ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.

When I generate a pdf Reporte using <af:fileDownloadActionListene> and Ireport this erros fires when i click active tab.
I'm Using Studio Edition Version 11.1.2.3.0:
pt1 is a <af:pageTemplate>
cil2 us <af:commandImageLink disabled="#{!bindings.CreateInsertEnc.enabled}" id="cil2"
<af:commandImageLink id="cil11"
binding="#{backingBeanScope.BakingDocument.cil11}"
icon="/Pictures/printer.png"
shortDesc="Print">
<af:fileDownloadActionListener method="#{backingBeanScope.BakingCotizar.PrintDoc}"/>
</af:commandImageLink>
Error Log:
java.lang.IllegalStateException: ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.
     at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.unregisterComponent(PageDataUpdateManager.java:600)
     at oracle.adfinternal.view.faces.context.RichPhaseListener.handleStartAndStopActiveData(RichPhaseListener.java:478)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:487)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Don't work, all iterator have ChaangeEventPolicy: default none.
And adfc-config.xml has ChaangeEventPolicy unchequed.
Another suggestion please. I need a solution so fast.

Similar Messages

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

My iphone 3gs with version 4.0 not works for apple TV should i need to download any app or any other thng

my iphone 3gs with version 4.0 not works for apple TV what should i do?

Welcome to the Apple community.
You should update your iPhone software.

I attempt to send an e-mail to an address in my Directory and it comes up in a pink block with a red circled exclamation point at the end. "Clicking" on the circle brings a pop-up saying the address is not registered for iMessages. How do I register ??

When I try to address an e-mail to an address in my iPad's Directory, the name comes up inside a pink block with a red circled exclamation point at the right hand end. "Clicking" on the red circle, gives me a pop-up saying the address is not registered for an iMessage. How do I register my Directory addresses for an iMessage??

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

My lil bro locked my ipod.. he doesnt know the combination he used though.. how can i unlock the ipod if i can't get it to unlock with itunes because its not registered in my cp?

my lil bro locked my ipod.. he doesnt know the combination he used though.. how can i unlock the ipod if i can't get it to unlock with itunes because its not registered in my cp?

Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

What will going to happend with app that are not ready for IOS 5?

What will going to happend with app that are not ready for IOS 5?

Most applications will work just fine. I typically have 150 or so apps installed, and typically only 1 or 2 will "break". The vast majority of apps will continue to operate just as well as before if not better. iOS developers are privy to beta testing the upcoming OS, so the week or so before and after the official release you'll see a larger number of apps needing to be updated than normal. Last night I updated 23 apps, and you'll see alot over the next week or two getting updates. Most are making minor changes to take advantage of new APIs, or add a new feature based on a new function of the OS (like twitter integration into the OS for example). Very few apps, (maybe 3-4 percent??) actually are getting updated because they're broken, but there will be a few. Most of the time, any apps that would break will have already been addressed in an update prior to the release of the new OS, and you've probably already updated that app so that it will work seamlessly and perfectly after the update hits.

My phone keeps flashing up with 'this device is not accessorised for this i phone and its not plugged into anything, can anyone help?

my iphone 4 keeps flashing up with 'this device is not accessorised for this iphone' and its not plugged into anything, can anyone help?

The most common reason for this message is, the iPhone dock port needs to be cleaned, use a clean dry tooth brush. See if this helps. If you keep getting the message, then clean the dock port again very carefully with isopropyll alcohol, expecially the pins which are on top of the dock mid rib. If still problems make appointment with Apple Genius.

LOCID is not defiend for Order data type ORDR

Dear All,
I am trying to load data in to Order forecast details in Dynamic
replenishment of SNC in the WEB UI, after entering the Product and
Customer location, when I clicked on GO system is giving the below
error.
Time series error in class /SCF/CL_ICHDM_DEMANDMN_DATAAXS
method /SCF/IF_ICHDMAXS_2_CNTL~SELECT
Access error for time series type DFC01, key figure CORDEROR, ODM
message: Parameter LOCID is not define for order data type ORDR
Could you please help me out what to do in this case.
I have re activated the following components mentioned, still system is
giving the above problem.
Activate Order Component
Activate Order Data Type
Activate Order Data Area
and
Activate Time Series Data Type
Activate Time Series Data Area
Thanks and Regards,
T.Muthyalappa

Hi,
Make sure you have proper authorization.(sometime system does not display the error but user don't have authorization to create/update/modify table entries to be on safer side assign SAP_ALL profile to your ID if it is allowed as per your company security process).
I think issue is with InfoObject 9ALOCID is not activated properly.
You need activate InfoObject 9ALOCID as mention i below step2 but it is better you follow below steps.
1) Then force generate ODM.
2)Go to transaction code:/N/SCA/TSDM09 enter time series DFC01 and select Radio button Activate Planning object Structure.
Regards,
Nikhil.

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

Trying to import cd, it only shows tracks, not song titles. when i try and get the titles it says im not registered for online use even though im signed in. how can i fix this?

Im trying to import songs from a cd, but it only shows track numbers, no title of songs.when it try to get the titles it gives error code saying im not registered for online use. i am signed into my account so i dont know how to fix this.

The "not recognized for on-line use" error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\.
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure.
If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

AADSTS70001: Application '.....' is not registered for the account.

I am trying to create a web asp.net application to add a user to Azure Active Directory(ADD). I have the single Sign on working properly. AD and Application are created. When I try to add a new user to the AD via my codebehind I get AADSTS70001:
Application '-------' is not registered for the account.
I am in development so I am using locolhost as the domain. I am using Microsoft.IdentityModel.Clients.ActiveDirectory and AcquireToken. That is where the error happens.
Am I missing a setting somewhere?
Mark Perry

Hi Matt,
I am trying to deal with a similar error:
Correlation ID: a8e117b5-bb9e-4877-8fcb-dc087397a44b
Timestamp: 2015-02-09 17:56:49Z
AADSTS70001: Application with identifier https://xxxxxxx.accesscontrol.windows.net/ was not found in the directory 61ae352e-45c7-40a2-9a95-bd2a8288cf27
Not sure what you mean by registering the app in the tenant. If that is adding the app in the AAD tenant, then yes, I've done that. However, does the APP ID URI in the tenant need to match the URL for the app (i.e. http://localhost:xxxxx)?
Thanks,
Russell

ADF_FACES-60003:Component with ID: pt1:cil2 not registered for Active Data.

Similar Messages

Maybe you are looking for