ADF Server Domain Requirement on Oracle WLS 11g

Hi All....
I am new to ADF
I would like to know if it is necessary to create an ADF server domain, or perform ADF specific configuration on WLS in order to deploy and run ADF web Apps on Oracle Weblogic Server 11g?
Or can ADF web apps be deployed directly to the Admin Server without extra server configuration?
I am migrating an ADF web app from WLS10g to WLS11g.
Web App runs perfect on 10g...Though 10g contains an ADF server domain.
I have deployed the Web app directly onto the Admin Server on 11g...(NO ADF Server Domain)
The Web App runs, but does not display some components (buttons, tables, etc) on some pages. I am not seeing any errors or exceptions either.
I think this may have to do with the Environment I am running the App in.
Can you please guide/advise me as to what needs to be configured and setup on WLS for ADF to be deployed and run successfully on 11g?
Thanking you in advance.

Hi dvohra21
I am not sure if ADF Runtime is installed....
I can however see the following libs installed and Active on the WLS console
adf.oracle.businesseditor(1.0,11.1.1.2.0)
adf.oracle.domain(1.0,11.1.1.2.0)
adf.oracle.domain.webapp(1.0,11.1.1.2.0)
oracle.adf.dconfigbeans(1.0,11.1.1.2.0)
oracle.adf.desktopintegration(1.0,11.1.1.2.0)
oracle.adf.desktopintegration.model(1.0,11.1.1.2.0)
oracle.adf.management(1.0,11.1.1.2.0)
Is this correct or am I still missing anything?
Your assistance is much appreciated

Similar Messages

Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit

1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
2.I have followed the steps too as described here in these two forum links:
1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
3.I am giving my installtion steps..
I have installed JDK: 1.7.0.
I have succesfully installed web logic version wls1035_generic.jar.
I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
I have also installed patch version 11.1.1.3.0.
But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
I have also checked the path ..It doesnt contains any special characters.
Any ideas???

Hi John,
As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
1). Installed JDK 1.6u29
2). Installed WebLogic 10.3.3
3). Installed FMW 11.1.1.2
4). Installed FMW 11.1.1.3 Patch
Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
Deepak Jha

Migrate a webservice built in WebLogic Server 8.1 to Oracle WLS 10.3

Hi
I have built a webservice in a application server BEA WebLogic Server 8.1 SP6
Now I want to migrate it to a application server Oracle WebLogic Server 10.3
My problem is the webservice uses a file build.xml that contains some commands that are deprecated in version 10.3
These deprecated commands include in the file build.xml are :
<target name="generate-autotype">
<*autotype* wsdl="${CLIENT_BUILDER_RESOURCES}/${webservice}.wsdl"
targetNamespace="http://webservices/${modulo}/${webservice}.wsdl"
packageName="webservices.${modulo}"
destDir="${CLIENT_BUILDER_OUTPUT_DIR}"
keepGenerated="false"/>
<move file="${CLIENT_BUILDER_OUTPUT_DIR}/types.xml" todir="${CLIENT_BUILDER_BUILD_DIR}"/>
</target>
<*source2wsdd* javaSource="${SICAS_SRC}/webservices/${modulo}/${clase}.java"
sourcePath="${CLIENT_BUILDER_OUTPUT_DIR}"
typesInfo="${CLIENT_BUILDER_BUILD_DIR}/types.xml"
ddFile="${CLIENT_BUILDER_BUILD_DIR}/web-services.xml"
mergeWithExistingWS="true"
serviceURI="/${webservice}"
targetNamespace="http://webservices/${modulo}/${webservice}.wsdl"
classpathref="source2wsdd.class.path"/>
</target>
<target name="generate-ear">
<*wspackage* output="${CLIENT_BUILDER_BUILD_DIR}/sicasws.ear"
codecDir="${CLIENT_BUILDER_OUTPUT_DIR}"
webAppClasses="webservices.${modulo}/${webservice}"
overwrite="false"
ddFile="${CLIENT_BUILDER_BUILD_DIR}/web-services.xml"
warName="sicasws.war"/>
</target>
I need to compile my webservice in Oracle WebLogic 10.3
Before compile it, I must change the file build.xml of the webservice
Can anybody tell me how can migrate this webservice to Oracle WebLogic Server 10.3?
Thanks a lot
Josep Maria

