Adf region is not displaying anything

Hi,
I am using adf region to display the data.For this I have created one bounded task flow with page fragments.
In the page fragment I created one output tag to display something.this page fragment is dropped in task flow.
Then I made one JSP page and drag the task flow and drop it as the region.The problem is it not displaying any data.
I am using jdev 12. Can you please tell me whether I am doing anything wrong.
Thanks,
Harsh

What do you mean by
Then I made one JSP page and drag the task flow and drop it as the region.
Did you create a jspx page or a jsf page. Depending on the fragment type it only works on a jsf page (jsf 2.0 page). 12c default is create fragments as 'Facelets' which only work in jsf Pages. If you want to use a jspy page you have to create the fragment as 'JSP xml'.
Timo

Similar Messages

  • HT5429 maps on iphone 5 do not display anything

    Hi everyone. I recently bought a new iPhone 5 and I have a serious problem with my maps app. It does not display anything I search except the grid lines and pins. please help how can I fix it.  pls send the instructions at [email protected] Thank you in advance.

    It is not a good idea to put any kind of personal contact information in such a public forum.
    First, close the maps app. Double click the home button.  At the bottom, press and hold any app until a red circle appears on the top of each.  Tap the red circle on the Maps app.  Next, reset the phone:  press and hold the power and home buttons at the same time until the Apple logo appears.  Ignore the red slider if it appears.

  • Compaq 615 not displaying anything

    I was updating the Windows updates. then when It was displaying the message "do not turn off your computer. Windows is updating. " I mistakenly kicked the power pack cable and it removed it from the socket then the laptop turned off because I was using it with no bttry. When I switched it on its not displaying anything even the Windows f8 stage is not reached. how do I fix this problem. It's not getting in bios as well

    bpali2001 wrote:
    i have an adc 23 apple cinema hd display. that gets some power for the button backlights but no signal. i tried the dvi out with an other monitor. that gets no signal also. could resetting the PMU twice in a quick succession (accidentally) cause this problem?
    Can you answer BDAqua's last question please…
    BDAqua wrote:
    I believe we have a PSU or Logic Board problem, using the DVI monitor does alt key on power up bring up anything on the display?
    We need specific confirmation otherwise steps may be missed & nothing is resolved.
    We also need to know about what tones you hear on startup - are you hearing the normal startup tone or something else?

  • My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

    My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

    mrdctaylor wrote:
    Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
    Thanks!
    Apple have changed this setting with the Apple TV Software Update 5.1:
    About Apple TV (2nd and 3rd generation) software updates
    Feature
    Summary
    Shared Photo Streams
    Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
    AirPlay
    Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
    iTunes account switching
    Save multiple iTunes accounts and switch quickly between them.
    Trailers
    Search movie trailers. In the United States, see show times for local theaters.
    Screen savers
    New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
    Main menu
    Reorder icons on the second page by holding down the select button on the remote.
    Subtitles
    SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
    Network configuration
    Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
    Stability and performance
    Includes general performance and stability improvements.
    If you don't like this, you can leave feedback here: Apple Feedback

  • ST06 - detailed Analisys - OS log not displaying anything

    Hi Experts,
                   ST06 -> detailed Analisys -> OS log not displaying anything in my developement system. When I clickon the OSLog, it is giving the error message "<b>error message:Invalid Parameter
    Please check your Saposcol and your CCMS Agents</b>"
    I have already stopped and started the SAPOSCOL. even though it is not working still...
    Please help to resolve this isssue.
    Thanks,
    Madhuri.

