ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space

Hello guys,
I have a problem with the backup on MaxDB. It always fails with the following error message
ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space
Has anyone faced this problem before? Any solution how could this be solved?
Thanks for your help.
Regards,
Dan

Hi Dan,
Check the TSM server and make sure the primary storage pool that is defined
as your copy destination for the management class you are using is not full
and or you have not run out of scratch tapes. In either case a storage pool
has filled up and cannot migrate data causing the RC11. This is usually what
an RC11 Server out of data storage space means.
I am sharing configuration for Oracle database. You can check similar configuration for MaxDB database.
when i defined the node in my tsm server :
REG NODE hostname_oracle password maxnummp=2, it was defined in standard storage pool, i moved it in other storage.
Hope this is useful.
Regards,
Deepak Kori

Similar Messages

ANS1329S (RC29) Server out of data storage space

Hi
I got the error message below. How do i resolve.
thanking you for your anticipated responses
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on p1 channel at 10/12/2007 00:35:17
ORA-19502: write error on file "alcrm_635733077_24748_1", blockno 40520705 (bloc
ksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: Error received from media manager layer, error text:
ANS1329S (RC29) Server out of data storage space

You cannot expect, that everyone here knows TSM (this is an Oracle,not an IBM forum), so it would be great to give some more informations about your environment.
Message (ANS1329S) is clear, TSM server is out of space. Storage pools may be exhausted or no more tapes available. This is not an Oracle/RMAN issue, you have to contact the person(s) responsible for your TSM environment.
Werner

How do I find out how much storage space I have left on my macbook? can't find info in my "About this mac"

I've been trying to find out how much storage space I have left on my old macbook but I can't find it in "about this mac". Anybody...?

YCGtkd wrote:
tried the right click on MacIntosh and those choices are not avialable
There will be.. after you Click on Get Info... another window will open that contains that information.

Samsung Convoy 3 - Is it possible to store txt message history on the memory card? - Always running out of txt storage space on my phone. I've never gotten close to being able to store 300 messages as indicated on pg 58 of the manual, so I must be missing

Is it possible to store txt message history on the memory card? - Always running out of txt storage space on my phone. I've never gotten close to being able to store 300 messages as indicated on pg 58 of the manual, so I must be missing something.
I might get 35 or 40 and then get storage limit warnings

A_Ohmstede,
I know it can be frustrating seeing that inbox get full and having to delete
stored messages. I do see in the Samsung manual where it advises that it
will store a maximum of 300 messages on the phone. The number may lower
if there are pictures messages and other things being stored on the device.
Have you checked your total Memory available in Settings and Tools? How much is
currently available? Please let us know these details and we may be able
to help further!
TrevorC_VZW
Follow us on Twitter @VZWSupport

Running out of internal storage space! Want to make room by deleting photos WITHOUT LOSING MY PHOTOS! Can I delete the Camera Roll yet still keep my photos in Photo Stream?? Will doing this free up ios storage? Does Photo Stream auto delete ever?

Hello, I am out of internal storage on my Iphone 4 ALREADY (Just purchased 3 months ago!). I need to clear up some space so I can do updates and take new photos. I was thinking about backing up my Photo Stream to the icloud and then deleting my Camera Roll.
1.) Is this a terrible idea??? I do NOT want to lose those photos! But I NEED more space on my phone!
2.) Will deleting Camera Roll free up space (a sufficient amount? My Camera Roll is at 4.5 GB)?
3.) Will deleting Camera Roll delete my photos from Photo Stream also? It doesn't seem to.
4.) Does Photo Stream ever automatically delete photos???
5.) Is there anyway I can save the pictures from my phone to my computer??? I can see the photos on my computer when viewing them through Photo Stream, but those are not permanent, correct?
This is one of the most ridiculous, confusing and unnessacary things I've ever known! Why oh why can't we just have a good ol' SD Card??? (My Droid never ever ran out of storage and I had it for 2 years...)
I tried backing up my photos in Itunes, but I don't have a new enough version. I tried downloading a new itunes and it still tells me I don't have the new version.
I have been working on this for 4 hours, its 2:30 am and I am going to bed. I am sorry I had to ask, but I've been searching and searching and just cannot find the answers. Thank you so much for your help!
6.) Also, I haven't been able to find the videos using the Icloud or the Photo Stream either...
7.) Do you have to have your device (pc) synced with icloud to access the info you backed up from iphone?? Like can I show my cousin my photos at her house using her computer by just loggin on??? Or can I only view my contacts, calender, mail, notifications, and such?
8.) Where on the icloud would one find text messages or other saved info??
Thank you so very much for helping me!!!