Hi Josep,
WLS8.1 webservice needs to have all the WebService annotations when we migrate it to WLS9.x onwards.
Here is a Simplest way which can be used....As you already have the WSDL generated from your WLS8.1 WebService ....So Use WSDLC Task to genarate the Annotated WebService from it ...and then Copy and paste the Method Implementations from your OLD Service to the Newly Generated Service....
How to do it?
Answer: Here is have developed a Step by Step procedure to do it...Please have a look...
http://jaysensharma.wordpress.com/2009/12/18/how-to-build-a-webservice-from-a-wsdl/
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Hardware requirement for Oracle RAC 11g R2 on solaris

Hi Experts,
1. can we use the below server for RAC setup,please note that system model is different
bash-3.00# uname -a
SunOS KCHJSAPP004 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5120
bash-3.00# uname -a
SunOS KCHJSAPP007 5.10 Generic_139555-08 sun4v sparc SUNW,T5140
2. see below the cyrrent version of OS.we will update first one with patch 7 and make both version similar.is that ok or we shold upgrade with latest patch?
bash-3.00# more /etc/release
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
bash-3.00# more /etc/release
Solaris 10 5/09 s10s_u7wos_08 SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
Thanks,
Rasin M

check this note on MOS:
How to find RAC certifications in MOS Certification Tab [ID 1053954.1]
hth

Steve Muenchs "Dynamic JDBC" on WLS 11g (10.3.1)?

Hi,
I try to run Steves Example "11g Dynamic JDBC Credentials for Model 1, Struts, Trinidad, and ADF Faces Rich Client" on Standalone WLS 11g (10.3.1) but it doesn't works... on integrated WLS it runs without problems. The WLS-Log shows:
Modul: oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack
Message: Failed to create config mbean.
details: java.lang.Exception: oracle.mds.core.MetadataNotFoundException: MDS-00013: No Metadate for Metaobject "/META-INF/adf-config.xml" found.
Does somebody have the example to run brought? Or if new settings are necessary for the example on WLS 11g?
Kind regards
Martin

Hi,
since Steve's solution has nothing to do with the adf-config, I suggest you create a simple testcase that reproduces the problem. It appears as if the ADF binding is not set up properly
Frank

Deploying ADF Portlets into WLServer (Oracle Portal 11g Domain)

Hello,
i'm trying to deploy an ADF application (portlets) to be consumed in Oracle Portal 11g as WSRP.
I try to deploy it from Jdevloper 11g directly to WLServer, but i got the following error in Jdeveloper deployment log.
[12:17:04 PM] Deploying Application...
[12:17:19 PM] [Deployer:149191]Operation 'deploy' on application 'AcssADF' is initializing on 'WLS_PORTAL'
[12:17:21 PM] [Deployer:149193]Operation 'deploy' on application 'AcssADF' has failed on 'WLS_PORTAL'
[12:17:21 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AcssADF on cluster_portal.: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false]..
[12:17:21 PM] Weblogic Server Exception: weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false].
[12:17:21 PM] See server logs or server console for more details.
[12:17:21 PM] weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false].
[12:17:22 PM] #### Deployment incomplete. ####
[12:17:22 PM] Deployment Failed
****************When i check ServerLog i have the following error stack: *****************
Failure occurred in the execution of deployment request with ID '1257852324678' for task '3'. Error is: 'weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false].' weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false]. at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
*************** The file weblogic-application.xml has the following contents: **************
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<weblogic-application xmlns="http://www.bea.com/ns/weblogic/weblogic-application" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd">
<listener>
<listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
</listener>
<listener>
<listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
</listener>
<library-ref>
<library-name>adf.oracle.domain</library-name>
<implementation-version>11.1.1.1.0</implementation-version>
</library-ref>
<library-ref>
<library-name>
oracle.webcenter.skin
</library-name>
<specification-version>
11.1.1
</specification-version>
</library-ref>
</weblogic-application>
Thanks,
Pedro Ribeiro

