ADFS 2.0 service does not automatically start after reboot

Hello,
We have two ADFS 2.0 servers in a farm. Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start. If I manually start the service it starts within 10 seconds.
The error in the logs show:
A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
The AD FS 2.0 Windows Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
But after the reboot is completed, I can manually start the service with no problems. Again, this ONLY happens on restart. I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
Any ideas?

UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service". I re-entered our ADFS service account username and password, it was
accepted, and I rebooted. On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot. I then changed it back to the named domain service account, and the issue came right
back. There are no other errors in the System Log indicating a problem with anything else.
So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot. But what?

Similar Messages

Database not automatically starting after reboot of RedHat ES4 Linux

Hi,
I have Oracle database enterprise edition 9.2.0.4 running on RedHat Linux ES release 4. Although the installation went fine and after the installation I was able to see the common processes like ora_pmon started in system, but when I reboot system the database does not comeup.
I am using dbstart command via a /etc/init.d/oracle file. This is linked to /etc/rc5.d and /etc/rc3.d as well in the Linux server.
The amazing thing is that tnslistener is started automatically after system reboot but not database. That is, when I check the status of that via the command "lsnrctl status" it shows me the one database instance that I am hoping to see correctly. But no ora_pmon etc processes are there.
Even interesting thing is that when I manually run the command "/etc/init.d/oracle start" by hand, it does start the database perfectly fine. This is the same command that I am running via the startup scripts in /etc/rc5.d and othe runlevels.
Please help me finding out why is the database not starting up automatically? I have checked the /u02/app/oracle/product/9.2.0/startup.log which just says reports that Listener has started but after that it does not show anything about database starting up.
Below I am pasting the chunk of /etc/init.d/oracle script that is supposed to start the listener and database. Please have a look at it and tell me what can I be doing wrong in this case?
ORACLE=oracle1
export ORACLE_HOME PATH
LOG=$ORACLE_HOME/startup.log
touch $LOG
chmod a+r $LOG
case $1 in
'start')
echo "$0: starting up" >> $LOG
date >> $LOG
# Start Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "starting Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl start" >> $LOG 2>&1 &
fi
echo "starting Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbstart" >> $LOG 2>&1
Thanks in advance for your urgent help.
--Smb

Thanks for your reply, actually I have already set the value of $ORACLE_HOME to the correct value as per my installation, sorry that line was cut when I last time pasted the chunk of my /etc/init.d/oracle file because I only wanted to paste the relevant portion of that file.
But here is the complete /etc/init.d/oracle file that I have below, please suggest what might be wrong?
thanks.
#!/bin/sh
# chkconfig: 235 99 01
# description: controls Oracle database startup and shutdown
ORACLE_HOME=/u02/app/oracle/product/9.2.0
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
ORACLE=oracle1
export ORACLE_HOME PATH
LOG=$ORACLE_HOME/startup.log
touch $LOG
chmod a+r $LOG
case $1 in
'start')
echo "$0: starting up" >> $LOG
date >> $LOG
# Start Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "Shahid starting Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl start" >> $LOG 2>&1 &
fi
echo "Shahid starting Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbstart" >> $LOG 2>&1
'stop')
echo "$0: shutting down" >> $LOG
date >> $LOG
# Stop Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "stopping Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl stop" >> $LOG 2>&1
fi
echo "stopping Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbshut" >> $LOG 2>&1
echo "usage: $0 {start|stop}"
exit
esac
exit
########################################################

Hello. I am receiving "error codes" when trying to dowload songs. It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online. Help?

Hello. I am receiving "error codes" when trying to dowload songs. It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online. Help?

