Adhoc Query Execution / Portal Authentication

Hi there,
When executing an adhoc query via the query designer I am asked to authenticate via the portal before the query is executed.
Is this the way it should work in netweaver 2004s ? Or do we have a communication problem between portal & BW?
My portal consultant wasnt really able to give me any ideas.
thanks
Mark

Hi,
You have any Idea on the User Administration mapping done in the Portal Iview?
I guess the Single Sign On done is not proper (SSO).You can achive this in the User Administration Properties of the System Created in Portal for BW. Portal Consultant will be the best person who can solve this.Else you can get the help of Basis who takes care the SSO.
Regards
Happy Tony

Similar Messages

Adhoc query designer

Hi All,
Is adhoc query designer (Portal) supports 7.3 version? we have 3.x version
Thanks in advance
Regards,
Ravi

Hi,
Ad-hoc query designer is removed (BOBJ WebI fulfills this need).
The use of WebI can be through LiveOffice, BICS, OLAP & SQL Universes, QaaWs and Data Federator for accelerated (BWA) or non-accelerated ad-hoc querying (can also be used for any 7.x system)
Thanks,
Venkat

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

Query execution time

Dear SCN,
I am new to BOBJ Environment. I have created a webi report on top of bex query by using BISC connection. Bex query is build for Vendor Ageing Analysis. My bex query will take very less time to execute the report (max 1 min). But in case of webi is takeing around 5 min when i click on refresh. I have not used any conditions,filters,restrictions are done at webi level all are done at bex level only.
Please let me know techniques to optimize the query execution time in webi. Currently we are in BO 4.0.
Regards,
PRK

Hi Praveen
Go through this document for performance optimization using BICS connection
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0e3c552-e419-3010-1298-b32e6210b58d?QuickLink=index&…

An error has occurred during report processing. (rsProcessingAborted) Query execution failed for dataset 'dsPriority'. (rsErrorExecutingCommand)

click report error:
log file:
processing!ReportServer_0-2!104c!04/27/2015-19:15:21:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing.
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'dsPriority'.
---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Query (26, 25) The ALLMEMBERS function expects a hierarchy expression for the argument. A member expression was used.
   at Microsoft.AnalysisServices.AdomdClient.AdomdDataReader..ctor(XmlReader xmlReader, CommandBehavior commandBehavior, AdomdConnection connection)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeParameterDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.ProcessConcurrent(Object threadSet)
   --- End of inner exception stack trace ---
open http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=ProcessWarehouse click Invoke:
System.Web.Services.Protocols.SoapException: TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. : 2015-04-27T19:30:29:782 ---> System.InvalidOperationException:
TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. at Microsoft.TeamFoundation.Warehouse.WarehouseAdmin.QueueJobs(String collectionName, String jobName)
at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName, String jobName) --- End of inner exception stack trace --- at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName,
String jobName)

Hi shelman,
I'd like to know whether you configured TFS reporting service properly, and if you can get the report normally before. From the error message, you might has wrong data source or the parameters of the dataset 'dsPriority'. You can check whether the data source
for your report is available, try to use windows authentication. Or check the parameters of dataset 'dsPriority' make sure the query works when you execute it manually.
To process the TFS data warehouse and analysis services cube, I'd like to know which operation you selected before clicking Invoke button. Please follow the instructions on this
page to process TFS data warehouse and analysis service cube manually. You can also refer the James's last reply in this
thread or this
blog to check if the solutions work for you.
Another option is run TFS best practice analyzer to check if there any configure issues on your TFS server machine. And check event logs to see if there any useful information, elaborate more details about your scenario including reproduce steps if the problem
persists.
Best regards,

Finding number of working days during query execution

Hi ,
We have a requirement to calculate number of working days during query execution. In the cube we got "received date", this will be used as a variable in the query. Based on the received date value entered, query needs to display number of products received from past 1, 2,3,4 days (working days should include weekends or public holidays).
1day 2 days 3 days 4 days 5 days
10 12 20 15 20
to me it appears as I need to create virtual key figures.
Regards,
Ramz

