ADF Faces Skins: Way to refer to more than one alias in a selector?

Is there any way to refer to more than one alias at a time in a selector? The obvious one,
.SpotlightStyles
-ora-rule-ref:selector(".AFVeryLargeFont:alias");
-ora-rule-ref:selector(".AFMediumForeground:alias");
}doesn't seem to work...it looks like only the last mentioned rule gets used.
Thanks much,
Avrom

Hi,
well not quite sure about your issue. But normally additional key fields for a characteristic are maintained doing a compounding of the characteristic to at least one other characteristic. You can do that in the infoobject maintenance on the tab compounding.
regards
Siggi

Similar Messages

If possible, one SoftReference refer to more than one object?

Hello,
I want design a cache to keep huge number objects.
If create a new SoftReference intance for each object,
will take a lot of space and time.
So, one SoftReference refer to more than one object, if possible?

or arrange your objects into buckets somehow and have
soft references to the bucketsEn, It's a good idea. but I think it doesn't work.
My problem is:
There are many caches(cache1, cache2.......), they may cache a lot of same object instance.
then, I want to keep a object pool, and try to get the equal object from pool before put a object into a cache, if there is an equal object, put the equal object into cache, if there is no equal object, put the target object into pool and cache. the object pool may very huge because there is lot of objects. So it's necessary to release the object in the pool if no cache referes to the object(the caches contain the object may removed). Then SoftReference come into my mind. I try to create a SoftReference for each object in the pool, but soonly, I find there are two problems:
1, A lot SoftReference instances take much memory.
2, Need some time to new and reclaim the SoftReference intances.
I think SoftReference may work fine to cache the object frequently used,
but the object number can't be too large.
Now, I don't use object pool. replace starting a thread to scan those cache s and combine the same objects intervally. It can scan about 2000,000 objects one second in my pc. It's ok for my project. But I am looking for some better way still.

Is there a way to "red eye" more than one photo at a time?

Is there a way to "red eye" more than one photo at a time?

No.
OT

HT204380 Is there a way to talk to more than one person at a time on FaceTime?

Is there a way to talk to more than one person at a time on FaceTime?

No.
OT

Problems installing SSL certificates for more than one alias on iMS 5.2

I have a problem to getting encyption on IMAP/HTTP/SMTP when they are on the same server. I only getting one SSL certificate installed by the Netscape console wizard, and therefore only one alias.
Let's say I have 3 aliases to the same server just for the scalability, imap.vxu.se, smtp.vxu.se and mail.vxu.se for http (https). Then I can only have one certificate installed at the same time, for example https://mail.vxu.se. And the others, like (S)IMAP I getting a dialouge that says the hostname doesnt is the same as the registred in the certificate. How do I solve this? Is there some possibillity to install more than ONE certificate, so I can have one certificate for each alias?
Environment: Full 420R, Solaris 8, iMS5.2
Thanks in advice

Although I completely agree the comments that suggestion this is not a great configuration idea, the error you are seeing ("...bean not found...") likely has nothing to do with the configuration - at least not as mentioned. My first guess is that if you are running the same exact form (FMX) as you ran for your first test then there should be no error. The only way such an error would appear is if the proper jar files are not being pulled to the client JRE or if the fmx was not properly generated. Be sure you are including config=webutil in the URL or that you have added the Webutil configuration info to your own named configuration section of formsweb.cfg
Regardless, if this is a Windows machine, the probability of having problems with multiple installations of the same version is high. Consider that the system PATH, CLASSPATH, ORACLE_HOME and various other system variables needed by the server side of the installation will overlap for each installation. This will cause problems. On the client side, attempting to download jars of the same name from the same server, but which are not actually the same files will confuse the JRE. If the JRE detects that a file which it has already cached is coming from the same server (host) then it will not attempt to pull it again. This will be a problem if the jars are not exactly the same in both installation. Making the problem worse is that you may not be able to easily determine from which installation the jars (or any files) were obtained.
So. as a general rule, regardless of whether multple installations can co-exist, I would not recommend it. This is especially true on a Windows platform.

