ADF Dynamic region in a popup does not load

Hi Experts,
JDEV version used 11.1.1.5
I have a page which has a table and each row has a command link on one of the columns.
When I click on the command link an action listener is invoked which decides the DYNAMIC TF that is to be loaded in a pop up .
The pop up has a dynamic adf region in it.
Based on the record clicked (using command link) task flow is loaded in the dynamic region of the the Popup .
But, when i click the same link for the second time or a different record the popup is displayed as blank , The taskflow in the dynamic region is not loaded at all.(getDynamicTaskFlowId is invoked and is also returing the correct TF to be loaded)
First time it works as expected  , but its not happening from the second time.
I have used conditional activation , but later due to the above issue I have tried to put an expression #{true} for the active property to test if it works. It didn't.
Please note that first time there is no issue.It does not work from the second click on same record or any other record.
Any other suggestions to fix the above issue  are much appreciated.
Thanks,
Vikranth

Hi Frank,
I have followed the same approach. However in my case its a dynamic af:region which is causing the issue.
Any other pointers is much apprecitaed.
Thanks,
Vikranth

Similar Messages

  • When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear. How can I save the new password if popup does not appear?

    When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear.
    How can I save the new password if popup does not appear?

    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • Applet does not load in IE when hosted in form via SHDocVw.dll

    Hi
    I have a signed applet that usually works well in IE and Mozilla FireFox.
    It shows a popup window with the security question Yes/No/Always and works great thereafter.
    However
    We have now developed a Vb.Net application which hosts the SHDocVw.dll and now when for example I navigate to the web page within this embedded browser control from Microsoft the applet does not load and the popup window does not appear, when trying to access it via clientside scriptring it does not find the applet object.
    // this fails when called from embedded browser control
    <script>
    document.applets[0].prepareControl();
    </script>
    Please help me I would really like to get the applet to work when using this new vb.net application with the embedded browser control because it is becoming our company's standard to hos apps in this new app and not open a new instance of IE for each application.
    Thanks
    Ian Coetzer

    What does the trace say?
    To turn the full trace on (windows) you can start the java console, to be found here:
    C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
    In the advanced tab you can fill in something for runtime parameters fill in this:
    -Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
    if you cannot start the java console check here:
    C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
    I think for linux this is somewhere in youruserdir/java (hidden directory)
    add or change the following line:
    javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
    for 1.5:
    deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
    The trace is here:
    C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
    I think for linux this is somewhere in youruserdir/java (hidden directory)
    Print out the full trace of the exception:
    try{...}catch(Exception e){e.printStackTrace();}
    If no trace is created my guess is that the jre is never started, try the <object tag
    instead for your applet (html page) because your browser tries to run the applet with msjvm.

  • Mozilla Addons site does not load correctly in IE - impala-min.js

    It seems that the Mozilla Addons website does not load correctly any more in IE and the errors below are generated on XP (IE8), Windows 7 (IE9) and Windows 8 (IE10). It seems to be a JavaScript error from the messages from webpage error popup.
    Browsing any addon specific page (NoScript, Menu Editor, Flashblock, etc) all seem to hang with the
    'loading-more.gif' graphic showing constantly and none of the lower tabs (Version Information, etc) will open to show information.
    I know technically this isn't a Firefox issue but I use IE to check version compatibility of addons before loading in Firefox. Perverse I know but hey it works, or used to until very recently.

    This wasn't a question about loading Firefox extensions in IE which would not have a clue about the contents of the .XPI file.
    This was about an error on the addons page which seems to stop ANY of the pages from showing details of the extension such as user reviews, developer feedback and version history...
    Viewing from Firefox they just show as compatible and versions over 3.6 but from IE you could see what versions the extension was compatible with, ie 9 thru 15 which is far more helpful when deciding which to deploy in a workplace.
    Have tried this on four different machines with the same outcome for viewing in IE!

