ADF values not showing in inventory

I have a couple administrator defined fields (ADF) that seemed to be populated on the workstation (shown in %ZENWORKS_HOME%\work\inventory\*-cdflast.xml) but they do not appear in the Zenworks inventory report. Why would that be?
(ZCM agent v11.2.4)

Must I have "Launch Collection Data Form" checked in Inventory/Scan Now to get ADF into the inventory?

Similar Messages

  • Non-cumulative Values not showing in Inventory Management Queries

    Hi:
    Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
    I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

    Found the problem.  It had to do with the compression variant in the delta process chain.  The compression was set to 'no marker update'.  Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up.  Reinitalized and the deltas are working correctly now.

  • Router 7606 does not show the inventory for the Fan module

    I have a issue with a router 7606, specifically with  fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID  for module fan, 
    logg" system minor alarm on operating fan count"
    Someone knows what could be happening,

    Check this:
    Can you try this;
    7606-01#show environment status fan-tray 1
    fan-tray 1: 
      fan-tray 1 type: FAN-MOD-6SHS
      fan-tray 1 mode: Auto
      fan-tray 1 fan-fail: OK
    7606-01#show power
    Fan  Type               Watts   A @42V State
    1    FAN-MOD-6SHS        180.18  4.29  OK............................ FAn try
    If above doesnt work then try the below link:
    https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
    HTH
    inayath
    *Plz dont forget to rate if this info is helpfull.

  • ADF Query not showing correct search results.

    Hi,
    I am using normal ADF af:query to search data using a VO Criteria.
    We have modified the getter of searched column in VORowImpl java class to return values based on NLSID search from cache.
    Logic in getter:
    If for a column_name nlsid is present then show data as the value of nlsid.
    Suppose Initially:
    column_name = "Column1"
    column_name_nlsid="Column1_nlsid"
    column_name_nlsid_value="Column1_nlsid_value"
    The table will show:
    column_name: "Column1_nlsid_value"
    if we search "Column1" as column_name, The Search will also show:
    column_name: "Column1_nlsid_value"
    in results
    But,
    If we modify the nlsid value as:
    column_name_nlsid_value="Column1_nlsid_value_MODIFIED"
    Then
    The table will show:
    column_name: "Column1_nlsid_value_MODIFIED"
    if we search "MODIFIED" in column_name, The Search will NOT show any results
    So, it seems to me that the af:query search always searches upon the values derived from InternalAttribute values.
    What can i do to over-ride such behaviour , so that the search also takes the data from modified getters.

    Try posting in Jdeveloper Forum JDeveloper and ADF which has more audience

  • Landed Cost not showing in Inventory Audit

    I have a query that goes against the OIPF/IPF1 tables to locate all Landed Cost transactions for a particular item. To test/verify the query, I ran the Inventory Audit report for the item. There are transactions returned from the query that do not show in the Inventory Audit report. Is there any reason or circumstance under which a Landed Cost Transaction would not show in the Inventory Audit report. I checked against all warehouses. This does not seem to be a singular event in that I have found random occurences of this for different items yet the majority of the time the Audit Report returns all entries.

    Dear Cristian
    Please check the Following things.
    1)First check audit report for a Single Product.
    2)Select all warehouse in Audit report.
    3) Check you landed cost entry if your JV not pass in landed cost, so landed Cost not reflected in you audit report. (Auto JV not pass in SAP 2005 Version)
    Please check and Let me Know.
    Regards
    Mangesh Pagdhare.