    Hey Madhuri,
    Did you get your issue resolved ? I 'm also facing the same problem.
    If u hvae resolved the issue, do tell me how..
    Regards
    Rahat

  • ADF region does not show

    Hi,
    I have a jsff page that I want to add a region (via bounded task flow & corresponding jsff file).
    When I add an existing task flow (that appears as region in another page) everything works fine.
    However, when I add a newly created task flow, if does not show anything when the app runs. However, it shows fine in the JDev preview.
    After having done this many times, I believe that the newly created task flow is fine (analogous to the existing one that works).
    Any idea what can be wrong?
    I am using JDeveloper 11,1,1,6.0

    Yes I do have a default activity.
    The issue tuned out to be about permissions and authentication. We just added ADF authentication; thus you have to added permissions to view these newly created resources (taskflows).
    Given that this was the first tasfklow that was added after adding ADF authentication, we overlooked this.

  • Next Button in a Hide and Show Region is not displayed correctly

    I created a new button at the bottom of the region in a Hide and Show Region called [Next >]. The button is displayed to the right of the region. I want it displayed at the right end of the bottom of the region. The following is the button properties
    Name
    Button Name : NEXT_SIGNS
    Text Label/Alt: Next >
    Displayed
    Sequence            130
    Display in Region: Signs and Nameplates (1) 100
    Button Position:    Bottom of Region
    Button Alignment: Right
    Attributes
    Static ID:          
    Button Style:      Template Based Button
    Button Template: PA Button
    Button Type:       Hot
    Button Attributes:
    Action When Button Clicked
    Action:                 Submit Page
    Execute Validation: Yes
    Database Action:    No Database Action
    Conditions
    None
    Security
    None
    Configuration
    NoneWhy is this occurring and how can I resolve the issue?
    The following is the template of the hide and show region:
    <div class="hide-show-region" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES#>
      <div class="hide-show-top">
        <div class="hide-show-title">
    <div class="rounded-corner-region">
    <div class="rc-blue-top">      
    <div class="rc-blue-top-r">
              #TITLE#</div>
    </div>
    </div>
           <a style="margin-left:5px;" href="javascript:hideShow('region#REGION_SEQUENCE_ID#','shIMG#REGION_SEQUENCE_ID#','#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif','#IMAGE_PREFIX#themes/theme_2/rollup_minus_dgray.gif');" class="t1HideandShowRegionLink"><img src="#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif"
      id="shIMG#REGION_SEQUENCE_ID#" alt="" />Click on arrow to enter/hide  information for signs and/or nameplates</a></div>
        <div class="hide-show-buttons">#CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</div>
      </div>
      <div class="hide" id="region#REGION_SEQUENCE_ID#">#BODY#</div>
    </div>APEX version 4.1
    DB version 10g Rel 2
    PLEASE HELP!!
    Robert
    http://apexjscss.blogspot.com

    I created a new button at the bottom of the region in a Hide and Show Region called [Next >]. The button is displayed to the right of the region.I only see it displayed to the right of the region in Firefox (Safari and IE8 showed it above the sub-regions). Not obvious to me why this is the case (it's usually IE that does it's own thing).
    I want it displayed at the right end of the bottom of the region.Button position Bottom of Region causes an anonymous HTML table containing the button(s) to be generated after the <tt>#BODY#</tt> placeholder in the region template. Your Hide/Show region template didn't have a <tt>#SUB_REGIONS#</tt> placeholder so by default the sub-regions were rendered after the <tt>#BODY#</tt> and the "Bottom of Region" button container (don't know if this is the intended behaviour or a bug). Adding <tt>#SUB_REGIONS#</tt> before <tt>#BODY#</tt> in the template gets things in the right order (button after sub-regions):
    <div class="hide-show-region" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES#>
      <div class="hide-show-top">
        <div class="hide-show-title">
    <div class="rounded-corner-region">
    <div class="rc-blue-top">      
    <div class="rc-blue-top-r">
              #TITLE#</div>
    </div>
    </div>
           <a style="margin-left:5px;" href="javascript:hideShow('region#REGION_SEQUENCE_ID#','shIMG#REGION_SEQUENCE_ID#','#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif','#IMAGE_PREFIX#themes/theme_2/rollup_minus_dgray.gif');" class="t1HideandShowRegionLink"><img src="#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif"
      id="shIMG#REGION_SEQUENCE_ID#" alt="" />Click on arrow to enter/hide  information for signs and/or nameplates</a></div>
        <div class="hide-show-buttons">#CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</div>
      </div>
      <div class="hide" id="region#REGION_SEQUENCE_ID#">
        #SUB_REGIONS#
        #BODY#
      </div>
    </div>Firefox is still showing the button to the right of the sub-regions. I'm assuming that this has something to do with everything in this theme being floated left (for reasons that escape me), so we'll try to clear the button container using CSS. The table doesn't have an ID or class so try an adjacent sibling selector using the ID of the preceding sub-region:
    #nameplates-name+table {
      clear: both;
    }Finally, the button alignment was set to "Left", so I changed it to "Right".
    Seems to be working in IE8 (all I have access to at present).
    Edited by: fac586 on 30-Nov-2012 20:10
    Fixed CSS selector syntax.