Best way to not allow more than one user on page.

Do not want another user editing a record on a page when another user is on that page. Any ideas on the approach I should use?

Please provide more information. What you describe is the normal, default situation anyway.
A thousand of us have opened a page. Our browsers each caches a copy of the page. So, in normal circumstances, one is not really on the page. If the 1001st client were to open the page and edit the record, we wouldn't be aware of the change till we refresh or revisit the page.

Is there any way i can have more than one login accounts other than the administration account i have when i first set up my computer?

I have a Mac mini, Mac OS X (10.6.8) and i am trying to set up an account for someone who regularly logs onto my guest account. I am doing this so whenever they are here and need to use my computer, they can use it without using my account( the admin account) or guest account( where the have to log into guest account and work on whatever it is they needed to do, then unfortuanatly have to erase all files from that day so they can log out )
I still want it to be an account for that person to have when they are here, but NOT guest account. Just an additional account. ANY HELP WOULD BE MUCH APPRECIATED!! Thanks in advance! <3

OH MY! THAT WAS RIGHT IN FRONT OF ME THE WHOLE TIME!!
THANKS A LOT!!

Is there a way I can have more than one tab of the same website open?

It seems kind of silly that I'm not allowed to turn off the feature where it switches to the tab that is already open of that site, even if it is in a different window. Sometimes I need to have duplicates of a site open, like alarm clocks, or certain info sites.

There's no reason why you shouldn't have multiple tabs of the same site open if you want to.
Can you do the following first of all. Go to http://get.adobe.com/flashplayer/ and update Flash.
If the problem persists in spite of the above, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

Drill down more than one characteristic at the same time.

Hi,
Is there any way to drill down more than one characteristic at the same time?
When I drill down by 0cust_sales I would like to have drilled down: division/distrchan/salesorg/cust_sales without having to do that one by one.
thank you!

Hi,
This cannot be done unless these characterstics are related to each other in some way as Charactertics & Display Attributes.
The reason being when you drill down the 0cust_sales , there is no link from 0Cust_sales to the other characterstics hence there is no prompt for these characterstics to be drilled down.
However, a smiliar thing might be acheived by adding these chareacterstics into the 0cust_sales in teh query designer by dragging n dropping them over 0cust_sales. you can try this and see if this is close to your requiremetn.
Kind Regards,
Tapish

Copy more than one clip at a time from iPhoto to iMovie?? Please help!

Is it possible to copy more than one clip at a time from iPhoto to iMovie? I can't find a way to select/copy more than one.

OK you can leave them in iPhoto and access them from the iMovie Event for iPhoto.
If you prefer to move them to a regular iMovie Event, you can do the following.
1) right-click on one of the iPhoto clips and select "Reveal in Finder". This will open a finder window showing the clips in the iPhoto Library.
2) In a different Finder window, create a folder to hold your event in iMovie. If you are using an internal drive, create a folder using your desired Event Name under the Movies/iMovie Events Folder.
Note: If you are using an external drive, create a Folder called iMovie Events at the top level of the external drive. Then create the (Event Name) folder under this. The external drive must be formatted as MacOS Extended (journaled) for this to work.
3) Select all the clips in the iPhoto finder window that are part of this event and Move them to the Movies/iMovie Event/(Event Name) folder.
4) After you have done this for all the Events, open iMovie and let it generate thumbnails. This may take a while.

Search Query Help – more than one word

I have been struggling with this for weeks. I used Dreamweaver to set up a lot of this and I think it is hindering me as I make changes to the code.
I have a search interface that takes the input from a user (in the form of text) – searches though the db to match words – then return the results based on how many times the input is located in the db.
I have this working very good for a single word input. If you search for one word only – it works great. But, if you try to input two words together – it returns no results.
I have tried several different things to get this to work – like exploding the input then searching the db for each word in order. The problems I get, I think, is that this conflicts with the code Dreamweaver wrote – I think where the code requests the value string. But, each time I think I find a fix for one error – it creates several others – not just in the php code above the header – but in the php code in the body when I try to retrieve the results.
It seems that I am just going around in circles. But, there has to be simple way to search for more than one word in the db – count the matches – add the matches from each search together – then return the results ordered by the largest number of matches.
I have even tried using a foreach statement – but received errors that I have never seen before. Then after researching and trying to fix those errors – just received more and more errors.
Please help. If it cannot be done given the code I have – then please point me in the right direction to rewrite the code.
Code is attached.