  • PowerPoint Movie does not load in Safari on iPad

    I borrowed a friend's iPad to learn how to use it. It was gift she received a few months ago from her family. So, it is this year's model.
    Upon doing so, I thought I would check one of my website's that has PowerPoint movies on them. I chose Safari as the browser.
    I found out that the two movies on my website would not load. They load perfectly well when I am using desktop computers including other platforms than the iMac or MacBook. My MacBook has Mavericks and the two pages load. Ditto from my iMac using Mountain Lion.
    The website is constructed using the latest version of iWeb.
    I wish to know why the iPad using Safari does not load the two movies.
    Here are the URLs for each page:
    http://lanark-baldersonpastoralcharge.ca/Inspiration_Motivation-1st_Year_Student s.html
    http://lanark-baldersonpastoralcharge.ca/The_Four_Candles_Proverb.html
    I would appreciate assistance.
    Thank you!

    Well evidently she was born in New Orleans, but raised in
    Oakland. So, yes I would say the content is loading. Don't know
    what to tell you. What version of Safari are you using? What
    version of the Flash plugin is installed? Can you directly enter
    the url and have the page open?
    There appears to be nothing wrong with your loadMovieNum
    code. Perhaps there is something wrong with your preloader code?
    A guide layer is just that, a guide layer, and it will not be
    published. The best way to do it depends upon how you are making
    this. You can simply put a black square behind the text. Or if you
    are using dynamic text boxes you can turn the background property
    on and set the back ground color. Or if you are using buttons just
    go to the hit area and add a some drawing.

  • Mail does not load the mail after opening with 10.10.3 on macbook air

    Mail does not load the mail after opening with 10.10.3 on macbook air

    Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
    If it's red, this usually means it's missing the password.
    For Incoming messages, set in the account window, under Account Information tab.
    For Outgoing (SMTP) messages, follow these steps:
    EDIT SMTP SETTINGS
    In Accounts window > Outgoing Mail Server SMTP:  select to Edit SMTP Server list... from popup.
    Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
    Under Advanced Tab:
    Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
    Verify if your server require SSL.
    User Name. Enter full email address  eg.  [email protected]
    Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password  more info)
    Open Connection Doctor under Window in the Menu bar.
    Do you see green light now for your account SMTP?

  • Map does not load and screen stays partially blank

    There is a link on a website that I use for work that loads a map on a new tab. That link was working fine with the previous version of Firefox. But ever since I installed the latest Firefox version available, the link leads to a new tab with partial information but the map does not load and the area where it was supposed to load stays blank. Refreshing the page does not solve the situation.

    if you are using mapquest -- i had the same problem. i simply reinstalled firefox 3.6 and uninstalled version 4.0. the popup function was restored.

  • Firefox 33.1 does not load Adobe Flash Player 15.0.0.223

    As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
    If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
    Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
    If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
    Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
    By the way:
    Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
    Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
    The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
    Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
    Enjoy!

    Please refrain from posting scattergun boilerplate suggestions.
    Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
    Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
    Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
    Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
    For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
    I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
    Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
    Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it.

  • IE 11 Does not load pages and "Stops Responding" After 11/26/2013 Windows Update

    I have Windows 7 Pro 64 bit. IE 11. (Doesn't matter if I try to open 32 or 64 bit IE)
    I keep Automatic Updates on and they install as soon as they are available.
    Everything on my PC was running fine 11/25/13.
    I came to it 11/26/13 after Windows Updates ran and now whenever I open any webpages, it does not load the web page 100%, no hyperlinks can be clicked on and once you attempt to click on anything. I get the "IE 11 has stopped responding" bubble.
    It also seemed to affect Firefox which does not completely load pages either.
    Any shove in the correct way to help solve this would be helpful.

    Robert -
    Anyone who has gathered over 13,000 points is certainly to be respected as being super smart and uber helpful.  However, your response is inadequate on two counts.
    First, "stopped working" is not an inexact phrase, nor is it a euphemism trotted out by a newbie who hasn't the skill to describe the problem accurately. "stopped working" is an exact part of the error message issued by Windows.  Of course it would
    help if Windows would issue error messages that are more useful, but that is a different issue. For the purposes of this discussion, "stopped working" as part of the exact error message is a useful piece of information.
    Second, despite your excellent suggestions for hunting down the problem, I'm guessing that few people here have the time or inclination to be beta testers for Microsoft.  Even if the exact cause is found, it is not likely that anyone here will
    be able to fix the problem.  There are literally hundreds of people complaining about this problem in multiple forums.  If you know your consumer behavior metrics, then you know that means tens of thousands are affected.  This is systemic, not
    a random problem on a few errant machines.  Microsoft needs to know that they have a major problem on their hands and they need to fix it.  I saw this problem starting with IE 10.  Is it any wonder that in that time, IE usage has fallen greatly
    while Chrome has become the dominant browser?  (The only reason I am bothering to write instead of just shifting to Chrome is that Chrome also has its bugs, one of which affects a web app I use several times a week, so I need a functioning version of
    IE.)
    So thanks Robert for all your help in the past, but this response isn't helpful.
    Microsoft, are you listening?  Fix your browser.