What I would say is best is to import the videos and photos to your computer so that you can delete camera roll photos with a copy of them in your possession:
http://support.apple.com/kb/ht4083
In regards to backing up Photo Stream
http://support.apple.com/kb/HT4486:
Does Photo Stream use my iCloud storage?
"No. Photos uploaded to My Photo Stream or Shared Photo Streams do not count against your iCloud storage."
However, you can do the tedious task of moving your camera roll pictures to photo stream by ensuring photo stream is turned on for your device and take a screen shot of each picture in your camera roll to move it over.
To take a screen shot, just press the "Home Button" and the "Sleep/Wake Button" at the same time while viewing the image.
1.) It's not a terrible idea, it can be tedious though.
2.) Deleting a bunch of photos/videos from a camera roll 4.5GB in size can definitely free up space
3.) Photo Stream photos, as you said, appear to stay upon deleting the photos. (Tested it personally)
4.) Photo Stream has a limit according to: (http://support.apple.com/kb/HT4858)
Essentially, it won't erase your photos until you tell it to.
5.) http://support.apple.com/kb/ht4083 (As shown above)
6.) To update iTunes, you must download and then "Run" the download you get off the website. Otherwise you will just have an installer program sitting there not updating iTunes.
7.) You can bring up your Photo Stream pictures anywhere you have Photo Stream capabilities. For a computer at someone else's house, they would have to have the iCloud control panel (http://support.apple.com/kb/dl1455) on their computer and be signed into their Photo Stream and viewing your profile's pictures (http://support.apple.com/kb/ts4379)
8.) On iCloud, you can backup your text messages, but you cannot view them independently on www.icloud.com.
http://support.apple.com/kb/ht4859
"You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails"
Hope some of this information helps!

How to find out where my storage space is going?

So, I have had this MacBook Pro 2009 for the past year, and it has treated me fairly well, so far! I have a question about my Hard Drive Space:
I purchased my laptop with a 250 GB Hard Drive, so I understand that I should get just over 200 GB's of actual storage space. Now I look and it says I have just about 15 gigs remaining. I was absolutely amazed, as I don't feel that I have an excess of programs, music, videos, or anything else to take up all fo the room. I would like to do 2 things, if I could:
1- I would like to be able to find out exactly where my storage has gone. I realize that I could go through and click on every single file and folder, one by one, to see how big it is, but is there an easier way? For example, I would love to see how much space each of my programs are taking up, or see if maybe I have duplicate videos somewhere, etc. Is there an easy way to do this?
2- I have also noticed that, if I uninstall a program, there is usually something left over in my Libraries folder, and in other places. I'm wondering...is there some sort of a disc cleaner, that will delete unnecessary files, hidden things, stuff like that?
Thanks for any/all help! Any suggestions as to how I can free up space on my HDD would be great.

1. Disc Inventory X will show you what's using the space.
2. CleanMyMac will help you delete unwanted and left-over items.

DPM Storage Pool on Windows Server 2012R2 iSCSI target Storage Spaces - supported?

Hi,
for migration purpose we need more space for one of our DPM 2012R2 Servers.
And we cannot buy more space for our NetAPPs..
So our idea was to use an Windows Server 2012R2 as an iSCSI target and use Storage Spaces.
I remember something that using an iSCSI target on Windows 2008 was not supported.
Is this configuration supported when usinf DPM 2012R2 on Win 2012R2 and the target is Win2012R2 aswell?
Thanks in advance
regards
/bkpfast
My postings are provided "AS IS" with no warranties and confer no rights

Hi,
This talks about
Virtual DPM servers, but the same is true for Physical DPM servers when it comes to using .VHD(x) files for DPM storage pool.
Virtual DPM installations do not support the following:
Windows 2012 Storage Spaces.
Virtual hard drives built on top of storage spaces.
Local or remote hosting of VHDX files on Windows 2012 storage spaces.
Enabling Disk Dedupe on volumes hosting virtual hard drives.
Using synthetic FC to connect to tape drives.
Windows 2012 iSCSI targets (which use virtual hard drives) as a DPM storage pool.
NTFS compression for volumes hosting VHD files used in the DPM storage pool.
Bitlocker on volumes hosting VHD files used for the storage pool.
A native 4K sector size of physical disks for VHDX files in the DPM storage pool.
Virtual hard drives hosted on Windows 2008 servers.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

I'm running out of data transfer space?

Anyone help me understand how this fills up, and what it's caused by? I have a QT short movie on my iWebsite, if it matters. Says,
"You are currently using 3.82 GB of 5 GB bimonthly data transfer limit. Find out more about data transfer limits."

