ADF Input Text not showing

Hi All,
Can anyone help me out. I am using Jdev 10.1.3.3 and when I dragged the componet from Data Control as Input ADF W/ label and run the page the input text doesn't appear only the lable.
Thanks in advance

Maybe the component is set to read only in your page? If not , make sure the view object on which this component is based is updatable (or at least this particular attribute).
At least in 11g an input text will be just output text in case the VO is not updateable.

Similar Messages

ADF popup is not showing - Intermittent issue

Guys,
Once in a while popups inside the adf application are not showing up. have anybody faced this issue?
Though its rare, i would like to know the reasons behind this intermittent issue.
Any pointers/thoughts will be appreciated... Thanks

Popup if very problematic item in ADF.
There are 2 ways to invoke the popup correctly
1. Make sure that you don't have a combination of viewScope and backingbean scope in everything related to your popup
2. Or (and this is the best one) - don't use popup. Create a bounded task flow and call it from your task flow. You have an option to call it as inline popup.

Adf Input Text with formatted xml Content

Hi,
I have a requirements where I get an xml content in one line
as suppose <xml ><a><a1></a1><a2><a2></a><b></b></xml>
I want this Input text to render it proper fromat like
<xml >
    <a>
        <a1>
        </a1>
         <a2>
         <a2>
   </a>
   <b>
</b>
</xml>I tried to set wrap property to soft
but it is not affecting
Please tell me any component that will properly structure the input xml
How can I do this.

User, please tell us your jdev version!
There is no component AFAIK. You may want to try the rich text editor, but if I remember it correct it won't do what you want.
My solution would be to write a custom converter and format the code in the converter to show it then in the inputText.
Timo

[Help] Password input box NOT showing up at all.

The actual box used to type the password in just will not show up. My phone can only be turned on my swiping the screen up. Everything else shows up, the time, email and text noticications, but when I swipe the screen up all the way I am left with a dimmed background and the black bar that goes across the top of the screen. I've had a password on my phone for over 3 months and haven't turned it off.
I can't restart my phone because the power button is broken and sticks if pressed... meaning it will turn itself on and off continuously for hours on end until I wiggle it out of place.
Is there any way to fix this other than waiting... a full 24 hours, probably, since I just charged my phone, for the battery to die?
Solved!
Go to Solution.

NotApplicable wrote:
I can't restart my phone because the power button is broken and sticks if pressed... meaning it will turn itself on and off continuously for hours on end until I wiggle it out of place.
Is there any way to fix this other than waiting...
Reboot: With the BlackBerry device POWERED ON, using the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Try that and see if you password screen then appear correctly.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Text not showing in PDF created for print

After exporting an illustrator document I tred to make a high quality PDF for print but the text does not show in the PDF file.

Impossible to know. You have not provided any info about your document, what font you used, what appearances on the text, what PDF settings, what system or even what version of AI plus how you review the document. From the font simply not being allowed to be embedded to specific appearances not rendering correctly to unsuitable PDF settings there could be anything at work here. You need to be much more specific.
Mylenium

Non-button text not showing up in menu

Is it normal for text in a Blu-ray menu that is not a button to not show up in the menu once it is on a disc or disc image? This is the last issue I am having.
I have some text on a menu that is just text. I have had plain text in the past work perfectly, but this time around Encore isn't rendering it. In the past though, my motion menu footage was in compliant m4v format, and this time it's mp4 so that Encore would transcode it. Using m4v was causing red frames to show up in the footage.
Is there a way for me to fix this easily, either in Encore of Photoshop?

I feel really slow...
The only background in a multipage menu is the background in page 0.
When you add anything to the page 1 or 2 groups, it can only be a button.
So yes, the workaround to getting text that only shows on a single page is to put it in a button.
You told us everything we needed in the original post, except, of course, that it was a multipage - but the symptom made that an easy guess. Sorry a little slow on getting there!

ADF region does not show

Hi,
I have a jsff page that I want to add a region (via bounded task flow & corresponding jsff file).
When I add an existing task flow (that appears as region in another page) everything works fine.
However, when I add a newly created task flow, if does not show anything when the app runs. However, it shows fine in the JDev preview.
After having done this many times, I believe that the newly created task flow is fine (analogous to the existing one that works).
Any idea what can be wrong?
I am using JDeveloper 11,1,1,6.0

Yes I do have a default activity.
The issue tuned out to be about permissions and authentication. We just added ADF authentication; thus you have to added permissions to view these newly created resources (taskflows).
Given that this was the first tasfklow that was added after adding ADF authentication, we overlooked this.

Header text not showing up in browser

My h2 text is not showing up in the browser (IE). Also of concern is the bad formatting that appears when this page is opened in Chrome. Any thoughts?
http://moxiespeak.com/
THANK YOU!

