can also try it,
    CREATE TABLE test_department
    (      id      numeric(10)      not null,
         name      varchar2(50) not null,
         CONSTRAINT dpt_pk PRIMARY KEY (id)
    CREATE TABLE teachers
    (      id      numeric(10) PRIMARY KEY     ,
         dept_id      numeric(10)      not null,
          start_date date,
          end_date date,
         CONSTRAINT fk_emp FOREIGN KEY (dept_id)
           REFERENCES test_department(id)
insert into test_department values (1,'Math');
insert into teachers values(1,1,to_date('1/1/2010','DD/MM/YYYY'),to_date('31/12/2010','DD/MM/YYYY'));add a validate entity method to you TeacherImpl class.
    public boolean validateTeachers()
        TestDepartmentImpl deptImpl = this.getTestDepartment(); // TestDepartment is the accessor name exposed in TeachersImpl class
        RowIterator iter = deptImpl.getTeachers(); //Teachers is the accessor name exposed in DepartmentImpl class
        boolean flag = true;
        while (iter.hasNext())
                TeachersImpl currentTeacher = (TeachersImpl)iter.next();
                if (!currentTeacher.getId().equals(this.getId())) //skip the current teacher from comparison
                    if (this.getStartDate().compareTo(currentTeacher.getStartDate()) >
                        0 && this.getEndDate().compareTo(currentTeacher.getEndDate())<0)
                          flag=false;
        return flag;
    }

Date validation via minValue in UI

Hi,
I am new in ADF so looking for some help.
I have 2 inputDate in UI with behavior startDate and endDate.
I am validating the date value with minValue property on endDate, like endDate should not be less than startDate.
It is working fine and behaving in expected manner except one scenario.
Here is some problem with refreshing the error message -
1. after entering startDate larger than endDate, it is giving error in endDate which is fine(startDate=25-Jun-2011 EndDate=20-Jun-2011, Error:The date is before the valid range.The date must be on or after 25-Jun-2011)
2. I modified startDate with lesser value but it is still giving with same error message on endDate(modified startDate=15-Jun2011, still getting same error with old value "Error:The date is before the valid range.The date must be on or after 25-Jun-2011") .
3. When I modify endDate at that time is working fine.
Please let me know if there is any way to handle the situation in .JSFF file itself.
Thanks,
Naveen
Edited by: user12455197 on May 20, 2012 5:27 AM

Hi Timo,
Thanks for your time, I am using JDEV version : 11.1.1.6.0
Bellow is the code snippet, I tried with partial trigger and autosubmit=true as well, It is resolving my issue but at that time it is giving error "endDate can not by empty" due to autoSubmit=true when first time I am entering the value for startDate since both are mandatory filed.
<af:inputDate label="#{AttrBundle['ColAttr.PeriodStartDate.CompletedTrainingJobStartDate.TrainingParamsVO.ATTRIBUTE2']}"
required="true"
binding="#{backing_CreateTrainingJob.startDate}"
id="inputDate1">
<af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
</af:inputDate>
<af:inputDate label="#{AttrBundle['ColAttr.PeriodEndDate.CompletedTrainingJobUserSpecif.CompletedEngineJObVO.SettingsEndDate']}"
required="true"
binding="#{backing_CreateTrainingJob.endDate}"
minValue="#{backing_CreateTrainingJob.startDate.value}"<-------------------------------------------------------------------(Date validation)
id="inputDate2">
<af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
</af:inputDate>

The timesheet creation failed, because of problems with the project I server or with data validation

Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.