Based on what you explained as your requirements, it is very easy. I'll just speak in psuedo-code. You will need to parse the input into seperate words. If there can be an unknown number of words you can store those in a string array.
Then just use the array to build your where clause using the IN predicate or using the = and OR operators.
Select count(*), keyword
where keyword in (term[0], term[1], etc)
group by keyword
order by count(*) desc
If this is not what you meant, then you will need to explain your requirements in more detail. As you have discovered, once your requirements exceep the capabilities of DW's behaviors, you will need to become very familar with sql and your server side scripting language. If you don't understand what the DW code is doing (as evidenced by your comments in the attachment), then you really are not ready to start modifying it.

Can a Method listen to more than one event in ABAP OO ?

Hi,
is it possible to prepare/register a handler method for e.g two events of two different classes ?
Or can a method generally listen to only one event ?
It seems that the syntax allows only one event ?
methods event_handler for event my_event of my_class.
Thanks for help in advance
Olaf

An event can refer to more than one object but you have to instantiate the objects
for example   I have 2 grids and want to handle events depending on which grid
the user is selecting / requesting actions on. (I've just posted the relevant bits coded here as data extraction etc you can code normally).
FORM instantiate_grid
* Create Grid container
* Instantiate Grid class
* Instantiate Event Handler class
* Display the Grid
   USING grid_container TYPE REF TO cl_gui_custom_container
          class_object TYPE REF TO cl_gui_alv_grid
          container_name TYPE scrfname.
* create the container
CREATE OBJECT grid_container
EXPORTING container_name = container_name.
* Create the ALV grid object using
* container just created
CREATE OBJECT class_object
EXPORTING
     i_parent = grid_container.
* Exclude the SUM function from the GRID toolbar
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO lt_exclude.
* Instantiate our handler class
* lcl_event_handler
CALL METHOD class_object->register_edit_event
    EXPORTING
      i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CREATE OBJECT g_handler.
SET HANDLER g_handler->handle_double_click FOR class_object.
SET HANDLER g_handler->handle_hotspot_click FOR class_object.
SET HANDLER g_handler->handle_toolbar FOR class_object.
SET HANDLER g_handler->handle_user_command FOR class_object.
SET HANDLER g_handler->handle_data_changed FOR class_object.
SET HANDLER g_handler->handle_data_changed_finished FOR class_object.
ENDFORM.                    "instantiate_grid
MODULE status_0100 OUTPUT.
IF grid_container IS INITIAL.
    PERFORM instantiate_grid
       USING grid_container
             grid1
             'CCONTAINER1'.
* Grid title Primary Grid
    struct_grid_lset-grid_title = 'Delimit Old org Units - Selection'.
    struct_grid_lset-edit = 'X'.
    struct_grid_lset-sel_mode = 'D'.
    PERFORM display_grid
     USING
        grid1
         <dyn_table>
         it_fldcat.
ENDIF.
SET PF-STATUS '001'.
SET TITLEBAR '000' WITH 'Delimit Old Org Units'.
ENDMODULE.                    "status_0100 OUTPUT
* PAI module
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'CANC'.
      LEAVE PROGRAM.
    WHEN 'RETURN'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                    "user_command_0100 INPUT
MODULE status_0200 OUTPUT.
IF grid_container1 IS INITIAL.
    PERFORM instantiate_grid
       USING grid_container1
             grid2
             'CCONTAINER2'.
* Grid title secondary grid
    struct_grid_lset-grid_title = 'Delimited Objects'.
    struct_grid_lset-edit = ' '.
    PERFORM display_grid
     USING
        grid2
         <dyn_table1>
         it_fldcat1.