Hi ramesh,
First try to create formula variables for start data and end date to calculate the no of working days.
Create a Variable ZSTDT --of type replacement path.
Type of Variable = Formula
Variable Name = ZSTDT
Characteristic = <info object>
For Intervals Use = Select From Value
Offset Start = 0000 Offset Length = 0000
Replacement var with : key
use the same steps to create one more formula variable to get end date.
Now create a formula to get the No of days.
once after getting no of days you can create buckets as per your need.
for more info check the below links
http://www.sd-solutions.com/SAP-HCM-BW-Replacement-Path-Variables.html
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?quicklink=index&overridelayout=true

Adhoc Query on MSS Report

Hi Experts,
Would like to know, how to add Adhoc query on MSS reports? Tried to search the thread but couldn't find anything.
Really appreciate kind guidance on the same.
Thanks,
Aashish

Hi,
You can remove it by following ways
Go to SPRO
Then follow following path
Integration with Other mySAP.com Components -> Business Packages / Functional Packages -> Manager Self-Service (mySAP ERP) -> Reporting -> Set Up LaunchPad
and execute
then you can get the list of the REports
over there you can see "Birthday List" Report and Deactivate it
Please execute this steps before the executing the steps i have mentioned above, this will activate the reports used for MSS. Then gofor moving the unwanted reports unactive folder. Just what you have to do it select the unwanted report and move it down to the inactive folder.
1. In the SAP HCM System choose:
SAP Easy Access Menu
Transaction SE38
2. In the ABAP Editor: Initial Screen enter the Program FPB_LP_WRITE_ENTRIES and choose Execute.
3. In the Report FPB_LP_WRITE_ENTRIES screen select the MSS Reporting and MSS with Folders options and deselect the checkbox Test Run.
4. Choose Execute. The sample entries are entered in the Report Launchpad in the portal.
5. Log on to the portal with User manager1 and check if the sample entries are displayed.
6. In the ECC system leave the transaction and go back to the SAP Easy Access Menu.
7. Enter transaction PWPC_CONV_MDT_TO_LPA in the Command field.
8. In the Report to convert MDT table entries to LPA table entries screen, enter the MDT Scenario RPT0 and deselect the Test run checkbox.
9. Choose Execute. The list in the next screen shows the reports which have been added to the Report Launchpad.
Do not forget to select MSS with Folders for the FPB_LP_WRITE_ENTRIES report. Otherwise you may get short dumps while editing the report launchpad, because the reports coming from the Manageru2019s Desktop do not have folders.

Issue with Broadcasting and Publish query to Portal from query Designer

Dear all,
I have created a standard template ZWT_STANDARD_TEMPLATE in WAD and I have added this for Adhoc Analysis in 'Set Standard Web templated' RSCUSTV27.
For Broadcasting I have added 0BROADCASTING_TEMPLATE70.
I have problems with my broadcasting as well as publishing the Query in Portal.
When I use a Broadcast to Email - it opens a new window with my standard template(ZWT_STANDARD_TEMPLATE ) I have added. No data though.
Same thing happens for publishing too...When I publish the query to portal from Query Designer or WAD it takes me to the same window with my standard web template. No data though.
I think both are related to the same issue. Its with broadcasting.
What is the default template for Broadcasting in NW2004s? Below is the url I have included when I do it from Query designer. Its actually starting the Command - START_BROADCASTER70 but I dont know if it has to do a SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES. Could anyone compare it with your urls
http://pgdep00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
This is the url for publishing from WAD
http://fndef00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_TEMPLATE=ZWT_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
Any help would be highly appreciated.
Thanks,
KK

Hi KK,
Did you solve your problem, i am also having the same issue. Please let me know if you have solved this issue.
Thanks,
Kumar

BI SDK/XMLA (MDX) - Does the query execution go through SAP BI Accelerator?