I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book

Excise Invoice Cancellation on Date validation only

Hi Experts,
i am having critical requirement from Business, which is not available in SAP Standard, So i need help from you guys...
Excise invoice can be cancelled on the same day of system/posting date. but when the system date and posting dates are not matching it should through error..
Example : i created Excise invoice on 17th june,2011 this is posting date of excise invoice, if i try to cancell on 17th june , it should allow.
                    but when i try to cancell the excise invoice on 18th june (system date) , it should not allow to cancell and it say Error !!!
i heard there will be possible through User Exit OR Function Module OR Routins ... Please help me
Thanks and Regards
Madhu

Dear Madhusudhanan,
Following are the list of User Exits available for J1IIN
J_1I7_USEREXIT_EXCISE_BEF_SAVE User exit after the excise header and details are written and they can changed in J1IS , J1IIN and Automatic creation of Excise Invoice.
J_1I7_USEREXIT_EXINV_ADDL_DATA User exit for Excise Invoice Additional Data    in J1IS and J1IG
J_1I7_USEREXIT_J1I5_MATFORM    User exit for J1I5 material form changes
J_1I7_USEREXIT_J1I5_VALIDATE   User exit for subsequent J1I5 data validation
J_1I7_USEREXIT_J1IEX_BEF_SAVE User exit for J1IEX before the data is saved
J_1I7_USEREXIT_J1IEX_CHANGE    User exit for changing data before display
J_1I7_USEREXIT_J1IS_BASE_VALUE User exit to Change base value in J1IS
I strongly believe that the first exit will serve the purpose.
Now if you are cancelling it using J1IH, Check the following thread.
J1IH-User Exit
Thanks & Regards,
Hegal K Charles

Data Validation - a feature that Numbers really needs.

Right now, the newly purchased Numbers app for iPad/iPhone is little more than a crippled document viewer for me because numbers doesn't support 'data validation' (as implemented in excel).
Its not a hard concept and likely utilized in a LOT of spreadsheets on the planet. Not supporting such a critical feature is a problem, as it makes numbers, at least for me, rather pointless as an authoring tool since I cannot change or update data in my worksheet without likely corrupting the document's data integrity.
Hopefully, someone at Apple is working on fixing this.
Given that one cannot use data validation - how do I lock down a spreadsheet so I don't accidentally change cell contents?
The fact that there is no 'undo' button on the iPhone version that I do get on the iPad (same app) makes it worse.. I'm occasionally and unintentionally dragging selections of stuff around the page really hosing up the iPhone spreadsheet.
So I need to just remember what needs to be updated, update the excel spreadsheet when I can, then delete the iWork-iCloud doc, upload the replacement, then refresh the iPhone/iPad version.. very cumbersome and not at all 'cloud-like' or usefull.
Apple developers.. are you paying attention?

Yeah I know that apple likely has the same system as Microsoft in sending general support to a forum such as this. And maybe thae same stupid moron that not paying attention to the forums if their users is a food idea.
That doesn't change the point of the issue nor that apple directs ,e here to ask said question
Written in the iPad split soft keypad that covers up the forum post I'm typing. Joy

Date validation

Hi ,
I have a created an textbox with date picker as (dd-mon-yyyy) .
Now i want to create a validation on it for the format (dd-mon-yyyy) .
I have created a pl/sql code with type "function returning error text".
Begin
If :P4_END_DATE IS NOT NULL THEN
if :P4_END_DATE <> to_date(:P4_END_DATE ,'DD-MON-YYYY') then
return 'END DATE should be in "DD-MON-YYYY" Format';
end if;
END IF;
End;
When i type in like 20-NOV-08 it gives error as 'START DATE should be in "DD-MON-YYYY" Format',
but when i change month like 20-11-2008 , it actually gives error
ORA-01843: not a valid month
Error ERR-1024 Unable to run "function body returning text" validation.

Hello,
You have duplicated this post, see my answer here -
Re: Date validation in "DD-MON-YYYY" Format,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Date validation in " DD-MON-YYYY"

Hi ,
I have created a textbox with date picker as (dd-mon-yyyy) .
Now i want to create a validation on it for the format (dd-mon-yyyy) .
I have created a pl/sql code with type "function returning error text".
Begin
If :P4_END_DATE IS NOT NULL THEN
if :P4_END_DATE != to_date(:P4_END_DATE ,'DD-MON-YYYY') then
return 'END DATE should be in "DD-MON-YYYY" Format';
end if;
END IF;
End;
When i type in like 20-NOV-08 it gives error as 'START DATE should be in "DD-MON-YYYY" Format',
but when i change month like 20-11-2008 , it actually gives error
ORA-01843: not a valid month
Error ERR-1024 Unable to run "function body returning text" validation.
Edited by: Vaibss on Nov 25, 2008 2:09 AM
Edited by: Vaibss on Nov 25, 2008 2:10 AM

