Adge animate does not work in Opera and Google Chrome

Hello, sorry my english is bad.
My Adobe Edge animation chromium displayed incorrectly in Opera and Google.
In Internet Explorer, Safari and Firefox, the animation plays correctly.
where could be the problem. All browsers are up to date.
Hallo, mein englisch ist leider schlecht.
Meine Adobe Edge Animation wird in Opera und Google Chrom falsch angezeigt.
Im Internet Explorer, Safari und Firefox wird die Animation richtig abgespielt.
Wo könnte das Problem liegen. Alle Browser sind aktuell.
Linkt to Animation!
http://www.lucom-demo.de/brauerei/edge_tropfen/startanimation_tropfen.html
Screenshot
Thanks Frank

Danke. Leider weiß ich auch nicht warum die Animation bie mir falsch angezeigt wird. Aber ich bin beruhigt das es wohl scheinbar funktioniert. also muss das Problem irgendwo bei mir liegen. Ich werde alles nochmal prüfen.
Thank you. Unfortunately, I do not know why the animation is displayed bie me wrong. But I am reassured that it seems to work well. So the problem must lie somewhere with me. I'll check everything again.

Similar Messages

Fingerprint does not work in connection with Google Chrome - solution?

My Fingerprint Sensor doesn't work in another Explorer than IE. I want to use it as well with Google Chrome (some Applications run better there).
Any workarounds?

What fingerprint software do you use? Is it from AuthenTec?
Here the page from Authentec:
http://authentec.com
It seems that the last version supports the Internet Explorer, Firefox and Chrome

Adobe Fourms does not work with Opera too well

Adobe Fourms does not work with Opera too well. I have to use in Opera "Identify as Firefox just to post this message!
I also have run into the same junk with Hotmail.
Web Design Tip: Always code for Opera and all other browsers will fall in line most of the time.

dave milbut wrote:
of course you're right east texas. hadn't noticed that. bad bad adobe. someone smack them with a rolled up news paper on the snout!
I've installed a button in my Firefox tool bar to toggle iFrames on and off through a Firefox add-on called "Toolbar Buttons".
The forum Reply Editor does not work when iFrames are blocked, so I need to toggle them back on when posting, then back off. I imagine that's better than having them on all the time.
Message was edited by: Ramón G Castañeda

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Airplay does not work with slideshows and music - get the slides but no music with iPad Air2 and ios 8.1.22

iPad Air 2 with celluar with ios8.1.2 will not airplay with apple tv slideshows with music. I see the slides on the TV but do not hear the music. This works on the iphone 5s with iOS 8.1.2 and with my other iPad which is on iOS7.
This problem was reported on Nov 21, 2014 and other people had reported it prior to me.
When will this be fixed by Apple - it worked in the past and does not work now.
Should i return my iPad Air 2 and get my money back?

Problem seems to be resolved. Should have thought of it myself ;-) thanks so far!

Despite my spell check being set, it does not work in Hotmail and some other websites.

I have the setting for spell check set up but it does not work on some sites like hotmail. I go to the spell check button in hotmail and it tells me that my browser will automatically check as I type but it doesn't. I've searched to override this or to get the spelling checked independently but without any luck, Any suggestions?

Not all locales come with a dictionary installed for licensing reasons.
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions).
You can see which dictionary is selected if you right-click in a text area and open the ''Languages'' submenu.
Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.
You can also try to toggle the "Check Spelling" item off and on again.
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]
See also http://kb.mozillazine.org/Dictionaries
You can look here for more dictionaries:
https://addons.mozilla.org/firefox/browse/type:3
https://addons.mozilla.org/en-US/firefox/addon/3366 (English (British))

WCCP does not work between WSA and ASA

I have configured WCCPv2 between WSA S160 ( 6.3.1-025) and ASA5540 (8.2(1)109).
Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
Does anybody have any idea what the problem is and how I can resolve it ?

IronPort Support team helped me to find the trouble:
If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
The WSA guide doesn't clearly say about it.
So the Discussion can be closed ...

One speaker of my i phone 4s does not working any more and my phone still new ?

One speaker of my i phone 4s does not working any more ? and it s still new !

There is only one speaker, other side is microphone. You
may wish to download and become familiar with the user guide.
It is a link in Safari on your iPhone, you can download the user
manual after you download iBooks app, or you can find it here:
http://support.apple.com/manuals/#iphone

Since I have upgraded to Firefox 4.0.1, it has been constantly freezing up. Now it does not work at all and I am unable to remove my profile. How can I remove my profile if Firefox does not work?

I finally got so tired of Firefox freezing my computer that I tried to uninstall and reinstall. Upon reinstall, it will not work at all and I am unable to delete my old user profile. Is there any way to get rid of this profile so I can give one last attempt to get Firefox to work before switching permanently to Google Chrome? I really liked Firefox for years until they screwed it up with the recent changes.

Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

DHCP Server does not work after Exporting and Importing Using Netsh Command

Hello Friends :
I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
srv-1 : windows server 2003 + DHCP = working with no problem
srv-2 : windows server 2003 + DC + DHCP = Worked without problem
srv-3 : windows server 2008 R2 + DC = worked without any problems
I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
1- I have authorized it
2- I used Rogue Checker tool in client computers they see authorized server without any problems
3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
4- Bindings are OK and DHCP servers only have one NIC installed on them
What can i do to make sure my srv-3 DHCP server will work on the network ?
thanks ...
MIMO

Are the clients on another network so you need to configure a DHCP relay agent?
If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
Have you check event viewer for any warnings or errors?
And the classic one restarted the dhcp server service (or reboot)?
Regards Per-Torben Sørensen http://pertorben.wordpress.com/

CC does not work after Uninstall and reinstall

Adobe 24/7 help online does not solve the problem. They come up and said to uninstall all, and as the result, I can not access ALL my software. Please help. Error message screen shot attached below.
This is on Home PC, OS: Windows7, 64bit, Core i5, 3.1GHz, 8GB RAM, was working properly more than a year or two. Now, I can not see ALL apps and the only see the "spinning wheel" for 10 minutes and shut down.

The Online chat support team ask me to do these stepts:
1) End all the Adobe related processes from the Task manager like Adobe CEP Helper,AAMupdater, AAMupdater notifier, Adobe Crash demon process, Coresync ,Creative Cloud.
2) Deleting the folders in various locations
3) Install the Creative Cloud Cleaner (.exe file) and run, clean ALL CC things
4) they give me a link to download and reinstall the CC
5) at the end, all the same problem. giving the same message as before "Microsoft Visual C++ Runtime Library - Runtime Error! Program: C:\Program Fi... "This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team...."
Also, the support guy ask me to uninstall ALL CC Apps and I did it. NOW I have nothing left on my computer and I can not work. HELP

Tried to update the software on my i pod touch and now it does not work at all and wont restore either

tried to update software on i pod touch but would not work and now ,wont restore back to factory setting or anything

Without more information all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Adge animate does not work in Opera and Google Chrome

Similar Messages

Maybe you are looking for