ADF Table with check box on each row - First time selection gets unchecked
Hi,
The ADF Table has a check box in each, whenever a select box is clicked for the first time , it gets unselected automatically.
Also if I select a row / click on a row and then select the check box, it is properly getting selected. I see there is some kind of autosubmit happens. Is there a way to handle this scenerio?
Regards,
Dhamo
I had this same issue happen in 11.1.1.6.x This is a bug involving an autosubmit when the checkbox is selected.
After migrating to 11.1.1.7.0 on J Developer and Weblogic, the problem was fixed.
One thing to check is to make sure you are using the jars from ADF 11.1.1.7.0.
Hope that helps
Similar Messages
-
I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.
Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal; -
Check Box for each row in report -- all rows deleting when pressing DELETE
Hello experts! I have set up a report with a check box for each row. When I click the DELETE button to delete the selected rows, every single one of the rows get deleted...even the ones that are not selected. I have my process point set to "On Submit - After computations and validations".
This is my delete process (SHG is the table and SHG_ID is the primary key):
FOR i in 1..HTMLDB_APPLICATION.G_F01.count
LOOP
DELETE FROM SHG
WHERE SHG_ID = HTMLDB_APPLICATION.G_F01(i);
END LOOP;
Also, I've added to query in the region source this line:
htmldb_item.checkbox(1, SHG_ID) del,
Where does the "1" come into this? Not sure what I am doing wrong!
Message was edited by:
user477193
Message was edited by:
user477193The 1 (first argument to all the htmldb_item.* APIs) corresponds to the array number in htmldb_application.g_fNN. So 1 will populate array g_f01, 2 will populate g_f02 and so on.
Your code seems fine, it should delete only the checked rows. Are you sure there is no other process on the page that might be deleting the rows? See if you can put up an example on htmldb.oracle.com -
Hello Folks,
I am finding very difficult here with checkBox.....
I have a button Names "SELECT ALL" that selects all the rows in the af:table but i am also looking to check all the checkBoxes associated with row with that same "SELECT ALL" button...
This is how i am selecting all the row and this works fine but i should also be able to check the check Boxes along with row selection for that row with that same click.
RowKeySet rks = new RowKeySetImpl();
CollectionModel model = (CollectionModel) getBidTB().getValue();
int rowcount = model.getRowCount();
for (int i = 0; i < rowcount; i++)
model.setRowIndex(i);
Object key = model.getRowKey();
rks.add(key);
getBidTB().setSelectedRowKeys(rks);
AdfFacesContext.getCurrentInstance().addPartialTarget(getPanelGroup());
It seems simple but my head is sniping a lot already can't get into it... Your Help will be highly appreciated.
Thanks
### edited/ added #### i am using transient VO, if that makes any difference.
Edited by: MavenDev on Dec 20, 2011 12:35 PMFor those who are in similar situation ... below is the code which i used to select all check boxes for all row that are selected :
RowKeySet selectedEmps = getBidTB().getSelectedRowKeys();
Iterator selectedEmpIter = selectedEmps.iterator();
DCBindingContainer bindings =
(DCBindingContainer) BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter =
bindings.findIteratorBinding("myIter");
RowSetIterator empRSIter = empIter.getRowSetIterator();
while (selectedEmpIter.hasNext())
Key key = (Key) ((List) selectedEmpIter.next()).get(0);
Row currentRow = empRSIter.getRow(key);
currentRow.setAttribute("RowChkFlg", Boolean.TRUE);
} -
ADF Table with CheckBox - Select/deselect issue
I have seen couple of threads and blogs for ADF table with check box . but none of them exactly matching with my requirement . My Database table does not have any field for check box .
Here is my DB Table
tableA_
A_Id
A_Name
tableB*
B_Id
Requirements :*
1. Display the above tables data with Checkbox . ( if A_Id = B_Id then the checkbox will be checked , else unchecked ) .
2. Select / deselect the check box and save the data . Saving the data , will update only tableB . i,e when a new check box is selected then A_Id value will be inserted to tableB . Similarly , deselecting a checked in data will remove the entry from tableB.
Development :
1. Created a VO where tableB has marked as updateable .
2. Created a transient Boolean variable for checkBox . and modified the getter method of checkbox for returning true/false based on the below condition in the ViewRowImpl Class .
if ( A_Id = B_Id )
return true;
else false ;
3. I have not modified the setter method .
Using the above concept i can view the data with selected checkbox . but the problem is to save the data . because , when I select a checkbox the above coding in the getter method will return false .
Therefore , though i am selecting the checkbox but value of the checkbox has been set as false .