  • Image does not load in application

    Hi:
    I read about the following in a loading image tutorial:
    "The getImage methods return immediately, without checking whether the image data exists. The actual loading of image data normally doesn't start until the first time the program tries to paint the image. "
    Basically, I am using the
    Image img = Toolkit.getDefaultToolkit().getImage(path);I've also overwritten the paintComponent()method
    public void paintComponent(Graphics g)
       super.paintComponent(g);
       g.drawImage(image, 0,0, myWidth, myHeight, this);
    }Then, I included the above code in a JPanel, which is further included in a JInternalFrame. But somehow, the image just doesn't load, the tutorial says, the image does not load until the FIRST TIME PROGRAM PAINTS THE IMAGE. How do I make the program paint the image??
    Thanx a lot

    Check out ImageObserver, Component.prepareImage() and MediaTracker.

  • Site does not load after some minutes of creation or after restart the server

    Hello,
    I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
    Backed up the production web application's content database: Prod_WSS_ContentDB
    Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
    Created a new web application in test environment with a new content database.
    Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
    Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
    Mount the Prod_WSS_ContentDB databe to the web application with powershell:
    Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
    Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
    and the site loads exactly as the production environment.
    But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
    http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
    as expected, but the site does not load, the browser just show a complety blank page.
    The Central Administration site loads normally.
    Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
    then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
    For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve  this?
    The error is:
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          6/27/2014 2:44:22 PM
    Event ID:      5586
    Task Category: Database
    Level:         Error
    Keywords:      
    User:          UCETEST\spaccount
    Computer:      TESTSP01.ucetest.edu.do
    Description:
    Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
    A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>5586</EventID>
        <Version>15</Version>
        <Level>2</Level>
        <Task>3</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
        <EventRecordID>4742</EventRecordID>
        <Correlation />
        <Execution ProcessID="1688" ThreadID="1692" />
        <Channel>Application</Channel>
        <Computer>TESTSP01.ucetest.edu.do</Computer>
        <Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
      </System>
      <EventData>
        <Data Name="int0">-2146893055</Data>
        <Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
      </EventData>
    </Event>
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

    Hi,
    According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
    Please make sure you create a test environment for existing production site correctly.
    Here are some great articles for your reference:
    Moving content between SharePoint environments
    Copy SharePoint production data to a test environment
    Build a SharePoint 2010 Test/Development Farm
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support
    Hello Linda Li,
    I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

  • When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

    When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
    It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
    Please help, how can I fix this?
    Thanks,
    James.

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

  • Applet does not load on app server when Free Design Layout

    Hi,
    I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
    As shown in the tuorial:
    [http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
    1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
    2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
    3. Then I a webpage I "embeded" the applet.
    4. I run the web app and the applet gets loaded and everything is just fine.
    But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
    When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
    When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
    But!
    When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
    java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
    at java.lang.Class.getConstructor0(Unknown Source)
    at java.lang.Class.newInstance0(Unknown Source)
    at java.lang.Class.newInstance(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    ... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
    But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
    My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<</u>
    Thanks for all your replies.
    Cheers.
    Edited by: arijit_datta on May 15, 2008 4:07 PM

    Solved.
    Here is the solution:
    [http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
    Cheers..
    Edited by: arijit_datta on May 16, 2008 7:41 AM

  • 5th gen Ipod does not load video on Itunes

    My 5th gen color Ipod recently began having problems when I updated Itunes software.
    The video that is on my Itunes library does not transfer when synced to Ipod.
    Video on Macbook plays but is not recognized by Ipod and does not load.
    Any help is appreciated.

    Check your settings for sync. The default for videos are that only unwatched videos get synced.

Maybe you are looking for