Hi Pedro
Make sure that the Domain on which you are deploying this application has the module loaded/deployed by name "oracle.webcenter.skin". Within your domain/config/config.xml file you should have this module loaded:
<library>
<name>[email protected]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>C:\oracleWebCenter11111\jdeveloper/webcenter/modules/oracle.portlet.server_11.1.1/oracle.webcenter.skin.ear</source-path>
<deployment-order>300</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
</library>
When you created this WLS Domain, did you checked the right facets in the first couple of screens or did you just created a bare WLS Domain. Looks like mostly you may not have the above module, because the error stack trace does complain about this:
Unresolved application library references, defined in weblogic-application.xml: Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false
Incase if this module is deployed, make sure that the version is correct and matches with the one defined in weblogic-application.xml file.
Another possibility. Is this is CLUSTER Domain...? If YES, then deploy your app only to managed server and not admin server, because by default all modules are deployed only to cluster(managed servers) and not admin server.
Ravi Jegga

Which database driver is required for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server

Hi,
i am trying to configure JDBC with weblogic. Can any one tell me which deriver needs to be selected for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server.
if i use BEA oracle Driver (Type 4) version 9.0.1, 9.2.0,10,11, i find error (see snap:2)
Connection test failed.
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: hdyhtc137540d weblogic.jdbc.base.BaseExceptions.createException(Unknown Source) weblogic.jdbc.base.BaseExceptions.getException(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.open(Unknown Source) weblogic.jdbc.base.BaseConnection.connect(Unknown Source) weblogic.jdbc.base.BaseConnection.setupImplConnection(Unknown Source) weblogic.jdbc.base.BaseConnection.open(Unknown Source) weblogic.jdbc.base.BaseDriver.connect(Unknown Source) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505) c om.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConn ectionConfiguration(CreateJDBCDataSource.java:369) sun.reflect.GeneratedMethodAccessor 826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...
and
when i use oracle's driver (thin) version 9.0.1, 9.2.0,10,11, i find error
Connection test failed.
Io exception: The Network Adapter could not establish the connection oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:10 1) oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112) oracle .jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173) oracle.jdbc.drive r.DatabaseError.throwSqlException(DatabaseError.java:229) oracle.jdbc.driver.DatabaseE rror.throwSqlException(DatabaseError.java:458) oracle.jdbc.driver.T4CConnection.logon( T4CConnection.java:411) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnectio n.java:490) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202) oracle .jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33) oracle.jdbc. driver.OracleDriver.connect(OracleDriver.java:474) com.bea.console.utils.jdbc.JDBCUtil s.testConnection(JDBCUtils.java:505) com.bea.console.actions.jdbc.datasources.createjd bcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:36 9) sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...

i am finding this error when i click on Test Configuration button to test the connection wth oracle DB

Oracle Application Server 10.1.3.2 or Oracle Weblogic 11g

Hi
I am trying to find a roadmap for the above servers. Our company is currently looking at upgrading to one of the two from 10.1.2.
We have already got the application to run on 10.1.3.2 and another team is trying to upgrade to Oracle Weblogic 11g.
What do you recommend we do?
Will all new servers only be Oracle Weblogic 11g? Or can we expect releases of Oracle App Server?
Also where can I find a roadmap of this?