While saving the Data , I am iterating through the VOIterator and observed that a newly selected checkbox value is false . and realized its because of the getter method condition .
Can you please suggest how can I overcome this issue or shall I need to take any other approach ?
Jdev version 11.1.1.5
Regards,
Amitava
Edited by: Amitava on Mar 17, 2012 3:48 PMYou need to go through the ADF page life cycle concepts. In simple words the boolean value in the model is not set while in valueChangeListener. Try adding valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance()); on top in your listener method and see the effect.
Reference:
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/adf_lifecycle.htm -
Implementing delete button with check boxes
I read the how to instructions titled: "Adding check boxes to each row in a report". I believe I followed the steps correctly however when I test the process I get the unsuccessful error along with this error text: ORA-06550: line 8, column 2: PLS-00103: Encountered the symbol ";" when expecting one of the following: begin case declare end exception exit for goto if loop mod null pragma raise return select update while with << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe The symbol "exit" was substituted for ";" to continue.
I am guessing there is an error with in this code:
for i in 1..HTMLDB_APPLICATION.G_F01.count
loop
delete from acceptance_criteria
where item_number = htmldb_application.g_f01(i);
end loop;Anonymous - Please see Using a custom PL/SQL to populate the primary key in a tabular form
Scott -
Problem with check box in ALV Grid Display
I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
ld_idx TYPE i.
LOOP AT gt_outtab INTO ls_outtab
WHERE ( chkbox = 'X' ).
ld_idx = syst-tabix.
" Call your update function / method / perform
ls_outtab-chkbox = space.
MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe -
. How to put Check box in every row in Table
Hi Friends,
I have one doubt in Webdynpro with java. How to put Check box in every row in Table?
For Exam My requirement is I am getting BAPI from ECC System. So I have to go given input details in first view and output details in SecondView. So in Second View I will taken Table that data will displayed in rows. I need each and every row first I need check box.
Here Select Check Box of particular row then click GetData button. That row data will be displayed in one popup window.
In table suppose 6 rows available in table. Every Row first Check box available.
empid, name, sal ,firstname, last Name
empid, name, sal ,firstname, last Name
empid, name, sal ,firstname, last Name
How to put Check box in every row in Table? can you send any examples applications
Regards
VijayHi Friend,
When we are getting BAPI From ECC System. that BAPI Have nodes and Attribues...in under node we can't create "CheckBox"
attribute.
So i am doing like this.I am create on Checbox attribue out side of Node. Check Box data type is boolean.
next i am creating table ( that table having rows and columns) Right click on table-->Click on Insert GroupedColumn->again right click on nsert GroupedColumn---> Here Select Check Box.
Okay...here i am getting one problem. i have got Check boxes .But i am select check box in first row. that time all check boxes will be selected.
i need select first row check box that only first row will be selected suppose i selected second row check box that only second will be selected.
i need this can u help me....
Regards
Vijay -
Can I get a sample program of ALV (oops) with check boxes in it. thank you.
Types: begin of lt_io.
include structure mara. " Your Structure
Types: style_table type lvc_t_style.
Types: end of lt_io.
data: lt_io type table of lt_io,
ls_layout type lvc_s_layo,
lt_fcat type lvc_t_fcat,
lo_grid type ref to cl_gui_alv_grid.
field-symbols: <io> type lt_io,
<fcat> type lvc_s_fcat.
... fill your output table ....
ls_layout-stylefname = 'STYLE_TABLE'.
loop at lt_io assigning <io>.
PERFORM set_style USING 'CHECKBOX' "Your Filename
CHANGING <io>.
endloop.
... Fill Your Field Catalog lt_fcat
read table lt_fcat assigning <fcat>
where fieldname = 'CHECKBOX'.
<fcat>-checkbox = 'X'.
create grid control lo_grid.
CALL METHOD lo_grid->set_table_for_first_display
EXPORTING
is_layout = ls_layout
CHANGING
it_fieldcatalog = lt_fcat
it_outtab = lt_io[].
FORM set_button_to_line
USING iv_fieldname TYPE lvc_fname
CHANGING cs_io TYPE io.
DATA: ls_style TYPE lvc_s_styl,
lt_style TYPE lvc_t_styl.
ls_style-fieldname = iv_fieldname.
if cs_io-checkbox = ' '.
ls_style-style = cl_gui_alv_grid=>mc_style_enabled.
else.
ls_style-style = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_style-maxlen = 2.
INSERT ls_style INTO TABLE io-style_table.
ENDFORM. "set_icon_to_status_line
[/code].
A classical report is a program that generates a single list, which must contain all of the required detail information.