I don't know exactly what they said b/c they are nolonger on my screen. It said something to the effect of "incomplete dowload, there was an eror during the dowload of *Song*".
The songs purchased were showing in my purchased list with an "exclamation point" by them, which I believe indicates the download was incomplete. I restarted iTunes and the songs are no longer on my "Purchased list".
I was still charged after restarting iTunes

UM Service Does Not Initially Start

Hi, everyone!
Whenever our Exchange 2010 server is restarted, the UM service will not initially start. However, it will start when I then go to manually start it.
Based on the error logs, it seems like it may have something to do with DNS. The error mentions how 10.4.50.1 resolves to an invalid FQDN. 10.4.50.1 is the IP address to the PBX Gateway, which is the address entered into Exchange's UM Settings. No where
in the settings did I use the FQDN, which is why this error does not make sense to me.
I'm wondering if it's simply the service trying to start too soon prior to the network connection being fully established? We're running this on VMWare 5.5. Also, this PBX Gateway is across a VPN, but it's not an accessibility issue as all other traffic
to the Gateway is flowing properly.
I was hoping someone may have an idea on what to try.
It's not a huge deal because I wrote a PS Script that will check if the service is running and attempt to restart it, if it's not. This solves the issue, but it's more of a patch then a plug and I'd rather have things operating "normally."
Thanks in advance for any suggestions!
-Eric

Alright... well, we had to reboot the server and I checked when the server started back up to verify that the UM service started properly. It still did not, despite being set to Delayed Start now.
So I'm back to being unsure of what to try. I set my PS Script to run at startup and it checks every 15 minutes to ensure UM is running.
It's more of an annoyance that I'd like to not have, but again, not the end of the world.
If anyone else has any ideas, I'd be really grateful.
Thanks!

ITunes does not automaticly start on connecting iPhone.

As above really, when i connect my iPhone 3G iTunes does not automaticly come up and sync the phone like it used to.
I now have to connect the iPhone and them click on iTunes.
Any ideas how to change this back, i've checked the iPhone settings in iTunes and 'Automaticlly sync when this iPhone is connected' is ticked.

If you go into itunes preferences, click on devices - make sure that the disable automatic syncing for iphones and ipods is not ticked.

Wireless network does not automatically reconnect after sleep

I have a Belkin wireless G+ mimo modem router network. When I wake the mac from sleep it does not automatically reconnect to my wireless network and i have to manually select the network from the airport icon in the menu bar and then it connects without having to reenter my secure password. How do i set the mac to auto connect to the network after sleep? There are about 6 other wireless networks in range which may be effecting this reconnection.

In may case the network was already at the top of the preferred networks list.
Based of of a hint over at MacOSXhints.com, here's how I fixed this problem:
1. In the Network references pane, delete the Airport connection that does not like to reconnect.
2. Click Apply and Quit the System Prefs app.
3. Put the computer to sleep.
4. Wake the computer.
5. Go back in to the Network pref pane and re-add the Airport connection. Do not try to connect to the network at this time.
6. Click Apply and Quit the System Prefs app.
7. Use the Airport menubar app to connect to your network.
8. Verify connectivity
9. Put the computer to sleep.
10. Wake the computer.
11. Verify connectivity
My machine now consistently reconnects when coming out of sleep or restarting.
God luck!

Unable to sync new iPhone 4s. I have iTunes version 10.6.1. Using Windows 7. My device appears on iTunes but I am not able to select the sync option and it does not automatically start the sync option when plugged in. Ive tried reseting the device.

I am unable to sync my new iPhone 4s OR my iPod Touch 4 to iTunes.(this is the first time I am plugging them into iTunes) I have version 10.6.1. Both devices are up to date with the latest software version. Once I plug the device in, it is recognized on iTunes.The synce process does not start automatically. I am unable to select the sync option. I've tried reseting the device and restarting iTunes and the same problem happens. I have plugged in my husbands iPhone 3gs and the sync process starts automatically. I have also added my computer as an authorized computer for the new devices. What now?

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Z510 : bluetooth does not connect but after reboot

Hi, My Z510 never connectss to bluetooth but after a reboot. Activating/deactivating bluetooth does not work. Any tip ? Cheers,/D

I received the following response from Nokia support:
"Thank you for emailing the Nokia Care Center.
In response to your inquiry about your Nokia N8-00, we would like to inform you that even when you set the automatic connection between the two devices, you will still need to connect manually because the Automatic connection is used for you to not to enter a passcode anymore whenever you connect your device to your Bluetooth device. For verification, visit the link provided below and kindly go to page 98:
http://nds1.nokia.com/phones/files/guides/Nokia_N8-00_UG_en.pdf
However, rest assured that your suggestion will be taken into consideration for our future reference. We are hoping for your understanding and patience regarding this matter.
If you have any additional questions, please do not hesitate to contact us again. To ensure proper handling of your case, kindly continue using the current subject line.
You may check out all the phones and accessories and purchase them online through www.nokiausa.com. For further inquiries, you may call our Sales Department at 1-866-596-6542 and we will definitely be of assistance in finding the product for you.
Thank you for your e-mail."
In summary, Nokia thinks this annoyance is an intended "feature". This issue is NOT solved.