Hi
I cannot make any officially statement but my gut feeling is down the line Oracle will use Weblogic Server as their core application server in place of their own Oracle Application Server. The main reason being the SAO 11g suite using WLS as the base server. Infact one of the reasons Oracle bought BEA is because of the Weblogic Server product. So I would recommend putting the effort in upgrading your applications and existing domains to WLS instead of Oracle Application server subject to your actual type and nature of applications. Any BPEL, SOA, WebServices can now be deployed on WLS. If any of your exisitng legacy applications deployed on Oracle App Server cannot be deployed on WLS, then check with Oracle Product Mgmt team about the specifics of those apps roadmap regarding app serves. Hope this helps.
Thanks
Ravi Jegga

Install Oracle form 11g requirment

hi,
i want to install oracle form and report 11g ,
but i don't know what package must be install
plz help

Are you installing a Developer instance of Oracle Forms 11g or an Application Server instance of Oracle Forms 11g? The processes for each are different.
The best installation instructions I've found for a Developer Instance is *How to Install Fusion Middleware 11.1.1.1/11.1.1.2 Forms and Reports Only [ID 854117.1]*. This is a My Oracle Support document, so you must have a My Oracle Support account to get it. If you don't have a My Oracle Support account, just follow the "Quick Installation Guides" that come with WebLogic Server (WLS) and Oracle Fusion Middleware (FMW).
Go to the Oracle WebLogic Server Downloads page and download the Oracle WebLogic Server 11gR1 (10.3.2) - Package Installer. The file should be: wls1032_win32.exe. This is the minimum configuration of WLS needed to run FMW by a developer.
Next, go to the Oracle Forms Services 11g page and click on the "Downloads" tab and download the Portal, Forms, Reports and Discoverer (11.1.1.2.0) or (11.1.1.3.0). This is a Large download.
Once you have the needed software downloaded, run the WLS installer. Just follow the prompts and don't run the "Quickstart" at the end of the installation. Next, start the FMW installer. Follow all the prompts until you get to the *"Specify Installation Location"* screen. Make sure you write down directory locations listed on this screen. You can keep the default locations or you can change the Oracle Home Directory, Oracle Instance Location and Oracle Instance Name. I don't recommend you change the Oracle Middleware Home Location or the Weblogic Server Location. Also, make sure you record the WLS User ID and Password as you will need these each time you start the WLS process.
Next, on the Configure Components screen, select only the Oracle Forms and Reports server components, the Oracle Forms and Reports builder development tools, Management Components and Oracle HTTP Server system component. Then just follow the remaining prompts (you may need to configur a proxy, so check for this before you bypass this step). Once the Configuration Process is complete you will need to configur the Environment Variables so Forms knows whe re everything is. Most notably, you'll need to set the TNS_ADMIN variable so Forms can find your TNSNAMES.ora. You can also setup environment variables to bypass the WLS log-in each time you start the WLS services. These variables are: WLS_USER and WLS_PW.
You should be ready to start the WLS and Forms services at this point and use the Forms and Reports builders. At a minimum, you will need to start the Admin Server for Weblogic Server Domain and run the Start Weblogic Server in the Forms Services folder.
If you are performing an Application Server install, I can't help you with this as I have not done this type of installation. :-)
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Nov 10, 2010 9:38 AM

Error While Deploying ADF BC JSF Application on Oracle WebLogic Server 10.3

Hi All,
I am Deploying ADF BC JSF Application on Oracle WebLogic Server 10.3
My JDeveloper Version is - JDeveloper10.1.3.0.4
I followed Following Links for Deployment
http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/wls/wls.html
http://blog.fekw.de/2008/08/23/howto-install-adf-10-runtime-and-deploy-adf-bc-app-to-oracle-weblogic-103-running-on-linux/
I am Getting Following Error
java.lang.NoClassDefFoundError: oracle/xml/parser/v2/XMLParseException
 at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.<clinit>(ADFPhaseListener.java:463)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
 at java.lang.Class.newInstance0(Class.java:355)
 at java.lang.Class.newInstance(Class.java:308)
 at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:711)
 at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:400)
 at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:328)
[ServerConnectionImpl.close():334] : Closing DM connection
[ServerConnectionImpl.close():354] : Unregistered all listeners
Thanks
Vijay Chavan