  • ADF components do not display Chinese simplified (showing English instead)

    Dear All
    I am having a problem getting ADF components to display in Chinese simplified language. Buttons display in Chinese correctly however components such as: < af:table > (the previous and next values do not display in Chinese, again in English only).
    I have tried it under Japanese and these components show Japanese.
    Any ideas on what the problem may be caused by would be greatly appreciated.
    Best regards
    Andrew Och

    Actually I found the problem.
    It seems that the language resource bundle has the incorrect name. Renaming:
    oracle.adfinternal.view.faces.ui.laf.oracle.desktop.resource.BLAFBundle_zh_CN.java
    to
    oracle.adfinternal.view.faces.ui.laf.oracle.desktop.resource.BLAFBundle_zh.java
    resolved my problem.

  • The control of adf media does not display even the Control attribute is set

    Hi
    I am trying to play a clip in a jspx page. I use an ADF media to embed the file and play the file by quicktime. I set the control display attribute to "all" or "typical" but the control does not display when the browser(FF) display the clip.
    Can anyone help me?
    Thanks

    try adding mime-mapping in web.xml. Just a suggestion and I haven't tried this control.

  • TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

    The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Onboard Graphics Card Not Displaying Anything

    I got a free MS-7613 (Iona-GL8E) motherboard from my friend 's friend which was fully working, he upgraded his motherboard and no longer wanted/needed it. This is the first PC I have ever started to build, I've worked on the, before and know a reasonable amount about them, but the problem I have with this is, the onboard graphics card doesn't display anything. I tried via VGA and HDMI on a monitor and TV, both outputted nothing. The wire and monitor definitely work. The motherboards seems to work fine, it used to beep when it had no RAM, since then I bought RAM and it's been fine. I had a graphics card in but removed it as it also displayed nothing. All the USB drives work and it turns on fine, it just display nothing. Could it be because it had a graphics card in perviously and doesn't display anything because of that? Any help would be great! 

    Hi, "Beware of greeks bearing gifts."  Obviously there are reasons why you have ended up with a hand-me-down.   One might be a bad motherboard graphics processor. You need to provide more information about your hardware configuration.  Additionally, contact your friend and find out what HP product was the motherboard installed in so we can look for specific information.   Post back when you have more information.

  • Lumia 920 Not Displaying Anything

    Hey everybody! I was trying to hard reset my phone when all of a sudden it got bricked. It got stuck on the spinning cog wheels for a good two hours, so I decided that I might as well try to unbrick it with this guide: Tip: How to fix a bricked Nokia Lumia 920 | Windows Phone Central Well, that didn't go all that great. It turns out now my phone won't even display anything. It's just a black screen, a plain black screen. When I plug into the computer it still makes the noise but other than that nothing will else will work. Is there anything I could try for now or is a complete goner? Someone else had the same issue and I'll quote him, as it's a bit more descriptive: "Hi guys,
    I've a Nokia Lumia 820 who is bricked and have nothing displayed on screen, no spinning gears, no lighting... So I've tried the step here and the Nokia is detected by Windows (tried on 7 x64, 8 x64, and a XP VM), but strangely detected and no detected (like plug-in and plug-out) and then the Volume Down + Power don't do anything.
    Some one have idea to make my Nokia working again... (i've an old iPhone for now... help me please ! )
    Etienne"
    That was a comment made at the very bottom of the guide. I'm having that same issue. Thanks for any help that I can get.

