Adhoc Approvals for DMS

Hello All,
I have a 'Document Type' and I want to give users Adhoc capability to select multiple reviewers to approve a document, when document is set at document status 'For Review'. firstly how can I select multiple reviewers in an adhoc manner. How to achieve this solution. Is their a user exit.
Thanks,
Sachin

Hello Sachin,
I think, this can be achieved in following ways along with proper use of workflow-
1) You can use classification and varient configuration to achieve this.Class can be assigned to document type through configuration and dependancies can be set to select proper group of reviewers, to whom, workitems can be triggered for review
2) Status network- You can set proper status network eg "Create->Review Design->Rview Engg->Review Marketing->..->Release so that with proper status, e-mails can be triggered to correct approvers.
Similar to classification, you can also use  Z-Table, Lab/ Office Field, Authorization Group field, Org Structure or Popup for user selection in workflow.
Regards,
Milind Dumbre

Similar Messages

  • Standard Package available for DMS in EP

    Hi,
    Is there any Standard package available for DMS in EP?
    If No, then what are the alternative possibilities to access DIRs from web apart from WEB DMS.
    Regards
    sham

    Im not sure but
    you can use iViews for accessing web dms just like cFolders or cProjects....
    Niranjan

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

  • Adhoc query for IT0041

    I was told that it is possible to create a separate 'Date for Date Type' for each 'Date Type' in the selection criteria of an adhoc query for IT0041. Can somebody help me with this please?

    Hi Sven
    Thanks.
    I created it with PCH , but very few fields are visible for IT1001
    Hence if I want to find chief of Org unit A, then I cannot find it as 'Relationship type/relationship' field of IT1001 is missing here.
    Basically I need all the fields which are displayed in IT1001 as shown below:
    Need your help to find the way out. Thanks
    KP

  • Using a single Content server for DMS and also for Archive link documents

    Hi,
    We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
    so here the question is
    can a single content server be used as a content repository for Both DMS and archivelink,
    can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
    is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
    Thanks and regards
    Sathish

    Hi sathish,
    -- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
    -- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
    -- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
    Depending on your requirements,(if u have limited documents or with low requirements)  you can use the same content server for both DMS and Archivelink.
    The number of documents stored on the content server is limited only by the size of the database.
    Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
    U can also refer to the below thread :
    How to Archive SAP DMS Data?
    hope this helps....
    regards
    kavitha

  • Purchase order approvals for Negative amount

    Hello All,
    Want your assistance on the above mentioned topic.
    We have a business requirement to have Purchase order approvals for Negative amount. I understand from the Below SAR that JD Edwards 9.1  doesn't support PO approvals on Negative amount
    Bug 11022294 : APPROVAL ROUTES FOR DEBIT MEMO - SAR: 8940968
    Appreciate if you can suggest best practice or workaround to meet this requirement.
    Thanks & Regards
    Nikhil M. Pawar.

    Dear Ashutosh,
    Couple of points from my side. We have a similar scenario at a client where I am working. In construction, there are three stages.
    a) Practical Completion
    b) Partial Completion and
    c) Final Completion.
    In the case above, you are not deducting an amount from existing PO, you would be applying a penalty on the Vendor for Failure for not meeting the Practical/Final Completion Certificate requirements. Based on the legal understanding, usually the penalty may vary above and beyond of 10% of value of work not done/ delivered. (This is company to company)
    So we establish that the scenario above is not a case for PO, but for Penalty. Now penalty in construction business again is of three types (My understanding again from experiences)
    a) Time/Schedule based penalty - Levied on vendor due to delays (Ranging for 100 SAR/ Day to 400 SAR/Day - if you are in Saudi)
    b) Cost/ Quantity Based penalty - Deviation from Standard Plan/ over consumption against budgeted quantity in Bill of Ladding
    c) KPI/ Quality Based Penalty - This can be a levied for number for reasons, including non completion of agreed deliverable in Contract. (This can be even 150% of contract value)
    Now, penalty is a revenue to the Organization so this needs to be accounted differently. You apply a Penalty against a PO and create a Debit memo and show the penalty as revenue in the books. This cannot be done if this is entered as a PO.
    So, my point is, you need a customization to capture the penalty and apply it against the PO and account it as a debit memo in Finance side.
    Please let me know your thoughts, I will be glad to hear if I need to be corrected.
    Rgds,
    Abhi

  • Adhoc query for HR.

    Good Morning
    I am creating a adhoc query for HR.
    I create an Infoset in the T.Code SQ02, I am using the database PNP , add code abap for get data of other table in the field additional ZKTEXT in the the code section record processing.
    In the moment of Generate the infoset, the system display the following message of warning
    Additional Fields
    **No code exists for additional field ZKTEXT,
    However the adhoc query work fine and get the data of the field ZKTEXT.
    1. The question is, There is some form in where the system no display this message of warning in the moment of generate the infoset?
    2. In this moment the field ZKTEXT is as a field of output in the Adhoc Query , But There is some form in where el field ZKTEXT. is as field of selection. ?
    Regards.
    sanew2

    *$HR$ [COMMON].
    *$HR$ PERSON_ONLY_ONCE = 'X'
    Regards

  • Adhoc query for Training & Event mgmt

    Hi,
    Can anybody guide me for design the adhoc query for training & event management. I needto extract data upto attende level from a particular infoset.
    Thanks
    Dadarao.