  • Filter values not showing on iPad

    Hi,
    I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW server is BW 7.3 BO is BO 4, SP2.
    How do I fix this issue?
    Regards,
    Nikhil

    Hello Simone,
    please can you tell me, if the open document function with refresh parameter is working in BO mobile App V 4.0.3 (Build 1211)?
    In the Release notes for this Version it is described how to do this:
    Open Document
    1. Apart from iDocID, sIDType and sDocName, other document identifier parameters are not supported
    in the OpenDoc URL.
    2. Apart from sReportName, sRefresh, IsM[name] and IsS[name], other input parameters are
    not supported in the OpenDoc URL.
    3. Session management parameter (token) is not supported.
    4. Output parameters are not supported in the OpenDoc URL.
    We tried to use the following link, but the report did't refresh with the correct parameters:
    http://svie32sapbo1:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AfFdCbmEEvZIiVXXFLh4iPY&sIDType=CUID&sRefresh=Y&lsMWert=Alarmierung
    The Part "Wert=Alarmierung" should be dynamical in future.
    Thank you and regards
    Wolfgang

  • Ssrs parameter default value not showing ,when available values is binded to query dataset

    I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is  not showing in report preview .
    Many Thanks
    Chandra

    Hi Chandra,
    According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
    In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
    the default values.
    Reference:
    Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Metadata values not showing in Site Studio layout using Idoc Script

    Hi All,
    We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
    Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use <!--$DOC_INFO.dDocTitle--> to show the content item Title with no problems.
    However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code <!--$DOC_INFO.xFinishDate--> simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
    The <!--$DOC_INFO.dDocTitle--> value works for ALL items, but the <!--$DOC_INFO.xFinishDate--> does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
    The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
    Is there something I am missing? Any help is greatly appreciated.
    Luke.

    Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
    However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
    Using this URL as an example: http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011217
    At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
    However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011216". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
    I guess I need to either:
    - change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
    - explicitly make a resultset using <!--$executeService("SS_GET_SEARCH_RESULTS")--> with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
    9.45 SS_GET_SEARCH_RESULTS
    ■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
    service. It allows some Site Studio features to be specified simply as flags and have
    the real query syntax be constructed on the server. It can modify the standard
    'SearchResults' resultset to contain an additional column called 'ssUrl' which will
    contain the Site Studio-friendly url for all of the search results.
    ■ Parameters:
    – siteId: the unique identifier of the site (required).
    – ssLimitScope: True/False, restricting scope to within the site only (optional).
    – ssUserSearchText: user-supplied search text (optional).
    – ssWebsiteObjectType: object type (optional).
    – computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
    ■ Returns: resultset named ’Search Results’.
    ■ Security: The user must have at write access to at least one security group on the
    content server
    Thanks to everyone for their help. Almost there!
    Edited by: lukeb2112 on 18/01/2010 17:30

  • Discount value not showing in the P.O printout

    Hi,
    I have created a Service p.o with 5 line items,i have entered the condition type RA01 = 10 % for all the items,
    But in the P.O printout the discount value is showing only for the first 2 line items , the value is not showing for the balance 3 line items.
    Any help will be greatly appreciated.
    Nijamudeen.S

    Hi,
    if the same condition type is used for previous two line items, then this is ABAP issue. May be smartform coding is restricting to print the value for more than 2 line items. Can you seat with ABAP and check.

  • ADF Portlets not showing up

    Hello ,
    I am using Oracle AS 10.1.2 , Oracle Portal 10.1.4 , JDeveloper 10.1.3.3 installed on a Linux box.
    I have also downloaded and run the ADF Runtime Installer JAR file in the box.
    But, when I try to deploy an ADF screen as a JSR 168 portlet it is not showing up as a portlet and is throwing an "500 Internal Server Error". Any ideas ! !
    Although , when I try to run the same portlet in my JDeveloper Webcenter pre-configured OC4J it works fine.
    Please let me know if anyone has found a solution to the above problem.
    Best Regards.