Environment : Portal - EP7.0 SPS 14, BI 7.0 SPS17
I have written customer report views which uses the BI SDK to execute BI querries through the portal.
Following link provides the detail about configuring the portal to access the BI system and execute queries through XMLA which used MDX statements on the BI system...
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/e380e03c3a4dbf8cf082f0c910f9cf/frameset.htm
Does the the BI XMLA interface go though the SAP BI Accelerator to speed up query execution? I have provided the link below about SAP BI Accelerator...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537
If the answer is yes, how do I prove it?
Any help is really appreciated.
Thanks
Bhabesh Patel

You prove it because SAP said so:
/docs/DOC-7992#section7
just kidding
You can also run an ST05 trace (with RFC on) and look for the RFC call TREX_RFC_AGGREGATE_SP5

VC 7.0 - Performance during query execution

Hi Experts,
we have built an VC cockpit wich includes ~35 Querys.
When the user opens the cockpit the VC modell starts all 35 querys.
When we start the querys in the SAP BI System (RSRT) they all need less than 1 sek each.
Our BI system is able to handel 40 querys simultaneous.
Our problem is that the cockpit need ~40 sec. until all querys have been finished.
We suppose, that the VC starts all querys seriell instead of parallel.
Is there any configuration where i can switch between parallel and serial mode?
Thanks for your help
Regards
Florian

Hello,
Using the dedicated connection for nested iViews feature, was good thinking.
But - since the execution time of your queries is relatively short compared to the overall time for the "running a query" process, i.e. the HTTP request for execution, creating the connection on portal side, executing the query, returning the result and displaying it on the Flex runtime. --
all the other factors in this equations takes more time (relatively) than the query execution itself. (~1 seconds).
That is the reason why you don't observe major changes between running your 40 queries on a single connection or on multiple connections.
This feature was intended for queries that run for a long period of time. (tens of seconds or minutes)
in such queries, you will see the difference.
Mark,
Visual Composer 7.0 development and maintenance team.

BW statistics: Query Execution Time per User

I am struggling to get something meaningful out of the BW statistics. The only information I really need is:
The time from the first call of a query until the first selection screen and
The time from the execution request until the data is displayed (i.e. after filling selection screen)
With the possibility to see this information by user.
So with other words: KF Duration of query call + KF Duration of query execution, with Characteristics: user, period, query
This could sound like a very simple universal query, but indeed absolutely not straightforward when looking at statistics contents. Any hints on the KF calculations are most welcome.
The BW version in 7.0, with Bex as well as WAD reporting.

I was looking for the same KFs, but did not find anything meaningful in ST03N as well.
But I would recommend to execute the Web Report (from WAD or from Portal, if you are using Enterprise Portal) and then look at table view RSDDSTAT_OLAP. In this table view, BW Statistic data for each step is saved on event level. So if you execute the Web Report, you will find entries for the step corresponding to displaying the selection screen and for the step of generating the Web Report after the selection screen. The column RUNTIME displays the runtime of each step, which is a good indicator for the average runtime KFs you want to have.
Maybe there are more meaningful KFs in technical BI Content, but I did not find them yet.

Methods to reduce query execution time

hi experts
can anybody sugest the steps /methods to reduce the time taken for query execution
Thanks and regards
Pradeep

Hi Pradeep.........
I think u hav already posted a similar thread.........
query and load performance steps
Anyways also check these notes......
SAP Note : 557870............ 'FAQ BW Query Performance'
567746 'Composite note BW 3.x performance Query and Web'.
How to design a good query........
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
Also Check this.......
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
Business Intelligence Performance Tuning [original link is broken]
Query Performance Improvement Tools
Query Performance Improvement Tools
Regards,
Debjani........

Using of Bex Web Analyzer as Adhoc query?

Hi,
can we use the Bex Web analyzer as a preferred tool for designing the Adhoc query?
Points willl be definitely assigned.