1) This procedure may result in extensive lists from which the user has to pick the relevant data.
2) For background processing, this is the only possible method. After starting a background job, there is no way of influencing the program.
3) The desired selections must be made beforehand and the list must provide detailed information.
4) For dialog sessions, there are no such restrictions.
5) The user is present during the execution of the program and can control and manipulate the program flow directly.
6) To be able to use all advantages of the online environment, classical reporting was developed into interactive reporting.
ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
Advantages.
Collapse multiple reports into one, drastically cutting down your report development time
Save many hours using built-in ALV sorting, subtotaling and filtering capabilities
Add conditional structures into your ALV report: No programming required!
Combine ALV with display variants to meet a wide range of reporting requirements more easily
Dynamically reorder column layouts and add/subtract fields
Enable users and analysts to save their own personalized variants
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
declarations for spl.group.
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV
GT_SORT TYPE SLIS_T_SORTINFO_ALV, "for sort
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-FIELDNAME = 'FIELD1'.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
ls_sort-subtot = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
APPEND LS_SORT TO E06_LT_SORT.
LS_SORT-FIELDNAME = 'FIELD2'.
LS_SORT-SPOS = 2.
LS_SORT-UP = 'X'.
ls_sort-subtot = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
for creating the group..
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = TEXT-005.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
and pass this info to FM...
layout-sUBTOTALS_TEXT = 'SUbt...'
and pass spl group info to fieldcatalog also...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_SPECIAL_GROUPS = GT_SP_GROUP[]
IT_SORT = GT_SORT[]
TYPES :
BEGIN OF ty_vbak,
vkorg TYPE vbak-vkorg, " Sales organization
kunnr TYPE vbak-kunnr, " Sold-to party
vbeln TYPE vbak-vbeln, " Sales document
netwr TYPE vbak-netwr, " Net Value of the Sales Order
waerk TYPE vbak-waerk, " Document currency
END OF ty_vbak.
DATA:
vbak TYPE vbak,
gt_vbak TYPE TABLE OF ty_vbak.
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
Form f_read_data
FORM f_read_data.
SELECT vkorg kunnr vbeln netwr waerk
UP TO p_max ROWS
INTO TABLE gt_vbak
FROM vbak
WHERE kunnr IN s_kunnr
AND vbeln IN s_vbeln
AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
Form f_display_data
FORM f_display_data.
TYPE-POOLS: slis. " ALV Global types
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-do_sum = &2.
ls_fieldcat-cfieldname = &3.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
ls_sort-subtot = &2.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
TABLES
t_outtab = gt_vbak.
ENDFORM.
Check out these sample programs
BCALV_GRID_01
This program illustrates how the events for print processing PRINT_TOP_OF_PAGE,
PRINT_END_OF_PAGE, PRINT_TOP_OF_LIST,PRINT_END_OF_LIST are handled. The
corresponding handler methods control the appearance of the list printed.
BCALV_GRID_02
Show a detail list in an amodal window. There is no second dynro needed in contrast to
BCALV_GRID_03.
BCALV_GRID_03
This program implements a function on event DOUBLE_CLICK. According to the selected line data
from table SBOOK is selected and displayed by a second ALV Control in a dialog dynpro.
BCALV_GRID_04
Illustrates the use of exceptions (lights or leds). According to the values of SFLIGHT-SEATSOCC, the
lights are set to 1 (red), 2 (yellow) or 3 (green).
BCALV_GRID_05
Demonstrate the creation of an own toolbar button.
BCALV_GRID_06
Demonstrate the creation of an own context menu.
BCALV_GRID_07
Append a menu button to the standard toolbar.
BCALV_GRID_08
Append a menu with default button to the standard toolbar. It is exactly the same as
BCALVC_TB_WITH_MENU except for methods HANDLE_MENU_BUTTON and HANDLE_TOOLBAR.
Editable ALV grids
BCALV_EDIT_01
This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02
This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03
In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04
This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05
This example shows how to use checkboxes within an ALV Grid Control. You learn:
(1) how to define a column for editable checkboxes for an attribute of your list
(2) how to evaluate the checked checkboxes
(3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06
This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07
This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08
This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
(1) how to replace the standard f4 help
(2) how to pass the selected value to the ALV Grid Control
(3) how to build an f4 help, whose value range depend on a value of another cell.
Check this link tooo
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/23/oopsALVin+ABAP&showComments=true
The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
check these links
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Try these links
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
For More alv report examples check these Tcodes LIBS, BIBS Here u can find more number of examples on alv reports of different kinds
check this sample code for intercative alv report
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH -
Hi,
I want to make a grid with check box. I want to have two column in the grid. One column of the grid will show some column name of a table and the other column will contain check box. If I tick the check box of a the selected row of the grid then the value (e.g. Y or N) will store in the particulr table.