Upgrading to the family pack still only gives you 1GB of space, no idea what the data transfer is, but probably still 10GB/month.
From .mac help:
Adding storage
If you're a .Mac member, You can increase your combined email and iDisk storage to a total of 2 GB or 4 GB by purchasing more storage.
Note: If you have a trial membership, email-only account, or Family Pack sub-account, you cannot increase your storage amount.
The cost of upgrading your combined email and iDisk storage is determined by the time remaining in your yearly membership and the amount of storage you already have. For example, if you upgrade your storage space six months before your renewal date, you pay only half the yearly fee.
The cost of the additional space is charged to your credit card. Your purchase will renew automatically as part of your account subscription each year. For pricing information, see ".Mac pricing" in the Membership section of .Mac Help.
To add storage:
1. Go to www.mac.com and log in.
2. Click your member name on the .Mac tab, and then confirm your login.
3. Click Buy More on your Account Settings page.
4. Choose an upgrade option from the Storage pop-up menu, and then click Continue.
5. Review your billing information and click Continue.
6. Review your order and click Buy Now.
7.
8. Wait while your order is processed (it only takes a moment). Don't use your browser to view another page until you see your purchase confirmation.
After you see your purchase confirmation, it takes a few minutes before your new storage is available. When you upgrade your storage, the additional storage you purchased is allocated to your personal iDisk. To learn about setting different storage capacities for .Mac Mail and your iDisk, see "Designating storage."
Your best bet is to add storage, as this increases your bandwith as well,
Upgrade to 2GB of storage = 25GB/month
Upgrade to 4GB of storage = 250GB/month
Follow the steps above (1-4) and it will show you the price for your part of the world.
Will
1GHz G4, 15" PB, 1.5GB RAM, Airport Network, 4 GB iPod Mini (1G), 60GB iPod (5G) Mac OS X (10.4.6)
Help others by marking solved questions as answered ( + Solved or Helpful )

OIM API - Error while retrieving Process form child data

Hi,
I need to read all the child data in a process form.I wrote a piece of code and called it from process task adapter.The values are not getting retrieved and i am getting the error
<tcFormInstanceOperationsBean/isProcessFormChildDataDataUnique: no PRF isKey set up for sdk:203>
When i tested the same code from a standalone cliet,it is working.
Any idea what I am doing wrong here?.Thanks

878153 wrote:
Hi,
I need to read all the child data in a process form.I wrote a piece of code and called it from process task adapter.The values are not getting retrieved and i am getting the error
<tcFormInstanceOperationsBean/isProcessFormChildDataDataUnique: no PRF isKey set up for sdk:203>
This reads: there is no record in the Reconciliation Mapping table (PRF) for child Form (SDK table, key 203) containing the name of the column in the child form which refers the record in the parent Form.
The failed SQL query is as follows:
select prf_columnname from prf where sdk_key=203 and prf_iskey='1'
Probably you've passed the wrong child form Form?
Regards,
Vladimir

Ical server Attachment "(null)" in event "xyz" was rejected by the server because of insuffient storage space

We are moving our stand alone iCal files to a Lion Server. We have alot of attachement for several events. After importing several calendars we are getting this error. What shall we do? What storage is this? the server new and has two disks with 1TB of free space. So, I am thinking this has to do with the iCal database on the server. I don't see any server based configuration for iCal storage or database configuration?

I have found this,
Use serveradmin via the Terminal app to set the quota limits.
sudo serveradmin set calendar:UserQuota = "<FileSize>" sudo serveradmin set calendar:MaxCollectionsPerHome = "<Number>" sudo serveradmin set calendar:MaxResourcesPerCollection = "<Number>" sudo serveradmin set calendar:MaxResourceSize = "<FileSize>"
from Apple web site. http://help.apple.com/advancedserveradmin/mac/10.7/#apd6D0912A5-D9F2-422D-ACF1-F 1360662A6F8
So, I will try tomorrow and let you know.

Is there a way to access iCloud to find out how much storage space I need to install music on iPhone? Genius Bar was not very helpful...

I have several questions I could not get answered yesterday...
Does the number of songs listed on iPhone represent music available on iPhone or in iCloud.
How do find out how much space of music you have in iCloud you need for iPhone to download all music?
Is there a easier way to get the music available in iCloud downloaded to iPhone without separately downloading each album separately?
Last question...if the music is not downloaded...does it get played at all when on wi-fi?

Gordon49 wrote:
I have several questions I could not get answered yesterday...
Does the number of songs listed on iPhone represent music available on iPhone or in iCloud.
Both. If you have the setting to "show all music" set to ON you will see all music that is available. If the setting is set to OFF you will only see music that is stored locally on the device.
Gordon49 wrote:
How do find out how much space of music you have in iCloud you need for iPhone to download all music?
iTunes Match does not use your iCloud storage.
Gordon49 wrote:
Is there a easier way to get the music available in iCloud downloaded to iPhone without separately downloading each album separately?
Music can be downloaded by Album, Artist or Playlist. Or you can disable iTM, sync music via USB, then re-enable the iTM service.
Gordon49 wrote:
Last question...if the music is not downloaded...does it get played at all when on wi-fi?
Yes.