Hi Vasu,
You can create an appropriate ad hoc query to specify parameters for Web target iViews.
In logical SAP R/3 Systems of Release 4.6B or higher, transaction SPO0 contains an Ad hoc Query tab. This uses the concept of InfoSets, which are usually based on table joins or logical databases, to create abstract definitions for fields that the system can read. You have to enter parameters for the individual fields. The ad hoc query delivers values that can be passed to the portal.
Transaction SPO0 also contains a buffer for ad hoc queries. This improves system performance by avoiding the need to put together the query every time it is used.
You can delete the contents of this buffer by choosing Delete Buffer for AdHoc Query on the start screen of transaction SPO0. This removes the index entry and the generated queries from the system.
Hope this will help you.
Kind regards,
Praveen

Caching for Web Portal Authenticated clients

Reading CUWN documentation, Sticky Key Caching works only on WPA2-enabled WLANs. Is it possible to enable a caching to help Web Portal Authenticated clients perform intra-controller roaming faster?

Ok, so here's how it works:
When the client gets on the network, the controller contacts the DHCP server and hands the client back its IP (as with any helper address).
In order for web auth to work, you need to open a browser on the client.
When you go to a page (say www.google.com) your browser does a DNS query for the IP address of the site (www.google.com), the controller intercepts the query.
Since you have not been authenticated yet, the controller does not allow the query directly, but it proxies the query to the DNS server you were trying to resolve against. It sources this query from its interface that is on the VLAN the SSID your client is on maps to.
That reply is proxied back to your computer, and then your browser does its normal request to Google?s IP.
The controller then intercepts that request, and sends a reply back redirecting the browser to the controller login page (usually https://1.1.1.1).
Once you log into the web page, you will be redirected back to your original page (www.google.com).
I hope I explained it well. If I wasn't clear, please let me know.
-Eric

How to integerate BEx query with Portal (Java)

Hi folks,
I installed SAP Netweaver 2004s Sneak Preview ABAP+JAVA , Stack 9 for Linux with VMWare test drive. I have configured and enabled BW/BI in Netweaver. I have also configured SLD and its Status is "running" in J2EE engine.
I designed one simple BI application through Tcode: RSA1, and then created Query for data analysis thruogh Query Designer. How can I establish the link between AS ABAP with AS JAVA to publish the query on portal. I want to use BEx Report designer and Web Application Designer, but I can't execute the result on the portal from these designer tools.
Do I need to create RFC destination on both sides ABAP and JAVA, but how , anyone can give an example for the required procudure.
thanks.
Obaid

Hi,
Thanks all of you, Venkatramani Hariharan , with the help of your given link I am able to to apply the part of the configuration from the document as described by the writer.
But on Step No. 6 : Step 6: Import BW Certificate to the Portal
Under Step 6:
I succeeded to complete first 6 steps but from step 7 , author guided me to continue in Visual Administrator and choose <SID>/Server<#>/Services/Security Provider
- Under Component, choose Ticket.
- Choose the Authentication tab page.
- Change the options for com.sap.security.core.server.jaas.EvaluateTicketLoginModule and enter the following values:
like
trustedsys<Number>=<BW_SID>, <BW_CLIENT> (for example, BWP, 000)
u2022
trustediss<Number>=<ISSUER_DISTINGUISHED_NAME> (z. B. CN= BWP, OU=SAP Web AS, O=SAP Trust Community, C=DE)
u2022
trusteddn<Number>=<SUBJECT_DISTINGUISHED_NAME> (z. B. CN= BWP, OU=SAP Web AS, O=SAP Trust Community, C=DE)
But in the window all the modification button(s) are disbale like "Modify", "Remove", "Add New".
So, Is there any way to make those enable to apply the changes. Please help me in this context.
thanks
Obaid.

Adhoc Query Execution / Portal Authentication

Similar Messages

Maybe you are looking for