Hello,
Duplicate post -
Date validation in "DD-MON-YYYY" Format,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Could not find "ADF Data Controls" in ADF tutorial 10.1.3.1.0 chapter 2

Hi
I am currently learning Oracle ADF followed by 10.1.3.1.0 tutorial. ( September 2006 Revision ), I installed Oracle Jdeveloper 10.1.3.2.0 on my pc with remote 10.2.0.2 database connection.
In the manual page 2-17, the final step of that chapter, it requests to create ADF data controls associated with SRPublicFacadeBean.java . It says, right-click the SRPublicFacadeBean.java node and choose "Create Data Control" from the context menu. However, I could not find such option in the context menu. Does anyone know why that happened.
Thanks ahead
Sean
Edited by: ma_sean on Oct 8, 2008 4:14 PM

Did you install the J2EE edition of JDeveloper or the Studio edition?
You need the studio edition to be able to create data controls.

Binding ADF data form fields with column of a table

Hii All,
I want to create ADF data form where fields will be in form according to the request parameter of a webservice and all that elemments should be bounded to a table .can any one please tell me how to do that in ADF .I have created the webservie and also able to access it from ADF page ,plz tell me how to configure it so that it will bind it's data with table.
with regards,
Deekay.

Create a WS data control using the WSDL you have.

Issue with data Validation while migrating from one application to another

Hi All,
I am having a strange issue Kindly please help me .
I have a data form which have data validation on each cell.The dataform is quite large and contain data for 4 accounts and year (Jan to Dec) combination .The issue is that I when I migrate this data form to other application which is just the replica of the main application. The validation on each cells changes its reference points.
I have 5 more similar data form and I need to migrate then to other application and also on production sever. Is there any way that while exporting and importing them using formutil.cmd or other way that the validation cells reference does not change its reference point.
For ex I have validation on Cell A5,A6..........AA6 after migrating it changes to A1,A1.........AA1.
I am using 11.1.2.1.0 version of Hyperion Planning
Kindly please help.
Thanks in advance
Vikash
Edited by: user11391767 on Nov 30, 2011 10:47 AM

Hi Mehmet,
I tried using the FormDefUtil.cmd .But by using this the reference points of validation changes to first cell when imported.
Thanks
Vikash

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Data validation for Date Field in Web Dynpro ABAP

Hi ,
In my WDA i want to perform data validation for date filed. (i.e. While creating a new record i have to check the Start Date should be always lesser than End Date.)
If u ll enter the wrong date it should validate the Date and throw an error message.
Please Reply soon its urgent.
Thanks,
Deepika

Hi,
First read the two attributes start date and end date.
Then write the following condition.
IF item_start_date > item_end_date.
Error message.
Endif.
For pop up error message you need to use Create_window method of the Interface if_wd_window.
Thanks.

