ADF -how to create table binding when view object is no known until runtime

I want to programmatically create a table binding to a view object where the view object name is not known until run-time. Then I will use a dynamic table to display it. Can anyone provide an example?

I looked at example #9. It gets me closer to what I am looking for but not quite enough. In my case, I don't have (or want in this case) a pageDefinition with a pre-declared Iterator binding. I am converting an exsisting BC4J/Struts/JSP application. I would like to rewrite my reusable component tags to make use of ADF bindings and Faces. My tags are passed the ApplicationModule and ViewObject names as parameters, much like the old BC4J datatags. I do not want to go back and rewrite all of my pages from scratch using drag-and-drop declarative bindings with a pageDefinition for every page. I am hoping to have my rewritten tags handle everything programmatically based only on the ViewObject name passed at run-time.

Similar Messages

ADF - How to create table which column header come from query result

I would like to create table that show the summary of task for each month, the query result such as
Status MonthofYear Total Task
03 2007/06 9
03 2007/05 12
03 2007/04 10
03 2007/03 7
05 2007/06 6
05 2007/05 3
06 2007/06 1
09 2007/06 1
And the table that I would like to show in jdeveloper is
Status 2007/06 | 2007/05 | 2007/04 | 2007/03 | ......... | 2006/05
03 9 | 12 | 10 | 0 | .......
05 6 | 3 | 0 | 0 | .......
06 1 | 0 | 0 | 0 | .......
09 1 | 0 | 0 | 0 | .......

Lucas worked out a solution for this:
http://technology.amis.nl/blog/?p=2070

How to create table view with reference table

Hi experts,
How to create table view with reference table in SE11, plz gve me stp by stp procedure.
pints grnded for hlp.

Hi
Go to Tcode se11 choose view and enter the name and create a popup opens up choose database view option
enter the description
On the left hand side choose the table name.
Click on view fields tab and choose your table fields.Here you can choose which fields you want in your view.
Save and then activate.
Hope this helps.
Regards,
Harish

How to create table view

Dear Experts,
how to create table view for single table? and once I create table view I have to create Generic data source so plz provide me the step to create it.
Please search the forum before posting a thread
Edited by: Pravender on May 6, 2011 11:18 AM

Hi,
                     There is big advantage of creating a view for single table rather than RSO2.
            My scenario is like this : My table VBAK has 113 fields i want only 9 fields from them.
                     RSO2: By doing generic extraction with RSO2 it will fetch all 113 fields from the table VBAK.So,it'll definitely degrades the performance . For transferring 9 fields why we have to fetch all 113 fields.
                     VIEW: By using view we can specify some fields in view fields.So, only those 9 fields will be fetched from table. In this extract structure contains 9 field transferring 9 fields.Then we can create generic extraction using this view.
Regards
satya.

How to create tables in Database when webdynpro project is deployed

Hi
I Created a project.in that i created stuctures using simpletypes.Based on structure i created the Context,then created screens.Now how to create tables in database using this structures .Because i want to store the values in the database.Please help.this is very urgent.i will give good points
thanks
prasad

Hi Prasad,
You can write normal JDBC code in your controller.
Check this Web Dynpro Java
You can use the tool for generating the classes from your DB.Check this too
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dfad6017-0301-0010-bdb8-a8b7d2006f36
Best Regards, Anilkumar

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create a left join view in se11??

I would like to create a view which contains KNA1,KONA,KNVV,KNVH(four tables) , I want to use this view to create a search help for Tcode 'VBO3'.
but when I join table KNVH, there is no data in view, because there is no customer hierarchy, so I want to create a left join view. could you please tell me how to create a left join view? Thank you very much.

Hello,
yes, in general, maint. view and help view could be created as outer join view.
but it should obey relationship.
my fourt tables:
KONA -
> I want to get agreement number and type from this table
KNA1 -
>I want to get customer name, city, country from this table
KNVH -
>I want to get customer hierarchy from this table.
KNVV -
>I want to get customer group 1 from this table.
but in help view, I can only get relationship between KONA and KNA1.
I could not find the relationship for KNVH and KNVV.
if it's required to add a search help exit, then how to write the code in the function?
Could somebody please give me any solutions? thank you.

How i create popup menu when button onclick

how i create popup menu when button onclick

You try adding a scrip tag in your jsp code, and calling the function in the onclick attribute.
Example:
<script><![CDATA[
 function confirmDelete(){
 if(confirm("Are you sure you want to delete selected user")){
 return true;
 } else{
return false;
]]></script>
<ui:button action="#{View.delete_action}" binding="#{View.delete}" id="delete" onclick="confirmDelete"/>
Cheers
Daniel
null

How to create list of a View's column names and source

Using SQL 2005, 2008, and 2012
How to create list of a View's column names and source. For the following example would like to @Print something like the following. Does anyone already have some code to do this? I realize there are probably some gotchas, but the views that I am looking
at to use this follows the code snippet pattern below.
DBACCT.[Account Number]
dbo.ConvertDate(DBACDT). [Boarding Date]
DBXES.DBXES
CREATE VIEW [dbo].[v_ods_DBAL]
AS
SELECT DBACCT AS [Account Number], dbo.ConvertDate(DBACDT) AS [Boarding Date], DBXES
FROM dbo.ods_DBAL

The column information can be obtained from INFORMATION_SCHEMA.COLUMNS view using logic like below
SELECT c.COLUMN_NAME,c.DATA_TYPE
FROM INFORMATION_SCHEMA.COLUMNS c
WHERE EXISTS (SELECT 1
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = c.TABLE_NAME
AND TABLE_TYPE='VIEW')
http://technet.microsoft.com/en-us/library/ms188348.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

How to create table and digital signature ?