My Mighty Mouse does not turn on after reboot after my Snow Leopard upgrade

I am having issues with my wireless mighty mouse, it does not turn on automatically like it used to and now I have to turn it on and off for my Mac to see the mouse again. It will them connect any help?

Hello dw:
For future reference, there is a Bluetooth forum here:
http://discussions.apple.com/category.jspa?categoryID=145
Also, go to system preferences>bluetooth. Highlight your mouse. Click on advanced. Click on the little gear at the bottom>show more info. Then click on the gear again and make your mouse a favorite.
If that does not help, try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

ITunes does not automatically start up when iPhone is connected.

Usually, iTunes and the camera options started up when my iPhone was plugged in. Now, only the camera options start up, and iTunes doesn't. It recognizes my phone when i turn on iTunes, but how come it doesn't automatically do it anymore?

I had the same issue with Windows Vista. I would plug in my iphone after the new Itunes update and Windows would say "found new device" and try installing drivers. It would then report it failed. I looked under device manager and saw that it was listed as a camera device. I followed the steps found in the following url, and now my iphone is synching. I hope it works for you.
http://www.ankurshah.net/blog/?p=20

Startup Disk Does Not Automatically Start on Boot

I have a problem booting my system. Everytime I boot or restart my macbook pro, it always shows a selection of what disk to use instead of directing to login page and it's annoying. I already set my startup disk on system preference but doesn't work. I also tried using disk utility and repair the disk and its permission and still didn't work. How can I fix this?

Angelo Suerte wrote:
I have a problem booting my system. Everytime I boot or restart my macbook pro, it always shows a selection of what disk to use instead of directing to login page and it's annoying. I already set my startup disk on system preference but doesn't work.
Did you lock the padlock?
I also tried using disk utility and repair the disk and its permission and still didn't work. How can I fix this?
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.

VS 2012 does not finish starting after installing ODAC 11.2 Release 5

I installed the ODAC 11.2 Release 5 (11.2.0.3.20) with Oracle Developer Tools for Visual Studio. When VS 2012 restarts the splash page comes up with a message to wait while an operation completes but it never does. Does anyone have an idea as to what the problem may be?
Running Win 7 Pro with VS 2012 Ultimate.
Paul

I would like to add some additional information to the above post. I am receiving the same error using the new release. The beta release worked fine. I completely uninstalled the beta and then installed the new release. Once installed, VS2012 stopped working. The splash screen comes up and then the little box stating that it is waiting for a background process to complete is displayed. That is it. From what I can tell, it is in a userwait state.
Unfortunately, when I uninstalled the component, it left some artifacts behind. When I now start VS2012, I get errors stating that Oracle ODT did not load correctly and then VS2012 stops working and exits. I am running VS2012 as administrator.
This behavior is exhibited on both Windows 8 and Windows7 Home Ultimate (both 64bit) and VS2012 ultimate.
The activity log shows what is giving the error, shows the following:
<entry>
<record>270</record>
<time>2012/09/17 11:57:57.734</time>
<type>Information</type>
<source>VisualStudio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>271</record>
<time>2012/09/17 11:57:57.738</time>
<type>Error</type>
<source>VisualStudio</source>
<description>CreateInstance failed for package [Oracle Developer Tools for Visual Studio]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80070002</hr>
<errorinfo>Could not load file or assembly 'Oracle.VsDevTools.11.0, Version=4.112.3.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
<entry>
<record>272</record>
<time>2012/09/17 11:57:57.738</time>
<type>Error</type>
<source>VisualStudio</source>
<description>End package load [Oracle Developer Tools for Visual Studio]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
<errorinfo>Could not load file or assembly 'Oracle.VsDevTools.11.0, Version=4.112.3.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
The above entry was thrown when VSDevTools had been removed from the system.
Unfortunately, I did not get any information about what exactly was causing the wait state when the Dev Tools for VS was installed. From Process Explorer, I could see that msenv.dll was chewing through cycles, waiting for multiple objects. I have stack prints for devenv.exe and msenv.exe as well as a thread screenshot if anyone is interested in seeing them.
Hopefully this will shed some light on what needs to be fixed.
Thanks,
Craig D.