SET PF-STATUS '001'.
SET TITLEBAR '000' WITH 'Org Units Delimited'.
endif.
ENDMODULE.                    "status_0200 OUTPUT
In your local event handling class use the variable SENDER to determine which grid / object triggered the event
for example
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
    METHODS:
**Hot spot Handler
    handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
                      IMPORTING e_row_id e_column_id es_row_no,
**Double Click Handler
    handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
                                    IMPORTING e_row e_column es_row_no
                                    sender,
** Toolbar handler.
handle_toolbar
        FOR EVENT toolbar OF cl_gui_alv_grid
            IMPORTING e_object e_interactive
            sender,
* button press
    handle_user_command
        FOR EVENT user_command OF cl_gui_alv_grid
            IMPORTING e_ucomm
             sender,
* data changed
handle_data_changed
    FOR EVENT data_changed OF cl_gui_alv_grid
      IMPORTING er_data_changed,
*data changed finished
handle_data_changed_finished
     FOR EVENT data_changed OF cl_gui_alv_grid,
download_to_excel.
ENDCLASS.                    "lcl_event_handler DEFINITION
* Implementation methods for lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
*Handle Hotspot Click
* When a "hotspotted"cell is double clicked
* Hotspot indicatore needs to be set in
* the field catalog.
* Not required for this application.
METHOD handle_hotspot_click .
    PERFORM mouse_click
      USING e_row_id
            e_column_id.
    CALL METHOD grid1->get_current_cell
      IMPORTING
        e_row     = ls_row
        e_value   = ls_value
        e_col     = ls_col
        es_row_id = ls_row_id
        es_col_id = ls_col_id
        es_row_no = es_row_no.
    CALL METHOD grid1->refresh_table_display.
    CALL METHOD grid1->set_current_cell_via_id
      EXPORTING
        is_column_id = e_column_id
        is_row_no    = es_row_no.
ENDMETHOD.                    "lcl_event_handler
*Handle Double Click
METHOD handle_double_click.
    CASE sender.
      WHEN grid1.
* returns cell double clicked FROM GRID 1
* Ignore any event from GRID 2
        PERFORM double_click
           USING e_row
           e_column.
    ENDCASE.
ENDMETHOD.                    "handle_double_click
* Add our buttons to standard toolbar
METHOD handle_toolbar.
    CASE sender.
* Only add functionality to PRIMARY GRID (GRID 1)
      WHEN grid1.
* append a separator to normal toolbar
        CLEAR ls_toolbar.
        MOVE 3 TO ls_toolbar-butn_type.
        APPEND ls_toolbar TO e_object->mt_toolbar.
* Delimit Org
        CLEAR ls_toolbar.
        MOVE 'PROC' TO ls_toolbar-function.
        MOVE icon_railway TO ls_toolbar-icon.
        MOVE 'DELIMIT' TO ls_toolbar-quickinfo.
        MOVE 'DELIMIT ORG UNIT' TO ls_toolbar-text.
        MOVE ' ' TO ls_toolbar-disabled.
        APPEND ls_toolbar TO e_object->mt_toolbar.
* Select All Rows
        MOVE 'SELE' TO ls_toolbar-function.
        MOVE icon_select_all TO ls_toolbar-icon.
        MOVE 'ALL CELLS' TO ls_toolbar-quickinfo.
        MOVE 'ALL CELLS' TO ls_toolbar-text.
        MOVE ' ' TO ls_toolbar-disabled.
        APPEND ls_toolbar TO e_object->mt_toolbar.
* Deselect all Rows.
        MOVE 'DSEL' TO ls_toolbar-function.
        MOVE icon_deselect_all TO ls_toolbar-icon.
        MOVE 'DESELECT ALL' TO ls_toolbar-quickinfo.
        MOVE 'DESELECT ALL' TO ls_toolbar-text.
        MOVE ' ' TO ls_toolbar-disabled.
        APPEND ls_toolbar TO e_object->mt_toolbar.
        ENDCASE.
     move 0 to ls_toolbar-butn_type.
     move 'EXCEL' to ls_toolbar-function.
     move space to ls_toolbar-disabled.
     move icon_xxl to ls_toolbar-icon.
     move 'Excel' to ls_toolbar-quickinfo.
     move 'EXCEL' to ls_toolbar-text.
     append ls_toolbar to e_object->mt_toolbar.