    The only solution left seems to be a visit to Nokia Care. Be informed that you have already voided Warranty by following unauthorised process mentioned in the link pasted by you ..BTW, there are quite a few suggestions on THIS Forum (to resolve your original problem) that you would have tried without voiding the Warranty.

  • ADF - HierarchyViewer - Children not displayed

    Hello,
    I want to use the ADF hierarchy viewer component. Following some tutorials on the net, I tried to realize mine.
    1.I create the component from a VO (call it, DepartementsVO) with their children (call them ManagersVO and EmployeesVO).
    2.I test, all datas are well displayed. I can collapse and expand all the nodes. It works :)
    3.But there are too much data. So, I decide to set the "Descendent levels" attribute to 0. I reload the page. Only the root level is expanded. It works. :)
    4.But when I click on the "expand" button, a blue ring appears and the component is disabled, the time to retrieve the data of the children (I think) but it is infinite. I have to reload the page to visualize the children datas. It does not work. :( The collapse works fine.
    On step 4, I have no errors, no trace. The problem is on the client side perhaps. I used IE9 and Firefox 19. Do you have any idea on what is wrong ?
    I am on jdev 11.1.2.2.0 and the component is displayed in a dynamic region.

    After a day of test,
    I got this behaviour when DepartmentVO has more of one child.
    The case DepartmentVO -> ManagerVO is ok with descendent level set to 0.
    The case DepartmentVO -> EmployeeVO is ok with descendent level set to 0.
    But the case DepartementVO -> ManagerVO and EmployeeVO is KO with descendent level set to 0.
    In the bindings of my page definition, I have two items in the accessors : ManagerVO and EmployeeVO.
    >
    <tree IterBinding="IlotsVO1Iterator" id="IlotsVO1">
    <nodeDefinition DefName="com...DepartmentVO" Name="DepartmentVO10">
    <AttrNames>
    <Item Value="Id"/>
    <Item Value="Name"/>
    </AttrNames>
    <Accessors>
    <Item Value="ManagerVO"/>
    <Item Value="EmployeeVO"/>
    </Accessors>
    </nodeDefinition>
    >
    When I delete one, by example ManagerVO, it works fine but the managers are no more displayed (logic).
    It looks like a bug and I do not find a workaround for this.
    Edited by: Antoine Fieulaine on 20 mars 2013 09:30

  • Macbook pro does not display anything

    Model is Macbook Pro 15" Mid 2009 Unibody
    Mountain Lion
    Modifications:
    CD drive replaced with additional 500 GB Hard Drive
    One of the 2 GB RAM chips replaced with a 4 GB chip
    Earlier today I was browsing the internet on my MBP and suddenly the laptop froze, the screen froze, the mouse and keyboard were not responding at all, which eventually led me to have to force shut it down (by holding the power button). When I tried to turn the laptop back on it started up (as in I could hear the fan and the white light came on) but there was no display and then 4-5 seconds after it turned off and then started up again by itself and stayed on, still no display on the screen at all, its off and the keyboard doesn't seem to be responding either which I figured by trying to press the caps lock button to see if the green light comes on in which it didn't.
    I have tried pressing the Ctrl+Shift+Alt+Power button and then turning the laptop on but the same problem still persists. The laptop starts up, turns off and then starts up again and then stays on with nothing displayed on the screen and no response from the keyboard. The start up chime also doesn't occur. I am unable to start the laptop in Safe mode or any other mode that requires me to hold a button when powering up as the laptop turns off after 4-5 seconds and then starts up again. I have looked online to find anyone with a similar problem but can't seem to find any posts regarding this.
    The laptop has not been dropped or anything, neither had it experienced any liquid damage. It has been running smoothly before the problem that occured earlier. I am in desperate need of my Macbook Pro and there doesn't seem to be any Genius Bar appointments available in the next 7 days in any Apple store near to me (Central London).
    Any help or advise will greatly appreciated.
    Khal