Hello,
I would like to ask two questions regarding SAP interactive forms by adobe.
1st question:
How to create table in interactive form?
Table that i can add rows and column and will show it in the form.
Example the rows and columns that i want:
ID: Name: DOB:
1 Jack 01/02/80
2 Ivy 10/12/82
2nd question:
How to create digital signature ?
I'm creating a adobe forms which need employee to sign on the form. I use signature field at my form. However, i don't know how to create a new signature and insert in the signature field.
Can any one provide the answer with step by step guide?
Thanks a lot

Hi Pradeepa,
you said you have your digital signature in
BMP format? That means Bitmap and would mean you are actually talking about a picture! THIS IS NOT A DIGITAL SIGNATURE!
A digital signature is a cryptographic key (aka public key cryptography) that is used to digitally sign a document, or at least a hash value derived from the document. Digitally signing means, applying the key in a well defined way (this is the algorithm used) to the document or hash value. You do this with your private key and the receiver of the document can then use your public key (which you can distribute in any way you want, even unsecure) to unencrypt the hash value. If this succeeds the receiver knows that the document was signed by you.
This is because both keys are mathematically related in such a way, that what one key encrypted can only be decrypted by the corresponding other key and by no other key. You even can´t decrypt a document with the same key it was encrypted with, this is the difference to symmetric encryption - please have a look at help.sap.com and search for digital signatures.
The named formats (afs, pfx and p12) are ways of coding the key, together with information about your person, such as email address and information about validity of the key into a
certificate. This type of certificate is then called a x.509 certificate and is the same you might have seen when connecting to a secure webserver such as the one of your bank website.
Signing a form with such a certificate provides for mathematically and therefore business related proove of a users identity.
In case you are really using a bitmap, this cannot work and would not serve you any good.
Ask yourself this question: I want to make sure that the form was signed by a specific person. How can I make sure that the signing can only be done by the person pretending to have done so?
A bitmap contains a picture, probably of the persons handwritten signature. How can I make sure that this picture was NOT recreated in MS Paint or Photoshop by someone else?
The answer is:
you can't! Therefore this way of prooving identity is useless.
You need to provide your users with digital signatures, put these in the certificate cache of your IE. If a user then clicks on the signing field, the private key is used to digitally sign the form - create a hash value of the form and encrypt it with the private key. After the form is send back to the server or you, you use the corresponding public key to decrypt the hash value and, as said above, if this succeeds, identity of the signer is proven.
THIS IS AN OVERSIMPLIFICATION! You might want to take a look at Adobe Reader Credentials.
Regards,
 Christian

How to create table control without wizard....???

Hello experts !!
Plz tell me how to create table control without wizard.
for sflight table.
Scenario 1
I have one screen like 1000.
There i have taken carrid, connid, fldate as criteria.
Now i want to display Planetype, Price, Seatsmax in the table control.
Scenario 2
i have two screens 1001, 1002.
in the screen 1001 i have taken carrid, connid, fldate as criteria and there is a Button.
when i will click the button it will show the price, planetype and seatsmax in the table control in the next screen, i.e 1002
plz help me out...
and how to save new record in the dictionary table from that table control....

Hi
see the sample programs and design accordingly
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
just refer to the link below
http://www.sapmaterial.com/tablecontrol_sap.html
step by step procedure with screen shots
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Regards
Anji

How to create table

plzz tell me how to create table in oracle forms 10g
gimme the code plzz

hi
please create a text item name it table and use the following code in when-button-pressed trigger.Now u can create table by any name.
BEGIN
     Forms_DDL(' create table ' || :table || '(n NUMBER)');
       IF NOT Form_Success THEN
            Message ('Table Creation Failed');
       ELSE
            Message ('Table Created');
       END IF;
END; Please mark it correct/helpful Thanks
sarah

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator

Follow below steps
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

How to create table with row type in smart forms

How to create table with row type in smart forms with out line type
please explain me the procedure

HI,
A table type describes the structure and functional attributes of an internal table in ABAP. In ABAP programs you can reference a table type TTYP defined in the ABAP Dictionary with the command DATA <inttab> TYPE TTYP. An internal table <inttab> is created in the program with the attributes defined for TTYP in the ABAP Dictionary.
A table type is defined by:
its line type, that defines the structure and data type attributes of a line of the internal table
the options for managing and accessing the data ( access mode) in the internal table
the key ( key definition and key category) of the internal table
The row type is defined by directly entering the data type, length and number of decimal places or by referencing a data element, structured type ( structure, table or view) or other table type. Or the row type can be a reference type.
for more info : http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
Internal table
Regards
Sudheer

ADF -how to create table binding when view object is no known until runtime

Similar Messages

Maybe you are looking for