    If its a caching issue, which caches did you try to flush?
    Or can you create a JSP , deploy it to the app servers with the following code
    <%@ page import="com.bea.p13n.cache.* "%>
    <%@ page import="java.util.* "%>
    <%
    String[] cachenames = CacheFactory.getCacheNames();
    for (int i = 0; i<cachenames.length; i++)
    String curCacheName = cachenames;
    CacheFactory.flush(curCacheName);
    %>
    and access this JSP and see if it solves your problem
    If it doesnt solve your problem, do you have personalized desktops for each user or something?
    regards
    deepak

  • BCWP values not showing in CNE5

    Hi,
    After executing CNE5 report it not showing BCWP value in particular project only.I have checked all the necessary data like actual dates are maintained.
    What could be the reason.
    Please guide.
    Regards
    Nitin

    Hi,
    Thanks for reply.
    I've already done that.
    BCWP is not showing only for 4 projects & in other project it is giving correct BCWP value.
    When we generate MIS through BW Module I am getting BCWP graph for the same project whose BCWP not showing in CNE5.
    Thanks & Regards
    Nitin

  • Variable value not showing in sql developer  tool

    HI,
    I am using sql developer tool. when i take mouse in variable name at debugging its not showing variable value and instead showing variable name data type and owner. but in past i have used sql developer tool where when i take mouse on variable at debugging mode it shows the varable value.  please tell me is there any issue in sql develper tool currently i am using.
    sql developer version 2.1.0.63

    Sorry - but I doubt if you will get much help for that ANCIENT version of Sql Developer.
    My best suggestion is to download the current version and see if you still have the problem. There have been HUNDREDS of bug fixes since that version you are using.
    Oracle SQL Developer Downloads
    Take note that the current version REQUIRES a much higher JDK version than what you may be using. And do NOT try to install the new version on top of the old one.
    Install the new version into a totally new folder. You will be ask if you want to import your settings from your current version.

  • UDF Value not showing in SQL

    Dear Experts...
    Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
    UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
    I can't understand why SQL does not showing me Value of UDF.
    Regards,
    Ravi

    Hi Ravi,
    Run below query in query generator for specific document number and check if udf values are shown or not?
    SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
    T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
    Thanks,
    Neetu

  • Value not showing in Radiogroup

    Hi,
    I have a radiogroup that seems to be defined correctly based on a database column value, but the selected radiogroup values do not show up on the Edit form. I see the values in the table and on a report but not on the Edit form. Other fields on the form show up correctly. The Radiogroup works fine for data entry, but not for edit. Any ideas on what could be wrong would be appreciated. Even compared it to other forms and the radiogroup properties are almost identical.
    Using version 3.2.1 of Apex.
    Thanks,
    pat

    Is the radiogroup item set to retrieve the value from the database with each page view? This is controlled with the "Source Used" setting on the radiogroup item.
    This is from the help:
    >
    Determines which value takes precedence, the cached value from session state or the item source value. For items with source type Database Column, select Always unless you do not want the associated row fetch operation to populate the item if the page branches back to itself.
    For items with other source types you must decide based on how the page is used, whether the previously sourced value should be displayed, or if the source type should be applied anew for each page view.
    >
    Just an idea.
    Earl

  • Data value not showing in added column

    I have added a column to a fixed SQL query.  When the application runs, the column appears in the display grid, but the value is missing.
    I have added the column to both the query and display templates.  I've added the column to the IlluminatorDoc, reselected the query template in the IllumSQLQuery block, and updated the configuration in the IlluminatorRow block to link the new field.
    The new column appears in the Rowsets/Rowset/Column and I can see the value in Rowsets/Rowset/Row.  When running the xacute query calling the BLS transaction, the new column and value is displayed in the text/html format.
    Can anyone advise on why the column value is not showing in the grid?

    Thank you Sam for your answer!
    I had the column mapped in the display template, however, I had mapped to the query within the transaction instead of selecting the xacute query.  My column names were very similar, but in taking a closer look I realized I had the wrong query.  Once I selected the correct query, mapped the column and cleared the Java cache, the value then displayed.
    When I right-click on the iGrid, the Data option is disabled and cannot be selected so that I can see the detail.  I'm not sure how to correct this.
    Thanks again!

Maybe you are looking for