    Make that genius bar appointment and wait those seven days.  That is your best option to get it diagnosed properly (for Free).
    Ciao.

  • Dbms_output.put_line not displaying anything

    I am running the below code (ssn_run.sql) using sqlplus 10.2.0.1.0 on my windows XP professional client PC.
    The database is a Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit running on Solaris
    I cracked my head for about one hour but couldn't figure out this :
    accept input_ssn prompt 'Enter SSN :'
    set feedback on
    set serveroutput on
    set echo on
    set term on
    set heading on
    set pagesize 0
    set linesize 10000
    set verify on
    undefne sdate input_ssn
    col sdate new_value sdate
    col input_ssn new_value input_ssn
    select to_char(sysdate,'YYYYMMDD') sdate from dual;
    spool C:\PERSON_DATA_&&sdate._&&input_ssn..TXT
    select 'REPORT GENERATED ON : '||SYSDATE FROM DUAL;
    begin
    select personid into v_personid from person where SIN = '&&input_ssn';
    INSERT INTO PERSON_OLD
    (PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME, AKANAME, DCFM,
    IROWID, SUFFIX, PTYPE, OLD_SSN)
    SELECT PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME,
    AKANAME, SIN FROM PERSON WHERE SIN = '&&input_ssn';
    INSERT INTO MEMBER_OLD
    (CLNT, MKEY, PERSONID, MEMNO, OLD_MEMNO)
    SELECT CLNT, MKEY, PERSONID, MEMNO,MEMNO
    FROM MEMBER WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
    UPDATE PERSON SET FNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS'),
    LNAME = TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
    UNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS')||' '||TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
    AKANAME=NULL WHERE SIN = '&&input_ssn';
    UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
    for i in(select personid person_other from person_relation where relpersonid in(select personid from
    person where PERSONID = v_personid))
    loop
    dbms_output.put_line('i.person_other is : '||i.person_other);
    UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID = i.person_other;
    end loop;
    EXCEPTION
    WHEN OTHERS THEN
         ecode := SQLCODE;
         emesg := SQLERRM;
         dbms_output.put_line('Error while data scrubbing: Error code is : ' || ' - ' || ecode);
         dbms_output.put_line('Error message is :' || ' - ' || emesg);
    end;
    spool off;
    set term on
    set feedback on
    set HEADING on
    set verify on
    --End of code
    The SELECT statement that comes in the for loop should return data as v_personid has a value. (I tested this by a select statement)
    However, I am just not able to display the line which comes in the inner loop :
    dbms_output.put_line('i.person_other is : '||i.person_other);
    The result of this dbms output put_line neither shows up on the screen, nor it gets written to the spool file...I am stumped with this...
    The other dbms_output put_lines that display error displays okay, but not the one in the inner loop.... Can someone help me out if you see any obvious issues here........
    Also my UPDATE MEMBER statement inside the for loop doesn't do anything whereas it was supposed to update a row !!
    Thanks

    You could display the number the query return by adding;
    v_count number;After you assign v_personid;
    dbms_output.put_line('v_personid  is : '||v_personid );
    (select count(*)
    into v_count
    from person_relation
    where relpersonid in(
       select personid
       from person
       where PERSONID = v_personid)).
    dbms_output.put_line('v_count  is : '||v_count );

Maybe you are looking for