I ran out of photo storage space while traveling, so I don't have my laptop. How to make more room (besides deletion)?

There's no more room on my iphone, and I won't have a laptop for another month. I thought turning on icloud on my phone would do the trick, but nothing is happening. I don't want to delete my summer-long trip photos! Any solutions are appreciated.

i use dropbox when on the go. you can upload straight from your iPhone.

Storage Spaces on WS2012R2 Server Essentials drive space error

So, I finally bit the bullet and retired my V1 Home Server in favor of building out a Windows Server 2012R2 Server Essentials box as a replacement. All seemed to go well with the install and so I built out a Storage Space (16 TB) using an external 8-bay
enclosure with about 14 TB of drives in it. The Space built out fine and I then moved my Server Folders to it which also went well.
At that point, I attached my 4 TB external drive that had my movie backups on it and started copying them over. After about a day and a half it is done, or so I thought. It copied over about 3.2 TB of data and now when I try to copy basically anything onto
the Storage Space, I get the following error message:
There is not enough space on <folder name>
xx.x GB is needed to copy this item. Delete or move files so you have enough space.
<folder name> is whatever the target folder name is and xx.x is whatever size the file or files add up to.
This then just has an option to Try Again, Skip or Cancel. Problem is, the drive only has a few TB of data on it and still shows mostly empty, yet I can't copy hardly anything to it. It seems to allow me to copy smaller files individually, but any larger
group of files, or a folder with larger files in it yield the error above.
Anybody have any ideas?

Hi,
What is the resiliency type of the virtual disk in the Storage Spaces? How much the free space of the virtual disk? The issue may because the free space of the virtual disk is less than 4 TB.
You could refer to the articles below to know more about the virtual disk size of different resiliency types:
Storage Spaces - Designing for Performance
https://social.technet.microsoft.com/wiki/contents/articles/15200.storage-spaces-designing-for-performance.aspx
Using the Storage Pools page in Server Manager to create storage spaces
http://blogs.technet.com/b/filecab/archive/2012/12/06/using-the-storage-pools-page-in-server-manager-to-create-storage-spaces.aspx
Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NI MAX throughput error and Camera attribute out of range

I recently purchased a Point Grey Grasshopper3 camera, it seems to work fine in the Fly Cap software point grey provides, but I get an error in NI MAX when I try to do a simple grab (shown below). This error shows up every time I try to grab an image the first time after opening NI MAX, even though throughput is set to the max. Then I change the throughput max under device control to any number around the max of 125000000, and the camera works fine for MAX. It will grab images as much as I need. Then I save the camera, exit MAX, open MAX again, it shows my saved settings, I go to grab images and I get the error again. So I change the range to whatever number and it works again in the same session in MAX.
I did have a point grey Zebra2 working fine, and was using it in my LabVIEW program with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns an error of camera attribute out of range from the camera configuration VI. The VI's I am using to test the camera is just open camera, configure acquisition, start acquisition, get image, unconfigure acquisition, and close camera from IMAQdx. I did twice open MAX, change throughput, save camera, close MAX without grabbing an image, and then was able to acquire images in LabVIEW on the first run. Then I would run the VI again and it would return the error for camera attribute out of range. I have changed the packet size, resolution, and frame rate of the camera with out noticing a difference in the errors.
Since I am able to stream images from the camera in point greys fly capture, and in MAX after toggling the throughput setting, it leads me to believe there is some sort of MAX/LabVIEW error preventing me from capturing the images.
Any ideas? Has anyone else had this issue with MAX and LV?
Solved!
Go to Solution.
Attachments:
MAX error.png ‏17 KB

It looks like Point Grey cameras have shown this error before based on out of date firmware. See this link for one such instance. I would monitor the camera file (*.icd) located in the IMAQdx data folder in Public Documents to see if the actual value is being overwritten after the camera configuration is saved in MAX. There is a chance that the GigE .XML file that is transferred from the camera is overwriting these values to the unacceptable value. See this link for a KB regarding this error, which leads me to believe this may be the issue.
Karl G.
Applications Engineer
ni.com/support

R3-XI: Cache Contents Out-Of-Date in SXI_CACHE

Hi
When i execute the trx code SXI_CACHE in my R3 system i get an error message "Cache Contents Out-Of-Date". Any hints to solve this issues pls....
thkx
P.S

Hi,
Try to do full cache refresh by url if it works...
_http://<host>:5<sys#>00/CPACache/refresh?mode=full_
Also, have a look at this blog :
Cache Refresh Errors - New Phenomena
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards,
Chandra

ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space

Similar Messages

Maybe you are looking for