Your CSS and JS links are all pointing to files on your hard drive.
e.g.
<link href="file:///C|/Users/christy/Documents/Moxie Speak 05 23 11/Moxie Speak Branding/Rejects/Final website/Original Template/site/css/reset.css" rel="stylesheet" type="text/css" />
should read something like
<link href="css/reset.css" rel="stylesheet" type="text/css" />

T42 (Type 2378) Rescue and Recovery text not showing up in GUI

I have a machine that I hit the IBM button to restore my system back to its factory settings. It loads up fine but when I hit the [Restore your system] it pulls up a new window and has 3 bullets I can select from, but there is NO text on the window. Not even the < Back or Next > or Cancel button texts are showing up. I need to restore it but I don't know which bullet to select and if I select a random one, the next screen pulls up but still no text. Any ideas?

Thank you! I had to change my fast preview settings. I chose OpenGL Active instead of Wired Frame. Although, I'll have to play around with it because I got an error message last night that said it caused the program to crash.

HELP! animated text not showing up in final render (after effects)

I'm using position and motion blur for my animated text. I changed the font several times to see if there was any license issues and there isn't. I also put a static text layer in the file and then rendered, and THAT text will show up, but moving text refuses to show up. What can be the problem? Please help!

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Note, especially the request for screenshots of the relevant panels, such as the Timeline panel and Composition panel.

Multiple Lines of Text not showing up

Hi,
Recently we have observed on a particular site in SharePoint farm that whenever we are adding list field of Multiline Text.
It is not showing up in list forms (New, Display, Edit). Test is Multiple Lines of Text field. This is happening on all the existing as well as new lists.
I searched for the issue but couldn't find any solution.
Please guide me on this issue. Appreciate your help.
Thanks,
Rahul Babar
ASP.NET, C# 4.0, Sharepoint 2007/2010, Infopath 2007/2010 Developer http://sharepoint247.wordpress.com/

Hi Rahul,
Per my understanding, the Multiple Line of Text column not showing up in all the form pages in one of your site.
I suggest you do as follows to troubleshoot this issue in your environment:
1. Is there any update or customization applied to this site recently?
2. Please inspect the HTLM source code of the Multiple Line of Text field in NewForm page to see if there is corresponding HTML code in the page. In my page, the HTML
code of the Multiple Line of Text field like this:
3. If the HTML structure exists, then it is probably a CSS issue, please check if there is custom CSS style applied to this site which would conflict with the built-in
style of the Multiple Line of Text field.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

CD Text not showing up on burned cd's.

When I burn a cd, the cd text is not showing up even though I have the include dc text option checked. Any suggestions?

iTunes has an option to burn CD Text, but it does not have the ability to read CD Text. If the CD Text is burned on the CD, then any of the ripping tools listed in this article will be able to read the CD Text.
If you don't have the time to look at that link here is a summary: almost all ripping tools except iTunes can read CD Text.

ADF visualization components not showing in a region

I have a task-flow of JSF fragments, when I visit a page with adf visualization components they are not showing. I call:
region.queueActionEventInRegion(getMethodExpression(methodExpression),
null, null, false, -1, -1,
PhaseId.ANY_PHASE);
They dont show even iif I call
AdfFacesContext.getCurrentInstance().addPartialTarget(getRegion());
Only loads when I collapse a panel - which suggests they are there, loaded. Just not showing.

Hi,
if you want to refresh a region then either you call the refresh method exposed on the region or configure the Task Flow binding refresh condition to #{1==} (for always to refresh) in addition to the PPR refresh.
The first of your method really has nothing to do with region refresh and is for a different usecase
Frank

Adf input text related

I have a "input text with list of values" field.
Is there a way to to ignore case in this field please? (currently if I enter a value as "test" it says it is not valid even though there is a value "TEST" available.)
Is there a property setting?
Thanks

i am not sure if this is supported fro af:inputTextlistofValues.. but you can try
1) having a content style as "text-transform: uppercase" which will transform the text entered in Uppercase.. and forces uppercase all the time
2) removing any validation that is applied to this component.. by removing the validator tag.. if its available.. as suggested above

How to enter local language in ADF Input Text?

Hai,
Iam using jdev 11g.
There is an Input Text in my jspx page.
I want to enter the data in that field according to the regional settings language.
can anyone please help.
Briston Thomas

hai,
In the database,the field is set as NVARCHAR2 .If i copy paste and commit the corresponding language word directly to database,it is showing correctly when fetching in to text field...If i directly paste the word in the text field and saved,the data is showing differenly after fetching from DB..Why is it happens..Is it related to DataBase settings?..please advise..

ADF Input Text not showing

Similar Messages

Maybe you are looking for