My bc4j.conf file is like bellow and my datasource name is expertDS
<BC4JConfig>
<AppModuleConfigBag>
<AppModuleConfig name="DeptAMLocal">
<AppModuleJndiName>model.ent.DeptAM</AppModuleJndiName>
<DeployPlatform>LOCAL</DeployPlatform>
<JDBCName>expert</JDBCName>
<ApplicationName>model.ent.DeptAM</ApplicationName>
<jbo.project>Model</jbo.project>
</AppModuleConfig>
<AppModuleConfig name="DeptAMEmbeddedAS">
<jbo.internal.embedded>true</jbo.internal.embedded>
<JDBCDataSource>jdbc/expertDS</JDBCDataSource>
<ApplicationPath>current-workspace-app</ApplicationPath>
<ConnectionPort>23891</ConnectionPort>
<AppModuleJndiName>DeptAMBean</AppModuleJndiName>
<HostName>localhost</HostName>
<java.naming.security.authentication>simple</java.naming.security.authentication>
<java.naming.security.credentials>
<![CDATA[{904}05DDD90D64C79A7BC508C94B403DD81551]]>
</java.naming.security.credentials>
<java.naming.security.principal>oc4jadmin</java.naming.security.principal>
<DeployPlatform>EjbIas</DeployPlatform>
<jbo.server.internal_connection>jdbc/expertCoreDS</jbo.server.internal_connection>
<ApplicationName>model.ent.DeptAM</ApplicationName>
</AppModuleConfig>
<AppModuleConfig name="DeptAMAS">
<jbo.ampool.maxinactiveage>300000</jbo.ampool.maxinactiveage>
<AppServerConnectionName>weblogic</AppServerConnectionName>
<AppModuleJndiName>DeptAMBean</AppModuleJndiName>
<DeployPlatform>EjbIas</DeployPlatform>
<jbo.ejb.txntimeout>86400</jbo.ejb.txntimeout>
<DtMiddleTierDeploymentProfile>../ModelMiddleTier1.deploy</DtMiddleTierDeploymentProfile>
<jbo.security.enforce>Test</jbo.security.enforce>
<jbo.ampool.maxpoolsize>600</jbo.ampool.maxpoolsize>
<ApplicationName>model.ent.DeptAM</ApplicationName>
<DtDeploymentProfile>../ModelEJB1.deploy</DtDeploymentProfile>
<jbo.ampool.doampooling>false</jbo.ampool.doampooling>
<java.naming.security.authentication>simple</java.naming.security.authentication>
<DtCommonDeploymentProfile>../ModelCommon1.deploy</DtCommonDeploymentProfile>
<JDBCDataSource>jdbc/expertDS</JDBCDataSource>
<jbo.server.internal_connection>jdbc/expertCoreDS</jbo.server.internal_connection>
<jbo.ampool.minavailablesize>0</jbo.ampool.minavailablesize>
<ApplicationPath>BackBoneEJB</ApplicationPath>
<jbo.ampool.monitorsleepinterval>10000</jbo.ampool.monitorsleepinterval>
</AppModuleConfig>
</AppModuleConfigBag>

Creating Domain stuck at 0% -Oracle PFRD 11g - Windows 7 64-bit -laptop

Someone can help me?
I installed Oracle Portal, Forms, Reports and Discoverer on Win7.
I have install:
jdk 1.7.0 64bit
Oracle db 11g (64bit)
Oracle client 11g (32bit)
Oracle Weblogic 1035 (wls1035_generic.jar)
Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.2.0.0_64)
when I configure the "Configuring the Classic Instance" under the "Oracle Classic 11g-Home1". It's always pending in "Creating the domain" . No any Error information.
the related log information:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dll
DEBUG : Loading DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dll
I tryed the method of "short PATH",but it's still stuck at 0%.