How to do a date validation with leap years

I'm doing a date validation program in my Java class, and well it's pretty hard (for me that is). I have to be able to type in a date, have it say whether it's a leap year or not, and print out the number of days in the month. It seems pretty straight forward, but I get confused on trying to do the 'if else' statements and even the simplest things like getting the day prompting to work. >< The years I'm doing only goes through 1000 to 1999, so that's why those numbers are there. The program isn't complete, so if anyone could help show me what I'm doing wrong in the areas I'm working on then I'd appreciate it...and I'm still kind of in the basics of Java so if you do hint me with some code then I'd appreciate it if it was stuff that's not too advanced so yea.
// Dates.java
// Determine whether a 2nd-millenium date entered by the user
// is valid
import java.util.Scanner;
public class Dates
public static void main(String[] args)
int month, day, year; //date read in from user
int daysInMonth; //number of days in month read in
boolean monthValid, yearValid, dayValid; //true if input from user is valid
boolean leapYear; //true if user's year is a leap year
Scanner scan = new Scanner(System.in);
//Get integer month, day, and year from user
System.out.print("Type in the month: " );
          month = scan.nextInt();
System.out.print("Type in the day: " );
          day = scan.nextInt();
System.out.print("Type in the year: " );
          year = scan.nextInt();
//Check to see if month is valid
if (month >= 1)
month = month;
else
if (month <= 12)
month = month;
else;
//Check to see if year is valid
if (year >= 1000)
year = year;
else
if (year <= 1999)
year = year;
else;
//Determine whether it's a leap year
//Determine number of days in month
if (year == 1 || 3 || 5 || 7 || 8 || 10 || 12)
     System.out.println (Number of days in month is 31);
     else (year == 4 || 6 || 9 || 11)
     System.out.println (Number of days in month is 30);
//User number of days in month to check to see if day is valid
//Determine whether date is valid and print appropriate message
// Dates.java
// Determine whether a 2nd-millenium date entered by the user
// is valid
import java.util.Scanner;
public class Dates
public static void main(String[] args)
int month, day, year; //date read in from user
int daysInMonth; //number of days in month read in
boolean monthValid, yearValid, dayValid; //true if input from user is valid
boolean leapYear; //true if user's year is a leap year
Scanner scan = new Scanner(System.in);
//Get integer month, day, and year from user
System.out.print("Type in the month: " );
          month = scan.nextInt();
System.out.print("Type in the day: " );
          day = scan.nextInt();
System.out.print("Type in the year: " );
          year = scan.nextInt();
//Check to see if month is valid
if (month >= 1)
month = month;
else
if (month <= 12)
month = month;
else;
//Check to see if year is valid
if (year >= 1000)
year = year;
else
if (year <= 1999)
year = year;
else;
//Determine whether it's a leap year
//Determine number of days in month
if (year == 1 || 3 || 5 || 7 || 8 || 10 || 12)
     System.out.println (Number of days in month is 31);
     else (year == 4 || 6 || 9 || 11)
     System.out.println (Number of days in month is 30);
//User number of days in month to check to see if day is valid
//Determine whether date is valid and print appropriate message
}

Here are some helpfull hints for you:
1. Your code is really hard to read, there are two main reasons for this. First, your indentation sucks. Second, you seem to be fascinated with saving two (ok four if you count the shift key) keypresses to avoid using { and }.
2. Not using the brackets (you know { and } which you like to avoid) also is causing your code to do some stuff you don't realize or want to happen, or at least it would be if your code compiled.
3. If statements require arguements, "year == 1" is an arguement, "3" is not an arguement. Each operator like the or operator ("||") is essentially a new if and requires a complete arguement. So the following code peice:
if (year == 1 || 3 || 5 || 7 || 8 || 10 || 12)Literally translates to if year equals 1 or if 3 or if 5 or if 7 or if 8 or if 10 or if 12. Doesn't make much sense in english, and it doesn't make much sense in Java either.
4. I am pretty sure "year" is not the variable you want in the code snippet above (the one used in hint 3), especially considering years 1, 3, 5, 7, 8, 10, and 12 are not between 1000 and 1999. You need to be really carefull not make these kind of mistakes when coding, because they are by far the hardest to track down and fix later since they don't really throw up any flags or anything at compile or run time. Take your time and think thuroughly about each line of code while coding it, it will save you tons of time in the long run.
5. What exactly do you expect statements like "month = month;" to do? That translates as make month equal to month. Do you go to the bank and say " I have exactly $3.56 in my pocket, so I would like to deposite all $3.56 and then withdraw $3.56 and put it back in my pocket"? How do you think the teller would look at you? Teller would probably do it, but the teller would feel like he/she wasted time with you and that you are not really right in the head. Java feels the same way when you make it do the same thing, and you love to do it.
6. Code like the following is all wrong, and for more reasons than pointed out in hint 5.
if (month >= 1)
month = month;
else
if (month <= 12)
month = month;
else;Let's say someone put 13 in as the month. It passes the first check because 13 is greater than or equal to 1. so month which is 13, now gets set to 13 (gee that was effective). Now we hit the else and things get confusing because you didn't use brackets or proper indentation (hint 1) so we don't know what your real intent was. Did you mean else do nothing, and the next if statement is then executed, or did you mean to just run the next if statement if the else condition was met? Fortunatly it doesn't matter here because the next if statement is failed anyways since 13 is not less than or equal to 12.
So, we leave this code with month ebing 13, wait when did we add a 13th month to the calendar? Are you using the Jewish calendar? Could be, except even if I put 1234567 as the month your code would except it as valid, and I know no calendar with that many months. Try writing this in english first and translating it to jave, like i would probably say "if the month is greater than or equal to 1 and less than or equal to 12 then the month is valid." Course now what do you do if it is invalid? Hmm, maybe I would actually say "while the month is less than 1 or greater than 12 ask the user for the month" until they get it right.
There are a few other problems, but most of them are probably things you haven't learned yet, and they are not show stoppers so we will let them fly. You already have a lot of work to do to make this better. But I do have one more really really big usefull hint for you:
Never, ever, under any circumstances, should you ever ask in any way or even hint at asking for someone else to provide code solutions to your problems. So "so if you do hint me with some code then I'd appreciate it if it was stuff that's not too advanced " was a very bad thing to do, but fortunatly for you you followed it with proof you were trying to write the code yourself. Had the code you provided not been so full of problems it was obvious a beginner wrote it, you would probably have gotten much less cordial responses. I would seriously consider avoiding any implication of wanting code, at least until you become a regular poster here and people know you are not just looking to get your homework done for you.
Hope some of this helps.
JSG