IPAD3 does not automatically update after deleting a contact from Outlook 2010 over ICloud

I've noticed that when deleting a contact on my IPAD 3, it automatically deletes the contact on my PC (Outlook 2010 set up for ICloud). However it doesn't work or update the other way around.
I can edit an existing contact on Outlook, or add a new contact on Outlook, and that always updates on the IPAD3.. But it doesn't update on the IPAD when deleting from Outlook which is strange.
If I delete all the contacts on the IPAD and then re-sync once again to ICloud, then it is as it should be and any previously deleted PC contacts, do not show on the IPAD.
Any thoughts as to what might be happening?

Hi Kumar,
Please remove the codeline $List.Update();, then run your code again, it works for me.
You may need to firstly delete the synced contacts list within Outlook to remove those undeleted accounts, then re-connect the SharePoint contacts list to outlook, then run your modified Powershell code.
Thanks
Daniel Yang
TechNet Community Support

ITunes does not recognize iPhone after reboot

Windows XP SP3, iTunes 10.6.1.7, iPhone 3g v.4.2.1
Running on a Windows XP machine, iTunes will not regonize any one of 3 iPhones plugged in to any one of 4 USB ports using any one of 3 different USB cables.
If I uninstall, then reinstall iTunes from its setup file, all the iPhones are recognized on any USB port with any cable and all can sync successfully with no errors.
But, if I reboot the machine, iTunes no longer sees any of the iPhones plugged in to any of the USB ports again even though they appear as devices under My Computer and you hear the normal two tones indicating successful device connection. The only way to have the iPhones appear in iTunes is to uninstall and reinstall iTunes again each time after the machine is rebooted.
Does anyone have a suggestion as to what could be causing this and how it can be fixed?
Thanks,
Chris.

Thanks for the suggestion. I tried stopping and restarting Apple Mobile Services, Bonjour and iPod services but it had no effect. The problem still remains - everything works for all 3 iPhones immediately after reinstalling iTunes but none of them can connect with any of the USB cables after a reboot. This problem is still present as of upgrading to 10.6.3.25.
BTW, I do have other choices. I can become disenchanted with the product, use it less and less, then eventually migrate over to some competitor's product.
Cheers,
Chris.

Bookmarks get changed randomly / Bookmarks Bar does not stay showing after reboot

This is a brand new installation of FireFox 17.0.1 download directly from Mozilla. The previous installation was completely removed using Revo in an attempt to find the cause of this problem.
I have my bookmarks saved to a .json file so after full installation of FireFox, I rebooted the computer, came back into FireFox, enabled the Bookmarks Bar and imported my Bookmarks. Looks good so far. Then I shut it down and rebooted the computer. The bookmarks are gone, the FireFox size is back to default, and the Bookmarks bar is no longer showing.
In my previous installation, sometimes the bookmarks were there, sometimes they weren't. But even when they were, the actual URL that the bookmark was supposed to go to had been changed to some site that was opened at some point during the previous session (but not bookmarked).
The same types of problem do not occur in Opera, Safari, Chrome, or IE so I don't believe it is anything interfering with the saving of customizations.
Anyone have any ideas?

Bookmarks shouldn't have been changing by themselves. Your places database (which stores history and bookmarks together) might have been corrupted. Your new installation should not have that problem, at least not right out of the box.
Sometimes Windows permissions, files in use, or other factors can cause Firefox to lose changes or start up incorrectly. This article might help: [[How to fix preferences that won't save]].
Are you just running the standard release of Firefox directly on Windows? In other words, I assume:
* It's not the "Portable" edition of Firefox.
* You are not using sandboxing or virtualization software that isolates Firefox from the system.

ADFS 2.0 service does not automatically start after reboot

Similar Messages

Maybe you are looking for