    Hi,
    I have got a query in AD-HOC query.
    After creating the Adhoc query using the join table functionality the resulting adhoc query does not results any out put.
    What I have done is :
    1.Created a user group through SQ03
    2.Attched user to My user group
    3.Created an infoset using join table functionality(SQ02).
    4.Saved and generated the infoset
    5.Added the user group to the infoset and than run the ADHOC query.
    The table I have used to join is all PA table (For test pupose)
    Though the purpose of the custom infoset is to join PA,OM and E rec infotypes, for testing purpose I have joined only PA infotypes.
    Result:The adhoc query does not gives any out put instead it says no data could be read.
    Could you please tell what else I need to do so that the custom infosets gives an out put.
    Will greatly appreciate your help.
    Thanks and best regards
    Rajeev

  • Adhoc Query for Qualifications.

    Hi Guys.
    Can some body help me creating an Adhoc Query for the active employees whose Qualifications along with there Name reflects, can somebody guide me in this regard.
    Regards,
    Venkat.

    Hi Venky,
    You can pull the qualification details using SAP quick viewer (Tcode SQVI) and using logical database PNP
    -> Go to Tcode SQVI
    -> give Query name and Create
    -> In the data source field, select Logical database
    -> In logical database give PNP or PNPCE
    -> Then in basis mode u can find IT 0024 in Planning data header
    -> and then select the list fields u need and the additional selection criteria also
    -> Then execute the query.
    With smile,
    Venkatesh kumar

  • Hyperlink for DMS

    Hi,
    I have to create a hyperlink for DMS document No. How can I do this.
    I was told this can be done by calling transaction CV03N, but not sure to do this. Please help.

    I have used the following code to implement this:
    CLASS LCL_EVENT_RECEIVER DEFINITION.
      PUBLIC SECTION.
        METHODS:       HANDLE_HOTSPOT_CLICK
                                             FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID  IMPORTING E_COLUMN_ID.  
    ENDCLASS.   
    CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
    METHOD HANDLE_HOTSPOT_CLICK.
        PERFORM MOUSE_CLICK USING E_COLUMN_ID.
      ENDMETHOD.
    ENDCLASS.  
    FORM MOUSE_CLICK USING E_COLUMN_ID TYPE LVC_S_COL.
      SELECT SINGLE DOKAR FROM DRAW INTO T_DOKAR WHERE DOKNR = E_COLUMN_ID.
        SET PARAMETER ID :  'CV1' FIELD E_COLUMN_ID,
                            'CV2' FIELD T_DOKAR.
        call transaction 'CV03N' AND skip first screen.
    ENDFORM.
    I get the field name instead of the value in "E_COLUMN_ID", and therefore the "CALL TRANSACTION" fails.
    what am I doing wrong, please help...

  • Server Config for DMS

    Hi All,
    We're having SAP ERP ECC 6.0, and are going to implement DMS soon. Can anyone guide me about server configuration required for the same.
    Can we use 32bit servers for DMS and integrate it with existing 64bit servers for ERP?
    Ashish

    Hi,
    DMS is part of ECC 6.0, you will only need content server to store DMS documents. It is possible to use 32 bit content server which talks with SAP (your 64 bit install) through http protocols. You need to plan one server for content server, on the same server you can install TREX search engine provides the RAM permits it.
    Anirudh,

  • BAPI calls for DMS in CRM system

    Hi,
    What BAPI calls are available on CRM system to support DMS? Where can I find more info on this?
    Regards,
    Naveen

    Interesting question.
    A survey of transaction bapi reveals no DMS bapi's in CRM2007. However, In SPRO there are controls for DMS and transaction CSADMIN can also be found in the system.

  • Approvals for transporting XI objects

    Does anyone have documentation on how your companies are handling approvals for transporting XI objects? I need to prepare a change management document that will be SOX compliant and wanted to know how everyone else is handling approvals? Any suggestions are greatly appreciated.
    Thanks,
    LeAnne Fulton

    I know Satish has answered your question, but just to add some more info to it , have a look at this
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    From above link :
    <i>Prerequisites
    During the export, a packaged binary file is created in a directory defined on the repository server (or directory server). To import this file to another Integration Repository (or Integration Directory), you must manually copy it to an import directory (see below). <b>You require the appropriate authorizations to be able to access directories on the SAP Web Application Server.</b>
    </i>
    thanks,
    Pooja
    PS: Award points for helpful answer

  • Approvals for online tax form (w4) and manage payroll payments in SSHR

    Can someone throw ideas how to build the approvals in workflow?
    Oracle did not provide approvals for both the functions W4 and Manage payroll payments(change/modify payment methods)

    Can somebody Please help with the request?
    Edited by: user4373967 on Mar 2, 2009 4:56 PM

  • System landscape for  DMS Repository in KM

    Hi All,
    When I create a System Landscape for DMS Repository in KM which sytem template I should choose?Should I choose
    'SAP system using dedicated application server' or anything else?

    The problem is resolved.

Maybe you are looking for

  • How can I import outlook contacts in my icloud?

    I exported outlook contacts as csv and xls  - but there is no way to import them all at once in my icloud contacts. How can help?

  • A new approach to JSF error handling?

    Hi. I would like to run an idea by the community to check that I am not being crazy in doing this stuff. I would appreciate any comments, criticism or ideas. I was thinking about JSF's error processing mechanism, specifically about how label text get

  • Using java classes in jsp

    hi everybody I'm using Apache Tomcat 5.5.7 and I want to develop very very simple jsp-files. I have a java class file called MyClass. When I start the jsp file with the code line MyClass class = new MyClass(); I get this error: MyClass cannot be reso

  • How do I view the play, pause bar at the bottom of a project, on a .exe captivate file?

    Hi, I have saved one of my captivate projects in a .exe format. When I view the project in full screen, the play, pause bar at the bottom of the screen disappears. We have tried changing screen resolution but it hasn't helped. Can anyone assist with

  • HT1689 Copy of my purchase invoice

    I need a copy of my purchase order (invoice) for an insurance issue I have, somebody able to guide me in the right direction? I do have the serial number.....