Losing Data Validation Messages when writing back to context

( The base for this question is the ALV grid in section 2 of this [TimeSheetMockUp|http://www.duke.edu/~michaelm/TimeCard/AnnotatedTimeSheet.jpg] )
Users enter values in the white cells which represent the hours recorded on a given day for a certain type of time.
Lets say we have a z-object that supplies us with the overall grid structure, including the headers and (the shaded) summarization cells. The web dynpro ALV had been set to allow input only on the raw data cells. They are set to 4 places with one decimal.
As the app was being developed, when we entered invalid data in a cell, such as 123456, or 1.2345 or u2018qu2019, a nice message was displayed that told the us about the issue. This was free u2013 I guess the phase model does that for us, and we liked it.
Well, down the road a pieceu2026 we needed to add a method to recalc all the summary values from the raw inputs.
METHOD wddoafteraction .
* wizard: navigate to and get the rows data                         *
DATA lo_nd_nd_rows TYPE REF TO if_wd_context_node.
DATA lt_nd_rows TYPE wd_this->elements_nd_rows.
* navigate from <CONTEXT> to <ND_ROWS> via lead selection
lo_nd_nd_rows = wd_context->get_child_node( name = wd_this->wdctx_nd_rows ).
lo_nd_nd_rows->get_static_attributes_table( IMPORTING table = lt_nd_rows ).
* do the math                                                       *
DATA lt_updated_rows TYPE wd_this->elements_nd_rows.
CALL METHOD wd_assist->o_wc->recalc_update_and_return_wrows
    EXPORTING
      im_rows = lt_nd_rows
    IMPORTING
      ex_rows = lt_updated_rows.
* repopulate the rows                                      *
lo_nd_nd_rows->bind_table( new_items = lt_updated_rows set_initial_elements = abap_true ).
Now, weu2019re losing all the nice data validation messages u2013 they do not display (the offending entries are just cleared) !!!
After some investigation, it seems that the bind_table call is where they get lost (without that call, they appear) .
Iu2019ve tried placing this code in a number of hook methods, but the same thing occurs. It is currently in the viewu2019s afteraction hook.
So, u2026 I have two questions.
u2022     How do I get my nice messages back. ?
u2022      Where is the right place to update my context from
( Btw, downstream, our recalc outines will also want to throw messages that we will want processed after we get through the initial validation )
Thanksu2026
u2026Mike

Fixed with SAP Note 1410122 - WD ABAP ALV: Messages are not displayed

ADF Date Validation

Similar Messages

Maybe you are looking for