Hi, I also had some troubles on the installation, but found some good resources how2 solve them:
-> Control Panel – System – Advanced System Settings:
) Remove the (x86) from PATH environment variable: according to MyOracleSupport Note:
Installing Forms And Reports On Windows Fails with "Starting the Admin_Server timed out" [ID 953350.1]
) Remove the "QTJAVA" parts from CLASSPATH: according to
http://ora-soa.blogspot.com/2011/06/error-javajre6libextqtjavazip-was.html
) completely remove the PATH, LD_LIBRARY_PATH according to
http://download.oracle.com/docs/html/E18558_01/fusion_requirements.htm#BABDICGE
and the MyOracleSupport Note
EM Fails to Start After Config with BEA-149205 Failed to initialize the application 'em' [ID 1310884.1]
Those 3 tips helped me in getting the WLS and Forms and Reports 11gR2 installed.
( In fact, everything except the reports builder runs fine now. but this is an extra topic,
you can find it multiple times in this forum)
kind regards, Martin
Edited by: alm82wi on Dec 19, 2011 2:23 PM

Oracle BI 11g: Error at the step - "Creating BI Server System Components"

I am attempting to install Oracle BI 11g on a Windows VM. The installation process completes successfully. However, the configuration process errors out at the step - Creating BI Server System Components. The last entry in the install log is as below:
[2010-09-24T18:26:12.107+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 26] [ecid: 0000Ih3l5E00vlx6wBedMG1Cb79200000H,0] Install handler params :-componentName coreapplication_obis1 -componentType OracleBIServerComponent -biApplicationName coreapplication -fmwConfigPath C:\Middleware\user_projects\domains\bifoundation_domain\config\fmwconfig -appServerUsername <Secure value. Cannot be logged> -appServerPassword <Secure value. Cannot be logged> -appServerAdminPort 7001 -appServerManagedPort 9704 -systemAdministratorUsername <Secure value. Cannot be logged> -systemAdministratorPassword <Secure value. Cannot be logged> -repositoryPassword <Secure value. Cannot be logged> -biServerRepositoryFile SampleAppLite.rpd -biPresentationServicesCatalogName SampleAppLite -biPresentationServicesCatalogZipFileName SampleAppLiteCatalog.zip -biSchedulerSchemaUser <Secure value. Cannot be logged> -biSchedulerSchemaPassword <Secure value. Cannot be logged> -actionFrameworkWorkflowServer http://host-name:7001 -actionFrameworkWorkflowService ANALYTICS -actionFrameworkWorkflowSystem obiaftests -databaseType Microsoft SQL Server -connectString sqlservername:port:db -autoCreatePorts -biServerPort 9703 -biServerMonitorPort 9701 -biPresentationServerPort 9710 -biClusterControllerPort 9706 -biClusterControllerMonitorPort 9700 -biJavaHostPort 9810 -biSchedulerPort 9705 -biSchedulerMonitorPort 9708 -biSchedulerScriptRPCPort 9707 -portRangeStart 9700 -portRangeEnd 10000 -skipDomainProvisioning true
The resource utilization seems to be normal. Netstat confirms that all of the above ports are free. Since there is no explicit error message in the log, we are unable to decipher the exact source for this error.
Virtual Machine details: Intel Xeon @ 2.67 GHz, Windows Server 2003 SP2, 4GB RAM, 50GB HDD, Static IP
Oracle BI Schema DB: MS SQL Server
Any inputs on this error will be greatly appreciated.
Edited by: OBIGuy on Sep 27, 2010 2:37 PM

Hi,
I recenty started instaling OBIEE 11g and got the same error : "Creating BI server system components". I read your solution and would like to know that if this patch is okay to install on a Windows VM (win server 2003 EE, SP2). If yes, after rebooting, do we reinstall ?
I am also getting the following errors:
-Executing: opmnctl start coreapplication_obiccs1
-Executing: opmnctl start coreapplication_obis1
-Executing: opmnctl start coreapplication_obips1
-Executing: opmnctl start coreapplication_obisch1
Thanks in advance.
HG