I have written some code regardig this. But I am not getting my problem solved. I am sending the code sample below.
oNewItem = oOrderForm.Items.Add("MyGrid", SAPbouiCOM.BoFormItemTypes.it_GRID)
oNewItem.Left = 20
oNewItem.Top = 30
oNewItem.Width = 198
oNewItem.Height = 130
oGrid = oNewItem.Specific
Dim str As String
str = "SELECT COLUMN_NAME AS FACILITIES, '' AS TICK FROM PIONEER.INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = N'OITM' AND ORDINAL_POSITION BETWEEN 102 AND 165"
oOrderForm.DataSources.DataTables.Add("MyDataTable")
oOrderForm.DataSources.DataTables.Item(0).ExecuteQuery(str)
oGrid.DataTable = oOrderForm.DataSources.DataTables.Item("MyDataTable")
' Set columns size
oGrid.Columns.Item(0).Width = 270
oGrid.Columns.Item(0).Editable = False
oGrid.Columns.Item(1).Width = 70
oGrid.Columns.Item(1).Type.gct_CheckBox.GetValues()
From The last line I am getting problem. Please any one can help me for this problem.
Thank you
Amit Kumar ShaiHi
The last line should read like this
oGrid.Columns.Item(1).Type = SAPbouiCOM.BoGridColumnType.gct_CheckBox -
How to Show data in grouping with check boxes.
Hi Experts,
I am new to ADF and want to resolve one issue for my urgent project requirement.
My Problem is :
In Employee, Department relationship i need to show data in a grouping of departments like for Marketing department all the related employees should come in a single column.
eg .
Dept Name Emp Name
Marketing Akshay Nitin Ritu
Sales Neeraj Vikas Venu
* All these department names and employees should come with check boxes and if i select one department all the employees should be checked.
Please Please suggest any solution asap.
Many Thanks in Advance.
Regards,
Nitin
Edited by: user10980736 on Feb 7, 2011 8:32 AMhi,
You can create two value nodes for storing these collections. The first one would be singleton node as it is the main list. Under that create the second node with singleton = false.
e.g.
---NodeA
--attrA1
--attrA2
--NodeB(singleton = false)
--attrB1
--attrB2
Now populate collection of object A in NodeA and after adding element in NodeA populate respective elements in NodeB.
IPrivate<View>View.INodeANode nodeA = wdContext.NodeAnode();
for (Iterator it = collectionA.iterator(); it.hasNext(); )
ObjectA objA= it.next();
IPrivate<View>View.INodeAElement nodeAElem= nodeA.createNodeAElement();
wdCopyservice.copy Corresponding(objA,nodeAElem);
nodeA.addElement(nodeAElem);
Collection collectioB =objA.getCollectionB();
for (Iterator it1 = collectionB.iterator(); it1.hasNext(); )
ObjectB objB= it1.next();
IPrivate<View>View.INodeBNode nodeB = nodeAElem.nodeBnode();
IPrivate<View>View.INodeAElement nodeBElem= nodeB.createNodeBElement();
wdCopyservice.copy Corresponding(objB,nodeBElem);
nodeB.addElement(nodeBElem);
Bind NodeA to the first table and NodeB to second one.
After that when you select record in first table automatically its corresponding records will be populated in second table.
Hope this helps!
Monalisa -
[Solved]Problem in showing ADF tables with 50,000 Records and more in TP4
Hi,
When I tried to view readonly ADF table in TP4, it loaded perfectly, but when i tried to run the vertical scrollbar to bottom record, it showed Fetching Data .... for few minutes and finally it showed a message. java.lang.OutOfMemoryError: Java heap space.
When I tried to view normal ADF table in TP4, it loaded perfectly, but when i selected one row a popup Error message came and reported all the columns in the table with java.lang.NullPointerException.
Similar functionality works beautifully in JDeveloper 10g version. Seems to be a serious problem in handling cached rows.
Regards,
Santhosh
I am also getting a warning in OC4J console as given below:
WARNING: Application loader current-workspace-app.web.SRApplication-ViewController-webapp:0.0.0 may not use /D:/Appl/jdevstudio1111/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\Appl\jdevstudio1111\j2ee\home\oc4j.jar)
Message was edited by:
Santhosh1234
Message was edited by:
Santhosh1234Hi!