ENDMETHOD.                    "handle_toolbar
METHOD handle_user_command.
* Entered when a user presses a Grid toolbar
* standard toolbar functions processed
* normally
   g_sender = sender.
    CASE e_ucomm.
      WHEN 'PROC'.    "Process selected data
        PERFORM get_selected_rows.
      WHEN 'SELE'.
        PERFORM select_all_rows.
      WHEN 'DSEL'.
        PERFORM deselect_all_rows.
      WHEN 'EXCEL'.
          call method me->download_to_excel.
        WHEN OTHERS.
    ENDCASE.
ENDMETHOD.                    "handle_user_command
METHOD handle_data_changed.
* only entered on data change Not req for ths app.
    PERFORM data_changed USING er_data_changed.
ENDMETHOD.                    "data_changed
METHOD handle_data_changed_finished.
* only entered on data change finished Not req for ths app.
    PERFORM data_changed_finished.
ENDMETHOD.                    "data_changed_finished
* Interactive download to excel
method download_to_excel.
field-symbols:
   <qs0>   type standard table,
   <qs1>   type standard table.
data: G_OUTTAB1 type ref to data,
        g_fldcat1 type ref to data,
        LS_LAYOUT type KKBLO_LAYOUT,
        LT_FIELDCAT type KKBLO_T_FIELDCAT,
        LT_FIELDCAT_WA type KKBLO_FIELDCAT,
        L_TABNAME type SLIS_TABNAME.
case g_sender.
when grid1.
     get reference of <dyn_table> into g_outtab1.
     get reference of it_fldcat into g_fldcat1.
   when grid2.
   get reference of <dyn_table1> into g_outtab1.
     get reference of it_fldcat1 into g_fldcat1.
endcase.
   assign g_outtab1->* to <qs0>.
    assign g_fldcat1->* to <qs1>.
       call function 'LVC_TRANSFER_TO_KKBLO'
      exporting
        it_fieldcat_lvc   = <qs1>
*     is_layout_lvc     = m_cl_variant->ms_layout
         is_tech_complete = ' '
      importing
        es_layout_kkblo   = ls_layout
        et_fieldcat_kkblo = lt_fieldcat.
    loop at lt_fieldcat into lt_fieldcat_wa.
      clear lt_fieldcat_wa-tech_complete.
      if lt_fieldcat_wa-tabname is initial.
        lt_fieldcat_wa-tabname = '1'.
        modify lt_fieldcat from lt_fieldcat_wa.
      endif.
      l_tabname = lt_fieldcat_wa-tabname.
    endloop.
    call function 'ALV_XXL_CALL'
         exporting
              i_tabname           = l_tabname
              is_layout           = ls_layout
              it_fieldcat         = lt_fieldcat
              i_title             = sy-title
         tables
              it_outtab           = <qs0>
         exceptions
              fatal_error         = 1
              no_display_possible = 2
              others              = 3.
    if sy-subrc <> 0.
      message id sy-msgid type 'S' number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
endmethod.
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
The sender instance is a variable such as g_sender type ref to cl_gui_alv_grid.       "Sender instance.
The above example is for OO ALV grids but should work for other interactive cases where a User presses a key or does a mouse action.
Cheers
jimbo

SENDING MORE THAN ONE PIC VIA MMS

is there any way i can send more than one pic via mms on the pre?!

Hello and welcome to the forums;
At this time, you can only attach one picture per message. You would need to send each picture as its own message.
TreoAide

Connect to more than one database?

Hi,
Is there a way to connect to more than one database from Oracle form (one form)? If yes, what's the best practice to do it?
Saad,

hi
u can modify Tnsnames.ora for that
example:
test1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = IP Address)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = test1)
test2=
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = IP Address)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = test2)
)

ADF Faces Skins: Way to refer to more than one alias in a selector?

Similar Messages

Maybe you are looking for