Oracle Forms 11g Installation. Create domain problem

Hi,
I am installing Oracle Forms 11g on Windows 7 32-bit system. Installation is done. Create domain is failing during the configuration process.
I searched everywhere but cudnt find a solution specific to the problem.
Only recognisable error message is 'CSF Entries will not be parsed since the AdminServer is unreachable'.
I have checked Node Manager is not running.
Please find below the snapshot of the last few lines of the log file
[2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] New Description: Application Configuration
[2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] Old Description: Application Configuration
[2014-05-23T13:43:22.570+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_HOME_PATH) to:C:/Oracle/Middleware/user_projects/domains/ClassicDomain. Value obtained from:USER
[2014-05-23T13:43:23.787+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2014-05-23T13:43:27.297+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine.config] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Starting Action:Application Configuration
[2014-05-23T13:43:27.297+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.classic.ca.standard.ClassicConfigMain] [SRC_METHOD: doExecute] ENTRY
[2014-05-23T13:43:35.117+05:30] [as] [WARNING] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Executing a Jaxb workflow ...
[2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
[2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: ENTRY........
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@180874
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: 2........
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Set the Extion Id to START........
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Did the assignment...
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: EXIT........
[2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Domain Home: C:/Oracle/Middleware/user_projects/domains/ClassicDomain
[2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Oracle Home: C:/Oracle/Middleware/Oracle_FRHome2
[2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting os object values in Python
[2014-05-23T13:44:18.861+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Any help is highly appreciated.

Hi,
Please run the below commands in the command prompt :-
1)hostname
 Ex:-
 C:\Users>hostname
 celvpint8511
2)nslookup <Result of the step 1>
 Ex :- C:\Users>nslookup celvpint8511
 Server: 192.135.82.132
 Address: 192.135.82.132#53
 Name: celvpint8511.us.oracle.com
 Address: 10.64.166.6 [ So this is the IP Address which needs to be used ]
So please get the right IP and then update it in the host file.
Regards,
Prakash.

How to convert SQL server stored procedures to Oracle 11g

Hi Experts,
In SQL server 30 stored procedures are there how to convert all the stored procedure
from SQL server to Oracle 11g.
Please help me,
Thanks.

ramya_162 wrote:
In SQL server 30 stored procedures are there how to convert all the stored procedure
from SQL server to Oracle 11g.
The single most fundamental concept you need to understand (grok in its fullness) is:
ORACLE IS NOT SQL-SERVER
There is very little, to NOTHING, in common between T-SQL (a language extension to SQL) and PL/SQL (integration of SQL with the language Ada, part of ALGOL family of languages that includes Pascal and C++).
So taking a T-SQL procedure and porting it as is to PL/SQL is plain stupid.
Why?
Oracle sucks at trying to be SQL-Server.
So how do you migrate from SQL-Server to Oracle?
By taking the REQUIREMENTS that the T-SQL procedures address, and addressing these requirements using Oracle SQL and PL/SQL.

Oracle Database 11g-R2 with Windows Server 2008

Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Thanks in Advance.
Muhammad Uzair
Oracle Application Developer
Oracle APEX Developer
Pakistan
+92 (333) 7058754

uzairmalik wrote:
Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Did you look in the installation guide for the software requirement for 11.2? You could had easily found the answer from there by yourself.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
From the above link,
>
Requirement Value
Operating System
Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows Server 2003 - all editions
Windows Server 2003 R2 - all editions
Windows XP Professional
Windows Vista - Business, Enterprise, and Ultimate editions
Windows Server 2008 - Standard, Enterprise, Datacenter, Web, and Foundation editions. The Server Core option is not supported.
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support.
Windows 7 - Professional, Enterprise, and Ultimate editions
Windows Multilingual User Interface Pack is supported.
>
Aman....

ADF Server Domain Requirement on Oracle WLS 11g

Similar Messages

Maybe you are looking for