You have two ways:
1. build your own table CollectionModel that will use TopLink paged data source access (see Pedja's thread here Paging of large data sets - SOLUTION
2. use new Paged EJB finders that started to appear with TP4 when you use wizard to generate SessionBeans (named something like "query<Entity>FindAllByRange") . I posted already question about this new paged finders here How to use new "query<Entity>FindAllByRange" EJB finders? but no answers from devs yet :)
Personally, I opt for no. 2 (paged finders) as it looks more platform-supported that writing custom CollectionModels for each finder... But until devs enlighten us with details how the paged finders are to be used (the af:table is not [yet?] supportive for drag-and-drop of paged finders), we are stuck with 1. option.
Regards,
Pavle -
How to bind ADF table with a collection of elements using backing bean.
Hi Experts,
My JDev version is 11.1.1.6.0.
I need to bind ADF table with a collection of elements using backing bean.
My backing bean consists of 6 lists of strings, where each list represents a column of table. How can I populate the entries of table with these lists.
Thanks
GopiHi,
Create an object representing the row (setter/getter). Then have a list of these objects. Drag and drop the table and point its value to the list and the type to the row object
Frank -
Upload text file to oracle table with checking and aggregation
Hi Friends,
I am new to ODI. I have encountered a problem which is specific to ODI 11G (11.1.1.6.3) to upload text file to oracle table with checking and aggregation. Would you please teach me how to implement the following requirement in ODI 11G?
Input text file a:
staffCode, staffCat, status, data
input text file b:
staffCodeStart, staffCodeEnd, staffCat
temp output oracle table c:
staffCat, data
output oracle table d:
staffCat, data
order:
a.staffCode, a.staffCat, a.status
filter:
a.status = ‘active’
join:
a left outerjoin b on a.staffCode between b.staffCodeStart and b.staffCodeEnd
insert temp table c:
c.staffCat = if b.staffCat is not null then b.staffCat else a.staffCat
c.data = a.data
insert table d:
if c.staffCat between 99 and 1000 then d.staffCat = c.staffCat, d.data = sum(c.data)
else d.staffCat = c.staffCat, d.data = LAST(c.data)
Any help on fixing this is highly appreciated. Thanks!!
Thanks,
ChrisDear Santy,
Many thanks for your prompt reply. May I have more information about the LAST or SUM step?
I was successful to create and run the following interfaces p and q
1. Drag text file a to a newly created interface panel p
2. Filter text file a : a.status = ‘active’
3. Lookup text file a to text file b : a.staffCode between b.staffCodeStart and b.staffCodeEnd
4. Drag oracle temp table c to interface panel p
5. Set c.staffCat : CASE WHEN b.staffCat IS NULL THEN a.staffCat ELSE b.staffCat END
6. Set c.data : a.data
7. Drag oracle temp table c to a newly created interface panel q
8. Drag oracle table d to interface panel q
9. Set UK to d.staffCat
10. Set Distinct Rows to table d
11. Set d.staffCat = c.staffCat
12. Set d.data = SUM(c.data)
However, the interface q should be more than that:
If c.staffCat is between 99 and 1000, then d.data = the last record c.data; else d.data = sum(c.data)
Would you please teach me how to do the LAST or SUM steps? Moreover, can interface p and interface q be combined to one interface and do not use the temp table c? Millions thanks!
Regards,
Chris -
Hi,
i am Displaying a table control in module pool programming
i need to have check boxes for each item in the table control.
Regards,
VijayaHI,
Refer to the link.
how to create a check box in table control
This may help.
Regards
Sumit Agarwal
Maybe you are looking for
-
Determining the primary key in a database table
Hi people.. I am building an interface which displays the database information...according to the specified datasource name.. Up till now i managed to display the different tables and the respective attributes... Is there a way of how i can determine
-
Differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform
Hello, J would like to know if there are some differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform. I know that there are some differences on Oracle 8i Parallel Server and i know that some products are not include like
-
Problems Viewing Site After Upgrade
Now that I've upgraded to 08, I have so many problems with viewing my site (created with iWeb 06), that I'm thinking I should uninstall 08. The banner and the menu bar are absent when viewed in Explorer. The frames around some text boxes and photos d
-
Setter not getting called .
Hello Experts , I have a Search view with a BOL QUERY object (say A). I enhanced the view and added another BOL DQUERY object(say B).I am putting value in the B fields in the WEB UI , but the setters don't get called with BOL DQUERY object B fields e
-
How to revert to older software to play ipod in car stereo
I have a Classic I-pod with software version 3.1.1. The manual for my Pioneer DEH-P310UB car stereo says it will play the Classic I-pod version 1.1.2. Can I revert my I-pod software back to 1.1.2 in order to play it in the car? I'm going on a long ro